MPXD1010VLU64 - 32-Bit 64MHz 1MB Flash MCU | NXP
부품 번호: MPXD1010VLU64 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $19.1413 | $19.14 |
| 10 | $18.5 | $185.00 |
| 100 | $16.8 | $1,680.00 |
| 500 | $14.95 | $7,475.00 |
| 1,000 | $13.6 | $13,600.00 |
MPXD1010VLU64 개요
A microcontroller is a programmable system-on-chip that executes firmware, manages digital inputs and outputs, and coordinates memories, communication interfaces, timers, and other peripherals. The e200z0h core places the MPXD1010VLU64 in the 32-bit embedded-controller segment, where deterministic control and communication throughput are more important than the power profile of a low-cost 8-bit device.
The verified specifications identify 1 MB (1M x 8) program flash, 48 KB (48K x 8) RAM, a 64 MHz operating frequency, 133 I/O pins, and connectivity including CANbus, I²C, LINbus, SCI, SPI, and UART/USART. The listed peripheral set also includes DMA, LCD, power-on reset, PWM, and a watchdog timer, supporting display controllers, automotive or industrial communications, and general embedded control systems.
The package is a 176-LQFP in a 24 mm x 24 mm gull-wing format. Its large pin count exposes substantially more signal and peripheral resources than a small microcontroller package, which is useful for systems combining display interfaces, external memory, communication buses, and control signals. The exact electrical limits, memory map, pin names, and timing values should be confirmed in the manufacturer datasheet before layout or firmware release.
Typical applications include entry-level display systems, industrial control panels, communication gateways, CAN-based equipment, and embedded systems requiring multiple serial interfaces. Because lifecycle information is reported as obsolete in one verified source, engineers should verify current sourcing, supported revisions, and any approved migration path before new production designs.
A key design consideration is to match the MCU's power, clock, peripheral, and package requirements to the existing PCB. The 176-LQFP footprint has fine-pitch leads and requires careful routing, thermal planning, and assembly inspection; do not substitute a different package without a documented footprint and pinout comparison.
This page consolidates the verified distributor specifications, lifecycle warning, package details, and replacement limitations for engineers evaluating the MPXD1010VLU64. Because the available cross-reference results do not verify five genuine same-package pin-to-pin alternatives, this page does not invent drop-in replacements.
드롭인 대체품: MPXD1010VLU64 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPXD1010VLU64 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
LPC4357JBD208E
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MPXD1010VLU64 최대 정격 & 전기적 특성
| Product Type | 32-bit Microcontroller |
| Core Processor | e200z0h |
| Core Size | 32-bit |
| Operating Frequency | 64 MHz |
| Program Memory Size | 1 MB (1M x 8) |
| Program Memory Type | Flash |
| RAM Size | 48 KB (48K x 8) |
| Number of I/O | 133 |
| Connectivity | CANbus, I²C, LINbus, SCI, SPI, UART/USART |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| 패키지 | 176-LQFP |
| Package Dimensions | 24 mm x 24 mm |
| Terminal Count | 176 |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Part Status | Obsolete |
| Manufacturer | NXP Semiconductors |
MPXD1010VLU64 24 mm x 24 mm 핀 구성 가이드
MPXD1010VLU64(24 mm x 24 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPXD1010VLU64.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPXD1010VLU64 적합 용도: 6 애플리케이션s: Entry-Level Display Controller, Industrial Communication Gateway, CAN-Based Control Module, Human-Machine Interface Controller, Sensor and Actuator Network, Legacy Embedded Platform Maintenance.
Entry-Level Display Controller
The MPXD1010VLU64 is explicitly identified by the verified source as a microcontroller for entry-level display solutions. Its 64 MHz e200z0h core can execute display-control firmware while the listed LCD peripheral, DMA, PWM, and serial interfaces support local user-interface and communication functions. The 1 MB flash provides room for graphics, control, and communication software, while 48 KB RAM can support buffering and protocol state. Designers should verify LCD timing, memory mapping, pin multiplexing, and electrical limits in the datasheet before layout.
추천
Industrial Communication Gateway
The listed CANbus, LINbus, SCI, SPI, UART/USART, and I²C connectivity makes the MPXD1010VLU64 appropriate for a communication gateway that bridges several embedded serial domains. Its 64 MHz core can manage protocol tasks, while the 176-LQFP package exposes 133 I/O pins for status, control, and peripheral connections. The design must still check protocol electrical levels, transceiver requirements, pin multiplexing, bus timing, and any isolation requirements before production.
추천
CAN-Based Control Module
The MPXD1010VLU64's listed CANbus interface and industrial temperature grade make it a candidate for CAN-based industrial control equipment. The controller can combine network management with PWM outputs, watchdog supervision, and general-purpose digital I/O in one 176-LQFP device. Engineers should verify CAN operating-mode details, transceiver selection, termination, clock configuration, and fault behavior in the manufacturer documentation; the supplied snippets do not provide those electrical or timing values.
추천
Human-Machine Interface Controller
The LCD interface, PWM capability, 133 I/O pins, and multiple serial interfaces support a compact human-machine interface that combines a display, buttons, indicators, and external communications. At 64 MHz, the MCU can coordinate display updates and input handling while UART/USART or SPI connects to a host, keypad, or sensor interface. Firmware planning should account for pin multiplexing, peripheral conflicts, display timing, and the fact that the obsolete lifecycle status requires supply-chain confirmation.
추천
Sensor and Actuator Network
The I²C, SPI, UART/USART, SCI, PWM, and GPIO resources make the MPXD1010VLU64 suitable for centralized sensor acquisition and actuator control. It can connect local sensors, coordinate PWM-driven outputs, and use watchdog supervision while retaining substantial flash and RAM for protocol and application firmware. Actual implementation depends on pin assignment, I/O voltage levels, peripheral timing, power requirements, and communication standards that are not fully detailed in the supplied snippets.
추천
Legacy Embedded Platform Maintenance
Because the verified source reports MPXD1010VLU64 as obsolete, the part remains relevant to maintenance and continuation of installed industrial or display equipment. Its known 1 MB flash, 48 KB RAM, 64 MHz core, and 176-LQFP footprint allow engineers to identify compatible boards, reproduce firmware behavior, and plan controlled substitutions. A replacement must be validated against the original schematic, pinout, memory map, peripherals, clocking, software, and lifecycle requirements rather than selected by package number alone.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPXD1010VLU64 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LPC4357JBD208E |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
주요 차별점
- e200z0h 32-bit core with 64 MHz operation (vs LPC4357JBD208E)
- 1 MB flash and 48 KB RAM (vs LPC4357JBD208E)
- 176-LQFP with 133 I/O (vs LPC4357JBD208E)
- Integrated display and vehicle-network peripherals (vs LPC4357JBD208E)
설계 노트
Use the current NXP 176-LQFP land pattern and package drawing as the authoritative PCB footprint. The verified source confirms a 24 mm x 24 mm gull-wing package but does not provide pad dimensions, so do not infer geometry from the package name. Check pin numbering, exposed thermal requirements if any, assembly clearance, and courtyard against the official mechanical drawing before releasing artwork.
The supplied data does not specify supply voltage, current, or power dissipation. Before connecting the MCU, determine the supported voltage range and all I/O domains from the manufacturer datasheet. Separate core, digital I/O, and any external interface supplies according to the verified power architecture, and do not infer a replacement power tree from the processor frequency or memory size.
The 176-LQFP device exposes 133 I/O pins and supports multiple communication interfaces. Plan pin multiplexing early so CANbus, LINbus, SPI, UART/USART, I²C, PWM, LCD, and debug functions do not conflict. Route high-speed or noise-sensitive interfaces away from switching nodes, preserve ground-return continuity, and validate every assigned signal against the datasheet pin table.
Do not treat obsolete status as proof that the existing part is unavailable, or distributor inventory as proof of long-term supply. Obtain manufacturer-approved lifecycle information, request date-code and traceability details, and validate any replacement for boot behavior, memory map, peripheral multiplexing, interrupt vectors, and software compatibility. A same-package candidate without complete pin and electrical validation is not a drop-in replacement.
Operating frequency and core type alone do not determine junction temperature or allowable board dissipation. Calculate thermal performance from the verified supply voltage, operating current, ambient temperature, package thermal resistance, PCB copper, and airflow. Those inputs are absent from the supplied data, so perform the calculation only after retrieving the manufacturer electrical and thermal specifications.
규정 준수 정보
The supplied verified snippets identify an industrial temperature grade and obsolete part status but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.
