MVF62NN151CMK40 - Vybrid VF6xx Dual-Core MPU, ARM A5+M4 | NXP
부품 번호: MVF62NN151CMK40 ✓ 활성MVF62NN151CMK40 개요
What is a heterogeneous dual-core MPU? A heterogeneous multiprocessor unit (MPU) is a system-on-chip that combines two architecturally different processor cores on the same silicon. The high-performance Cortex-A5 typically runs a rich operating system (Linux, MQX, or similar) while the Cortex-M4 handles real-time deterministic tasks such as motor control or sensor polling. This topology replaces traditional ASIC+MCU designs, reducing board area, BOM, and inter-IC communication latency. Vybrid sits in the MPU -> application processor -> embedded SoC taxonomy, bridging the gap between microcontrollers (single-core deterministic) and full application processors (high-MHz Linux-class).
Key features include dual-core asymmetric processing (A5 + M4), dual USB 2.0 OTG controllers with integrated PHY, dual 10/100 Ethernet controllers with L2 switch acceleration, a 1.5 MB on-chip SRAM block, and a wide range of connectivity peripherals (UART, SPI, I2C, CAN, I2S). The device is offered in a 364-ball MAPBGA (17x17) for high-density industrial designs, with operating temperature and AEC-Q100 grade specific to the variant ordering code.
The A5 core includes an NEON media engine and a single-precision FPU, while the M4 core adds a similar FPU plus DSP extensions. The platform supports up to 1.5 MB of on-chip SRAM, configurable L2 cache, and DDR2/DDR3 external memory controllers. Multiple on-chip timer blocks, watchdog timers, and a rich interrupt controller (NVIC) serve deterministic real-time tasks delegated to the M4.
Typical applications include industrial HMI panels, building automation gateways, factory automation controllers, motor drive supervisors, smart energy concentrators, and medical patient monitors. The dual-Ethernet and dual-USB OTG capability enables redundant fieldbus and device connectivity in industrial networking designs.
When designing with this MPU, ensure the DDR memory layout uses matched-trace routing and proper decoupling; the heterogeneous topology also requires careful pin-mux assignment so that high-speed peripherals do not conflict with general-purpose I/O. A robust bootloader strategy is recommended to allow in-field firmware updates across both cores.
This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in a single manufacturer datasheet, giving engineers a single reference for sourcing the Vybrid VF6xx dual-core MPU.
드롭인 대체품: MVF62NN151CMK40 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MVF61NN151CMK40
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MVF60NN151CMK40
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PVF62NN151CMK40
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MVF62NN151CMK40 최대 정격 & 전기적 특성
| Family | Vybrid VF6xx (VFxxx F Series) |
| Part Number Designator | MVF62NN151 |
| Core Architecture | Heterogeneous dual-core (ARM Cortex-A5 + ARM Cortex-M4) |
| Cortex-A5 Max Frequency | 400 MHz |
| Cortex-M4 Max Frequency | 266 MHz |
| On-chip SRAM | 1.5 MB |
| Core Voltage | 1.23 V |
| I/O Supply Voltage | 3.3 V |
| 패키지 | 364-LFBGA (MAPBGA, 17x17 mm, 0.8 mm pitch) |
| USB Controllers | Dual USB 2.0 OTG with integrated PHY |
| Ethernet Controllers | Dual 10/100 Ethernet with L2 switch |
| External Memory | DDR2/DDR3 controller (per Vybrid VF6xx datasheet) |
| 실장 유형 | Surface Mount (BGA) |
| RoHS 상태 | Compliant (per DigiKey listing) |
MVF62NN151CMK40 364-lfbga (mapbga, 17x17 mm, 0.8 mm pitch) 핀 구성 가이드
MVF62NN151CMK40(364-lfbga (mapbga, 17x17 mm, 0.8 mm pitch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MVF62NN151CMK40.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MVF62NN151CMK40 적합 용도: 6 애플리케이션s: Industrial HMI Panels, Factory Automation Controllers, Building Automation Gateways, Motor Drive Supervisors, Smart Energy Concentrators, Medical Patient Monitors.
Industrial HMI Panels
The MVF62NN151CMK40 is purpose-built for industrial HMI panels requiring both rich graphics (driven by the Cortex-A5 at 400 MHz running Linux/Qt) and real-time touch/keyboard handling (delegated to the Cortex-M4 at 266 MHz). Its dual 10/100 Ethernet with L2 switch allows redundant fieldbus connectivity, while the 1.5 MB on-chip SRAM buffers frame-buffer workloads without external memory pressure. The 364-MAPBGA package fits behind the LCD backlight area in compact panel-mount enclosures, and the dual USB 2.0 OTG ports support both programming/debug and external peripherals (barcode scanners, RFID readers). Compared with single-core Cortex-A5 solutions, the heterogeneous topology eliminates the need for a companion MCU, reducing BOM and EMC complexity in factory-floor installations.
추천
Factory Automation Controllers
In factory automation controllers the MVF62NN151CMK40's Cortex-M4 handles deterministic field I/O (PROFIBUS, EtherCAT slave, or CANopen) while the Cortex-A5 runs a SCADA / OPC-UA gateway stack on Linux. The integrated dual Ethernet ports enable ring-network redundancy (MRP) without an external switch IC. With 1.5 MB SRAM and DDR2/DDR3 controller support, the device can buffer trend logs locally before pushing to the cloud. The 364-LFBGA footprint is shared across the Vybrid VF6xx family, allowing designers to drop in lower-cost MVF60 variants on volume SKUs without re-layout, an important NXP value proposition for product-line scaling.
추천
Building Automation Gateways
Building automation gateways benefit from the MVF62NN151CMK40's combination of Ethernet, USB, and multiple serial peripherals. The A5 core runs a BACnet/Modbus-to-Cloud translator (MQTT, HTTP), while the M4 core performs real-time HVAC damper control loops. Its -40C to +85C industrial temperature range tolerates basement equipment rooms, and the dual-core isolation lets engineers harden security boundaries between IP-facing and OT-facing firmware. The 364-MAPBGA package is well-suited to fanless DIN-rail enclosures where vibration and thermal stress demand a robust BGA versus a leaded QFP.
추천
Motor Drive Supervisors
The MVF62NN151CMK40's Cortex-M4 core, with its DSP extensions and 266 MHz headroom, can execute field-oriented control (FOC) loops for permanent-magnet motors. The A5 core simultaneously runs the operator-interface GUI and the predictive-maintenance analytics. Dual USB OTG ports accept firmware updates from a service laptop, while the dual-Ethernet interface supports EtherCAT master/slave bridging. The Vybrid VF6xx family reference designs from NXP show how the device replaces a discrete MCU+ASIC architecture, cutting PCB area by ~40 percent and reducing BOM cost in industrial inverter designs.
추천
Smart Energy Concentrators
Smart energy concentrators aggregate data from thousands of smart meters via M-Bus, wireless M-Bus, or PLC. The MVF62NN151CMK40 handles protocol stacks on the M4 core (deterministic real-time processing) while the A5 core runs the head-end application and TLS-secured uplink to the utility back-office. The dual Ethernet ports allow direct connection to the utility WAN and an internal diagnostic LAN simultaneously. With 1.5 MB on-chip SRAM, the concentrator can buffer minutes of meter data locally during WAN outages, an essential capability for grid resilience. The 364-MAPBGA package fits the small-form-factor concentrator enclosures used in residential meter rooms.
추천
Medical Patient Monitors
Medical patient monitors leverage the MVF62NN151CMK40's deterministic M4 core for safety-critical signal acquisition (ECG, SpO2, NIBP) and its A5 core for the touch-screen GUI, trend storage, and HL7/DICOM export. The dual-Ethernet interface enables isolated hospital-network connectivity plus a service-port LAN, supporting IEC 60601-1 isolation requirements with external magnetics. The 1.5 MB on-chip SRAM is partitioned to ensure the real-time waveform buffer is never starved by the GUI subsystem, an important safety property. The 364-LFBGA package suits compact bedside-monitor form factors where PCB area is at a premium.
추천
추천 제품 요약
엔지니어링 참조 데이터: MVF62NN151CMK40 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MVF61NN151CMK40 | MVF60NN151CMK40 | PVF62NN151CMK40 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 364-LFBGA (MAPBGA, 17x17) | 364-LFBGA (MAPBGA, 17x17) - same | 364-LFBGA (MAPBGA, 17x17) - same | 364-LFBGA (MAPBGA, 17x17) - same |
| Core 1 | ARM Cortex-A5 400 MHz | ARM Cortex-A5 400 MHz | ARM Cortex-A5 (lower freq) | ARM Cortex-A5 400 MHz |
| Core 2 | ARM Cortex-M4 266 MHz | None (single-core) | None (single-core) | ARM Cortex-M4 266 MHz |
| Ethernet | Dual 10/100 + L2 switch | Dual 10/100 + L2 switch | Single 10/100 | Dual 10/100 + L2 switch |
| USB | Dual USB 2.0 OTG + PHY | Dual USB 2.0 OTG + PHY | Single USB 2.0 OTG | Dual USB 2.0 OTG + PHY |
| Use Case Tier | Dual-core heterogeneous, premium | High-end single-core | Mid-tier single-core | Prototype (same die) |
주요 차별점
- Heterogeneous dual-core A5 + M4 in single BGA (vs MVF61NN151CMK40)
- Dual Ethernet + Dual USB OTG integration (vs MVF60NN151CMK40)
- Production-grade MVF vs prototype PVF ordering (vs PVF62NN151CMK40)
설계 노트
The 364-MAPBGA package (0.8 mm pitch) demands 4-layer PCB stack-up with matched 50 ohm impedance for DDR traces. Use a 1 oz copper outer layer and a solid ground plane on layer 2 directly beneath the BGA to provide a low-inductance return path. Per the NXP VF6xx hardware design guide, route DDR traces first with length-matching within 50 mil tolerance and keep high-speed signals (USB, Ethernet) on the opposite side of the PCB from the DDR bus to minimize crosstalk.
Estimated: At the maximum junction temperature of 125C and an ambient of 85C, the MVF62NN151CMK40 dissipates approximately 1.8 W when both cores are active. The 17x17 MAPBGA has a theta_JA of roughly 25 C/W on a 4-layer JEDEC test board, yielding a temperature rise of 45 C above ambient at full load. For sealed enclosures with restricted airflow, derate by adding a thermal pad or copper heat-spreader bonded to the BGA top side. Always validate with a thermal probe on prototype hardware.
Do not confuse the MVF prefix (production VF6xx) with the PVF prefix (prototype/pre-production) when ordering - both share the same die but different reliability screening. Also be aware that the Vybrid VF6xx series has been reclassified by NXP as 'long-term availability' rather than active mass production, so plan second-source qualification upfront. Avoid using the M4 core's DSP extensions without enabling the SIMD pipeline - misconfigured toolchains will fall back to scalar execution and miss real-time deadlines.
Place decoupling capacitors (100 nF X7R) within 2 mm of every power ball, with a 4.7 uF bulk capacitor on each supply rail. The 1.23 V core rail is particularly sensitive - use a ferrite bead plus 22 uF polymer cap to suppress switching noise from the DDR controller. Per NXP reference designs, the USB PHY differential pair (D+/D-) requires 90 ohm impedance and length-matching within 150 mil; the same rule applies to the Ethernet differential pairs.
규정 준수 정보
RoHS and lead-free per DigiKey listing. Standard MVF ordering code is industrial-grade; AEC-Q100 variants use different ordering codes (NN vs AN/AE). Verify exact compliance attributes with the NXP product selector before deployment.
