Texas Instruments

OPA627AM - 55V/us Precision JFET Op Amp | Texas Instruments

부품 번호: OPA627AM ✗ 단종
0.8 uV/°C Vdss -25°C to 85°C Package
MOQ: 1 |

OPA627AM 개요

The Texas Instruments OPA627AM is a precision high-speed JFET-input operational amplifier with a 55 V/us slew rate and maximum input-voltage drift of 0.8 uV/°C, supplied in an 8-pin TO-CAN (LMC, TO-99) package. The device is designed for low-noise signal conditioning, instrumentation, audio and precision analog systems where low distortion, high slew rate and accurate low-frequency behavior are important.

An operational amplifier is an active analog component that uses high-gain differential amplification to increase the voltage difference between its two inputs. In the broader hierarchy, an operational amplifier belongs to the amplifier IC family, which supports analog signal conditioning within electronic control, measurement, audio and communication systems. The OPA627AM uses a precision JFET-input architecture, combining low input-bias current with low-noise operation and wide input-voltage capability.

The main performance characteristics include a 55 V/us slew rate, 0.8 uV/°C maximum drift and operation from 9 V to 36 V, equivalent to ±4.5 V to ±18 V in dual-supply operation. The manufacturer specifies many operating characteristics from -25°C to 85°C for P and D packages and from -55°C to 125°C for the LMC package. Its 8-pin metal-can package supports traditional through-hole PCB layouts and robust thermal conduction compared with a small plastic package.

OPA627AM is suited to precision amplifier stages, low-level sensor interfaces, laboratory measurement systems, audio preamplifiers and high-fidelity signal paths. Its high slew rate allows large-amplitude signals to be reproduced quickly, while the low drift characteristic helps preserve offset stability as temperature changes. The JFET input stage is particularly useful in circuits requiring low input-bias current and high input impedance.

When designing around the OPA627AM, pay close attention to supply bypass capacitors, input-bias-current return paths and output-current limits. Decoupling capacitors should be placed close to the supply pins, and the circuit should avoid long PCB traces that increase leakage or susceptibility to interference. Input common-mode voltage and output swing must remain within the limits published for the selected package and supply configuration.

This page combines the OPA627AM technical description, application guidance, pin-level design information, lifecycle considerations and replacement analysis. The design notes and comparison guidance focus on practical implementation decisions for engineers who need to preserve signal-chain performance when qualifying an operational amplifier for a new PCB or maintaining an existing precision analog board.

드롭인 대체품: OPA627AM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: OPA627AM (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Package.

Texas Instruments
Mounting Type: Through Hole
Package: TO-99-8 (metal can)
비교 대상: OPA627AM →

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

OPA627AM 최대 정격 & 전기적 특성

Product Type Precision high-speed JFET-input operational amplifier
Number of Circuits 1 circuit
Slew Rate 55 V/us
Maximum Input Voltage Drift 0.8 uV/°C
Supply Voltage Range 9 V to 36 V
Dual-Supply Operating Range ±4.5 V to ±18 V
General-Purpose Temperature Range for P and D Packages -25°C to 85°C
LMC Package Temperature Range -55°C to 125°C
패키지 8-pin TO-CAN (LMC / TO-99)
실장 유형 Through-hole
Input Architecture JFET input
Application Category Instrumentation operational amplifier

OPA627AM 8-pin to-can (lmc / to-99) 핀 구성 가이드

OPA627AM(8-pin to-can (lmc / to-99) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

OPA627AM의 8-pin to-can (lmc / to-99) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: OPA627AM.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

OPA627AM 적합 용도: 6 애플리케이션s: Precision Instrumentation Amplifier, Low-Level Sensor Interface, High-Fidelity Audio Preamp, Laboratory Measurement Front End, Active Audio Filter, Industrial Control Signal Conditioning.

🔧

Precision Instrumentation Amplifier

OPA627AM fits low-level instrumentation stages where signal integrity, low drift and accurate differential measurement matter. Its published 55 V/us slew rate allows the amplifier to follow fast input transitions without the severe distortion associated with a slower large-signal response. The 0.8 uV/°C maximum drift specification also supports stable measurements as ambient temperature changes. Place close-fitting bypass capacitors at the supply pins, route the differential input as a short pair, and confirm the actual input and output operating limits in the manufacturer data before setting the gain and feedback network.

🧩

Low-Level Sensor Interface

OPA627AM can serve as the first high-input-impedance stage in a sensor interface when the design benefits from JFET inputs and a 55 V/us slew rate. The amplifier helps preserve small sensor signals before later filtering or digitization, while its low maximum drift specification supports measurement stability over temperature changes. The circuit should include a defined input bias-current return path, protection appropriate to the sensor source and supply bypassing close to the package. Confirm the common-mode range at the selected supply voltage because sensor output levels can move close to either rail.

🎧

High-Fidelity Audio Preamp

OPA627AM is appropriate for a precision preamplifier or active-filter stage where the combination of high slew rate and low drift supports faithful signal reproduction. The 55 V/us slew-rate specification provides ample dynamic response for audio waveforms, while the JFET-input architecture suits high-impedance sources. The amplifier is placed in a conventional inverting or non-inverting precision topology, with feedback components selected for the intended gain and bandwidth. Check the output swing against the maximum audio amplitude and use short, shielded input routing to reduce hum pickup and radio-frequency interference.

🧪

Laboratory Measurement Front End

OPA627AM is well suited to laboratory instrumentation because it combines a fast 55 V/us large-signal response with a maximum drift of 0.8 uV/°C. The fast response reduces distortion when the amplifier must process transient or periodic signals with significant amplitude. In a practical measurement front end, use the amplifier with clean regulated supplies, low-leakage input construction and carefully selected feedback resistors. Place the device close to the active sensor or source, avoid long high-impedance traces, and use guarding or shielding if moisture or surface contamination could disturb the input node.

🎚️

Active Audio Filter

OPA627AM can implement a precision active-filter section when the signal path requires both accurate frequency response and strong large-signal behavior. Its 55 V/us slew rate helps preserve low distortion through filter transitions, while the low drift specification contributes to stable gain over changing temperature. Component tolerances and the amplifier's actual noise, gain and stability parameters must be evaluated to determine whether the topology meets the filter requirement. Place input, feedback and grounding components to minimize parasitic coupling, and verify phase margin using the manufacturer's recommended stability techniques.

🏭

Industrial Control Signal Conditioning

OPA627AM can condition low-level control or sensor signals in an industrial system where fast response and temperature-stable behavior are valuable. Its 1-circuit design allows the amplifier to be placed where the signal is strongest, avoiding long analog traces and reducing noise pickup. The circuit operates from 9 V to 36 V, providing flexibility for industrial supply rails, but the dual-supply and single-supply input and output ranges must be checked for each application. Use local supply decoupling, robust grounding and input protection suitable for the factory environment.

What is the operating voltage of OPA627AM?
The OPA627AM operates from 9 V to 36 V, equivalent to ±4.5 V to ±18 V with dual supplies. According to the Texas Instruments OPA627 datasheet, this supply range supports precision analog systems using either single-ended or split-rail power architectures. The 8-pin LMC package is rated for operation from -55°C to 125°C, making the device suitable for industrial and instrumentation environments where temperature stability is important. Verify the absolute maximum ratings and common-mode limits for the intended supply configuration before finalizing the circuit.
What are the key specifications of OPA627AM that engineers should know?
The OPA627AM is a one-circuit, precision high-speed JFET-input operational amplifier specified for a 55 V/us slew rate and maximum drift of 0.8 uV/°C. Texas Instruments describes it for operation from 9 V to 36 V, or ±4.5 V to ±18 V in dual-supply operation. The part is offered in the 8-pin TO-CAN LMC package, designated TO-99. Its principal application roles include instrumentation, low-level signal conditioning, precision audio amplification and other high-speed analog signal paths.
Where can I download the OPA627AM datasheet PDF?
The official OPA627AM datasheet is available through the Texas Instruments OPA627 product page, which contains the manufacturer PDF and ordering information. The manufacturer describes OPA627 as a 55 V/us, high-speed precision operational amplifier with a 0.8 uV/°C maximum drift. The document covers the OPA627 family and its package options. For OPA627AM, confirm that the package and ordering table identify the LMC or TO-99 configuration rather than a plastic or surface-mount variant.
Where can I find the OPA627AM pinout?
The OPA627AM pinout is shown in the pin-configuration section of the manufacturer OPA627 datasheet. The device contains eight pins in a TO-CAN LMC package and includes offset null, compensation, power-supply, input and output connections. Assign PCB tracks according to the numbered metal-can orientation rather than adapting an SOIC-8 drawing. Because the manufacturer drawing controls physical orientation, use it directly when establishing the footprint, locating the package keyway and verifying signal flow.
What is the difference between OPA627AM and OPA828?
The OPA828 is a newer precision JFET-input operational amplifier that Texas Instruments discusses as a modern replacement for legacy OPA627 designs, but it is not established here as a same-package replacement for the OPA627AM. The OPA627AM uses an 8-pin TO-CAN LMC package, while replacement qualification must verify the candidate package, pin arrangement, supply limits, stability and compensation requirements. The manufacturer comparison also indicates wider bandwidth, higher slew rate and rail-to-rail output capability for OPA828, making it potentially attractive for a redesigned board rather than an automatic physical substitution.
When should I choose OPA627AM over OPA828?
Choose the OPA627AM when maintaining a legacy TO-99 precision-amplifier board is more important than adopting newer rail-to-rail features. Its defining published characteristics are a 55 V/us slew rate, 0.8 uV/°C maximum drift and operation from 9 V to 36 V. The OPA828 may provide wider bandwidth, higher slew rate and rail-to-rail output, but those improvements do not establish identical pin compatibility in the TO-CAN package. For a new design, compare the complete electrical limits and stability requirements rather than relying only on the operational-amplifier family relationship.
What is the best drop-in replacement for OPA627AM?
No directly verified drop-in replacement for the 8-pin TO-CAN OPA627AM was established from the available manufacturer and cross-reference information. Texas Instruments identifies OPA828 as a modern replacement option for OPA627 designs, but an engineering swap still requires package, pinout, biasing, compensation and supply compatibility checks. Existing boards should therefore retain the OPA627AM where approved, or use a qualified redesign around a modern package. An adapter board or footprint change is not a true drop-in substitution.
Can OPA828 replace OPA627AM without changing the PCB?
An OPA828 swap should not be assumed to work without modification on an OPA627AM board. The OPA627AM is specified in an 8-pin TO-CAN LMC package, and the available replacement information does not establish that OPA828 uses the same mechanical footprint and pin assignment. Texas Instruments support discussions also show that even a manufacturer-described replacement can require system-level checks. Review the manufacturer pin descriptions, operating ranges, stability network and application circuit before approving any replacement.
Is OPA627AM suitable for precision audio amplifier applications?
The OPA627AM is suitable for precision audio signal paths because it combines a 55 V/us slew rate with low-drift JFET-input operation. According to the Texas Instruments OPA627 product information, the family is intended for high-speed precision signal conditioning and can serve audio amplifier stages requiring accurate low-frequency behavior. The designer must still verify output swing, output-current capability, noise and distortion against the available operating data. Headroom should be maintained so the output does not enter nonlinear regions at peak signal levels.
What is the lead time for OPA627AM?
Current lead time for the obsolete OPA627AM should be requested through the Request a Quote form on this page. The official part-details page remains the authoritative reference for lifecycle and ordering information, while an obsolete status means production availability should not be assumed. Include the required quantity, date code and target shipment schedule with the inquiry. For new production, ask the manufacturer or an authorized source whether any supported supply remains rather than planning around an unconfirmed inventory quantity.
Is OPA627AM in stock?
Current stock for the obsolete OPA627AM must be confirmed through the Request a Quote form on this page. Although legacy distributor listings can remain visible after the original manufacturer lifecycle ends, their presence does not guarantee available production quantity or a future supply schedule. State the required package suffix, quantity and acceptable date-code criteria in the request. Engineers launching a new design should also evaluate a currently supported amplifier instead of depending on intermittent legacy inventory.
Where can I buy OPA627AM online?
Use the Request a Quote form on this page to request OPA627AM pricing, stock confirmation and lead time. The Texas Instruments part-details page identifies OPA627AM as the 8-pin TO-CAN LMC ordering option, which helps prevent confusion with other OPA627 package variants. Because the component is obsolete, availability may be limited and can vary by quantity and date code. Include the target quantity and manufacturing schedule so the response can reflect the actual procurement requirement.
What is the price of OPA627AM?
Current OPA627AM pricing should be requested through the Request a Quote form on this page. Because the device is obsolete and stock is limited, the appropriate commercial answer depends on quantity, condition, date code and shipment schedule. The product page can connect the request with the available quotation workflow instead of presenting a potentially stale catalog amount. For production planning, provide the annual usage and required delivery dates so the quotation can reflect a realistic supply plan.
What does the OPA627AM lifecycle status mean for maintenance designs?
The obsolete lifecycle status means new OPA627AM production should not be assumed, although legacy stock may remain available for maintenance. For an existing medical, industrial or audio system, the safest path is to retain qualified stock and document its traceability. For a new design, evaluate a currently supported precision operational amplifier and allow time for schematic, layout and qualification changes. The OPA828 family may provide a modern starting point, but its package and electrical requirements must be reviewed rather than treated as a guaranteed physical substitution.
Does OPA627AM comply with RoHS and REACH?
The OPA627AM compliance status should be confirmed with the manufacturer or the applicable product environmental documentation before using it in a new qualification. RoHS and REACH declarations depend on the exact orderable part and the applicable jurisdictional and contractual requirements, so no blanket conclusion should be assumed from the amplifier category. For maintenance procurement, request current documentation tied to the manufacturer, lot and shipment. Compliance documentation should also be evaluated separately from electrical and mechanical second-source qualification.
What is the best Analog Devices equivalent for OPA627AM?
The best Analog Devices equivalent for OPA627AM must be selected by matching the complete amplifier requirements and the physical package, not by low-noise or JFET-input status alone. The available cross-reference information identifies Analog Devices among potential manufacturers but does not establish a verified TO-99, pin-to-pin replacement with quantified parametric proximity. Treat any candidate as a redesign candidate until its footprint, offset-null connections, compensation method, common-mode range, output swing and stability are checked. A same-function amplifier in a different package is not a drop-in replacement.

엔지니어링 참조 데이터: OPA627AM — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Select OPA627AM when maintaining an existing 8-pin TO-CAN precision amplifier board requires the legacy Texas Instruments device, particularly in instrumentation, low-level sensor interfaces or high-fidelity audio equipment. Its published 55 V/us slew rate and 0.8 uV/°C maximum drift remain useful in fast, temperature-sensitive signal paths. For new designs, evaluate currently supported operational amplifiers because the OPA627AM is obsolete and long-term production continuity is limited. OPA828 is a modern design alternative with wider bandwidth, higher slew rate and rail-to-rail output, but it should not be treated as an automatic TO-CAN drop-in replacement. Any second source must pass mechanical, electrical, stability and system-level validation before production release.

대체품과의 비교

파라미터 이 제품
Package 8-pin TO-CAN (LMC / TO-99)
Brand Texas Instruments
Amplifier Type Precision JFET-input operational amplifier
Number of Circuits 1 circuit
Slew Rate 55 V/us
Maximum Input Voltage Drift 0.8 uV/°C
Supply Voltage Range 9 V to 36 V
Dual-Supply Operating Range ±4.5 V to ±18 V
LMC Package Temperature Range -55°C to 125°C

설계 노트

Follow the numbered TO-CAN orientation in the manufacturer pin-configuration drawing when creating the footprint. A metal-can package requires careful attention to the locating feature, lead spacing and hole pattern because it does not match an SOIC-8 land pattern. Confirm mechanical dimensions against the current package drawing and place the device where its metal case can make direct thermal contact to copper where practical.

Place the supply bypass capacitors immediately between each supply pin and ground, with the shortest possible traces and a direct ground return. The OPA627AM operates from 9 V to 36 V, but the selected rail arrangement still needs enough headroom for the intended input and output voltages. Check decoupled supply behavior with an oscilloscope because high-speed amplification can expose inadequate bypassing even when a slow bench test appears satisfactory.

Do not substitute an amplifier solely because it is also called a precision JFET op amp. The OPA627AM is an obsolete 8-pin TO-CAN device, and a modern replacement may use a different package, pinout, compensation arrangement or output-swing range. Before changing a legacy design, compare every pin, confirm common-mode and output limits, and validate stability and distortion on the intended board.

Route differential inputs as a compact pair and keep feedback components close to the amplifier pins. High-impedance input nodes should be protected from contamination, flux residue and moisture because leakage can disturb the bias point. For audio and instrumentation circuits, use a quiet ground reference and consider guarding or shielding if the source impedance is high or the enclosure shares earth connections with switching equipment.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations were not stated in the manufacturer and distributor information. Obtain product-specific environmental documentation for the exact orderable part and shipment.

관련 검색

OPA627AM datasheet OPA627AM pinout OPA627AM datasheet pdf OPA627AM TO-99 pinout OPA627AM equivalent OPA627AM replacement OPA627AM drop-in replacement OPA627AM price OPA627AM stock OPA627AM vs OPA828 Texas Instruments OPA627AM OPA627AM 55V/us op amp OPA627AM precision amplifier OPA627AM obsolete replacement

관련 부품 & 용어

Texas Instruments OPA627AM OPA627 OPA828 precision operational amplifier JFET-input operational amplifier amplifier IC analog signal conditioner DIFET slew rate input voltage drift input bias current high input impedance TO-99 TO-CAN LMC package 8-pin metal-can package through-hole package instrumentation amplifier precision audio preamplifier active filter laboratory measurement industrial signal conditioning RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기