MPC8548PXAUJB - PowerPC e500 MPU 1.333GHz 783-FCBGA | NXP
부품 번호: MPC8548PXAUJB ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $179.21 | $179.21 |
| 10 | $165 | $1,650.00 |
| 100 | $145.5 | $14,550.00 |
| 500 | $132 | $66,000.00 |
| 1,000 | $121.75 | $121,750.00 |
MPC8548PXAUJB 개요
A microprocessor (MPU) is an integrated central processing unit that fetches, decodes, and executes instructions and serves as the primary computational engine of an embedded system. Within the broader taxonomy, the MPC8548 sits between general-purpose microcontrollers (MCU) and full application processors; it integrates a CPU core, memory controllers, and high-speed I/O on one die, bridging the gap between microcontroller simplicity and application-processor performance. The PowerQUICC III line extends this with hardware acceleration for communications protocols.
Key features include a 32-bit e500 core with dual-issue superscalar execution, integrated L1/L2 caches, a DDR2 memory controller supporting up to 1 GB of addressable memory, four Gigabit Ethernet controllers with SGMII support, multiple PCI Express interfaces, and RapidIO connectivity. The integrated QUICC Engine subsystem offloads protocol processing for WAN, ATM, and Ethernet aggregation, dramatically reducing CPU overhead in routing and switching workloads.
From an architectural standpoint, the e500 core implements the Book E instruction set with signal-processing extensions, allowing efficient execution of both control-plane and data-plane code. The 783-FCBGA package exposes all SERDES lanes and parallel I/O simultaneously, enabling flexible board topologies for line cards, control-plane modules, and embedded appliances without external glue logic.
Typical applications include multiservice routers, DSLAMs, base-station controllers, industrial automation controllers, and storage area network (SAN) gateways. In these workloads the combination of high clock rate, hardware-protocol offload, and rich connectivity makes the MPC8548 a long-serving platform choice. The wide operating-temperature range and ruggedized package options also suit industrial and mil-aero programs.
Designers should plan power-delivery carefully: the part can draw several watts under full load, so multi-layer PCB with a solid ground pour is mandatory. JTAG boundary-scan and Nexus-class debug interfaces are present for bring-up. Always consult the PowerQUICC III hardware specifications document for errata and reference board layout before finalizing the design.
드롭인 대체품: MPC8548PXAUJB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8548PXAUJB (동일 폼 팩터 및 풋프린트) — 차이점: Package, Ethernet, RoHS Status, Series, Mounting Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8548PXAUJC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548ECPXAUJC
✅ 드롭인✓ 재고 있음
$189.9 / 개
데이터시트 보기 →MPC8548EVTAUJB
✅ 드롭인✓ 재고 있음
$195 / 개
데이터시트 보기 →MPC8548ECVJAUJD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8536AVTAULA
✅ 드롭인✓ 재고 있음
$65.8 / 개
데이터시트 보기 →MPC8560CVT667JC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548PXAUJB 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC III / MPC85xx |
| Core Architecture | PowerPC e500 (32-bit) |
| Number of Cores | 1 |
| Maximum Core Frequency | 1.333 GHz |
| 패키지 | 783-FCBGA (29x29 mm) |
| 실장 유형 | Surface Mount |
| L1 Cache | 32 KB instruction + 32 KB data |
| Ethernet | 4x Gigabit Ethernet (SGMII) |
| RapidIO | Yes (serial RapidIO) |
| QUICC Engine | Yes (protocol offload subsystem) |
| RoHS 상태 | Compliant (per NXP product page) |
| Lead-Free | Yes |
MPC8548PXAUJB 783-fcbga (29x29 mm) 핀 구성 가이드
MPC8548PXAUJB(783-fcbga (29x29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8548PXAUJB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8548PXAUJB 적합 용도: 6 애플리케이션s: Multiservice Routers, DSLAM / Access Aggregation, Industrial Automation Controllers, Base Station Controllers, Storage Area Network Gateways, Single-Board Computers (SBC).
Multiservice Routers
The MPC8548PXAUJB is purpose-built for multiservice routers that aggregate multiple WAN protocols onto a single backplane. Its e500 core at 1.333 GHz plus the QUICC Engine hardware-offload subsystem handle HDLC, PPP, ATM, and Ethernet aggregation concurrently, allowing line-rate forwarding without CPU bottlenecks. The four integrated SGMII Gigabit Ethernet MACs provide direct connectivity to PHY or switch fabric, while PCI Express x4 and RapidIO ports enable high-speed expansion to additional line cards. Designers pair the processor with DDR2 memory and a small CPLD for glue logic, simplifying BOM and shortening time to market for branch-office routers.
추천
DSLAM / Access Aggregation
In DSLAM line cards and access aggregation nodes the MPC8548PXAUJB combines deterministic processing with hardware-protocol offload. Its e500 core executes routing and policy code at 1.333 GHz while the QUICC Engine handles ATM and Ethernet interworking for hundreds of subscriber lines. The DDR2 controller supplies the bandwidth needed for traffic tables and the PCI Express interface links to downstream DSL PHY chips. This is exactly the workload for which the PowerQUICC III family was designed - production designs have shipped in volume across telecom OEMs.
추천
Industrial Automation Controllers
Industrial automation platforms benefit from the MPC8548PXAUJB's deterministic response time, high-speed serial interfaces, and ruggedized package options. The e500 core's signal-processing extensions accelerate PLC scan loops and motion-control maths, while dual Gigabit Ethernet ports support ring topologies and deterministic Ethernet protocols. The extended-temperature EC variants operate reliably in factory cabinets up to 85C ambient. The processor's mature software ecosystem (Linux, VxWorks, Green Hills INTEGRITY) makes it attractive for industrial control designs requiring certified real-time behavior.
추천
Base Station Controllers
Wireless base station controllers leverage the MPC8548PXAUJB's mix of compute performance and connectivity. The 1.333 GHz e500 core runs Layer-2/Layer-3 control-plane code while dedicated SERDES lanes interface to baseband FPGA/ASIC modules over RapidIO or PCI Express. The QUICC Engine handles Abis/Iub protocol offload in 3G NodeB controllers, and the four Ethernet MACs support backhaul aggregation. Power consumption at full load is acceptable for the chassis form factor and NXP's long-life program supports telecom deployment horizons.
추천
Storage Area Network Gateways
The MPC8548PXAUJB is well suited to SAN gateway and iSCSI target applications where bridging between Fibre Channel, Ethernet, and serial-attached SCSI requires low-latency processing. Its integrated PCI Express and RapidIO interfaces provide direct attachment to storage controllers, while the e500 core runs iSCSI software stacks with predictable throughput. The QUICC Engine assists with TCP/IP offload to maximize storage I/O. DDR2 memory bandwidth is sufficient for typical gateway workloads with read/write caching.
추천
Single-Board Computers (SBC)
Embedded SBC modules use the MPC8548PXAUJB to integrate networking, compute, and I/O on a single board. Its wide peripheral set eliminates external chipsets; the e500 core supports legacy PowerPC codebases that have been deployed across military, aerospace, and medical programs for years. VxWorks and Green Hills INTEGRITY toolchains are mature, and Linux mainline kernels support the SoC. VME or CompactPCI carrier boards pair naturally with this processor for long-life defense programs.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8548PXAUJB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8548PXAUJC | MPC8548ECPXAUJC | MPC8548EVTAUJB | MPC8548ECVJAUJD |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Core Speed | 1.333 GHz | 1.0 GHz | 1.0 GHz | 1.333 GHz | 1.333 GHz |
| Temperature Grade | Commercial (0C to +85C) | Commercial | Extended (-40C to +85C) | Commercial | Extended |
| Series | PowerQUICC III | PowerQUICC III | PowerQUICC III | PowerQUICC III | PowerQUICC III |
| Ethernet MACs | 4x Gigabit (SGMII) | 4x Gigabit | 4x Gigabit | 4x Gigabit | 4x Gigabit |
| QUICC Engine | Yes | Yes | Yes | Yes (enhanced) | Yes (enhanced) |
주요 차별점
- Integrated QUICC Engine for hardware protocol offload (vs MPC8536AVTAULA)
- Higher 1.333 GHz core speed vs lower-grade family members (vs MPC8548PXAUJC (1.0 GHz))
- Mature PowerQUICC III software ecosystem (vs Newer QorIQ Layerscape (LS1xxx))
설계 노트
The MPC8548PXAUJB in the 783-FCBGA package can dissipate several watts at full 1.333 GHz load. Use a minimum 4-layer PCB with continuous ground and power planes directly under the BGA. Provide thermal vias in a 1.2 mm pitch array under the die shadow and connect them to inner copper pours for heat extraction. For enclosed chassis designs above 70C ambient, evaluate the EC temperature variant.
BGA escape routing demands microvia (laser-drilled) stack-ups. Fan-out the top layer with 0.1 mm traces and use a 0.2 mm pitch via-in-pad with copper-filled cap for SERDES ball assignments. Match impedance to 100 ohm differential for SERDES lanes (PCIe, RapidIO, SGMII). Reference NXP application note AN3949 for the recommended layout flow.
Power-up sequencing: the MPC8548 requires PORESET and HRESET to be asserted in the correct order before the DDR2 controller initializes - violating this can lock the device. Always read the latest errata sheet before prototype bring-up; several DDR2 and SERDES issues have been documented in successive silicon revisions and require software workarounds.
규정 준수 정보
RoHS and lead-free per NXP product page. Not AEC-Q100 qualified (automotive-grade variants not part of this family).