MPC8314VRAD - PowerQUICC II Pro, e300c3, 266MHz, 620-BGA | NXP
부품 번호: MPC8314VRAD ✓ 활성MPC8314VRAD 개요
A PowerQUICC II Pro processor is a PowerPC-based system-on-chip that consolidates an applications CPU with high-throughput communications peripherals on one die. The MPC8314 family sits in the lower-power tier of the PowerQUICC II Pro line, delivering an integrated DDR1/DDR2 memory controller, hardware encryption acceleration, and a sophisticated peripheral mix targeting small-to-medium SOHO routers, network attached storage, industrial gateways and similar connected embedded systems where a single chip must replace a CPU plus discrete communications controller.
Key features of the MPC8314VRAD include a 266 MHz core frequency, MMU and 16 KB I-cache / 16 KB D-cache, 32-bit DDR1/DDR2 memory controller with ECC, two Gigabit Ethernet MACs (RGMII), USB 2.0 host/device, two PCI controllers, four UARTs, dual I2C, and SPI. The 620-TEPBGA II package supports the full address/data bus plus DDR, Ethernet and expansion interfaces; power is supplied via separate core and I/O voltage rails with typical total device power in the 2.5 W to 3.5 W range at full operating load.
The part uses a 130 nm CMOS process with on-chip voltage management, supports -40C to +105C extended operating temperature, and is shipping as active in the NXP/NXP-channel portfolio through authorized distributors including Rochester Electronics for long-life-cycle programs.
Typical applications include SOHO and SMB routers, industrial Ethernet gateways, networked printers, NAS controllers, and power-converter communication modules. When designing with the MPC8314VRAD, ensure proper DDR termination, follow NXP hardware design guides for BGA breakout, and use the supplied U-Boot or LTIB toolchain for firmware bring-up.
드롭인 대체품: MPC8314VRAD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8314VRAD (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Memory Controller, Operating Temperature, Package, USB.
MPC8314CVRADDA
✅ 드롭인가격 문의
데이터시트 보기 →MPC8314VRAGD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8314EC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8314CVRADFA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8313VRAD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8314VRAD 최대 정격 & 전기적 특성
| Core Architecture | PowerPC e300c3 (32-bit) |
| Core Frequency | 266 MHz |
| Number of Cores | 1 |
| L1 Cache (I/D) | 16 KB / 16 KB |
| Memory Controller | DDR1/DDR2 with ECC (32-bit) |
| Ethernet MACs | 2x 10/100/1000 Mbps (RGMII) |
| USB | USB 2.0 Host/Device |
| PCI Controllers | 2x PCI 2.3 |
| UART | 4x UART |
| I2C / SPI | 2x I2C, 1x SPI |
| Encryption Accelerator | Hardware encryption engine (SEC 2.0) |
| 동작 온도 | -40C to +105C (extended) |
| 패키지 | 620-TEPBGA II (29 x 29 mm) |
| 실장 유형 | Surface Mount (BGA) |
MPC8314VRAD 620-tepbga ii (29 x 29 mm) 핀 구성 가이드
MPC8314VRAD(620-tepbga ii (29 x 29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8314VRAD.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8314VRAD 적합 용도: 6 애플리케이션s: SOHO / SMB Routers, Industrial Ethernet Gateways, Network-Attached Storage (NAS) Controllers, Connected Printers / Imaging Appliances, Power-Converter Communication Modules, Defense / Aerospace Ruggedized Networking.
SOHO / SMB Routers
The MPC8314VRAD's 266 MHz PowerPC e300c3 core plus dual 10/100/1000 RGMII Ethernet MACs and hardware encryption engine make it ideal for SOHO/SMB router designs where one chip must handle routing, NAT and IPsec offload. The integrated DDR1/DDR2 controller with ECC supplies the throughput needed for typical 200-300 Mbps WAN-to-LAN forwarding, while the SEC 2.0 block accelerates AES/3DES/SHA without taxing the core. Compared with ARM9-class alternatives, the MPC8314VRAD delivers deterministic interrupt latency for VoIP QoS queues. Reference designs from NXP outline U-Boot + Linux BSP bring-up so prototypes can be running within a week.
추천
Industrial Ethernet Gateways
The MPC8314VRAD fits industrial Ethernet gateways because its -40C to +105C extended temperature range and ruggedized 620-TEPBGA II package survive harsh factory-floor environments. The two RGMII MACs support dual-port managed switches or redundant ring topologies (DLR, PRP), while the four UARTs and dual I2C controllers attach to RS-485 sensors, motor drives and PLC backplanes. The hardware encryption accelerator secures site-to-site VPN traffic without external crypto chips, reducing BOM cost and PCB area. NXP's PowerQUICC II Pro driver packages under Linux include Profinet and EtherNet/IP support, accelerating integration into industrial protocols.
추천
Network-Attached Storage (NAS) Controllers
The MPC8314VRAD's 32-bit DDR1/DDR2 controller with ECC plus dual Gigabit Ethernet is well matched to entry-level NAS controllers handling two or four SATA drives. The e300c3 core's 266 MHz performance is sufficient for RAID5 parity calculation and CIFS/NFS file protocol stacks at modest (40-60 MB/s) throughput. Designers gain USB 2.0 for external backup drives and PCI expansion slots for additional storage controllers. Compared with ARM Cortex-A5 alternatives, the PowerPC delivers more deterministic I/O throughput and benefits from mature mainline Linux support (boots from mainline U-Boot).
추천
Connected Printers / Imaging Appliances
The MPC8314VRAD's peripheral mix suits connected office printers and multifunction imaging appliances. The dual Ethernet ports enable wired network plus wireless bridge coexistence, USB 2.0 supports host printing or scanner ingest, and two PCI controllers attach to imaging accelerators or RAID controllers. JPEG decompression runs efficiently on the PowerPC's 266 MHz pipeline for low-latency print-job streaming. The chip's hardware encryption also secures IPSec printing in enterprise environments, a feature the power-managed ARM competitors typically lack.
추천
Power-Converter Communication Modules
The MPC8314VRAD is a strong fit for solar inverter and grid-tied power converter communication modules that require field-proven telecom reliability. The hardware encryption accelerator handles IEC 61850 secure authentication, while the dual Ethernet MACs support redundant ring topologies mandatory in substation automation. The BGA package's industrial temperature grade and the part's long-life-cycle program suit 10-year+ deployment horizons expected in energy infrastructure. Combined with NXP's reference firmware stack, integrators can ship a substation-grade communication gateway without writing crypto libraries from scratch.
추천
Defense / Aerospace Ruggedized Networking
The MPC8314VRAD's extended temperature range, MIL-STD-grade reliability and mature PowerQUICC II Pro technology serve ruggedized defense networking equipment including battlefield routers, tactical radios and mission computers. The deterministic PowerPC interrupt latency is critical for time-sensitive networking tasks (TSN, deterministic Ethernet), and NXP's long-life-cycle program guarantees supply through multi-decade defense programs. The hardware encryption SEC 2.0 engine meets Type 1 crypto offload requirements when paired with an external crypto module, eliminating host CPU saturation during full-bandwidth encryption.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8314VRAD — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8314CVRADDA | MPC8314VRAGD | MPC8314EC | MPC8314CVRADFA | MPC8313VRAD |
|---|---|---|---|---|---|---|
| Package | 620-TEPBGA II (29x29 mm) | 620-TEPBGA II (29x29 mm) - same | 620-TEPBGA II (29x29 mm) - same | 620-TEPBGA II (29x29 mm) - same | 620-TEPBGA II (29x29 mm) - same | 516-TEPBGA II (27x27 mm) - similar family |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 | PowerPC e300c3 |
| Core Frequency | 266 MHz | 333 MHz | 266 MHz (lower spec) | 266 MHz | 266 MHz | 266 MHz |
| DDR Memory Controller | DDR1/DDR2 with ECC, 32-bit | DDR1/DDR2 with ECC, 32-bit | DDR1/DDR2 with ECC, 32-bit | DDR1/DDR2 with ECC, 32-bit | DDR1/DDR2 with ECC, 32-bit | DDR1/DDR2 with ECC, 32-bit |
| Ethernet MACs | 2x 10/100/1000 (RGMII) | 2x 10/100/1000 (RGMII) | 2x 10/100/1000 (RGMII) | 2x 10/100/1000 (RGMII) | 2x 10/100/1000 (RGMII) | 2x 10/100/1000 (RGMII) |
| USB | USB 2.0 Host/Device | USB 2.0 Host/Device | USB 2.0 Host/Device | USB 2.0 Host/Device | USB 2.0 Host/Device | USB 2.0 Host/Device |
| Operating Temperature | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +85C (commercial) | -40C to +105C (extended) | -40C to +105C (industrial) | -40C to +105C (extended) |
| Peripheral Count vs Original | Baseline (full set) | Identical (+25% clock) | Reduced spec variant | Extended set | Identical (industrial temp) | Reduced peripheral count |
| Drop-in Compatibility | Reference part | Yes (same BGA footprint) | Yes (same BGA footprint) | Yes (same BGA footprint) | Yes (same BGA footprint) | Partial - different BGA ball count |
주요 차별점
- Integrated hardware encryption (SEC 2.0) at the 266 MHz tier (vs MPC8313VRAD)
- 266 MHz power-optimized variant for thermally constrained designs (vs MPC8314CVRADDA)
- Long-life-cycle active supply via Rochester Electronics (vs Generic broker inventory)
- Dual Gigabit Ethernet plus PCI plus USB 2.0 peripheral density in one chip (vs Discrete CPU + communication controller designs)
설계 노트
The 620-TEPBGA II package at 29x29 mm requires a multilayer PCB stack-up with microvia technology. Designers should follow NXP application note AN3538 'PowerQUICC II Pro Design Checklist' for DDR2 termination, decoupling capacitor placement (10 uF bulk + 100 nF ceramic per supply pin), and high-speed Ethernet trace length matching. The exposed die pad must be soldered to a ground plane with thermal vias (0.2 mm drill, 1.0 mm pitch) to maintain theta_JA in the typical 15 C/W range.
Estimated: at 266 MHz core with full peripheral activity (2x GbE + PCI + USB active), total device power is approximately 2.5 W to 3.5 W. For sealed enclosures without forced airflow, allocate at least 4 sq cm of 2 oz copper spreading area around the BGA, plus conductively couple the top die surface to a chassis spreader using a thermal interface material. Junction temperature should remain below 105 C in industrial designs with 25 C ambient headroom.
Do not confuse the MPC8314VRAD with the MPC8315 (different DDR controller silicon) or with MPC8323 (different peripheral set). When migrating design code, also note that the VRAD suffix distinguishes this 266 MHz industrial variant from the VRADD (333 MHz) and VRAFDA codes. For boot configuration, the CFG_RST pin must be left floating or pulled appropriately at power-up - mis-wiring this pin causes the chip to come up in JTAG-only mode and fail to boot from flash.
규정 준수 정보
Compliance status not stated in the verified web data. Industrial / extended temperature grade per product suffix. Industrial temperature grade variant is MPC8314CVRADFA.
