PCM1738EG4 - 24-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1738EG4 ✓ Hoạt độngPCM1738EG4 Tóm tắt
An audio DAC is a data converter that transforms digital audio samples into analog voltage signals suitable for amplification, headphone drive, line output, or further signal conditioning. The PCM1738 belongs to the DAC and audio converter hierarchy within integrated circuits, where precision sample reconstruction and low-noise analog output are central requirements.
Key features of the PCM1738EG4 include 24-bit resolution, stereo operation, support for serial digital audio data, and operation from a 4.75 V to 5.25 V supply range. Its 28-SSOP package, identified as 0.209 inch or 5.30 mm wide in the component listing, supports compact surface-mount layouts. The EG4 suffix denotes the tape-and-reel ordering configuration.
The converter uses a delta-sigma architecture to provide high-resolution digital audio reconstruction. The serial interface reduces the number of interconnects required when the DAC is connected to an audio codec, digital signal processor, USB audio interface, or embedded audio controller. This makes the device suitable for structured multichannel audio systems where channel synchronization and compact implementation are important.
Typical applications include consumer audio equipment, digital mixing consoles, active speakers, multimedia systems, and embedded audio platforms. The 192 kHz sampling-rate capability supports high-resolution audio workflows, while the 24-bit data width provides a 16,777,216-level representation for each digital sample.
The primary design consideration is correct implementation of the digital interface, analog output filtering, power-supply decoupling, and signal routing. Keep analog and digital return paths separated as far as practical, place bypass capacitors close to the supply pins, and follow the manufacturer datasheet when selecting external filter components. Verify the exact pin assignments and recommended application circuit before PCB release.
Bộ thay thế dễ dàng lắp đặt cho PCM1738EG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1738EG4 (cùng hình factor và footprint) — khác nhau ở Architecture, Digital Interface, Maximum Sampling Rate, Package.
PCM1738E/2K
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1738E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1738E/2KG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1738EG4-R
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PCM1738EG4G4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PCM1738EG4 Tỷ lệ tối đa & tính chất điện
| Device Type | Stereo audio digital-to-analog converter (DAC) |
| Architecture | Two-channel delta-sigma |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Number of Channels | 2 channels |
| Digital Interface | 3-wire serial interface |
| Kiểu đầu ra | Current output |
| Analog Supply Voltage | 4.75 V to 5.25 V |
| Hộp | 28-SSOP, 0.209 inch (5.30 mm) width |
| Số chân | 28 pins |
| Kiểu lắp đặt | Surface mount |
| Shipping Configuration | Tape and reel |
| Trạng thái RoHS | RoHS specialized |
Hướng dẫn cấu hình chân PCM1738EG4 28-ssop, 0.209 inch (5.30 mm) width
Cấu hình chân cho PCM1738EG4 (28-ssop, 0.209 inch (5.30 mm) width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1738EG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1738EG4 phù hợp cho 6 Áp dụngs: High-Resolution Consumer Audio, USB Audio Interface, Active Speaker Network, Digital Mixing Console, Multimedia Playback System, Digital Audio Player.
High-Resolution Consumer Audio
The PCM1738EG4 fits digital audio products that require 24-bit stereo reconstruction at sampling rates up to 192 kHz. Its three-wire serial interface reduces the number of connections required between the DAC and an audio controller, while current output supports the analog reconstruction and output stages described in the manufacturer application guidance. The 28-SSOP package also conserves board area in compact source components, network players, and premium digital audio accessories.
Được đề xuất
USB Audio Interface
PCM1738EG4 can serve as the stereo output stage of a USB audio interface when the USB controller provides compatible serial audio data, bit clock, and synchronization signals. Its 24-bit resolution and 192 kHz capability align with high-resolution playback formats, while the three-wire interface limits digital routing. Designers should follow the manufacturer timing and filtering recommendations to preserve signal integrity between the digital controller and analog output network.
Được đề xuất
Active Speaker Network
The PCM1738EG4 is suitable for digital active speakers and amplifier front ends that require a dedicated high-resolution stereo DAC. A digital audio source can feed the serial interface, and the converter’s current-output architecture can be integrated with the recommended analog filter and line-drive circuitry. The 28-SSOP package helps reduce the footprint of multiway speaker electronics while maintaining 24-bit, 192 kHz class playback performance.
Được đề xuất
Digital Mixing Console
PCM1738EG4 can be used in a digital mixing console for monitor, line, or auxiliary output channels requiring precise stereo conversion. The 192 kHz sampling capability supports high-resolution multichannel workflows, and the serial digital interface allows central audio routing from a mixing processor. In multi-channel equipment, synchronization, grounding, supply isolation, and channel-to-channel matching must be considered as carefully as the analog output filtering.
Được đề xuất
Multimedia Playback System
PCM1738EG4 suits multimedia and network-audio products that combine a digital audio stream with an analog output stage. Its 24-bit data width and two-channel architecture provide a straightforward path for stereo playback, while the compact SSOP-28 package supports dense consumer electronics layouts. The system designer should select the external analog network and bypass components using the manufacturer’s documented reference configuration.
Được đề xuất
Digital Audio Player
The PCM1738EG4 is appropriate for network players and digital source components that reconstruct stereo audio for a downstream amplifier. Its support for 192 kHz sampling accommodates high-resolution source material, and its three-wire serial interface simplifies connection to a digital transport or decoding engine. Achieving the intended fidelity requires clean analog and digital supplies, short output traces, and the manufacturer-recommended reconstruction filter.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1738EG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1738E/2K | PCM1738E | PCM1738E/2KG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-28 | SSOP-28 | SSOP-28 | SSOP-28 |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz | 192 kHz |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Architecture | Two-channel delta-sigma | Two-channel delta-sigma | Two-channel delta-sigma | Two-channel delta-sigma |
| Digital Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
| Output Type | Current output | Current output | Current output | Current output |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
Bảo phân biệt quan trọng
- Matches the core specifications of the same-family ordering alternatives (vsPCM1738E/2K)
- Maintains the same converter architecture and interface class (vsPCM1738E)
- Supports high-resolution stereo conversion in a compact package (vsPCM1738E/2KG4)
Ghi chú thiết kế
Use the manufacturer pin table to assign the SSOP-28 footprint and place the device with the correct package orientation. Route the three-wire serial audio signals as a compact digital group, and keep them away from the current-output and filter components. Place the analog reconstruction network close to the output pins to minimize trace length and susceptibility to coupled noise.
Decouple each supply rail with the capacitance and placement recommended in the manufacturer application circuit. The device is specified for a 4.75 V to 5.25 V supply range, so do not allow transient excursions beyond that range. Keep switching regulators and inductors physically separated from the analog output section, and use a quiet ground strategy for the digital and analog return currents.
Treat clock, serial data, and latch or control signals as a timing-critical digital bus. Use short traces, a continuous reference plane, and termination only when required by the source device and timing topology. Verify setup and hold requirements against the manufacturer interface timing table, especially when the DAC is operated at 192 kHz or connected through long interconnects.
Do not assume that two PCM1738 orderable suffixes are automatically interchangeable. Confirm the exact MPN, tape-and-reel or other shipping option, control functions, pin assignments, and analog output requirements. Also avoid substituting the generic SSOP footprint symbol for the manufacturer drawing, because exposed connectivity and pin numbering determine whether the board is electrically correct.
Thông tin tuân thủ
The component comparison data identifies the PCM1738 family as RoHS specialized. No explicit REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified.