PI7C9X9208SLFDE - 8-Ch Video Decoder Bridge | Diodes
부품 번호: PI7C9X9208SLFDE ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
PI7C9X9208SLFDE 개요
A video decoder bridge is an interface IC that receives digital video streams and associated audio or control data, converts or routes those streams into a system-facing interface, and helps bridge legacy display or multimedia paths to PCIe-based host systems. In the product hierarchy, this component belongs to video processing and interface ICs, with PCIe connectivity as its host-facing transport. It is intended for systems requiring eight-channel video/audio decoding rather than a general-purpose display controller.
The PI7C9X9208SLFDE is specifically associated with PCIe eight-channel video/audio decoder functionality. Its LFDE ordering suffix is supplied exactly as shown by the verified distributor records, while the package evidence identifies a 128-pin LQFP. The supplied sources do not state whether the part is currently active, whether it is obsolete, or whether a particular lifecycle designation applies. It also does not provide verified pricing, stock, lead time, or a complete set of electrical limits.
Typical design use is an embedded video system, digital signage controller, video capture appliance, or PCIe expansion card where multiple decoded video/audio channels must be transferred through a PCIe interface. The decoder should be validated against the host PCIe topology, display timing, audio routing, reference clock, and board-level signal-integrity requirements. Because the verified data does not specify those details, engineers should consult the manufacturer datasheet before finalizing clocking, lane configuration, termination, or firmware assumptions.
The most important design consideration is to avoid treating distributor search snippets as a substitute for the complete datasheet. In particular, verify the supported input formats, output interface, electrical timing, reset requirements, power rails, package drawing, exposed-pad treatment, and absolute maximum ratings. PCB layout should preserve high-speed signal return paths and provide the required decoupling and grounding according to the complete manufacturer documentation.
This page consolidates verified distributor identity, package information, sourcing links, and the available cross-reference context. It intentionally distinguishes confirmed facts from unavailable specifications rather than filling engineering gaps with assumptions.
드롭인 대체품: PI7C9X9208SLFDE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청PI7C9X9208SLFDE 최대 정격 & 전기적 특성
| Product Type | PCIe eight-channel video/audio decoder bridge IC |
| Manufacturer | Diodes Incorporated |
| Host Interface | PCIe |
| Video Channel Count | 8 channels |
| Package Type | 128-LQFP |
| Package Dimensions | 14 mm x 14 mm |
| Package Family | LQFP surface-mount package |
| 실장 유형 | Surface mount |
| 핀 수 | 128 pins |
| RoHS 상태 | Compliant according to the IC Components Limited distributor listing |
PI7C9X9208SLFDE lqfp surface-mount package 핀 구성 가이드
PI7C9X9208SLFDE(lqfp surface-mount package 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: PI7C9X9208SLFDE.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PI7C9X9208SLFDE 적합 용도: 7 애플리케이션s: PCIe Video Capture Card, Industrial Machine Vision, Digital Signage Controller, Broadcast Monitoring Equipment, Video Test and Measurement, PCIe Expansion System, Medical Imaging Acquisition.
PCIe Video Capture Card
The PI7C9X9208SLFDE fits a PCIe capture architecture that must handle eight video or video/audio decoding channels near the host interface. Its verified identity as an eight-channel PCIe video/audio decoder makes it relevant to multi-camera, industrial inspection, broadcast, and test systems, but the exact input formats and host lane configuration are not supplied. The design must confirm clocking, channel multiplexing, PCIe reference requirements, power rails, and signal integrity against the full datasheet before PCB release.
추천
Industrial Machine Vision
An eight-channel video decoder bridge can be useful in industrial machine-vision equipment that receives multiple synchronized video streams from cameras or sensors. The verified distributor description supports the channel-count positioning, while unresolved details include supported resolutions, frame rates, sync architecture, and PCIe endpoint behavior. Engineers should treat the part as a candidate only after checking signal timing, reference-clock requirements, thermal exposure, and deterministic channel latency in the complete manufacturer documentation.
추천
Digital Signage Controller
PI7C9X9208SLFDE may be considered for a digital-signage controller that receives multiple decoded video/audio streams and transfers them toward a PCIe-based processing engine. The verified evidence does not specify supported display formats, audio interfaces, scaling, color depth, or synchronization, so those features cannot be assumed. A practical design must compare the source and destination timing, validate PCIe lane requirements, and provide clean power and return paths for high-speed signals.
추천
Broadcast Monitoring Equipment
A multi-channel decoding bridge can support broadcast-monitoring equipment that needs to ingest several video/audio streams for analysis, recording, or display. The verified target listing establishes eight-channel PCIe decoding but does not provide standards coverage, resolution limits, latency, or audio synchronization specifications. Use the device only after confirming those requirements, especially if the system depends on deterministic timing or multiple channels that must be locked together.
추천
Video Test and Measurement
The eight-channel decoder function can be relevant in video test equipment used to bring multiple streams into a measurement or analysis system. The supplied sources do not identify test-pattern support, loopback behavior, timing tolerances, or electrical input ranges, so those capabilities must be verified before selecting the IC. A practical implementation should reserve controlled clocks, robust grounding, and accessible test points while keeping sensitive high-speed routes short and properly referenced.
추천
PCIe Expansion System
The PI7C9X9208SLFDE can be evaluated as the video-facing element of a PCIe expansion system in which decoded channels must reach a host processor or another digital subsystem. Its confirmed package identity makes board-level sourcing easier, but missing power, clock, pin, and timing data prevent a definitive architecture recommendation. Confirm host lane width, connector requirements, reference-clock distribution, reset sequencing, and signal-loss tolerances in the manufacturer documentation.
추천
Medical Imaging Acquisition
Multi-channel video decoding may be considered in specialized medical-imaging acquisition systems, but the supplied data does not establish medical qualification, image-format support, latency guarantees, or isolation requirements. PI7C9X9208SLFDE should therefore be treated only as a candidate interface IC for non-safety-critical acquisition research until its complete specifications are reviewed. Any medical use requires separate system-level risk, electrical-safety, privacy, and validation work beyond this component listing.
추천
추천 제품 요약
엔지니어링 참조 데이터: PI7C9X9208SLFDE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 128-LQFP |
| Brand | Diodes Incorporated |
| Function | PCIe eight-channel video/audio decoder bridge |
| Host Interface | PCIe |
| Video Channels | 8 channels |
| Package Size | 14 mm x 14 mm |
주요 차별점
- Eight-channel decoding position (vs PI7C9X2G404SVAFDEEX)
- PCIe-specific positioning (vs PI7C9X2G404SVAFDEEX)
- Documented package association (vs PI7C9X2G404SVAFDEEX)
설계 노트
The available evidence confirms PCIe video/audio decoding and a 128-LQFP package, but it does not provide pin-level signal definitions or timing tables. Before routing, obtain the manufacturer pinout and identify every high-speed differential or single-ended path. Keep traces short where the interface allows, provide continuous return paths, and keep connector, clock, and decoder interfaces away from noisy switching nodes.
Power-rail values and current consumption are not present in the verified data, so no capacitor value or thermal estimate should be inferred from the distributor descriptions. After obtaining the datasheet, calculate the worst-case supply dissipation using the actual rail voltages and load currents, then place the specified decoupling capacitors directly at the relevant power pins and preserve adequate ground-plane continuity.
The most consequential mistake is treating the target as a generic video decoder or assuming that a similar PCIe bridge is interchangeable. The exact supported video formats, audio path, clocking, reset behavior, configuration method, electrical limits, and lifecycle status are not supplied. Require a complete datasheet and a written cross-reference check before schematic, firmware, or PCB sign-off.
규정 준수 정보
The IC Components Limited listing identifies the part as RoHS compliant. The supplied data does not verify REACH, lead-free status, halogen-free status, conflict-minerals status, or automotive qualification.
