Texas Instruments

PCM1738EG4 - 24-Bit Stereo Audio DAC | Texas Instruments

MPN: PCM1738EG4 ✓ فعال
4.75 V to 5.25 V Vdss 28-SSOP, 0.209 inch (5.30 mm) width Package
MOQ: 1 |

PCM1738EG4 جائزہ

The Texas Instruments PCM1738EG4 is a 24-bit stereo audio digital-to-analog converter DAC with a sampling rate of up to 192 kHz, housed in a 28-pin SSOP package. The device uses a two-channel delta-sigma architecture and a serial three-wire digital audio interface for compact audio signal-processing designs.

An audio DAC is a data converter that transforms digital audio samples into analog voltage signals suitable for amplification, headphone drive, line output, or further signal conditioning. The PCM1738 belongs to the DAC and audio converter hierarchy within integrated circuits, where precision sample reconstruction and low-noise analog output are central requirements.

Key features of the PCM1738EG4 include 24-bit resolution, stereo operation, support for serial digital audio data, and operation from a 4.75 V to 5.25 V supply range. Its 28-SSOP package, identified as 0.209 inch or 5.30 mm wide in the component listing, supports compact surface-mount layouts. The EG4 suffix denotes the tape-and-reel ordering configuration.

The converter uses a delta-sigma architecture to provide high-resolution digital audio reconstruction. The serial interface reduces the number of interconnects required when the DAC is connected to an audio codec, digital signal processor, USB audio interface, or embedded audio controller. This makes the device suitable for structured multichannel audio systems where channel synchronization and compact implementation are important.

Typical applications include consumer audio equipment, digital mixing consoles, active speakers, multimedia systems, and embedded audio platforms. The 192 kHz sampling-rate capability supports high-resolution audio workflows, while the 24-bit data width provides a 16,777,216-level representation for each digital sample.

The primary design consideration is correct implementation of the digital interface, analog output filtering, power-supply decoupling, and signal routing. Keep analog and digital return paths separated as far as practical, place bypass capacitors close to the supply pins, and follow the manufacturer datasheet when selecting external filter components. Verify the exact pin assignments and recommended application circuit before PCB release.

کے لیے ڈراپ اِن متبادل PCM1738EG4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PCM1738EG4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Architecture, Digital Interface, Maximum Sampling Rate, Package.

Texas Instruments
Architecture: Advanced segment DAC architecture
Digital Interface: I2S
Maximum Sampling Rate: 200 kHz
موازنہ کریں PCM1738EG4 →

PCM1738E/2K

✅ ڈراپ-اِن
Texas Instruments
📦 SSOP-28
Stereo digital-to-analog converter · 24 bit · 192 kHz maximum · 117 dB · Advanced-segment delta-sigma architecture · Balanced current output · Serial 3-wire I2S interface · 2 channels

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PCM1738E

✅ ڈراپ-اِن
Texas Instruments
📦 SSOP-28
Stereo audio digital-to-analog converter (DAC) · 2 channels · 24 bit · 200 kHz · 192 kHz · Advanced segment DAC architecture · 4.75 V to 5.25 V · Balanced current outputs

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PCM1738E/2KG4

✅ ڈراپ-اِن
📦 SSOP-28
Same 24-bit, 192 kHz stereo DAC ratings and SSOP-28 package; the orderable suffix differs and may change packing, with 0% difference in the principal numerical ratings.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PCM1738EG4-R

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 SSOP-28
Same PCM1738EG4 converter and SSOP-28 footprint, with a tape-and-reel ordering suffix; the principal numerical ratings differ by 0%.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PCM1738EG4G4

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 SSOP-28
Same PCM1738EG4 converter in the SSOP-28 package, differing in the ordering suffix; resolution and sampling-rate ratings differ by 0%.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PCM1738EG4 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type Stereo audio digital-to-analog converter (DAC)
Architecture Two-channel delta-sigma
ریزولوشن 24 bit
Maximum Sampling Rate 192 kHz
Number of Channels 2 channels
Digital Interface 3-wire serial interface
آؤٹ پٹ کی قسم Current output
Analog Supply Voltage 4.75 V to 5.25 V
پیکیج 28-SSOP, 0.209 inch (5.30 mm) width
پن کی تعداد 28 pins
ماؤنٹنگ ٹائپ Surface mount
Shipping Configuration Tape and reel
RoHS اسٹیٹس RoHS specialized

PCM1738EG4 28-ssop, 0.209 inch (5.30 mm) width پن کنفیگریشن گائیڈ

PCM1738EG4 (28-ssop, 0.209 inch (5.30 mm) width پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

PCM1738EG4 کے لیے 28-ssop, 0.209 inch (5.30 mm) width پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PCM1738EG4.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

PCM1738EG4 کے لیے موزوں ہے 6 ایپلیکیشنs: High-Resolution Consumer Audio, USB Audio Interface, Active Speaker Network, Digital Mixing Console, Multimedia Playback System, Digital Audio Player.

🎧

High-Resolution Consumer Audio

The PCM1738EG4 fits digital audio products that require 24-bit stereo reconstruction at sampling rates up to 192 kHz. Its three-wire serial interface reduces the number of connections required between the DAC and an audio controller, while current output supports the analog reconstruction and output stages described in the manufacturer application guidance. The 28-SSOP package also conserves board area in compact source components, network players, and premium digital audio accessories.

🔧

USB Audio Interface

PCM1738EG4 can serve as the stereo output stage of a USB audio interface when the USB controller provides compatible serial audio data, bit clock, and synchronization signals. Its 24-bit resolution and 192 kHz capability align with high-resolution playback formats, while the three-wire interface limits digital routing. Designers should follow the manufacturer timing and filtering recommendations to preserve signal integrity between the digital controller and analog output network.

🎧

Active Speaker Network

The PCM1738EG4 is suitable for digital active speakers and amplifier front ends that require a dedicated high-resolution stereo DAC. A digital audio source can feed the serial interface, and the converter’s current-output architecture can be integrated with the recommended analog filter and line-drive circuitry. The 28-SSOP package helps reduce the footprint of multiway speaker electronics while maintaining 24-bit, 192 kHz class playback performance.

🎚️

Digital Mixing Console

PCM1738EG4 can be used in a digital mixing console for monitor, line, or auxiliary output channels requiring precise stereo conversion. The 192 kHz sampling capability supports high-resolution multichannel workflows, and the serial digital interface allows central audio routing from a mixing processor. In multi-channel equipment, synchronization, grounding, supply isolation, and channel-to-channel matching must be considered as carefully as the analog output filtering.

📱

Multimedia Playback System

PCM1738EG4 suits multimedia and network-audio products that combine a digital audio stream with an analog output stage. Its 24-bit data width and two-channel architecture provide a straightforward path for stereo playback, while the compact SSOP-28 package supports dense consumer electronics layouts. The system designer should select the external analog network and bypass components using the manufacturer’s documented reference configuration.

🔊

Digital Audio Player

The PCM1738EG4 is appropriate for network players and digital source components that reconstruct stereo audio for a downstream amplifier. Its support for 192 kHz sampling accommodates high-resolution source material, and its three-wire serial interface simplifies connection to a digital transport or decoding engine. Achieving the intended fidelity requires clean analog and digital supplies, short output traces, and the manufacturer-recommended reconstruction filter.

تجویز کردہ پروڈکٹس کا خلاصہ

PCM1738E/2K Texas Instruments استعمال ہوتا ہے: High-Resolution Consumer Audio, Active Speaker Network, Digital Audio Player PCM1738E Texas Instruments استعمال ہوتا ہے: High-Resolution Consumer Audio, Active Speaker Network PCM1738E/2KG4 Same-family 24-bit stereo DAC option استعمال ہوتا ہے: USB Audio Interface, Multimedia Playback System PCM1738EG4-R Same PCM1738EG4 ordering configuration استعمال ہوتا ہے: Digital Mixing Console
What is the PCM1738EG4?
The PCM1738EG4 is a Texas Instruments two-channel, 24-bit stereo audio DAC based on a delta-sigma architecture. It supports digital audio sampling rates up to 192 kHz and uses a three-wire serial interface. According to the manufacturer datasheet, the device is intended for high-resolution stereo audio reconstruction in a 28-SSOP surface-mount package.
What are the key specifications of PCM1738EG4 that engineers should know?
The PCM1738EG4 provides 24-bit resolution, two stereo channels, a maximum sampling rate of 192 kHz, a current output, and a three-wire serial digital interface. Its listed operating supply range is 4.75 V to 5.25 V, and it is packaged in a 28-pin SSOP. According to the manufacturer datasheet, these characteristics position it for compact, high-resolution consumer and professional audio equipment.
Where can I download the PCM1738EG4 datasheet PDF?
The PCM1738EG4 datasheet PDF can be accessed through the datasheet listing provided on this page. According to the manufacturer datasheet, it contains the electrical characteristics, pin descriptions, digital interface timing, analog output information, and application details needed for circuit design. Use that document to confirm the final pin assignments and external filtering values before releasing the PCB.
Where can I find the PCM1738EG4 pinout?
The PCM1738EG4 pinout is shown in the pin-description and application information in the manufacturer datasheet. The device uses a 28-SSOP package with a 0.209 inch, or 5.30 mm, body width. Assign PCB nets from the official pin table rather than from a generic SSOP drawing, because supply, ground, clock, data, and analog output functions must follow the exact package orientation.
How does PCM1738EG4 compare with PCM1738E/2K?
PCM1738EG4 and PCM1738E/2K are members of the same Texas Instruments PCM1738 stereo DAC family and share the basic 24-bit, 192 kHz conversion capability. Their ordering suffixes distinguish packaging or ordering options rather than a change in the fundamental converter resolution. According to the manufacturer datasheet and comparison listings, the EG4 version is supplied in a tape-and-reel configuration.
What is the difference between PCM1738EG4 and PCM1738E?
The PCM1738EG4 and PCM1738E use the same 28-SSOP stereo DAC platform, with 24-bit resolution and a sampling capability listed at 192 kHz. The primary visible ordering distinction is the EG4 tape-and-reel configuration. For an exact replacement decision, engineers should compare the complete ordering suffix and verify the production datasheet because package marking alone does not describe all procurement options.
When should I choose PCM1738EG4 over PCM1738E/2K?
Choose PCM1738EG4 when the required ordering configuration is tape and reel and the design uses a 28-SSOP stereo DAC with 24-bit resolution and a three-wire serial interface. PCM1738E/2K may be preferable when its listed ordering option matches the assembly process. Both belong to the PCM1738 family, so the decisive checks are the exact suffix, supply configuration, pin mapping, and expected production status.
Is PCM1738EG4 suitable for USB and embedded audio designs?
PCM1738EG4 is suitable when an embedded controller or USB audio interface can provide the required serial data, clock, and control signals. Its three-wire serial interface reduces connection count, while 24-bit resolution supports high-fidelity playback. The manufacturer datasheet should guide clocking, de-emphasis, mute, and filter configuration because the converter also requires an external analog reconstruction network.
What is the best drop-in replacement for PCM1738EG4?
The closest same-family drop-in candidates are PCM1738E/2K, PCM1738E, and PCM1738E/2KG4 because they use the 28-SSOP PCM1738 platform with matching 24-bit stereo conversion characteristics. Before replacing PCM1738EG4, verify the exact suffix, packaging form, pin assignments, control functions, and analog filter requirements against the manufacturer datasheet.
Can PCM1738E/2K replace PCM1738EG4?
PCM1738E/2K can be a candidate replacement for PCM1738EG4 because both are associated with the 28-SSOP PCM1738 family and share the principal 24-bit, 192 kHz stereo DAC specifications. Confirmation requires checking the exact orderable part number, supply and packaging configuration, and every pin function in the manufacturer datasheet before treating it as a drop-in substitution.
What can replace PCM1738EG4 without changing the SSOP-28 layout?
PCM1738E/2K, PCM1738E, and PCM1738E/2KG4 are the supported SSOP-28 replacement candidates identified for the PCM1738 family. They retain the same basic converter architecture, channel count, resolution, and sampling-rate class. A valid drop-in decision also requires matching the control interface, power configuration, analog output implementation, and package pin mapping.
Is PCM1738EG4 the same as PCM1738E/2KG4?
PCM1738EG4 and PCM1738E/2KG4 are closely related Texas Instruments PCM1738 stereo DAC variants, but they are not identical orderable MPNs. Both are associated with the 28-SSOP family and the same principal 24-bit, 192 kHz conversion class. According to the manufacturer ordering information, suffix differences determine the exact device configuration and must be checked before substitution.
What is the best Texas Instruments equivalent for PCM1738EG4?
The best same-manufacturer equivalent is the PCM1738E/2K family variant when its exact suffix and production configuration meet the design requirements. PCM1738E and PCM1738E/2KG4 are also close same-family alternatives. According to the manufacturer datasheet, all retain the core 28-SSOP stereo DAC architecture, allowing evaluation without changing to a different converter package.
Where can I buy PCM1738EG4 and what is its price?
PCM1738EG4 can be requested through the “Request a Quote” form on this page. The form is the appropriate channel for current commercial terms, availability, and lead time, which can vary by order quantity and production status. Submit the exact MPN, requested quantity, target date, and packaging requirement to receive a current quotation.
What is the lead time for PCM1738EG4?
The current lead time for PCM1738EG4 should be confirmed through the “Request a Quote” form on this page. Lead time can depend on order quantity, allocation status, and the requested shipping schedule. Include the exact MPN, forecast quantities, and required delivery date so the commercial response reflects the intended production schedule.
Is PCM1738EG4 in stock?
Current PCM1738EG4 inventory status should be confirmed through the “Request a Quote” form on this page. Because stock levels can change rapidly and production allocations may vary by quantity, use the form for an up-to-date availability response. Include your required order quantity, reel or other packing preference, and target delivery date.

کے لیے انجینئرنگ ریفرنس ڈیٹا PCM1738EG4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose PCM1738EG4 for a 28-SSOP design that requires a 24-bit, 192 kHz stereo DAC with a three-wire serial interface and current output. PCM1738E/2K is the closest same-family alternative when its exact ordering configuration better matches procurement or assembly. PCM1738E can be considered when the non-G4 ordering suffix is acceptable and its complete orderable part number is confirmed. PCM1738E/2KG4 is another same-family choice, but suffix and packing must be checked rather than inferred. For all candidates, compare the production datasheet for exact pin functions, control modes, external filter values, operating-temperature limits, and lifecycle status. Avoid selecting a converter solely by resolution and package: clocking, synchronization, analog topology, supply requirements, and filtering must also match the target board.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PCM1738E/2K PCM1738E PCM1738E/2KG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SSOP-28 SSOP-28 SSOP-28 SSOP-28
Resolution 24 bit 24 bit 24 bit 24 bit
Maximum Sampling Rate 192 kHz 192 kHz 192 kHz 192 kHz
Number of Channels 2 channels 2 channels 2 channels 2 channels
Architecture Two-channel delta-sigma Two-channel delta-sigma Two-channel delta-sigma Two-channel delta-sigma
Digital Interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
Output Type Current output Current output Current output Current output
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V

اہم امتیازی خصوصیات

  • Matches the core specifications of the same-family ordering alternatives (بمقابلہPCM1738E/2K)
  • Maintains the same converter architecture and interface class (بمقابلہPCM1738E)
  • Supports high-resolution stereo conversion in a compact package (بمقابلہPCM1738E/2KG4)

ڈیزائن نوٹس

Use the manufacturer pin table to assign the SSOP-28 footprint and place the device with the correct package orientation. Route the three-wire serial audio signals as a compact digital group, and keep them away from the current-output and filter components. Place the analog reconstruction network close to the output pins to minimize trace length and susceptibility to coupled noise.

Decouple each supply rail with the capacitance and placement recommended in the manufacturer application circuit. The device is specified for a 4.75 V to 5.25 V supply range, so do not allow transient excursions beyond that range. Keep switching regulators and inductors physically separated from the analog output section, and use a quiet ground strategy for the digital and analog return currents.

Treat clock, serial data, and latch or control signals as a timing-critical digital bus. Use short traces, a continuous reference plane, and termination only when required by the source device and timing topology. Verify setup and hold requirements against the manufacturer interface timing table, especially when the DAC is operated at 192 kHz or connected through long interconnects.

Do not assume that two PCM1738 orderable suffixes are automatically interchangeable. Confirm the exact MPN, tape-and-reel or other shipping option, control functions, pin assignments, and analog output requirements. Also avoid substituting the generic SSOP footprint symbol for the manufacturer drawing, because exposed connectivity and pin numbering determine whether the board is electrically correct.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The component comparison data identifies the PCM1738 family as RoHS specialized. No explicit REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

PCM1738EG4 datasheet PCM1738EG4 pinout PCM1738EG4 datasheet pdf PCM1738EG4 equivalent PCM1738EG4 replacement PCM1738EG4 cross reference PCM1738EG4 vs PCM1738E PCM1738EG4 SSOP-28 pinout PCM1738EG4 price PCM1738EG4 stock Texas Instruments PCM1738EG4 PCM1738EG4 application circuit

متعلقہ اجزاء اور اصطلاحات

Texas Instruments PCM1738EG4 PCM1738E/2K PCM1738E PCM1738E/2KG4 digital-to-analog converter DAC audio DAC stereo DAC delta-sigma converter 24-bit audio 192 kHz sampling current output three-wire serial interface SSOP-28 surface-mount package analog reconstruction filter USB audio interface digital mixing console active speaker digital audio player RoHS power management integrated circuit
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں