MPC8536ECVTATHA - 1.25GHz PowerQUICC III MPU, 783-FCPBGA | NXP
부품 번호: MPC8536ECVTATHA ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $215 | $215.00 |
| 10 | $198 | $1,980.00 |
| 100 | $175.5 | $17,550.00 |
| 500 | $152 | $76,000.00 |
| 1,000 | $138 | $138,000.00 |
MPC8536ECVTATHA 개요
A microprocessor (MPU) is a single-chip CPU that fetches, decodes, and executes instructions while integrating memory and peripheral controllers on-die. The PowerQUICC family (PowerPC -> Power Architecture -> embedded communications processor) targets networking, storage, and industrial control, occupying the broader hierarchy of microprocessors -> microcontrollers -> embedded processors -> SoCs.
Key features include 36-bit physical addressing, hardware-accelerated cryptography via SEC/SEC 3.x engines, multi-PHY serial interfaces, and an integrated interrupt controller. The device supports simultaneous multi-protocol packet processing through dedicated QUICC Engine technology blocks and SERDES-based connectivity for PCI Express and SATA. Industrial temperature grade -40C to +105C and lead-free assembly make the MPC8536E suited for extended-lifecycle embedded designs.
Typical applications include IP network routers, secure storage controllers, line cards for multi-service switches, and industrial automation gateways. The integrated GbE MACs, SERDES lanes, and security accelerators reduce BOM cost and PCB area compared with discrete CPU-plus-coprocessor architectures of the prior generation.
When designing with the MPC8536ECVTATHA, ensure adequate PCB stackup design for 1 mm-pitch BGA fanout, four or more layers with continuous GND reference planes for SERDES impedance control, and provision for DDR3 write leveling/calibration. The SEC engine effectively needs proper clocking and JTAG topology for secure-mode bring-up.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster starting point for MPC8536E-based designs.
드롭인 대체품: MPC8536ECVTATHA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8536ECVTATHA (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Core Frequency, Memory Controller, Mounting Type, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8536EBVTATHA
✅ 드롭인✓ 재고 있음
$99.4 / 개
데이터시트 보기 →MPC8536EBCVTATHA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8536ECVJAQLA
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8536ECVTATHA 최대 정격 & 전기적 특성
| Core Architecture | Power Architecture e500 |
| 데이터 버스 폭 | 32-Bit |
| Maximum Core Frequency | 1.5 GHz (e500 scales to 1.5 GHz; this variant operates up to 1.25 GHz) |
| Operating Frequency (this variant) | 1.25 GHz |
| 공급 전압 | 1.1 V |
| Instruction Set | Power Architecture, 36-bit physical addressing |
| Number of Cores | 1 |
| Memory Controller | DDR2/DDR3 |
| Ethernet | Gigabit Ethernet (GbE) |
| Storage Interfaces | SATA, SDHC |
| Expansion Interfaces | PCI, PCI Express (PCIe) |
| Security Accelerator | SEC engine |
| Package Type | FCPBGA-783, 29 x 29 mm, 1 mm pitch, 2.80 mm height |
| 핀 수 | 783 |
| 실장 유형 | Surface Mount (BGA) |
| Lead-Free | Yes (lead-free FCBGA) |
| 동작 온도 | -40C to +105C (industrial) |
MPC8536ECVTATHA fcpbga-783, 29 x 29 mm, 1 mm pitch, 2.80 mm height 핀 구성 가이드
MPC8536ECVTATHA(fcpbga-783, 29 x 29 mm, 1 mm pitch, 2.80 mm height 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8536ECVTATHA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8536ECVTATHA 적합 용도: 6 애플리케이션s: IP Network Router Control Plane, Secure Storage Controller (NAS / iSCSI), Industrial Automation Gateway, Line Card Processor for Multi-Service Switches, Secure VPN Appliance, Military and Aerospace Embedded Controller.
IP Network Router Control Plane
The MPC8536ECVTATHA's e500 core at 1.25 GHz plus dual GbE MACs and SEC-accelerated IPsec make it ideal for IP router control-plane processing. Routing-table lookups, BGP/OSPF protocol stacks, and encryption throughput scale with the 1.25 GHz core; DDR3 with ECC handles large route tables without off-chip memory pressure. Compared with discrete CPU-plus-crypto-assist designs, the integrated SEC engine reduces bill-of-materials cost by approximately 30-40% and saves two PCB layers. Place the device adjacent to its DDR3 SO-DIMM or discrete DRAM with matched-impedance traces.
추천
Secure Storage Controller (NAS / iSCSI)
The integrated SATA host and SEC crypto engine position the MPC8536ECVTATHA for secure NAS and iSCSI storage controllers. The 1.25 GHz core handles filesystem metadata and RAID parity; DDR3 bandwidth sustains multi-drive sequential throughput up to several hundred MB/s; AES-256/XTS acceleration through SEC secures at-rest data with negligible CPU overhead. Pin-compatible with the lower-frequency MPC8536ECVJAQLA for cost-reduced SKUs.
추천
Industrial Automation Gateway
The -40C to +105C industrial temperature range plus GbE, PCIe, and USB make the MPC8536ECVTATHA suited for industrial protocol gateways bridging EtherNet/IP, PROFINET, or Modbus TCP. The e500 core runs real-time Linux or VxWorks; SEC enables authenticated firmware updates; the 783-FCPBGA provides robust mechanical and thermal performance for factory-floor vibration and thermal cycling. Note: requires 1 mm-pitch BGA layout with at least 6 PCB layers for SERDES signal integrity.
추천
Line Card Processor for Multi-Service Switches
Carrier-grade line cards combine the MPC8536ECVTATHA's GbE and SERDES connectivity with external PHY transceivers to aggregate multiple 1G links. The QUICC Engine handles packet classification and QoS; SEC secures per-subscriber IPsec tunnels; DDR3 with ECC provides buffering for traffic shaping. Compared with ASIC-based line cards, the MPU approach reduces NRE cost for low-volume deployments by enabling software-based feature updates.
추천
Secure VPN Appliance
IPsec VPN gateways benefit from the MPC8536ECVTATHA's SEC-accelerated AES, 3DES, SHA, and public-key operations. At 1.25 GHz the e500 core handles tunnel setup and IKE negotiation; SEC offloads bulk encryption at near-gigabit line rate. The integrated dual GbE provides WAN/LAN separation without an external switch. Industrial temperature grade supports outdoor cabinet deployments.
추천
Military and Aerospace Embedded Controller
The extended temperature range, lead-free assembly, and Power Architecture reliability make the MPC8536ECVTATHA suitable for military/aerospace embedded controllers in avionics, unmanned vehicles, and secure communications. The Power Architecture instruction set supports legacy software reuse from prior PowerQUICC designs; SEC enables encrypted data-at-rest storage for sensitive payloads. Requires ruggedized PCB stackup and conformal coating for deployment environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8536ECVTATHA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8536EBVTATHA | MPC8536EBCVTATHA | MPC8536ECVJAQLA |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | FCPBGA-783 (29x29) | FCPBGA-783 (29x29) - same | FCPBGA-783 (29x29) - same | FCPBGA-783 (29x29) - same |
| Core Frequency | 1.25 GHz | 1.25 GHz | 1.25 GHz | 1.0 GHz |
| Core Architecture | Power Architecture e500 | Power Architecture e500 | Power Architecture e500 | Power Architecture e500 |
| Memory Controller | DDR2/DDR3 | DDR2/DDR3 | DDR2/DDR3 | DDR2/DDR3 |
| Security Engine | SEC (full features) | SEC (full features) | SEC (subset) | SEC (full features) |
| Pin Count | 783 | 783 | 783 | 783 |
주요 차별점
- Industrial temperature grade within the same PowerQUICC III family (vs MPC8536EBVTATHA)
- Higher operating frequency than the lower-cost sibling (vs MPC8536ECVJAQLA)
- Full SEC security engine feature set (vs MPC8536EBCVTATHA)
설계 노트
The 783-ball FCPBGA at 1 mm pitch requires a PCB stackup of at least 6 layers with microvia or via-in-pad technology for fanout. Place continuous GND reference planes beneath the BGA and SERDES lanes to maintain 85-ohm differential impedance. Use NXP reference design stackup guidance to avoid signal-integrity failures.
Estimated: at maximum core activity (1.25 GHz, all engines active), the device dissipates approximately 8-12 W. The FCPBGA-783 package requires thermal vias beneath the die and a heat spreader or heatsink for sustained operation. Derate above +85C ambient for industrial deployments; verify junction temperature with on-die thermal diode.
Do not assume 0 ohm resistors between JTAG TDI/TDO for daisy-chain configurations; the MPC8536E requires dedicated JTAG topology per NXP AN4321. SEC engine requires proper clock initialization before security operations are valid. DDR3 write-leveling calibration must complete before any DRAM access to prevent memory corruption.
규정 준수 정보
Verified web data confirms lead-free FCBGA assembly per chipdig.com listing. RoHS/REACH explicit compliance statements were not found in retrieved data and are listed as 'unknown'. AEC-Q100 is not applicable as this is an MPU rather than an automotive-qualified IC.
