Microchip Technology

PIC16LC717T-I/SO - 8-Bit 20MHz 3.5KB OTP MCU | Microchip

부품 번호: PIC16LC717T-I/SO ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
2.5 V to 5.5 V Vdss 18-pin SOIC (SO), Tape & Reel Package 20 MHz Speed 3.5 KB (2K x 14) OTP Memory
시작가 $1.72 USD / 개
MOQ: 1 |
가격 업데이트: 2026-09-22
볼륨 가격
수량 단가 합계
1 $2.95 $2.95
10 $2.66 $26.60
100 $2.21 $221.00
500 $1.95 $975.00
1,000 $1.72 $1,720.00
ℹ️ 모든 가격은 USD 기준입니다

PIC16LC717T-I/SO 개요

The Microchip Technology PIC16LC717T-I/SO is an 8-bit PIC16C-family RISC microcontroller running at up to 20 MHz, integrating 3.5 KB (2K x 14) of One-Time Programmable (OTP) program memory with 256 bytes of RAM in an 18-pin SOIC surface-mount package supplied on tape and reel. The "LC" prefix indicates the low-voltage CMOS process variant, supporting operation across 2.5 V to 5.5 V input, while the "I" suffix denotes the industrial temperature grade of -40 °C to +85 °C. Peripherals include a multi-channel 10-bit ADC, two 8-bit timers and one 16-bit timer, an internal oscillator option, plus Master/Slave I²C and SPI serial interfaces with 16 digital I/O pins.

What is a PIC microcontroller? A PIC (Peripheral Interface Controller) is a family of low-cost, Harvard-architecture RISC microcontrollers originally designed by General Instrument and today best known through Microchip's PIC10/12/16/18/24/32 families. PIC MCUs sit inside the broader taxonomy: microcontroller -> embedded microcontroller -> embedded IC -> semiconductor. PIC16 devices are the legacy 14-bit instruction word mid-range parts, widely adopted in cost-sensitive industrial, appliance and consumer products because they pair predictable interrupt latency with an extensive peripheral set and a mature MPLAB toolchain.

Key features of the PIC16LC717 family include the 35 instruction set, 8-level hardware stack, 256-byte RAM, 3.5 KB OTP program memory, the brown-out reset (BOR) and watchdog timer (WDT), and an internal oscillator eliminating the external crystal in many designs. The wide 2.5 V – 5.5 V supply range lets designers power the same MCU from a single Li-ion cell, three alkaline cells, or a regulated 5 V rail. Compared with the PIC16F717, the OTP "LC" variant reduces die cost in high-volume applications where firmware will not change after release.

Architecturally, the device uses a 14-bit instruction word, single-cycle ALU, and separate program/data buses, achieving close to 5 MIPS at 20 MHz. The 10-bit ADC with multiple input channels supports up to 6 analog inputs (package-dependent), and the CCP/ECCP modules provide PWM generation for motor, lighting or power-conversion control loops. In-system serial programming (ICSP) allows code updates through two pins even after PCB assembly.

Typical applications include industrial control panels, white-goods user interfaces, HVAC damper and valve controllers, low-end motor control, sensor signal conditioning, and any battery-powered or 5 V embedded product requiring deterministic real-time response. When designing with this MCU, plan the analog and digital supply layout carefully: AVSS and AGND should share a low-impedance connection, and the ICSP/CLK-DAT pins must remain accessible for production programming. The OTP nature of the part means firmware revisions require a new part, so mature, locked firmware is essential before high-volume ramp.

This page synthesizes distributor pricing, drop-in 18-SOIC alternatives, and practical design notes that are not found in the bare Microchip datasheet, giving procurement and embedded engineers a single reference for the PIC16LC717T-I/SO.

드롭인 대체품: PIC16LC717T-I/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC16LC717T-I/SO (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, Operating Temperature, Timers.

Microchip Technology
Package: 18-SOIC (0.295", 7.50mm width)
ADC: 6 channels x 10-bit
Core Architecture: PIC® 8-bit RISC (Harvard)
Microchip Technology
Package: 20-pin SSOP (5.30 mm body)
Core Architecture: PIC16 RISC (Harvard)
Operating Temperature: -40C to +125C (Extended, -E suffix)
Microchip Technology
Package: 18-pin SOIC (0.300 inch / 7.50 mm body width)
ADC: 8-channel, 10-bit
Core Architecture: PIC16C RISC (mid-range, 14-bit instruction word)
Microchip Technology
Package: 18-SOIC (0.295 in / 7.50 mm width)
ADC: 10-bit, 6 channels
Core Architecture: 8-bit PIC RISC (Harvard)
Microchip Technology
Package: 20-SSOP (Shrink Small-Outline Package)
Core Architecture: PIC 8-bit (PIC16C family, mid-range)
Timers: One 8-bit, one 16-bit with CCP
Microchip Technology
Package: 18-pin SOIC (SO, 300-mil)
Core Architecture: PIC 8-bit RISC
Timers: 1x 16-bit + 1x 8-bit Timer/Counter
Microchip Technology
Package: 28-pin SSOP (208 mil, shrink small outline)
ADC: 8-bit, 5-channel
Core Architecture: PIC16 (8-bit RISC, 14-bit instruction word)
Microchip Technology
Package: 20-SOIC (0.295" / 7.50 mm width)
ADC: 12-bit, multi-channel
Operating Temperature: -40C to +85C (Industrial, -I)
Microchip Technology
Package: 20-pin SOIC (SO)
ADC: 12-bit, up to 6 channels
Core Architecture: 8-bit PIC RISC (Harvard)
Microchip Technology
Package: 20-pin SSOP (5.30 mm body width)
Microchip Technology
Package: 44-PLCC (J-Lead), 16.59 x 16.59 mm
Microchip Technology
Package: 20-SOIC (0.295, 7.50mm width)
ADC: 8-bit, 8 channels
Operating Temperature: -40C to +85C (Industrial)

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC16LC717-I/SO

✅ 드롭인
Microchip Technology
📦 18-SOIC
PIC16C RISC (mid-range, 14-bit instruction word) · 8-bit · 20 MHz · 3.5 KB (2K x 14) OTP · 256 bytes · 16 · 2.5 V to 5.5 V · -40 C to +85 C (Industrial)

✓ 재고 있음

$2.85 / 개

데이터시트 보기 →

PIC16LC717T/SO

✅ 드롭인
Microchip Technology
📦 18-SOIC
PIC 8-bit RISC · OTP · 3.5 KB (2K x 14) · 256 bytes · None (no on-chip EEPROM) · 20 MHz · 200 ns (at 20 MHz) · 16

✓ 재고 있음

$1.24 / 개

데이터시트 보기 →

PIC16LC717T-E/SO

✅ 드롭인
Microchip Technology
📦 18-SOIC
8-bit PIC RISC (Harvard) · PIC16C / PIC16LC low-voltage CMOS · 3.5 KB (2K x 14) OTP · 256 bytes · Not present (OTP device) · 20 MHz · 2.5 V to 5.5 V

✓ 재고 있음

$2.55 / 개

데이터시트 보기 →

PIC16LC717T-I/SS

✅ 드롭인
Microchip Technology
📦 20-SSOP
PIC 8-bit (PIC16C family, mid-range) · OTP (One-Time Programmable) · 3.5 KB (2K x 14 words) · 256 bytes · 20 MHz · 2.5 V to 5.5 V · 16 · 10-bit

✓ 재고 있음

$3.32 / 개

데이터시트 보기 →

PIC16LC717-E/SO

✅ 드롭인
Microchip Technology
📦 18-SOIC
PIC® 8-bit RISC (Harvard) · OTP (One-Time Programmable) · 3.5KB (2K x 14) · 256 bytes · 0 bytes (no on-chip EEPROM) · 20 MHz · 200 ns · 35 single-word instructions

✓ 재고 있음

$1.94 / 개

데이터시트 보기 →

PIC16LC717-E/SS

✅ 드롭인
Microchip Technology
📦 20-SSOP
PIC16 RISC (Harvard) · 8 bit · 20 MHz · 200 ns · 3.5 KB (2K x 14) OTP · 256 bytes · None (OTP program memory only) · 16

✓ 재고 있음

$4.1 / 개

데이터시트 보기 →

PIC16LC717T-I/SO 최대 정격 & 전기적 특성

Core PIC16C RISC 8-bit
Maximum CPU Frequency 20 MHz
Program Memory 3.5 KB (2K x 14) OTP
Data RAM 256 B
공급 전압 2.5 V to 5.5 V
동작 온도 -40 °C to +85 °C (Industrial)
Number of I/O Pins 16
ADC 10-bit, up to 6 channels
Timers 2 x 8-bit, 1 x 16-bit
Serial Interfaces I²C (Master/Slave), SPI
Brown-out Reset (BOR) Yes
Watchdog Timer (WDT) Yes
Internal Oscillator Yes
In-Circuit Serial Programming Yes (ICSP)
패키지 18-pin SOIC (SO), Tape & Reel
실장 유형 Surface Mount
RoHS 상태 Compliant

PIC16LC717T-I/SO 핀 구성

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
핀 1 MCLR/VPP — Master Clear (reset) input / ICSP programming voltage
핀 2 RA0/AN0 — Port A bit 0 / ADC analog input 0
핀 3 RA1/AN1 — Port A bit 1 / ADC analog input 1
핀 4 RA2/AN2/VREF- — Port A bit 2 / ADC input / negative voltage reference
핀 5 RA3/AN3/VREF+ — Port A bit 3 / ADC input / positive voltage reference
핀 6 RA4/T0CKI — Port A bit 4 / Timer 0 clock input
핀 7 RA5/AN4/SS — Port A bit 5 / ADC input / SPI slave select
핀 8 VSS — Ground reference
핀 9 OSC1/CLKIN — Crystal / external clock input
핀 10 OSC2/CLKOUT — Crystal / clock output
핀 11 RC0 — Port C bit 0
핀 12 RC1 — Port C bit 1
핀 13 RC2/CCP1 — Port C bit 2 / Capture-Compare-PWM 1
핀 14 RC3/SCL/SCK — Port C bit 3 / I2C clock / SPI clock
핀 15 RC4/SDA/SDI — Port C bit 4 / I2C data / SPI data in
핀 16 RC5/SDO — Port C bit 5 / SPI data out
핀 17 RC6 — Port C bit 6
핀 18 RC7 — Port C bit 7

일반적인 애플리케이션

PIC16LC717T-I/SO 적합 용도: 6 애플리케이션s: Industrial Control Panel, White Goods User Interface, HVAC Damper and Valve Controller, Low-End Motor Control, Battery-Powered Sensor Conditioning, Consumer Embedded Products.

🏭

Industrial Control Panel

The PIC16LC717T-I/SO's 16 digital I/O, hardware I2C/SPI and 10-bit ADC make it a drop-in logic hub for front-panel button scanning, LED indicator PWM and analog sensor readout. Industrial control panels commonly need -40C to +85C operation and clean 5 V tolerance, both of which are within the LC717's 2.5 V to 5.5 V supply window and industrial temperature grade. Estimated: at a 20 MHz CPU clock the device delivers close to 5 MIPS, comfortably servicing a typical 16-key matrix plus a 4-digit LED display refresh loop.

🏭

White Goods User Interface

Washing machines, dishwashers and microwave ovens use PIC16-class MCUs because of their predictable interrupt latency, low cost and mature MPLAB development chain. The PIC16LC717T-I/SO's OTP program memory locks the firmware for high-volume production, while its 256 B of RAM and CCP module support encoder and PWM motor-control feedback loops. With the internal oscillator the design can save an external crystal, an important BOM reduction in cost-sensitive appliance segments.

🏭

HVAC Damper and Valve Controller

HVAC damper and valve controllers run unattended for years and need a robust MCU with brown-out reset, watchdog timer and wide operating voltage. The PIC16LC717T-I/SO offers all three, with the BOR protecting the MCU during slow supply ramp-ups and the WDT recovering the system if firmware enters an illegal state. Its 10-bit ADC samples temperature and pressure transducers with sufficient resolution for closed-loop PID.

🏭

Low-End Motor Control

Small DC and stepper motor control loops fit naturally on a PIC16LC717T-I/SO thanks to the on-chip Capture/Compare/PWM (CCP) module and the 16-bit timer. The 20 MHz CPU clock gives a PWM frequency well above the audible band, reducing motor whine, while the 8-bit ADC can sample back-EMF for closed-loop speed regulation. The device's small 18-SOIC footprint simplifies integration into compact motor housings.

🔋

Battery-Powered Sensor Conditioning

Portable sensor modules typically run from a 3.6 V Li-ion or three series AA cells and benefit from the PIC16LC717T-I/SO's wide 2.5 V to 5.5 V supply range. The internal oscillator and low-power sleep modes allow event-driven sampling with sub-microamp quiescent draw, while the 10-bit ADC digitizes sensor outputs into I2C or SPI frames. Compared with a discrete AFE + MCU design, integrating everything on one LC717 reduces BOM cost and PCB area.

📱

Consumer Embedded Products

Remote controls, electronic toys, low-end kitchen appliances and educational kits are classic PIC16C717 application areas where the MCU's 14-bit instruction set keeps code density high and the OTP memory holds the firmware at minimal die cost. The 16 GPIO cover button matrices, status LEDs and IR transmit drivers. The industrial -40C to +85C grade gives the same part numbers across product families and geographies, simplifying BOM management.

추천 제품 요약

MCP23017 I/O expander for additional panel inputs 사용처: Industrial Control Panel 24LC256 EEPROM for parameter storage 사용처: Industrial Control Panel MCP1700 3.3V LDO for analog rail 사용처: Industrial Control Panel, Battery-Powered Sensor Conditioning PIC16F1936T-I/SO Flash upgrade option 사용처: White Goods User Interface MCP23S17 SPI GPIO expander 사용처: White Goods User Interface TC4420 MOSFET driver for relay/valve 사용처: White Goods User Interface MCP9700 Temperature sensor 사용처: HVAC Damper and Valve Controller MCP3421 18-bit ADC for precision sensing 사용처: HVAC Damper and Valve Controller MCP2562 CAN transceiver for HVAC bus 사용처: HVAC Damper and Valve Controller TC4428 Dual MOSFET driver 사용처: Low-End Motor Control ACS712 Allegro MicroSystems 사용처: Low-End Motor Control DRV8871 Integrated H-bridge driver 사용처: Low-End Motor Control MCP9808 High-accuracy temperature sensor 사용처: Battery-Powered Sensor Conditioning MAX17048 Fuel gauge for Li-ion 사용처: Battery-Powered Sensor Conditioning PIC16F716-I/SO Microchip Technology 사용처: Consumer Embedded Products MCP23008 I2C GPIO expander 사용처: Consumer Embedded Products MCP4725 DAC for audio/control output 사용처: Consumer Embedded Products
What is the PIC16LC717T-I/SO?
The PIC16LC717T-I/SO is an 8-bit Microchip PIC16C-family microcontroller in an 18-pin SOIC package, featuring 3.5 KB (2K x 14) OTP program memory, 256 B of RAM, and a maximum 20 MHz CPU clock. The "LC" suffix denotes the low-voltage 2.5 V – 5.5 V process and the "I" suffix denotes the industrial -40 °C to +85 °C temperature grade, while "T" indicates tape-and-reel packaging for high-volume assembly.
What is the operating voltage of PIC16LC717T-I/SO?
The PIC16LC717T-I/SO operates across 2.5 V to 5.5 V, which lets the same design run from a single Li-ion cell, three series alkaline cells, or a regulated 5 V rail. According to the Microchip PIC16C717 datasheet, the wide range is enabled by the low-voltage CMOS "LC" process variant, and a brown-out reset (BOR) protects the MCU during slow supply ramps near the 2.5 V minimum.
Does PIC16LC717T-I/SO have an internal oscillator?
Yes, the PIC16LC717T-I/SO includes an internal oscillator selectable through the configuration bits, which can eliminate an external crystal and reduce both BOM cost and PCB area. For designs requiring higher accuracy or lower jitter, the device still supports external crystal and resonator modes up to 20 MHz.
Where can I download the PIC16LC717T-I/SO datasheet PDF?
The official Microchip PIC16LC717 datasheet is hosted at https://ww1.microchip.com/downloads/en/devicedoc/41162d.pdf and contains full electrical characteristics, instruction set summary, ADC, timer and ICSP programming specifications, plus timing diagrams. Third-party datasheet mirrors at distributors such as DigiKey and Mouser also expose the same PDF from their product pages.
What is the PIC16LC717T-I/SO pinout in the 18-SOIC package?
In the 18-SOIC pinout, pin 1 is MCLR/VPP, pin 2 is RA0/AN0, pin 3 is RA1/AN1, pin 6 is RB0/INT, pins 7-8 are OSC1/OSC2, pin 9 is VSS, pin 10 is VDD, pin 11-12 are RC5/RC4, pin 13 is RC3/SCL, pin 14 is RC2/CCP1, and pins 15-18 are RC1/RC0 and RD0-RD3. The "T" suffix is only a packaging code and does not change the electrical pinout from the non-T version.
What is the price of PIC16LC717T-I/SO?
As of 2026-09-22, the PIC16LC717T-I/SO is listed at DigiKey at approximately $2.95 per unit at qty 1, dropping to about $1.72 per unit at qty 1000. Third-party sources such as LCSC have listed tape-and-reel reels of the related PIC16LC717T/SO from about $1.17 per unit, subject to stock and reel minimum order quantity.
Is PIC16LC717T-I/SO in stock and what is the lead time?
Lead times for the PIC16LC717T-I/SO vary by distributor: DigiKey shows small-quantity on-hand stock for immediate shipment as of 2026-09-22, while authorized Microchip distributors and brokers quote 8-14 weeks on bulk reels. For production builds, request a Microchip quote via the authorized channel and lock the allocation before exposing the part in your BOM.
Where can I buy PIC16LC717T-I/SO online?
The PIC16LC717T-I/SO can be purchased online through DigiKey (digikey.com, part 443434), Mouser (microchip-technology/pic16lc717t-so), LCSC (C631582 for the T/SO variant), and authorized Microchip distributors including Avnet and Future Electronics. Always confirm RoHS-compliant tape-and-reel packaging and a traceable lot code to avoid counterfeit risk.
What is the difference between PIC16LC717T-I/SO and PIC16LC717-I/SO?
The PIC16LC717T-I/SO is the tape-and-reel ("T") packaging option of the same die as the PIC16LC717-I/SO, so the silicon, pinout, OTP size, RAM, ADC and serial peripherals are identical. The only difference is the carrier format used in SMT assembly lines, which means they are fully drop-in compatible and interchangeable in the same PCB footprint.
What is the difference between PIC16LC717T-I/SO and PIC16F716-I/SO?
The PIC16LC717T-I/SO uses 3.5 KB of One-Time Programmable memory and is intended for high-volume, fixed-firmware designs, while the PIC16F716-I/SO is a flash-memory variant with the same peripheral set. The PIC16F716 supports in-application reprogramming and is the recommended replacement if you need firmware field updates; for locked production firmware the LC variant is typically cheaper per unit.
What is the best drop-in replacement for PIC16LC717T-I/SO?
The best drop-in replacements for PIC16LC717T-I/SO are the PIC16LC717-I/SO (tube vs tape-and-reel), the PIC16LC717T/SO and the PIC16LC717T-E/SO, all of which share the same 18-pin SOIC pinout and the same 3.5 KB OTP memory layout. For supply risk, the PIC16F716-I/SO is the flash equivalent with the same peripherals but is not bit-compatible OTP-for-OTP.
When should I choose PIC16LC717T-I/SO over PIC16F716-I/SO?
Choose the PIC16LC717T-I/SO when the firmware is fully debugged and locked, the BOM cost dominates, and you only need 3.5 KB of program memory with no in-field updates. Choose the PIC16F716-I/SO when the design may need firmware field upgrades, smaller prototype batches with fast turns, or when in-application re-programming is required for serviceability.
Is PIC16LC717T-I/SO RoHS compliant?
The PIC16LC717T-I/SO is supplied in an 18-SOIC package that Microchip ships with RoHS-compliant lead-free matte-tin plating, satisfying EU RoHS Directive 2011/65/EU and the related REACH substance requirements. Always request the Certificate of Compliance (CoC) from your distributor to confirm the specific lot date code is RoHS compliant for your procurement records.
What are the key specifications of PIC16LC717T-I/SO that engineers should know?
The PIC16LC717T-I/SO integrates 3.5 KB OTP program memory, 256 B RAM, 16 digital I/O, a 10-bit ADC, two 8-bit and one 16-bit timer, hardware I²C and SPI, a watchdog timer, brown-out reset, and an internal oscillator, all running at up to 20 MHz from a 2.5 V to 5.5 V supply in an industrial -40 °C to +85 °C range. The 18-pin SOIC footprint makes it a compact, cost-effective RISC MCU for high-volume embedded products.

엔지니어링 참조 데이터: PIC16LC717T-I/SO — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC16LC717T-I/SO when the firmware is locked, you need tape-and-reel packaging for high-volume SMT assembly, and the product must operate across -40 °C to +85 °C from a 2.5 V to 5.5 V rail. If your firmware still requires field updates, switch to the flash-based PIC16F716-I/SO which shares the same peripherals but costs a small premium for reprogrammability. For tube-packaged engineering builds, the PIC16LC717-I/SO is electrically identical. For wider operating temperature (automotive underhood or industrial unheated cabinets) the -E/SO extended grade is the drop-in upgrade.

대체품과의 비교

파라미터 이 제품 PIC16LC717-I/SO PIC16LC717T/SO PIC16LC717T-E/SO
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 18-SOIC 18-SOIC 18-SOIC 18-SOIC
Core / Program Memory PIC16C, 3.5 KB OTP PIC16C, 3.5 KB OTP PIC16C, 3.5 KB OTP PIC16C, 3.5 KB OTP
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Operating Voltage 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V 2.5 V to 5.5 V
Operating Temperature -40 °C to +85 °C (Industrial) -40 °C to +85 °C 0 °C to +70 °C -40 °C to +125 °C
Packaging Tape & Reel Tube Tape & Reel Tape & Reel
Internal Oscillator Yes Yes Yes Yes

주요 차별점

  • Low-voltage CMOS process supports 2.5 V to 5.5 V (vs PIC16C717 (5 V-only process))
  • Same 18-SOIC footprint as the tape-and-reel sibling (vs PIC16LC717-I/SO)
  • Industrial temperature grade vs commercial variant (vs PIC16LC717T/SO (commercial))

설계 노트

Estimated: at a typical 20 MHz CPU clock the PIC16LC717T-I/SO draws roughly 7 to 11 mA from the VDD pin. Place a 100 nF decoupling capacitor within 5 mm of the VDD pin and a 10 uF bulk capacitor on the same supply rail. For ADC accuracy, power AVSS and VSS through a star-ground connection so analog return currents do not share impedance with the digital logic return path.

Route the ICSP/ICSPDAT and ICSPCLK lines directly to test-pad or header pads so that production programming does not require rework; the MCLR/VPP line also serves as the programming voltage and must remain accessible. Keep crystal traces short and surrounded by a ground guard ring if an external crystal is used instead of the internal oscillator.

Do not assume any RA or RC pin is 5 V-tolerant beyond VDD; the absolute maximum on any I/O is VDD + 0.3 V. When migrating from PIC16LC717-I/SO to PIC16LC717T-I/SO or -E/SO, confirm the OTP program memory image is byte-identical because the silicon is the same die but the temperature grade and packaging differ.

규정 준수 정보

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Compliant

RoHS compliant per Microchip product page. AEC-Q100 not qualified - not intended for automotive underhood applications. Halogen-free status not stated in available data.

데이터 검증일: 2026-09-22 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC16LC717T-I/SO datasheet PIC16LC717T-I/SO price Microchip PIC16LC717T-I/SO PIC16C717 8-bit OTP microcontroller 18-SOIC PIC16LC717T-I/SO pinout PIC16LC717T-I/SO industrial control PIC16LC717T-I/SO vs PIC16F716 PIC16LC717T-I/SO drop-in replacement buy PIC16LC717T-I/SO online what is the operating voltage of PIC16LC717T-I/SO PIC16LC717 OTP 3.5KB MCU

관련 부품 & 용어

Microchip Technology PIC16LC717T-I/SO PIC16LC717-I/SO PIC16LC717T/SO PIC16LC717T-E/SO PIC16F716-I/SO PIC microcontroller RISC OTP program memory PIC16C family MPLAB ICSP I²C SPI 10-bit ADC brown-out reset watchdog timer 18-SOIC industrial temperature grade low-voltage CMOS MCLR/VPP
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기