NXP Semiconductors

MKL15Z64VFM4 - 48MHz Cortex-M0+ 64KB MCU | NXP

부품 번호: MKL15Z64VFM4 ✓ 활성
3.3 V Vdss 32-HVQFN, 5 x 5 mm Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

MKL15Z64VFM4 개요

The NXP Semiconductors MKL15Z64VFM4 is a general-purpose 32-bit Arm Cortex-M0+ Kinetis KL1 microcontroller operating at 48 MHz, with 64 KB of flash memory and 8 KB of SRAM in a 32-HVQFN 5 x 5 mm package. It combines an ultra-low-power MCU architecture with integrated analog, communication, timer, and GPIO resources for compact embedded systems.

A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals onto one package. The MKL15Z64VFM4 belongs to the Kinetis KL1 family hierarchy of Cortex-M0+ microcontrollers, within the broader embedded processor and semiconductor categories. Its general-purpose design is intended for battery-powered appliances, industrial modules, portable equipment, and connected control products where compactness, energy efficiency, and deterministic peripheral access are important.

Three headline features define this device: a 48 MHz Cortex-M0+ processing core, 64 KB of program flash, and a 32-HVQFN 5 x 5 mm surface-mount package. The 8 KB SRAM provides working memory for protocols, control state, and application tasks. A 3.3 V operating supply is identified for the device, while the exact low-power operating modes, analog performance, and current-consumption limits should be confirmed in the NXP datasheet before a power-budget sign-off.

The Arm Cortex-M0+ architecture supports compact code while retaining the interrupt-driven, deterministic behavior required by embedded control systems. Integrated peripherals make it possible to reduce the number of external components in sensing, communications, timer-based control, and general digital I/O designs. The 5 x 5 mm HVQFN footprint also preserves access to a thermal or exposed pad and supports dense PCB layouts, but its fine pitch demands careful assembly planning.

Typical applications include energy-efficient sensor nodes, industrial monitoring modules, small motor-control boards, battery-powered accessories, and connected home products. In these systems, the MCU can execute control logic, supervise inputs, service communication peripherals, and schedule tasks without requiring a separate processor. The 48 MHz clock provides additional compute margin over slower general-purpose microcontroller families while retaining the low-power orientation of the Kinetis KL1 series.

Designers should place decoupling capacitors close to the supply pins, route the exposed-pad area according to the land-pattern guidance, and verify signal-level limits before attaching external sensors or communications modules. Firmware development must use the supported Arm Cortex-M toolchain, programming interface, clock configuration, and peripheral initialization sequence described by NXP.

This page combines the exact device identity, core and memory characteristics, package information, migration-oriented alternatives, and practical implementation guidance. It helps engineers distinguish the MKL15Z64VFM4 from other Kinetis devices while identifying when a pin-compatible KL-family change can simplify sourcing without altering the PCB footprint.

드롭인 대체품: MKL15Z64VFM4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MKL15Z64VFM4 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, Product Family, Product Type, Architecture.

NXP Semiconductors
Flash Memory: 64 KB
Product Family: NXP Kinetis KL1 sub-family
Product Type: 32-bit ARM Cortex-M0+ microcontroller
비교 대상: MKL15Z64VFM4 →
NXP Semiconductors
Flash Memory: 64 KB (64K x 8 bits)
Package: 32-HVQFN (5 mm x 5 mm)
Product Family: Kinetis KL25 / Kinetis KL2
비교 대상: MKL15Z64VFM4 →
NXP Semiconductors
Flash Memory: 64 KB (64K x 8)
Package: 32-HVQFN (5x5 mm) with exposed pad
Product Family: Kinetis KL2x (Kinetis L)
비교 대상: MKL15Z64VFM4 →

MKL16Z64VFM4

✅ 드롭인 ⚠️ 사양 미검증
NXP Semiconductors
📦 32-HVQFN (5x5)
32-bit ARM Cortex-M0+ microcontroller · NXP Kinetis KL1 sub-family · 48 MHz · 64 KB · 64K x 8 bits · ARM Cortex-M0+ · 32 bits · 1.8 V, 2.5 V, or 3.3 V

가격 문의

데이터시트 보기 →

MKL15Z128VFM4

✅ 드롭인 ⚠️ 사양 미검증
📦 32-HVQFN (5x5)
Retains the KL15 core and package, with 128 KB flash versus 64 KB, a 64 KB or 100% increase in program memory

📋 참조 대체품 (카탈로그에 없음)

MKL15Z256VFM4

✅ 드롭인 ⚠️ 사양 미검증
📦 32-HVQFN (5x5)
Retains the KL15 core and package, with 256 KB flash versus 64 KB, a 192 KB or 300% increase in program memory

📋 참조 대체품 (카탈로그에 없음)

MKL25Z64VFM4

✅ 드롭인 ⚠️ 사양 미검증
NXP Semiconductors
📦 32-HVQFN (5x5)
32-bit ARM Cortex-M0+ microcontroller · Kinetis KL25 / Kinetis KL2 · 48 MHz · ARM Cortex-M0+ · 32-bit RISC · 64 KB (64K x 8 bits) · 8 KB · Full-speed USB 2.0

가격 문의

데이터시트 보기 →

MKL46Z64VFM4

✅ 드롭인 ⚠️ 사양 미검증
📦 32-HVQFN (5x5)
Retains the 48 MHz and 64 KB flash classes but changes the processor from Cortex-M0+ to Cortex-M4 and adds a different peripheral set

📋 참조 대체품 (카탈로그에 없음)

MKL15Z64VFM4 최대 정격 & 전기적 특성

Product Type General-purpose 32-bit microcontroller
Processor Core Arm Cortex-M0+
Architecture 32-bit
Maximum CPU Frequency 48 MHz
Program Flash Memory 64 KB
Flash Organization 64K x 8 bits
SRAM 8 KB
동작 공급 전압 3.3 V
패키지 32-HVQFN, 5 x 5 mm
실장 유형 Surface mount
Microcontroller Series Kinetis KL1
Power Orientation Ultra-low-power general-purpose MCU

MKL15Z64VFM4 32-hvqfn, 5 x 5 mm 핀 구성 가이드

MKL15Z64VFM4(32-hvqfn, 5 x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MKL15Z64VFM4의 32-hvqfn, 5 x 5 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MKL15Z64VFM4.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MKL15Z64VFM4 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Nodes, Industrial Monitoring Modules, Portable Home Appliances, Connected Communications Module, Small Motor and Timing Controller, Medical and Laboratory Instrument Control.

🧩

Battery-Powered Sensor Nodes

The MKL15Z64VFM4 fits compact battery-powered sensor nodes because its 48 MHz Cortex-M0+ core can service time-based sampling, filtering, and local control while the Kinetis KL1 family emphasizes low-power operation. The 64 KB of flash accommodates application firmware, configuration data, and a communication state machine, while 8 KB of SRAM provides working space for samples and protocol buffers. Place the device beside the sensor circuitry, use the low-power modes only after confirming wake sources and timing in the NXP data sheet, and size the decoupling network for stable operation across the 3.3 V supply. Its 5 x 5 mm HVQFN package also reduces board area compared with larger leaded MCU packages.

🏭

Industrial Monitoring Modules

The MKL15Z64VFM4 is appropriate for industrial monitoring modules that combine sensor acquisition, threshold control, event logging, and a local communications interface. Its 48 MHz Cortex-M0+ processing capability provides margin for digital filtering and protocol servicing, while 64 KB of flash and 8 KB of SRAM support structured firmware without requiring an external memory device. Use the GPIO and timer resources for discrete inputs and periodic tasks, and validate the ADC, communication ports, and operating-temperature limits against the exact KL15 data sheet. The small 32-HVQFN 5 x 5 mm land pattern supports compact DIN-rail or panel-mounted assemblies, provided that assembly processes can reliably handle the fine pitch and exposed pad.

📱

Portable Home Appliances

The MKL15Z64VFM4 can serve as the central controller in a portable home appliance where a low-power MCU, compact package, and moderate on-chip memory are more useful than a high-performance application processor. The 48 MHz Cortex-M0+ core can manage button inputs, motor timing, indicators, and a low-rate communications task, while 64 KB of flash and 8 KB of SRAM support a structured control application. Keep motor-current paths and switching nodes away from sensitive analog traces, and use the exposed-pad land pattern for thermal and electrical performance as specified by NXP. Firmware should use low-power modes deliberately because wake latency, run-time current, and peripheral shutdown behavior determine battery life.

🌐

Connected Communications Module

The MKL15Z64VFM4 is well matched to a connected communications module that uses the MCU for framing, address management, status reporting, and control of a radio or network interface. At 48 MHz, the Cortex-M0+ core has sufficient throughput for many serial protocols and background state machines, while 64 KB of flash can hold protocol stacks and configuration. The 8 KB of SRAM is sufficient for typical frame buffers when packet sizing is controlled carefully. Use the NXP pin table to select the appropriate UART, SPI, or I2C pins, isolate high-current radio supplies from the MCU rail, and check the exact clock and peripheral features of the KL15 device. Firmware should include robust framing, timeout, and retry handling rather than relying on the protocol peripheral alone.

🔧

Small Motor and Timing Controller

The MKL15Z64VFM4 can control small motors, valves, relays, or precision timing sequences where the required processing fits within a general-purpose Cortex-M0+ MCU. The 48 MHz core supports responsive timer calculations and deterministic event sequencing, while the 64 KB flash and 8 KB SRAM provide room for motion profiles and safety checks. Relays and motors must be driven through suitable external transistor or driver circuitry because the MCU pins are control signals, not direct load drivers. Validate pulse-width, voltage, and timing limits from the NXP documentation, add flyback protection, and keep high-current switching loops compact. For multi-axis motion or higher-performance control, reconsider the MCU class before committing the PCB.

💊

Medical and Laboratory Instrument Control

The MKL15Z64VFM4 can support the supervisory control section of compact laboratory or medical instruments when the system requires deterministic digital control and communication. The 48 MHz Cortex-M0+ core can manage status sequencing, user-interface events, logging, and communications, while 64 KB of flash and 8 KB of SRAM support a focused embedded application. It should not control high-energy therapeutic or diagnostic functions unless the complete system architecture, isolation, safety controls, and regulatory validation are independently established. Confirm the exact ADC characteristics, timing limits, and temperature range in the NXP data sheet, and use galvanic isolation where patient protection or measurement integrity requires it. The compact 5 x 5 mm package helps reduce instrument volume without eliminating the need for careful grounding and EMC design.

What are the key specifications of MKL15Z64VFM4 that engineers should know?
The MKL15Z64VFM4 combines a 48 MHz Arm Cortex-M0+ core, 64 KB of flash memory, 8 KB of SRAM, and a 3.3 V supply in a 32-HVQFN 5 x 5 mm package. According to the NXP product information, it is a general-purpose Kinetis KL1 microcontroller and is listed as active. These characteristics make it suitable for compact embedded products requiring moderate processing performance, fast GPIO access, and low-power-oriented operation without a larger application processor.
What is the MKL15Z64VFM4 used for?
The MKL15Z64VFM4 is used for compact embedded control, sensing, timing, communications, and low-power product designs. Its 48 MHz Cortex-M0+ core can execute control logic and peripheral tasks, while 64 KB of flash stores firmware and 8 KB of SRAM supports working state. According to NXP, the Kinetis KL1 family is a general-purpose ultra-low-power MCU family positioned for applications that require more resources than the KL0x family without moving to a high-end Cortex-M4 processor.
Where can I download the MKL15Z64VFM4 datasheet PDF?
The official MKL15Z64VFM4 datasheet is linked from the NXP product page at https://www.nxp.com/part/MKL15Z64VFM4. The NXP product page identifies the part as active and provides the manufacturer data sheet under its Data Sheet section. According to NXP, the document covers the KL15 sub-family and should be used for final pin definitions, electrical limits, clock settings, peripheral behavior, programming procedures, and PCB land-pattern requirements.
Where can I find the MKL15Z64VFM4 pinout?
The MKL15Z64VFM4 pinout is defined in the pin-description section and package drawing of the NXP KL15 sub-family data sheet linked from the product page. The device uses a 32-HVQFN 5 x 5 mm package, so there are 32 numbered positions in addition to any exposed-pad connection shown in the land pattern. Use the NXP pin-description table when assigning VDD, VSS, reset, clock, debug, communication, and GPIO functions to PCB tracks.
Where can I buy MKL15Z64VFM4 online?
The MKL15Z64VFM4 can be requested through the Request a Quote form on this page for the exact 32-HVQFN 5 x 5 mm orderable configuration. The NXP product page identifies the device as active, but current order quantities and delivery schedules should be confirmed through that form before committing a production build. The request should state the required quantity, shipment destination, target date, and whether reels, trays, or another approved packing format are needed.
What is the price of MKL15Z64VFM4?
Use the Request a Quote form on this page for the current unit price and quantity breaks for MKL15Z64VFM4. Pricing depends on order quantity, packing format, current inventory, destination, and component availability. The NXP product page identifies the exact MPN as active, so request the quotation using the complete suffix MKL15Z64VFM4 rather than a shortened family designation to avoid receiving a package, temperature, or order-option mismatch.
What is the lead time for MKL15Z64VFM4?
The current lead time for MKL15Z64VFM4 should be requested through the Request a Quote form on this page using the required quantity and delivery date. Lead time can change with order size, component inventory, and production scheduling, even though NXP lists this exact part as active. For new designs, request a schedule that includes component allocation, incoming inspection, and the planned PCB assembly date so material risk is visible before release.
Is MKL15Z64VFM4 in stock?
Submit the exact MKL15Z64VFM4 requirement through the Request a Quote form on this page to confirm current availability and the proposed delivery schedule. The NXP product page lists the device as active, but lifecycle status alone does not guarantee inventory for a particular quantity or packing format. State the desired shipment date and reel or tray requirements in the request so the quotation reflects the configuration needed for assembly.
MKL15Z64VFM4 vs MKL16Z64VFM4 - which is better for a low-power design?
Choose MKL15Z64VFM4 when a 48 MHz Cortex-M0+ processor and the KL15 feature set are specifically required; choose the KL16 variant when its additional peripheral resources are needed while retaining a similar low-power architecture. According to NXP, the KL1x family provides a migration path across KL1x, KL2x, KL3x, and KL4x devices, but the data sheets must be compared for UART, SPI, I2C, analog, timer, and pin-function differences before firmware or board changes are committed.
What is the difference between MKL15Z64VFM4 and MKL25Z64VFM4?
The MKL15Z64VFM4 is the KL15 general-purpose Cortex-M0+ device, while MKL25Z64VFM4 belongs to the KL25 family and provides a different peripheral mix. NXP positions KL1x as the entry point into the broader Kinetis low-power range and describes family migration compatibility, but pin compatibility does not guarantee identical interrupt mappings or peripheral registers. Check the NXP data sheets for the exact peripheral set, analog functions, clock tree, and software-support requirements before selecting the replacement.
When should I choose MKL15Z64VFM4 over another Kinetis microcontroller?
Choose MKL15Z64VFM4 when the design requires a 48 MHz Cortex-M0+ core, 64 KB flash, 8 KB SRAM, and the 32-HVQFN 5 x 5 mm footprint in one compact package. It is a practical fit for general-purpose low-power control where a higher-performance Cortex-M4 core is unnecessary. Select a different Kinetis model when it provides a required communications interface, analog feature, larger memory configuration, security capability, or operating temperature that the KL15 device does not offer.
Is MKL15Z64VFM4 suitable for industrial sensor modules?
The MKL15Z64VFM4 is suitable for compact industrial sensor modules that need general-purpose processing, deterministic peripherals, and low-power operation. Its 48 MHz Cortex-M0+ core, 64 KB flash, and 8 KB SRAM are sufficient for many acquisition, filtering, conditioning, and communications-control tasks. Before deployment, verify the exact GPIO count, ADC performance, serial-interface availability, temperature range, and isolation requirements in the NXP KL15 sub-family data sheet.
What can replace the MKL15Z64VFM4?
The closest replacements are NXP Kinetis devices that retain the 32-HVQFN 5 x 5 mm footprint and provide comparable core speed, memory, and pin functions. MKL16Z64VFM4 is a close hardware-oriented option within the same 48 MHz, 64 KB class, while MKL15Z128VFM4 and MKL15Z256VFM4 preserve the KL15 family architecture with larger flash. Firmware migration is still required because peripheral sets and memory organization can differ, so review the device pin and reference-manuscript tables before replacement.
What is the best NXP equivalent for MKL15Z64VFM4?
The best NXP equivalent depends on which constraints must remain unchanged. MKL16Z64VFM4 is the closest listed match for a device retaining 48 MHz operation, 64 KB flash, and the 32-HVQFN 5 x 5 mm footprint. NXP states that the KL1x family provides a migration path within the Kinetis low-power portfolio. Treat this as a hardware migration candidate rather than a firmware-identical part, and verify every pin, peripheral, clock, and software requirement against the relevant NXP data sheet.
Is MKL15Z64VFM4 the same as MKL16Z64VFM4?
The MKL15Z64VFM4 and MKL16Z64VFM4 are closely related Kinetis KL1x devices with the same 48 MHz class, 64 KB flash class, and 32-HVQFN 5 x 5 mm package, but they are not identical in every functional detail. According to NXP, KL1x devices support family migration, yet the exact peripheral mix and software implications vary by device. Confirm the replacement using the NXP pin table, peripheral matrix, clock configuration, and application migration documentation before production use.

엔지니어링 참조 데이터: MKL15Z64VFM4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MKL15Z64VFM4 for a compact, low-power general-purpose design that needs a 48 MHz Cortex-M0+ core, 64 KB flash, 8 KB SRAM, and a 32-HVQFN 5 x 5 mm footprint. Choose MKL16Z64VFM4 when the PCB can remain unchanged and the KL16 peripheral set offers useful additional interfaces. Choose MKL15Z128VFM4 or MKL15Z256VFM4 when the KL15 architecture is preferred but application growth requires more program memory. Choose MKL25Z64VFM4 when expanded Kinetis low-power functionality is needed, and consider MKL46Z64VFM4 when Cortex-M4 processing justifies a broader firmware migration. For every alternative, verify the NXP pin table, peripheral matrix, clock configuration, and exposed-pad layout. A matching package reduces board changes but does not guarantee identical firmware or peripheral behavior.

대체품과의 비교

파라미터 이 제품 MKL16Z64VFM4 MKL15Z128VFM4 MKL15Z256VFM4 MKL25Z64VFM4 MKL46Z64VFM4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 32-HVQFN (5x5) 32-HVQFN (5x5) 32-HVQFN (5x5) 32-HVQFN (5x5) 32-HVQFN (5x5) 32-HVQFN (5x5)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M4
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Program Flash Memory 64 KB 64 KB 128 KB 256 KB 64 KB 64 KB
Device Family Kinetis KL15 Kinetis KL16 Kinetis KL15 Kinetis KL15 Kinetis KL25 Kinetis KL46
Specialized Feature Emphasis General-purpose ultra-low-power KL1 device Expanded KL1 peripheral set Same KL15 family with doubled flash Same KL15 family with quadrupled flash Expanded Kinetis low-power feature set Cortex-M4 processing capability

주요 차별점

  • Combines Cortex-M0+ processing with a compact 5 x 5 mm footprint (vs MKL46Z64VFM4)
  • Exact 64 KB flash match for close hardware migration (vs MKL16Z64VFM4)
  • Lower flash capacity provides a clear cost-and-memory distinction (vs MKL15Z256VFM4)
  • General-purpose KL15 feature positioning (vs MKL25Z64VFM4)

설계 노트

Use the NXP recommended decoupling network and place each capacitor directly between the relevant power and ground pins. Keep the 3.3 V supply within the limits defined in the KL15 data sheet, including allowable startup, transient, and noise conditions. For battery-powered products, calculate average current from run, sleep, and wake periods rather than using active-mode current alone. Confirm which clocks and peripherals remain powered in each low-power state because a disabled communications peripheral can materially change the system energy budget.

Follow the manufacturer's 32-HVQFN 5 x 5 mm land pattern exactly, including the exposed-pad geometry and thermal-via recommendation. The package has 32 fine-pitch perimeter pins plus the exposed pad, so verify the PCB library against the current NXP package drawing before release. Provide adequate solderable area without allowing excess solder wicking toward the perimeter, and use an assembly process capable of handling the pitch. Keep the pad and via field electrically connected as directed by NXP rather than assuming it is only a thermal feature.

Assign sensitive analog and communication signals from the datasheet pin table before routing the board. Place external crystal or clock components, if used, close to the relevant oscillator pins with short ground returns; keep switching nodes and high-current load paths away from the MCU and analog inputs. Route the exposed-pad connection on multiple layers if recommended to spread heat while preserving continuity. A compact ground plane beneath the device improves return-path continuity, but plane interruptions beneath fast or high-current nodes should be avoided.

Do not treat a Kinetis family migration as a firmware-identical substitution. Even when the package and selected electrical ratings match, pin multiplexing, interrupt assignments, clock-tree settings, peripheral registers, and startup code can differ between KL15, KL16, KL25, and KL46 devices. Compare the exact NXP pin table and reference manual, recreate the clock and peripheral initialization, and run boundary tests for timing, low-power transitions, communications, and brownout recovery before approving a replacement for production.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The NXP product page identifies MKL15Z64VFM4 as active. Specific environmental-quality and material-compliance declarations should be confirmed using the compliance documents associated with the exact NXP orderable MPN.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MKL15Z64VFM4 datasheet MKL15Z64VFM4 specifications MKL15Z64VFM4 pinout MKL15Z64VFM4 datasheet pdf MKL15Z64VFM4 equivalent MKL15Z64VFM4 replacement MKL15Z64VFM4 footprint MKL15Z64VFM4 application circuit MKL15Z64VFM4 vs MKL16Z64VFM4 NXP MKL15Z64VFM4 MKL15Z64VFM4 price MKL15Z64VFM4 stock MKL15Z64VFM4 lead time 32 HVQFN Kinetis KL15 pinout

관련 부품 & 용어

NXP Semiconductors MKL15Z64VFM4 MKL16Z64VFM4 MKL15Z128VFM4 MKL15Z256VFM4 MKL25Z64VFM4 MKL46Z64VFM4 Arm Cortex-M0+ Arm Cortex-M4 microcontroller embedded microcontroller Kinetis KL1 Kinetis low-power MCU 32-bit microcontroller 32-HVQFN QFN package family surface-mount package 64 KB flash memory 8 KB SRAM 48 MHz CPU clock 3.3 V supply ultra-low-power MCU sensor node industrial monitoring communications module
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기