PCM1738EG4 - 24-Bit Stereo Audio DAC | Texas Instruments
부품 번호: PCM1738EG4 ✓ 활성PCM1738EG4 개요
An audio DAC is a data converter that transforms digital audio samples into analog voltage signals suitable for amplification, headphone drive, line output, or further signal conditioning. The PCM1738 belongs to the DAC and audio converter hierarchy within integrated circuits, where precision sample reconstruction and low-noise analog output are central requirements.
Key features of the PCM1738EG4 include 24-bit resolution, stereo operation, support for serial digital audio data, and operation from a 4.75 V to 5.25 V supply range. Its 28-SSOP package, identified as 0.209 inch or 5.30 mm wide in the component listing, supports compact surface-mount layouts. The EG4 suffix denotes the tape-and-reel ordering configuration.
The converter uses a delta-sigma architecture to provide high-resolution digital audio reconstruction. The serial interface reduces the number of interconnects required when the DAC is connected to an audio codec, digital signal processor, USB audio interface, or embedded audio controller. This makes the device suitable for structured multichannel audio systems where channel synchronization and compact implementation are important.
Typical applications include consumer audio equipment, digital mixing consoles, active speakers, multimedia systems, and embedded audio platforms. The 192 kHz sampling-rate capability supports high-resolution audio workflows, while the 24-bit data width provides a 16,777,216-level representation for each digital sample.
The primary design consideration is correct implementation of the digital interface, analog output filtering, power-supply decoupling, and signal routing. Keep analog and digital return paths separated as far as practical, place bypass capacitors close to the supply pins, and follow the manufacturer datasheet when selecting external filter components. Verify the exact pin assignments and recommended application circuit before PCB release.
드롭인 대체품: PCM1738EG4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PCM1738EG4 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Digital Interface, Maximum Sampling Rate, Package.
PCM1738E/2K
✅ 드롭인가격 문의
데이터시트 보기 →PCM1738E
✅ 드롭인가격 문의
데이터시트 보기 →PCM1738E/2KG4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PCM1738EG4-R
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PCM1738EG4G4
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PCM1738EG4 최대 정격 & 전기적 특성
| Device Type | Stereo audio digital-to-analog converter (DAC) |
| Architecture | Two-channel delta-sigma |
| 분해능 | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Number of Channels | 2 channels |
| Digital Interface | 3-wire serial interface |
| 출력 유형 | Current output |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| 패키지 | 28-SSOP, 0.209 inch (5.30 mm) width |
| 핀 수 | 28 pins |
| 실장 유형 | Surface mount |
| Shipping Configuration | Tape and reel |
| RoHS 상태 | RoHS specialized |
PCM1738EG4 28-ssop, 0.209 inch (5.30 mm) width 핀 구성 가이드
PCM1738EG4(28-ssop, 0.209 inch (5.30 mm) width 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PCM1738EG4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PCM1738EG4 적합 용도: 6 애플리케이션s: High-Resolution Consumer Audio, USB Audio Interface, Active Speaker Network, Digital Mixing Console, Multimedia Playback System, Digital Audio Player.
High-Resolution Consumer Audio
The PCM1738EG4 fits digital audio products that require 24-bit stereo reconstruction at sampling rates up to 192 kHz. Its three-wire serial interface reduces the number of connections required between the DAC and an audio controller, while current output supports the analog reconstruction and output stages described in the manufacturer application guidance. The 28-SSOP package also conserves board area in compact source components, network players, and premium digital audio accessories.
추천
USB Audio Interface
PCM1738EG4 can serve as the stereo output stage of a USB audio interface when the USB controller provides compatible serial audio data, bit clock, and synchronization signals. Its 24-bit resolution and 192 kHz capability align with high-resolution playback formats, while the three-wire interface limits digital routing. Designers should follow the manufacturer timing and filtering recommendations to preserve signal integrity between the digital controller and analog output network.
추천
Active Speaker Network
The PCM1738EG4 is suitable for digital active speakers and amplifier front ends that require a dedicated high-resolution stereo DAC. A digital audio source can feed the serial interface, and the converter’s current-output architecture can be integrated with the recommended analog filter and line-drive circuitry. The 28-SSOP package helps reduce the footprint of multiway speaker electronics while maintaining 24-bit, 192 kHz class playback performance.
추천
Digital Mixing Console
PCM1738EG4 can be used in a digital mixing console for monitor, line, or auxiliary output channels requiring precise stereo conversion. The 192 kHz sampling capability supports high-resolution multichannel workflows, and the serial digital interface allows central audio routing from a mixing processor. In multi-channel equipment, synchronization, grounding, supply isolation, and channel-to-channel matching must be considered as carefully as the analog output filtering.
추천
Multimedia Playback System
PCM1738EG4 suits multimedia and network-audio products that combine a digital audio stream with an analog output stage. Its 24-bit data width and two-channel architecture provide a straightforward path for stereo playback, while the compact SSOP-28 package supports dense consumer electronics layouts. The system designer should select the external analog network and bypass components using the manufacturer’s documented reference configuration.
추천
Digital Audio Player
The PCM1738EG4 is appropriate for network players and digital source components that reconstruct stereo audio for a downstream amplifier. Its support for 192 kHz sampling accommodates high-resolution source material, and its three-wire serial interface simplifies connection to a digital transport or decoding engine. Achieving the intended fidelity requires clean analog and digital supplies, short output traces, and the manufacturer-recommended reconstruction filter.
추천
추천 제품 요약
엔지니어링 참조 데이터: PCM1738EG4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PCM1738E/2K | PCM1738E | PCM1738E/2KG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-28 | SSOP-28 | SSOP-28 | SSOP-28 |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz | 192 kHz |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Architecture | Two-channel delta-sigma | Two-channel delta-sigma | Two-channel delta-sigma | Two-channel delta-sigma |
| Digital Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
| Output Type | Current output | Current output | Current output | Current output |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
주요 차별점
- Matches the core specifications of the same-family ordering alternatives (vs PCM1738E/2K)
- Maintains the same converter architecture and interface class (vs PCM1738E)
- Supports high-resolution stereo conversion in a compact package (vs PCM1738E/2KG4)
설계 노트
Use the manufacturer pin table to assign the SSOP-28 footprint and place the device with the correct package orientation. Route the three-wire serial audio signals as a compact digital group, and keep them away from the current-output and filter components. Place the analog reconstruction network close to the output pins to minimize trace length and susceptibility to coupled noise.
Decouple each supply rail with the capacitance and placement recommended in the manufacturer application circuit. The device is specified for a 4.75 V to 5.25 V supply range, so do not allow transient excursions beyond that range. Keep switching regulators and inductors physically separated from the analog output section, and use a quiet ground strategy for the digital and analog return currents.
Treat clock, serial data, and latch or control signals as a timing-critical digital bus. Use short traces, a continuous reference plane, and termination only when required by the source device and timing topology. Verify setup and hold requirements against the manufacturer interface timing table, especially when the DAC is operated at 192 kHz or connected through long interconnects.
Do not assume that two PCM1738 orderable suffixes are automatically interchangeable. Confirm the exact MPN, tape-and-reel or other shipping option, control functions, pin assignments, and analog output requirements. Also avoid substituting the generic SSOP footprint symbol for the manufacturer drawing, because exposed connectivity and pin numbering determine whether the board is electrically correct.
규정 준수 정보
The component comparison data identifies the PCM1738 family as RoHS specialized. No explicit REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified.