Texas Instruments

OPA847ID - 3.9GHz Ultra-Low-Noise Op Amp | Texas Instruments

부품 번호: OPA847ID ✓ 활성
0.85 nV/√Hz Vdss 18 mA Id 8-SOIC (SOIC-8) Package
MOQ: 1 |

OPA847ID 개요

The Texas Instruments OPA847ID is a wideband, ultra-low-noise, voltage-feedback operational amplifier with shutdown capability, optimized for high-speed signal-chain applications. The device operates at up to 3.9 GHz, provides 0.85 nV/√Hz input-noise voltage density, and is available in an 8-SOIC package. Its combination of bandwidth, low noise, and an optional shutdown function makes it suitable for instrumentation, communications, test and measurement, video, and high-speed analog signal-processing systems.

An operational amplifier is an active analog component that provides voltage amplification and signal buffering within a feedback network. Voltage-feedback operational amplifiers use the inverting input as the primary high-frequency feedback node, making them suitable for closed-loop gains ranging from low-level instrumentation to high-speed communications. The OPA847 belongs to the broader hierarchy of analog amplifiers, signal-chain ICs, and power-management-independent semiconductor components.

The OPA847ID combines 3.9 GHz gain-bandwidth performance with 0.85 nV/√Hz input-noise voltage density. Its 18 mA supply current supports low-power operation compared with many wideband amplifiers, while the shutdown pin can disable the amplifier when power reduction is required. The device is designed for applications where preserving signal fidelity and bandwidth is more important than using a general-purpose precision amplifier.

Because the OPA847 is a voltage-feedback amplifier, feedback-network design, source impedance, output loading, and trace geometry determine practical performance. The manufacturer datasheet describes operation with resistive feedback and recommends careful attention to high-frequency stability and output loading. The 8-SOIC package provides a compact surface-mount implementation, but decoupling and layout discipline remain essential when using the amplifier at high bandwidth.

Typical uses include high-impedance instrumentation buffers, broadband transimpedance stages, RF and IF signal conditioning, communications receivers, video electronics, precision test equipment, and low-noise signal acquisition. The shutdown function is useful in portable or intermittently powered systems where the amplifier does not need to remain active continuously.

When placing the OPA847ID, keep power-supply bypass capacitors close to the supply pins, provide a low-inductance return path, and route high-speed feedback and signal traces away from noisy switching nodes. Confirm output loading and feedback resistor values against the datasheet before operating near the device's upper bandwidth range.

This product page combines the manufacturer's OPA847 documentation, distributor package information, operating specifications, practical layout guidance, and same-package replacement guidance. It helps engineers distinguish the OPA847ID from lower-bandwidth or noisier alternatives while keeping the focus on pin compatibility, bandwidth, noise performance, and application fit.

드롭인 대체품: OPA847ID — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: OPA847ID (동일 폼 팩터 및 풋프린트) — 차이점: Package, Primary Application.

Analog Devices
Package: 8-lead SOIC
Primary Application: Single-supply xDSL CPE line driving
비교 대상: OPA847ID →
Analog Devices
Package: 8-pin SOIC
Primary Application: xDSL customer-premises equipment
비교 대상: OPA847ID →

OPA847IDR

✅ 드롭인
📦 8-SOIC (SOIC-8)
Same OPA847 family and 8-SOIC package; ordering suffix and delivery format must be checked for grade and temperature differences

📋 참조 대체품 (카탈로그에 없음)

OPA847IDG4

✅ 드롭인
📦 8-SOIC (SOIC-8)
Same OPA847ID family and 8-SOIC package; exact ordering and qualification differences require confirmation

📋 참조 대체품 (카탈로그에 없음)

OPA842IDR

✅ 드롭인
📦 8-SOIC (SOIC-8)
Same manufacturer and 8-SOIC package; electrical feature and noise differences must be verified against the OPA847 datasheet

📋 참조 대체품 (카탈로그에 없음)

AD8018ARZ

✅ 드롭인
Analog Devices
📦 8-SOIC (SOIC-8)
Dual high-speed current-feedback operational amplifier · 2 channels · 5 V · 300 V/µs · 54 dB · -40°C to +85°C · 8-pin SOIC · 8 pins

가격 문의

데이터시트 보기 →

AD8017ARZ

✅ 드롭인
Analog Devices
📦 8-SOIC (SOIC-8)
Dual high-speed current-feedback operational amplifier · 2 channels · 2 circuits · 7 mA · +12 V · 200 mA typical · Within 1.0 V of the supply rail · 10 V peak-to-peak

가격 문의

데이터시트 보기 →

OPA847ID 최대 정격 & 전기적 특성

Product Type Wideband voltage-feedback operational amplifier with shutdown
Gain-Bandwidth Product 3.9 GHz
Input Noise Voltage Density 0.85 nV/√Hz
공급 전류 18 mA
Shutdown Function Yes
Feedback Topology Voltage feedback
Circuit Count 1 circuit
패키지 8-SOIC (SOIC-8)
실장 유형 Surface mount

OPA847ID 핀 구성

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
핀 1 NC — Not connected (per datasheet)
핀 2 IN- — Inverting input
핀 3 IN+ — Non-inverting input
핀 4 V- — Negative supply
핀 5 NC — Not connected (per datasheet)
핀 6 OUT — Output
핀 7 V+ — Positive supply
핀 8 SD — Shutdown control

일반적인 애플리케이션

OPA847ID 적합 용도: 6 애플리케이션s: Broadband Instrumentation Signal Conditioning, RF and IF Signal Chains, Communications Receiver Front Ends, High-Speed Test and Measurement, Low-Noise Video Electronics, Portable and Pulsed Analog Systems.

🧰

Broadband Instrumentation Signal Conditioning

The OPA847ID fits instrumentation front ends that need to preserve small signals while operating across a wide frequency range. Its 3.9 GHz gain-bandwidth product allows useful closed-loop amplification well beyond ordinary precision-op-amp bandwidth, while 0.85 nV/√Hz input-noise density helps reduce input-referred noise in measurements involving weak sensor or source signals. Use the device in a voltage-feedback configuration with resistor values selected from the manufacturer datasheet. Keep the feedback loop compact, provide local supply bypass, and use a continuous ground plane to prevent layout parasitics from degrading the measured response.

🌐

RF and IF Signal Chains

OPA847ID is appropriate for RF and IF conditioning stages requiring both bandwidth and low input noise. The 3.9 GHz gain-bandwidth product supports high-frequency closed-loop operation, while 0.85 nV/√Hz noise density helps avoid degrading weak receiver signals close to the amplifier input. Place the amplifier where the source and feedback connections are short, and verify the target gain against the datasheet stability guidance. If the source is not 50-ohm terminated, account for the effective load and reflection behavior in the overall signal path.

📡

Communications Receiver Front Ends

The OPA847ID can be used in communications receivers where low-noise amplification and wide bandwidth are both important. Its 0.85 nV/√Hz input-noise voltage density supports weak-signal preservation, and its 3.9 GHz upper bandwidth leaves room for wideband IF or baseband stages. The 18 mA supply current is also relevant in portable receiver designs, although shutdown allows the amplifier to be disabled during inactive periods. Match the circuit to the intended frequency band, impedance, gain, and output-load requirements before releasing the layout.

🖥️

High-Speed Test and Measurement

OPA847ID supports high-speed test and measurement systems that amplify low-amplitude signals without relying on narrow-band precision amplifiers. The 3.9 GHz gain-bandwidth product is useful for wideband probe buffers, pulse and waveform conditioning, and high-speed sensor interfaces. The amplifier's 0.85 nV/√Hz input noise helps retain signal-to-noise ratio, while the 18 mA supply current supports compact instrumentation. Use short feedback traces, minimize loop area, and isolate sensitive input routing from clock and switching circuitry to preserve practical bandwidth.

📺

Low-Noise Video Electronics

OPA847ID can be used in video and other high-speed analog systems requiring low-noise amplification and wide bandwidth. The 3.9 GHz gain-bandwidth product is well suited to buffering and gain stages operating above the bandwidth of conventional audio amplifiers, while 0.85 nV/√Hz input noise helps maintain signal integrity. Keep the input and feedback paths short, terminate unused inputs according to the datasheet, and check output loading against the required video impedance. The device should be evaluated for the specific video standard, rise-time requirement, and output buffer topology.

📱

Portable and Pulsed Analog Systems

The OPA847ID is useful in portable or intermittently operating analog systems because it combines a 3.9 GHz gain-bandwidth product with an 18 mA supply current and a shutdown function. When the signal chain is active, the amplifier can provide low-noise, wideband gain; when it is idle, the shutdown pin can reduce power consumption. Design the control logic so the amplifier is enabled only when signal integrity requirements are met, and verify startup behavior around the shutdown pin. Maintain short bypass-capacitor connections so the supply remains stable during rapid enable and disable transitions.

What is the OPA847ID used for?
The OPA847ID is a wideband, ultra-low-noise voltage-feedback operational amplifier with shutdown, intended for high-speed signal conditioning and instrumentation. According to the Texas Instruments product page, it combines very high gain-bandwidth performance with low input-noise voltage and a 3.9 GHz upper bandwidth, making it useful in RF/IF signal chains, test equipment, communications, and video circuits. The shutdown function can reduce power consumption in systems that do not require continuous amplification.
What is the gain-bandwidth product of OPA847ID?
The OPA847ID has a gain-bandwidth product of 3.9 GHz. This high bandwidth allows the amplifier to provide useful closed-loop gain across a much wider frequency range than conventional precision op amps. The OPA847 product information identifies the device as a wideband voltage-feedback amplifier, and the OPA847ID is the 8-SOIC ordering variant. Actual usable bandwidth depends on the selected feedback network, circuit topology, output loading, and PCB layout.
What is the input noise voltage density of OPA847ID?
The OPA847ID provides an input noise voltage density of 0.85 nV/√Hz. According to the Texas Instruments OPA847 product information, this low-noise performance is paired with high gain-bandwidth performance and an 18 mA supply current. The combination is useful when weak signals must be amplified without adding excessive noise, particularly in instrumentation, broadband receivers, and precision measurement front ends.
Does OPA847ID have a shutdown pin?
Yes. The OPA847ID includes an optional shutdown function, allowing the amplifier to be disabled when it is not needed. The Texas Instruments product page describes the OPA847 as a wideband, ultra-low-noise voltage-feedback operational amplifier with shutdown. In portable, pulsed, or intermittently active systems, shutdown can reduce power dissipation and help preserve energy while the signal chain is inactive.
What package does OPA847ID use?
The OPA847ID is packaged in an 8-SOIC package. The distributor product listing identifies the component as a one-circuit, voltage-feedback amplifier in an 8-SOIC package, while the package diagram library key for this assembly is soic-8. The package allows surface-mount assembly and is suitable for compact high-speed analog boards, although the 3.9 GHz device still requires careful decoupling and short, controlled routing.
Is OPA847ID suitable for RF and IF signal conditioning?
The OPA847ID is suitable for RF and IF signal conditioning when the design requires low input noise and wide bandwidth. Its 3.9 GHz gain-bandwidth product and 0.85 nV/√Hz input-noise density are stronger fit criteria than supply current alone. The amplifier should be used in a voltage-feedback topology with feedback values and loading checked against the manufacturer datasheet, since practical bandwidth and stability depend on the complete circuit.
What is the difference between OPA847ID and OPA842IDR?
The OPA847ID and OPA842IDR are both identified in the available comparison results, but the available data does not establish that their electrical specifications or pin functions are identical. The OPA847 is specifically described by Texas Instruments as a wideband, ultra-low-noise voltage-feedback amplifier with shutdown, 3.9 GHz bandwidth, 0.85 nV/√Hz noise density, and 18 mA supply current. Treat OPA842IDR as a candidate only after checking its manufacturer datasheet and pinout for exact replacement qualification.
Can OPA847IDR replace OPA847ID?
OPA847IDR is a likely same-family candidate for OPA847ID because it appears in the manufacturer-related comparison results and is identified as the same OPA847 family, but the available data does not provide the complete ordering, temperature, and packaging distinctions needed to guarantee a drop-in replacement. Confirm the manufacturer ordering table, pin functions, grade, and tape-and-reel configuration before substituting OPA847IDR in a production design.
When should I choose OPA847ID over a general-purpose operational amplifier?
Choose OPA847ID when the signal path needs the combination of 3.9 GHz bandwidth, 0.85 nV/√Hz input noise, and an 18 mA supply requirement that a general-purpose precision amplifier cannot provide. It is especially appropriate for wideband instrumentation, communications, RF/IF conditioning, and video signal paths. For lower-frequency precision measurements, a lower-noise, lower-bandwidth amplifier may be preferable.
Is OPA847ID suitable for low-noise measurement systems?
The OPA847ID can suit low-noise measurement systems when the required signal bandwidth is high and the front end must preserve weak signals. Its 0.85 nV/√Hz input-noise voltage density supports low-noise amplification, while 3.9 GHz bandwidth covers fast measurement and test signals. The final system performance still depends on source impedance, resistor noise, gain configuration, grounding, shielding, and the selected analog front end.
How should OPA847ID be decoupled on a PCB?
Place the OPA847ID power-supply bypass capacitors close to the supply pins and use the decoupling configuration recommended in the manufacturer datasheet. Keep the supply and ground return paths short and low-inductance, and avoid routing high-speed input, output, and feedback traces beside switching nodes or noisy digital lines. The 3.9 GHz bandwidth makes layout parasitics and return-path discontinuities significant, so use a continuous ground plane and controlled high-speed routing.
Where can I download the OPA847ID datasheet PDF?
Download the OPA847 datasheet PDF from the Texas Instruments official datasheet URL: https://www.ti.com/lit/ds/symlink/opa847.pdf. The manufacturer product page for OPA847 is https://www.ti.com/product/OPA847. Use the manufacturer's pin-description table, recommended application circuits, electrical characteristics, and ordering information when assigning pins and confirming the OPA847ID suffix.
Where can I find the OPA847ID pinout?
The OPA847ID pinout is shown in the pin-configuration section of the Texas Instruments OPA847 datasheet at https://www.ti.com/lit/ds/symlink/opa847.pdf. The device uses an 8-SOIC package, so the board footprint and pin numbering must follow the SOIC-8 library arrangement. Assign signal names and supply connections from the manufacturer pin-description table rather than inferring them from a distributor category page.
Where can I buy OPA847ID and check current availability?
Use the Request a Quote form on this page to request OPA847ID pricing, stock confirmation, lead time, and order quantities from XAIPART. The verified product listings confirm an 8-SOIC single-circuit voltage-feedback amplifier, but the available information does not establish a current transferable inventory position. The manufacturer product page remains the authoritative source for ordering options and lifecycle information.
What is the lead time for OPA847ID?
The current OPA847ID lead time is not stated in the available product information. Request the current lead time through the Request a Quote form on this page, and specify the required quantity and SOIC delivery format. Because OPA847ID is the 8-SOIC ordering variant, confirm the suffix, manufacturer packaging, and any trace-and-tape requirements before releasing the order.
Is OPA847ID active or obsolete?
The OPA847ID is treated as active because the Texas Instruments product page presents the OPA847 family as a current product with ordering and quality information, and current distributor listings reference the OPA847ID. Lifecycle status should still be confirmed at the time of purchase through the Request a Quote form, especially for older analog devices and specific SOIC availability.
What are the key specifications of OPA847ID that engineers should know?
The key OPA847ID specifications are 3.9 GHz gain-bandwidth product, 0.85 nV/√Hz input-noise voltage density, 18 mA supply current, voltage-feedback operation, shutdown capability, one amplifier circuit, and an 8-SOIC package. According to the Texas Instruments product information, the OPA847 combines high bandwidth with ultra-low input noise. These figures make it suitable for wideband low-noise signal conditioning rather than slow precision-only amplification.
What is the best replacement for OPA847ID?
OPA847IDR is the closest same-family replacement candidate identified in the available comparison results, but it should not be called a guaranteed drop-in replacement without checking the OPA847 ordering table and pin configuration. OPA842IDR is another candidate for evaluation, not a confirmed substitute, because its full pinout and electrical differences are not established in the available data. For a production substitution, compare bandwidth, noise, supply current, shutdown behavior, common-mode range, output swing, and package pins against the original requirements.
Is OPA847ID the same as OPA842IDR?
No conclusion that they are electrically identical can be drawn from the available data. The OPA847ID is a 3.9 GHz, 0.85 nV/√Hz, shutdown-capable OPA847 device, while OPA842IDR is only identified as a comparison candidate. Their pin functions, common-mode range, supply requirements, noise performance, slew rate, and stability characteristics must be checked independently before treating OPA842IDR as an equivalent or drop-in replacement.
Does OPA847ID meet RoHS requirements?
The RoHS status of OPA847ID cannot be confirmed from the available manufacturer and distributor snippets. The distributor comparison content references RoHS information, but the current verified excerpts do not provide a definitive compliance statement for the exact OPA847ID ordering variant. Request the current compliance and material documentation through the Request a Quote form, and use the Texas Instruments product page and datasheet for the authoritative declarations.

엔지니어링 참조 데이터: OPA847ID — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose OPA847ID when a design needs a wideband voltage-feedback amplifier with 3.9 GHz gain-bandwidth performance, 0.85 nV/√Hz input-noise density, and an 18 mA supply requirement. It is a strong fit for high-speed instrumentation, RF/IF conditioning, communications receivers, video signal paths, and test equipment where a general-purpose precision amplifier is too slow. OPA847IDR and OPA847IDG4 are same-family ordering candidates in the 8-SOIC package, but confirm the ordering table, grade, temperature range, and delivery format before substitution. OPA842IDR should be evaluated as a possible alternative only after checking its bandwidth, noise, shutdown, common-mode range, output swing, and pin functions. AD8018ARZ and AD8017ARZ may be useful in the same SOIC footprint, but they require direct electrical and pin-level qualification before use as replacements.

대체품과의 비교

파라미터 이 제품 OPA847IDR OPA847IDG4 OPA842IDR AD8018ARZ AD8017ARZ
Package 8-SOIC (SOIC-8) 8-SOIC (SOIC-8) 8-SOIC (SOIC-8) 8-SOIC (SOIC-8) 8-SOIC (SOIC-8) 8-SOIC (SOIC-8)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices

주요 차별점

  • High bandwidth paired with low input noise (vs OPA842IDR)
  • Integrated shutdown capability (vs AD8018ARZ)
  • Low 18 mA supply-current specification (vs AD8017ARZ)

설계 노트

Place the supply bypass capacitors immediately adjacent to the OPA847ID supply pins and connect them to a continuous ground plane. Keep the input, feedback, and output traces short, especially in high-gain or high-bandwidth layouts. Avoid placing sensitive input traces beneath or beside digital return paths and switching inductors. Because the device reaches 3.9 GHz, even small parasitic inductances and capacitance can materially alter closed-loop response.

Use the manufacturer voltage-feedback topology and recommended resistor values as the starting point for the signal chain. Check the output load, source impedance, and feedback network because the effective load can differ from the nominal circuit description. For RF or IF stages, use controlled impedance routing and avoid accidental capacitive loading on the inverting input. Confirm stability and bandwidth with the complete source, load, and feedback network rather than relying on the nominal gain-bandwidth figure alone.

The OPA847ID operates with 18 mA supply current according to the available manufacturer comparison information. Budget this current across the complete analog section and provide a supply capable of maintaining low noise under dynamic output conditions. If the shutdown function is used, define the enable state before signal-path activity and ensure the shutdown control is not left floating. Local decoupling and a low-impedance ground return are as important as the nominal supply capacity.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available distributor comparison material references RoHS and REACH information, but the current excerpts do not provide definitive compliance values for the exact OPA847ID ordering variant. Obtain current declarations from Texas Instruments or request them through the Request a Quote form.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

OPA847ID datasheet OPA847ID datasheet pdf OPA847ID pinout OPA847ID 8-SOIC OPA847ID 3.9 GHz OPA847ID 0.85 nV/√Hz OPA847ID replacement OPA847ID equivalent OPA847ID vs OPA842IDR OPA847ID price OPA847ID stock Texas Instruments OPA847ID

관련 부품 & 용어

Texas Instruments OPA847ID OPA847 OPA847IDR OPA847IDG4 OPA842IDR AD8018ARZ AD8017ARZ OPA828ID voltage-feedback operational amplifier operational amplifier analog amplifier signal-chain IC semiconductor gain-bandwidth product input noise voltage density shutdown function 8-SOIC SOIC-8 surface mount SMD RF signal conditioning IF signal conditioning instrumentation amplifier high-speed test and measurement
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기