최종 구매 공지: MPC8548EVJAVHD557 단종에 가까워지고 있습니다. 최종 주문일: 문의하기. 사용 가능한 대체 부품 보기 →
NXP Semiconductors의 MPC8548EVJAVHD557 - PowerQUICC III 1.5GHz MPU | NXP | Industrial MPC8548EVJAVHD557 - 전자 부품
NXP Semiconductors

MPC8548EVJAVHD557 - PowerQUICC III 1.5GHz MPU | NXP | Industrial

부품 번호: MPC8548EVJAVHD557 ⚠ 최종 구매
783-FCBGA (29x29 mm) Package 1.5 GHz Speed Integrated DDR SDRAM Memory
견적 요청
MOQ: 1 |
데이터시트 보기 (PDF) 대체품 보기

MPC8548EVJAVHD557 개요

The NXP Semiconductors MPC8548EVJAVHD557 is a PowerPC e500 microprocessor in the PowerQUICC III family, integrating one core operating at 1.5 GHz in a 783-ball FC-PBGA (29x29 mm) package. It targets embedded networking, storage, and industrial control systems that demand gigahertz-class compute and rich peripheral integration on a single SoC.

A PowerQUICC III MPU is a high-performance system-on-chip (SoC) processor built on the Power Architecture technology, used as the central compute and I/O controller in routers, switches, RAID adapters, and industrial automation controllers. It sits at the top of the embedded processing hierarchy: MPU -> SoC -> embedded processor -> networking/processor SoC. The PowerQUICC III line scales from 800 MHz to 1.5 GHz and pairs the e500 core with a high-bandwidth system bus plus hardware-accelerated networking and security engines.

Key features of the MPC8548EVJAVHD557 include a 32-bit PowerPC e500 core running at 1.5 GHz, integrated DDR memory controller, multiple Gigabit Ethernet controllers, PCI Express interfaces, and hardware cryptography acceleration. The device also integrates dual I2C, DUART, enhanced local bus controller, and GPIO. The 783-ball FC-PBGA package exposes the full peripheral set and is rated for industrial temperature operation.

Architecturally, the MPC8548E variants pair the superscalar e500 core with separate engines for pattern matching, security (SEC 3.x), and table lookup, allowing line-rate packet processing without burdening the core. The 1.5 GHz speed grade (suffix 1500 in the package code) is the top bin of this family, and the 557 ordering code denotes a specific temperature grade and packing option.

Typical applications include enterprise routers and switches, network attached storage (NAS) controllers, RAID host adapters, industrial automation controllers, and telecom base-station equipment. The combination of gigahertz compute with hardware networking makes it well-suited to control-plane plus data-plane workloads on a single chip.

When designing with this device, allocate adequate PCB layers for the FC-PBGA escape and place decoupling close to the voltage-rail balls. The 1.5 GHz operation requires clean core power and a thermal solution adequate for the application environment.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

드롭인 대체품: MPC8548EVJAVHD557 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

MPC8548EVJAVHD

✅ 드롭인
📦 783-FCPBGA (29x29)
same silicon, no 557 suffix (standard temperature/grade), 1.5 GHz, 783-FCBGA identical footprint

📋 참조 대체품 (카탈로그에 없음)

MPC8548EVJAULD

✅ 드롭인
📦 783-FCPBGA (29x29)
same 783-FCBGA package and e500 core; different speed grade; pin-compatible for most board layouts

📋 참조 대체품 (카탈로그에 없음)

MPC8548ECVJAQND

✅ 드롭인 ⚠️ 사양 미검증
📦 783-FCPBGA (29x29)
same 783-FCBGA pinout, e500 core; extended temperature grade variant

📋 참조 대체품 (카탈로그에 없음)

MPC8548EVJAVHD557 최대 정격 & 전기적 특성

Core Architecture PowerPC e500
Core Count 1
데이터 버스 폭 32-bit
최대 클록 주파수 1.5 GHz
Series PowerQUICC III (MPC85xx)
패키지 783-FCBGA (29x29 mm)
실장 유형 Surface Mount
Memory Controller Integrated DDR SDRAM
Ethernet Multiple Gigabit Ethernet controllers
PCI Express Integrated PCI Express interfaces
Security Engine Integrated SEC (crypto acceleration) on MPC8548E
Local Bus Enhanced local bus controller (eLBC)
Serial Interfaces 2x I2C, DUART
RoHS 상태 Lead-free (per manufacturer page)

MPC8548EVJAVHD557 783-fcbga (29x29 mm) 핀 구성 가이드

MPC8548EVJAVHD557(783-fcbga (29x29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MPC8548EVJAVHD557의 783-fcbga (29x29 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MPC8548EVJAVHD557.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MPC8548EVJAVHD557 적합 용도: 6 애플리케이션s: Enterprise Routers and Switches, Network Attached Storage Controllers, RAID Host Adapters, Industrial Automation Controllers, Telecom Base Station Controllers, Printers and Imaging Controllers.

🌐

Enterprise Routers and Switches

The MPC8548EVJAVHD557's 1.5 GHz PowerPC e500 core plus integrated Gigabit Ethernet controllers and PCI Express lanes suit control-plane and data-plane workloads on routers and L2/L3 switches. The hardware classification engines (pattern match and table lookup) accelerate ACL lookups and QoS scheduling at line rate, offloading the core from per-packet work. Place the MPU as the main control CPU with external PHY MARVELL or Vitesse transceivers on the SGMII pins; the integrated SEC engine accelerates IPsec and SSL sessions for VPN gateways. Recommended companions: external DDR2/DDR3 SDRAM (e.g., MT47H128M16), flash boot device, and a clock generator such as ICS932SQ420 for the platform reference.

추천

MPC8548EVJAVHD (Same silicon, standard grade substitute) MT47H128M16 (DDR SDRAM companion memory)
🖥️

Network Attached Storage Controllers

In NAS and storage controller designs the MPC8548EVJAVHD557 acts as the central SoC: e500 core runs the file-system stack, SATA/RAID engines handled by companion bridge chips, and a 1 GbE or 10 GbE uplinks connect to clients. The integrated enhanced local bus connects legacy NAND flash boot devices and external peripherals. Drop-in upgrade from older PowerQUICC II designs is feasible on boards already laid out for the 783-FCPBGA. Recommended companions: SATA controller (e.g., Silicon Image SiI3132), DDR memory, and SPI NOR flash for U-Boot.

추천

MPC8548EVJAVHD (Same silicon drop-in substitute)
🖥️

RAID Host Adapters

The MPC8548EVJAVHD557's combination of high-throughput DDR controller, PCI Express endpoints, and hardware XOR/RAID assist engines makes it a strong RAID controller SoC. The 1.5 GHz compute budget handles stripe rebuilds and parity computations while the integrated Ethernet ports deliver iSCSI offload. Reference designs from NXP/Artesyn pair this MPU with multiple PMC-Sierra or LSI SATA/SAS controllers over PCIe. Recommended companions: PCIe SATA/SAS controller, DDR2 ECC memory module, and ECC flash for boot.

추천

MPC8548EVJAVHD (Standard same-silicon substitute)
🏭

Industrial Automation Controllers

Industrial PC and PLC controllers benefit from the MPC8548EVJAVHD557's gigahertz compute plus its rich set of dedicated serial ports (DUART, I2C) for industrial field-bus bridging to Modbus, Profibus or EtherCAT networks via companion ASICs. The industrial temperature grade variants of this family operate reliably in 0C to 70C or wider ambient ranges. Drop-in upgrades allow system integrators to keep the same 783-FCPBGA layout across product refreshes. Recommended companions: industrial PHY (e.g., DP83867IR), isolated RS-485 transceiver, and a robust watchdog timer.

추천

MPC8548EVJAVHD (Same silicon drop-in substitute for industrial builds)
✈️

Telecom Base Station Controllers

Base-station controllers in 3G/4G small-cell and BTS equipment use the MPC8548EVJAVHD557 to handle Layer 2/3 control-plane plus timing-sensitive packet processing. The gigahertz compute budget supports real-time protocol stacks while the SEC engine accelerates encryption. The 783-FCPBGA pinout is reused by NXP across PowerQUICC III and early QorIQ devices, easing long-term platform refresh. Recommended companions: radio transceiver front end, timing source (IEEE 1588), and DDR memory with ECC.

추천

MPC8548EVJAULD (Same 783-FCBGA pinout, lower speed grade option)
🧩

Printers and Imaging Controllers

High-speed networked multifunction printers use the MPC8548EVJAVHD557 as the main controller: GigE for network connectivity, DDR for image-buffer memory, USB and PCI Express to ASIC engines for rasterization and scanning. The e500 core runs the embedded Linux or VxWorks image-processor firmware, and the integrated peripherals eliminate external bridge ICs. Recommended companions: DDR memory, SPI NOR boot flash, and image-processing ASIC.

추천

MPC8548EVJAVHD (Same silicon standard-grade alternative)

추천 제품 요약

MPC8548EVJAVHD Same silicon, standard grade substitute 사용처: Enterprise Routers and Switches, Network Attached Storage Controllers, RAID Host Adapters, Industrial Automation Controllers, Printers and Imaging Controllers MT47H128M16 DDR SDRAM companion memory 사용처: Enterprise Routers and Switches MPC8548EVJAULD Same 783-FCBGA pinout, lower speed grade option 사용처: Telecom Base Station Controllers
What is the MPC8548EVJAVHD557?
The MPC8548EVJAVHD557 is a NXP PowerQUICC III MPU integrating one PowerPC e500 core at up to 1.5 GHz in a 783-ball FC-PBGA (29x29 mm) package. It combines the e500 core with DDR controller, Gigabit Ethernet, PCI Express, and hardware security engines for embedded networking and storage. According to NXP product pages the part is part of the MPC8548E silicon family.
What is the maximum clock frequency of MPC8548EVJAVHD557?
The MPC8548EVJAVHD557 operates at up to 1.5 GHz core clock, which is the top speed grade of the MPC8548E family. Earlier revisions of the same silicon bin at lower frequencies; the suffix 1500 in the part marking indicates the 1.5 GHz speed grade. Peripheral clocks are independently programmable and tied to the platform reference clock.
What package does MPC8548EVJAVHD557 use?
The MPC8548EVJAVHD557 ships in a 783-ball flip-chip plastic BGA at 29x29 mm body size with a 1 mm ball pitch. The large BGA exposes the full peripheral set including DDR memory bus, multiple Gigabit Ethernet SGMII pins, PCI Express lanes, and the enhanced local bus. A substrate of at least eight layers is recommended for escape routing.
Is MPC8548EVJAVHD557 still in production?
According to the NXP product page, the base MPC8548EVJAVHD is flagged with End of Life Overview and Product Discontinuance information. The MPC8548EVJAVHD557 suffix is a specific operating-condition variant; consult NXP product change notices for last-time-buy and replacement guidance. Authorized stocking distributors may still hold inventory for the 557 variant.
What is the difference between MPC8548E and MPC8547E?
Both are PowerQUICC III MPUs with the e500 core and a similar peripheral set, but the MPC8548E integrates pattern-matching and table-lookup engines plus security (SEC 3.x) for accelerated packet classification. The MPC8547E omits the security engine and targets lower-cost designs. Pinout differs between the two - they are not drop-in replacements on the same PCB footprint.
Where to buy MPC8548EVJAVHD557 online?
The MPC8548EVJAVHD557 is available through authorized distributors including Rochester Electronics and components-house.com, plus secondary-market brokers such as Ampheo and Jotrin Electronics. Pricing seen at LCSC was $1016.03 for unit quantity as of 2026-10-17. Independent distributors may have stock but verify traceability before sourcing EOL silicon.
What is the lead time for MPC8548EVJAVHD557?
Lead time depends on stock at the chosen distributor. Authorized distributors (Rochester Electronics) typically ship from inventory within 1-4 weeks for in-stock parts. Where the part is in last-time-buy phase, forward orders may extend to 6-12 weeks. Contact NXP sales or authorized distributors for firm quotes because lead times vary by lot and date code.
What is a drop-in replacement for MPC8548EVJAVHD557?
Direct drop-in pin-compatible replacements are scarce because the 783-BGA pinout is unique to this MPU family. Best practice is to check NXP's official cross-reference page for any newer PowerQUICC III or QorIQ P-series part sharing the same 783-BGA pinout. The MPC8548EVJAVHD (no 557 suffix) is the closest same-silicon variant and can substitute on most boards subject to operating-condition review.
Is there an NXP equivalent for MPC8548EVJAVHD557?
Within NXP's portfolio, the MPC8548EVJAVHD (without the 557 suffix) is the standard same-silicon variant and typically shares the same 783-BGA footprint. Other members of the PowerQUICC III family use different BGA pinouts and are not drop-in substitutes. For new designs NXP recommends migrating to QorIQ P-series processors, though those differ in package and pinout.
MPC8548EVJAVHD557 vs MPC8548EVJAVHD - which is better?
The two parts share the same 1.5 GHz e500 core, same 783-FCPBGA (29x29 mm) package, and same peripheral set; the 557 suffix denotes a specific temperature grade or packing option. For most designs the non-557 variant is interchangeable when the operating conditions match. Always cross-check the device marking and datasheet orderable part number table before substituting.
What is the operating temperature range of MPC8548EVJAVHD557?
The operating temperature range for the MPC8548EVJAVHD557 ordering code is not explicit in the verified web data and is flagged [DATA_NEEDED]. The wider MPC8548E family includes both commercial (0C to +85C ambient) and extended (typically -40C to +105C) temperature grades; the 557 suffix corresponds to one specific grade - check NXP's orderable part table for the exact value.
What are the key specifications of MPC8548EVJAVHD557 that engineers should know?
Engineers should know four primary specs: (1) the e500 core runs at up to 1.5 GHz; (2) the package is 783-FCPBGA at 29x29 mm with a 1 mm pitch; (3) the silicon integrates DDR memory controller plus Gigabit Ethernet, PCI Express, SEC security, and enhanced local bus; (4) lifecycle is last-time-buy on the base part with the 557 suffix shipped through authorized distributors. Build the PCB escape and thermal solution around these four constraints.
Where to download MPC8548EVJAVHD557 datasheet PDF?
The official product brief and reference manual are available from NXP's product page at https://www.nxp.com/part/MPC8548EVJAVHD. The full datasheet PDF can also be retrieved from distributor pages such as Mouser and DigiKey. Third-party datasheet aggregators (DigChip, Jotrin) mirror the manufacturer document for archival access.
What can replace MPC8548EVJAVHD557?
Within NXP's own portfolio, the MPC8548EVJAVHD (without the 557 suffix) is the closest same-silicon drop-in candidate if your operating temperature grade matches. For new designs the recommended upgrade path is NXP's QorIQ P-series (P1010, P2020 family), though these use different BGA pinouts and require PCB rework. Cross-brand drop-in equivalents in this exact 783-BGA pinout are not widely available.
Is MPC8548EVJAVHD557 RoHS compliant?
The base MPC8548EVJAVHD is documented as Lead-free on Mouser and DigChip. RoHS compliance for the 557 specific suffix should be verified from the NXP orderable part table because some speed-grade suffixes ship in non-RoHS or specialty variants. Always obtain the latest RoHS/REACH statement from NXP before placing a production order.

엔지니어링 참조 데이터: MPC8548EVJAVHD557 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MPC8548EVJAVHD557 when you need a NXP PowerQUICC III e500 MPU in a 783-FCPBGA (29x29) for embedded networking, storage or industrial control and the specific 557 suffix matches your environmental or packing requirement. Choose the plain MPC8548EVJAVHD as the same-silicon default if the 557 grade is not needed; it is the closest drop-in alternative. The MPC8548ECVJAQND offers an extended temperature grade and is a drop-in replacement subject to operating-range review. For new designs, evaluate NXP's QorIQ P-series - they are not drop-in, but offer better performance-per-watt.

대체품과의 비교

파라미터 이 제품 MPC8548EVJAVHD MPC8548EVJAULD MPC8548ECVJAQND
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 783-FCPBGA (29x29) 783-FCPBGA (29x29) - same 783-FCPBGA (29x29) - same 783-FCPBGA (29x29) - same
Core Architecture PowerPC e500 PowerPC e500 PowerPC e500 PowerPC e500
Core Count 1 1 1 1
Memory Controller DDR SDRAM controller DDR SDRAM controller DDR SDRAM controller DDR SDRAM controller
Embedded Security Engine Yes (SEC 3.x) Yes (SEC 3.x) Yes (SEC 3.x) Yes (SEC 3.x)

주요 차별점

  • Specific 557 ordering variant (vs MPC8548EVJAVHD)
  • Same 783-FCPBGA footprint across family (vs MPC8548ECVJAQND)
  • Hardware Security Engine (vs Non-E sibling MPC8547E)

설계 노트

The 783-FCPBGA at 1.5 GHz can dissipate 5-10 W depending on workload and IO activity, so a thermal interface material between the package and a heatsink or chassis block is required for reliable operation. Estimated: from typical MPC85xx power figures and the 29x29 mm BGA, a theta_JB around 1 C/W and theta_JA of 12-15 C/W with a 200 LFM airflow would yield a junction-to-ambient rise of roughly 60-90 C. Provide temperature monitoring via the integrated thermal diode to a companion external sensor.

Layout the 783-FCBGA escape with at least an 8-layer PCB using 1 oz copper and matched-impedance striplines for the high-speed DDR, PCIe and SGMII interfaces. Place decoupling capacitors (0.1 uF and 10 uF) within 50 mil of the core and IO power balls. Series termination on the enhanced local bus and source-synchronous DDR traces must follow the reference designators in the NXP reference manual to avoid setup/hold violations at 1.5 GHz.

The MPC8548EVJAVHD557 requires a tightly regulated multi-rail supply - typically one core rail and one or two IO rails. Use a multi-phase buck regulator per rail to deliver up to 10 A with sub-3% ripple tolerance; ripple above 50 mVpp on VDD can disrupt the e500 core at 1.5 GHz. Place power-rail bulk capacitance directly above the BGA-side vias for best transient response.

Do not hot-swap the FC-PBGA without proper precharge; always sequence power rails on or off per the datasheet. Avoid using non-Freescale-built clones of this part number - cloned BGA pinouts may be functionally similar but introduce errata or IO timing differences that only appear in production.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

Base MPC8548EVJAVHD listed as Lead-free by Mouser and DigChip. RoHS, REACH, halogen and conflict-mineral statements for the 557 suffix need confirmation from the NXP orderable part table because the verified web snippet did not explicitly include them.

데이터 검증일: 2026-10-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MPC8548EVJAVHD557 MPC8548EVJAVHD557 datasheet NXP MPC8548 PowerQUICC III PowerPC e500 1.5 GHz 783 BGA MPC8548E networking MPU MPC8548EVJAVHD557 vs MPC8548EVJAVHD MPC8548EVJAVHD557 drop-in replacement buy MPC8548EVJAVHD557 what is a PowerQUICC III processor NXP QorIQ P series upgrade 783 FCBGA 29x29 MPU MPC8548 lead time distributor

관련 부품 & 용어

NXP Semiconductors MPC8548EVJAVHD557 MPC8548EVJAVHD MPC8548EVJAULD MPC8548ECVJAQND PowerQUICC III MPC85xx PowerPC e500 Power Architecture MPU microprocessor system-on-chip FC-PBGA FC-BGA 783 FCPBGA 29x29 DDR SDRAM controller PCI Express Gigabit Ethernet SEC engine IPsec RAID controller industrial automation controller embedded networking lead-free RoHS
빠른 견적 RFQ
영업팀이 24시간 이내에 답변드립니다
부품 번호MfrPkg수량목표 가격
×
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

장바구니 0개 항목
장바구니가 비어 있습니다
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기