MCP3426A6-E/SN - 16-Bit Dual-Channel ADC | Microchip
부품 번호: MCP3426A6-E/SN ✓ 활성MCP3426A6-E/SN 개요
A sigma-delta ADC is a voltage-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to provide high resolution and low noise. It belongs to the ADC hierarchy within data-converter and mixed-signal semiconductors. The MCP3426 family is designed for precision measurement of low-frequency, differential analog signals where low noise, high resolution, and integrated references are more important than high-speed waveform capture.
The MCP3426A6-E/SN provides up to 16-bit resolution across two channels. Its differential architecture rejects common-mode noise when the source is arranged around a defined common-mode voltage, while the internal 2.048 V reference defines a nominal full-scale differential range of ±2.048 V. A 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V systems. The device also supports an extended operating temperature range of -55 °C to +125 °C.
The A6 configuration is identified by a nominal 15 samples-per-second conversion rate in distributor technical data. This rate is appropriate for slow-changing process variables, temperature, pressure, load-cell, and instrumentation signals rather than audio-rate or high-speed industrial acquisition. An integrated ADC should be paired with an input filter, clean reference routing, and careful grounding to preserve the benefit of its high resolution.
Typical uses include differential sensor measurement, industrial pressure and temperature acquisition, bridge-sensor instrumentation, low-frequency process monitoring, and portable measurement systems. Because the converter has two input channels, it can measure two related voltages or a differential sensor while retaining the same reference and conversion architecture.
Layout is especially important because high-resolution conversion is sensitive to small analog voltages. Place input and reference components close to their associated pins, use a quiet ground return, isolate digital communication from sensitive input traces, and avoid routing analog inputs beneath switching nodes. The manufacturer datasheet remains the controlling document for bypass capacitance, input-voltage limits, conversion timing, and pin assignments.
This product page combines the manufacturer device description, distributor technical attributes, pricing records, package details, and engineering guidance into a focused selection resource. It also documents where equivalent and cross-reference information is incomplete, helping engineers distinguish true drop-in interchangeability from devices that merely perform a similar conversion function.
드롭인 대체품: MCP3426A6-E/SN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCP3426A6-E/SN (동일 폼 팩터 및 풋프린트) — 차이점: Package, Number of Input Channels, Differential Input Range, Resolution, ADC Type.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MCP3426A6-E/SN 최대 정격 & 전기적 특성
| 분해능 | 16 bit |
| Number of Input Channels | 2 channels |
| Input Architecture | Differential input |
| ADC Architecture | 1-channel delta-sigma per conversion path, dual-channel device |
| Conversion Rate | 15 samples/s |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Minimum Supply Voltage | 2.7 V |
| Maximum Supply Voltage | 5.5 V |
| Nominal Supply Voltage | 3.3 V or 5 V |
| Minimum Operating Temperature | -55 °C |
| Maximum Operating Temperature | +125 °C |
| 패키지 | 8-pin SOIC |
| 실장 유형 | Surface mount |
| RoHS Compliance | RoHS3 compliant |
| REACH Status | Unaffected |
| Moisture Sensitivity Level | MSL Level 1 |
MCP3426A6-E/SN 8-pin soic 핀 구성 가이드
MCP3426A6-E/SN(8-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCP3426A6-E/SN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCP3426A6-E/SN 적합 용도: 6 애플리케이션s: Industrial Pressure and Temperature Sensing, Load-Cell and Bridge Instrumentation, Medical and Physiological Monitoring, Portable Environmental Monitoring, Precision Test and Measurement, Power-Supply and Battery Monitoring.
Industrial Pressure and Temperature Sensing
The MCP3426A6-E/SN fits slow-changing pressure, temperature, and process-variable channels that require 16-bit resolution and differential input handling. Its two differential channels can acquire a conditioned sensor and a reference or related measurement, while the internal 2.048 V reference supports a ±2.048 V nominal input range. At 15 sample/s, the converter is appropriate for thermal and pressure systems whose signals change over seconds or slower. The principal design task is ensuring sensor excitation, common-mode voltage, input noise, and grounding remain compatible with the converter’s electrical limits.
추천
Load-Cell and Bridge Instrumentation
The MCP3426A6-E/SN is suitable for differential bridge measurements where small millivolt-level changes must be resolved against a larger common-mode voltage. Two differential inputs support bridge and reference acquisition, and the 16-bit conversion resolution preserves fine measurement detail. Its 15 sample/s rate suits static weighing, force, and displacement systems rather than high-speed vibration analysis. Use a low-noise instrumentation amplifier such as MCP6071-E/SN, carefully ground the bridge and converter, and confirm the configured gain and common-mode limits from the manufacturer data sheet.
추천
Medical and Physiological Monitoring
The MCP3426A6-E/SN can serve as the ADC stage in low-frequency physiological monitoring equipment when the front end keeps signals within the converter’s input and common-mode limits. Its dual differential architecture is useful for sensing paired electrodes or a differential sensor plus reference, and the 16-bit resolution supports detailed digital representation. The 15 sample/s rate is appropriate for slowly varying parameters such as temperature, respiration, or biochemical-sensor outputs. A medical design must independently validate accuracy, patient protection, isolation, and regulatory requirements beyond the ADC’s electrical ratings.
추천
Portable Environmental Monitoring
The MCP3426A6-E/SN supports compact environmental sensors that report temperature, humidity, gas, or light levels through low-bandwidth analog channels. Its 2.7 V to 5.5 V operating range accommodates battery-powered 3.3 V equipment as well as 5 V systems, and the integrated 2.048 V reference reduces the number of external precision components. Two differential inputs provide flexibility for a sensor plus reference arrangement. At 15 sample/s, the device prioritizes resolution and noise performance over rapid response, making it most appropriate for slow environmental trends rather than transient events.
추천
Precision Test and Measurement
The MCP3426A6-E/SN is useful in laboratory and production equipment that measures slow-changing voltages with high resolution. Its 15 sample/s conversion rate is sufficient for calibration, monitoring, and status measurements, while the internal 2.048 V reference provides a convenient conversion scale for a ±2.048 V differential range. Two channels allow related quantities to be acquired consistently. Designers should still account for analog-front-end offset, noise, source impedance, and digital filtering, and should use the pinout and application circuit in the Microchip family data sheet for implementation details.
추천
Power-Supply and Battery Monitoring
The MCP3426A6-E/SN can monitor two differential voltages in power systems, including a scaled supply rail or battery cell versus a reference. Its 16-bit resolution can reveal small changes that are difficult to observe with lower-resolution converters, and the differential inputs help reject shared supply noise. The 15 sample/s rate is suitable for supervisory rather than high-bandwidth protection tasks. Confirm that every monitored voltage remains within the absolute input limits, use an appropriate divider or front-end amplifier, and avoid allowing measurement circuitry to disturb the power rail being monitored.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCP3426A6-E/SN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 8-pin SOIC |
| Brand | Microchip Technology |
| Resolution | 16 bit |
| Input Channels | 2 channels |
| Input Type | Differential |
| Conversion Architecture | Sigma-delta |
| Conversion Rate | 15 samples/s |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Internal Reference | 2.048 V |
| Differential Input Range | ±2.048 V |
| Operating Temperature Range | -55 °C to +125 °C |
주요 차별점
- Two-channel differential measurement in a standard SOIC-8 footprint (vs MCP3426A6-E/MS)
- Integrated precision reference simplifies analog design (vs External-reference ADC implementations)
- High resolution optimized for slow sensor signals (vs Faster delta-sigma ADCs)
설계 노트
Route the two analog inputs away from digital communication and switching traces, using a quiet analog ground region and the shortest practical input paths. Place input filtering, amplifier, and reference components close to the relevant converter pins. Because a 16-bit converter can resolve very small voltage changes, even a few millivolts of coupling into a sensitive input can affect the result. Use a solid ground plane while avoiding split-plane returns that force analog current to cross noisy digital paths.
Design the analog front end for the source impedance and the selected gain. Differential inputs should share a controlled common-mode voltage, and their absolute voltages must remain within the device limits during startup, fault conditions, and full-scale transitions. Use an amplifier such as MCP6071-E/SN when source impedance is high or common-mode rejection requirements exceed the sensor interface’s capability. Check settling and filter time against the 15 sample/s conversion schedule.
Decouple the converter supply close to its supply and ground pins using the capacitance values specified in the Microchip MCP3426/7/8 data sheet, document 22226a. Keep the 2.048 V internal-reference path quiet and avoid routing it alongside switching-regulator outputs. If the supply can overshoot or fall outside 2.7 V to 5.5 V, add appropriate protection before the ADC. Verify the actual operating mode and conversion activity against the family data sheet before estimating average power consumption.
Do not treat MCP3426A6-E/MS as a drop-in substitute for MCP3426A6-E/SN: the former uses an 8-DFN package and the latter uses an 8-pin SOIC. Likewise, confirm the exact ordering code before treating any same-family suffix as interchangeable. The A6 designation identifies the 15 sample/s configuration, so changing gain or conversion option can alter sensitivity and acquisition time even when the land pattern appears identical.
규정 준수 정보
Cross-reference information identifies the MCP3426 family as RoHS3 compliant, REACH unaffected, and MSL Level 1. No separate automotive qualification, lead-free declaration, halogen-free declaration, or conflict-minerals statement was established for this exact ordering code.