PIC16LF18854-I/ML - 8-Bit 32MHz XLP MCU 7KB Flash 28-QFN | Microchip
부품 번호: PIC16LF18854-I/ML ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.56 | $25.60 |
| 100 | $2.27 | $227.00 |
| 500 | $2.02 | $1,010.00 |
| 1,000 | $1.78 | $1,780.00 |
PIC16LF18854-I/ML 개요
What is a Microcontroller (MCU)? A microcontroller is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), optional EEPROM, and I/O peripherals into one IC. Within the broader taxonomy, an MCU belongs to embedded computing, sits under microcontrollers, and is classified by its core architecture — here, an 8-bit RISC core with 14-bit wide instructions (the PIC16 mid-range enhanced core). The "LF" suffix denotes the 1.8V–3.6V wide-voltage variant optimized for low-power operation.
Key differentiating features include integrated 10-bit ADC with computation (ADC2), a 5-bit/8-bit DAC, two Capture/Compare/PWM (CCP) modules, two 10-bit PWMs, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), Zero-Cross Detect (ZCD), and on-chip temperature indicator. Communication is provided by EUSART, two SPI/I2C (MSSP), and a 32 kHz internal oscillator for sleep-time accuracy.
At the architecture level, the device pairs a 49-instruction enhanced mid-range core with a 16-level hardware stack, hardware multiply assist, and CLC-based interconnect that lets designers wire peripherals without code overhead. The integrated Core Independent Peripherals (CIPs) — HLT, WWDT, CRC/SCAN — support functional-safety-style features for deterministic response.
Typical applications include low-power IoT sensor nodes, battery-powered wearables, consumer white goods, e-metering, HVAC controls, and USB/HID adapters when paired with a companion transceiver. Designers select this part when sleep current, deterministic CIP behaviour, and 5V-tolerant-tolerant I/O on a 28-QFN footprint are all required in the same BOM line.
When laying out the PCB, expose the QFN thermal/epposed pad (EP) to a top-layer copper flood with at least 8 thermal vias to the inner/inner planes. Decouple VDD with a 100 nF X7R placed within 2 mm of the pin, and add a bulk 1 µF–10 µF if the load step exceeds 50 mA.
This page synthesizes distributor pricing, drop-in same-footprint alternatives, and application guidance not found in the manufacturer datasheet alone.
드롭인 대체품: PIC16LF18854-I/ML — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC16LF18854-I/ML (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, Program Memory (Flash), Communication.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC16LF18855-I/ML
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC16F18854-I/ML
✅ 드롭인✓ 재고 있음
$1.02 / 개
데이터시트 보기 →PIC16LF18856-I/ML
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.55 / 개
데이터시트 보기 →PIC16LF18857-I/ML
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC16LF18875-I/ML
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.55 / 개
데이터시트 보기 →PIC16LF18854-I/ML 최대 정격 & 전기적 특성
| Core | PIC16 8-bit RISC, 14-bit instruction set (enhanced mid-range) |
| CPU Speed (max) | 32 MHz |
| Program Flash | 7 KB (4K x 14 words) |
| Data SRAM | 512 bytes |
| Data EEPROM | 256 bytes |
| Operating Voltage | 1.8 V to 3.6 V (LF suffix) |
| 패키지 | 28-QFN (6x6 mm) with exposed pad |
| ADC | 10-bit ADC with Computation (ADC2) |
| DAC | 5-bit and 8-bit DAC |
| Timers/PWM | 2x CCP, 2x 10-bit PWM, CWG, NCO |
| Communication | 1x EUSART, 2x MSSP (SPI/I2C) |
| Core Independent Peripherals | CLC, ZCD, HLT, WWDT, CRC/SCAN, temp indicator |
| Low-Power Mode | XLP — eXtreme Low Power (sleep / doze / idle) |
| 동작 온도 | -40C to +85C (industrial, "I") |
| 실장 유형 | Surface Mount (QFN with EP) |
| RoHS 상태 | Compliant |
PIC16LF18854-I/ML 핀 구성
| 핀 1 | RA5 — Bidirectional I/O pin / analog input / CLC output |
| 핀 2 | RA4 — Bidirectional I/O pin / analog input / CLC output |
| 핀 3 | RA3 — Bidirectional I/O pin / analog input / reference voltage |
| 핀 4 | RC5 — Bidirectional I/O pin / CCP / PWM |
| 핀 5 | RC4 — Bidirectional I/O pin / PWM output |
| 핀 6 | RC3 — Bidirectional I/O pin / SCL (MSSP) |
| 핀 7 | RC6 — Bidirectional I/O pin / TX (EUSART) |
| 핀 8 | RC7 — Bidirectional I/O pin / RX (EUSART) |
| 핀 9 | RB7 — Bidirectional I/O pin / system clock output |
| 핀 10 | RB6 — Bidirectional I/O pin / ICD clock |
| 핀 11 | RB5 — Bidirectional I/O pin / analog input |
| 핀 12 | RB4 — Bidirectional I/O pin / analog input |
| 핀 13 | RC2 — Bidirectional I/O pin / analog input / DAC |
| 핀 14 | RC1 — Bidirectional I/O pin / CCP / analog input |
| 핀 15 | RC0 — Bidirectional I/O pin / analog input |
| 핀 16 | RA2 — Bidirectional I/O pin / analog input / DAC reference |
| 핀 17 | RA1 — Bidirectional I/O pin / analog input / DAC output |
| 핀 18 | RA0 — Bidirectional I/O pin / analog input |
| 핀 19 | VSS — Ground reference |
| 핀 20 | VDD — Positive supply (1.8V–3.6V) |
| 핀 21 | RB0 — Bidirectional I/O pin / ZCD / CLC output |
| 핀 22 | RB1 — Bidirectional I/O pin / analog input |
| 핀 23 | RB2 — Bidirectional I/O pin / analog input |
| 핀 24 | RB3 — Bidirectional I/O pin / analog input |
| 핀 25 | RA6 — Bidirectional I/O pin / oscillator / CLC output |
| 핀 26 | RA7 — Bidirectional I/O pin / oscillator / CLC output |
| 핀 27 | MCLR — Master Clear (reset) input, active-low |
| 핀 28 | VSS — Ground reference |
일반적인 애플리케이션
PIC16LF18854-I/ML 적합 용도: 7 애플리케이션s: Battery-Powered IoT Sensor Nodes, Consumer White Goods (Washing Machines / Dishwashers), Smart Wearable / Fitness Bands, HVAC Climate Controls, Electronic Metering / Smart Utility, USB HID Peripherals / Adapters, LED Lighting / Dimmable Lamps.
Battery-Powered IoT Sensor Nodes
The PIC16LF18854-I/ML fits battery-powered IoT sensor nodes thanks to its 1.8V–3.6V wide-voltage range and eXtreme Low-Power (XLP) technology. Its 32 kHz internal oscillator keeps time during sleep, while the 10-bit ADC with Computation (ADC2) off-loads averaging and threshold checks from the CPU. Configurable Logic Cells (CLC) and the Windowed Watchdog Timer (WWDT) let the part wake only on meaningful events. Compared to a discrete timer+MCU approach, this single chip reduces BOM count and sleep current, extending coin-cell or 2x AA battery life.
추천
Consumer White Goods (Washing Machines / Dishwashers)
The PIC16LF18854-I/ML serves consumer white goods where 7 KB Flash holds user-interface state machines plus motor-control sequencing. The Complementary Waveform Generator (CWG) and dual 10-bit PWMs drive TRIAC/IGBT half-bridges for universal-motor or BLDC control, while the Zero-Cross Detect (ZCD) synchronizes phase-angle firing with the AC line. With hardware CRC/SCAN and a Windowed Watchdog Timer, the design meets IEC 60730 Class B household-appliance safety expectations. Its 28-QFN (6x6) footprint fits compact display modules.
추천
Smart Wearable / Fitness Bands
In smart wearables, the PIC16LF18854-I/ML drives LEDs, reads PPG/heart-rate sensor data, and manages Bluetooth sleep handshakes — all on a 1.8V Li-ion cell rail. The integrated 5/8-bit DAC calibrates the optical sensor's bias, while the EUSART interfaces with a low-energy BLE module. With nA-level sleep currents, the part can last weeks between charges in an always-on wearable. Its 28-QFN (6x6) keeps the BOM small enough for wristband-class PCBs.
추천
HVAC Climate Controls
The PIC16LF18854-I/ML handles thermostat and damper-actuator control in HVAC systems, where the ADC2 channels read NTC thermistors, the 10-bit PWM drives TRIAC-fired heating stages, and the EUSART bridges to a Wi-Fi module for cloud control. The hardware CRC/SCAN block supports functional-safety integrity checks, while the temperature indicator provides on-chip die-temperature monitoring for fan-control loops. The 28-QFN footprint simplifies reflow in compact wall-mount thermostats.
추천
Electronic Metering / Smart Utility
The PIC16LF18854-I/ML's 256-byte EEPROM is ideal for e-metering — it stores tariff tables, calibration constants, and tamper logs without external NVM. The 10-bit ADC with Computation reads current-sense shunt or CT inputs, while the Hardware Limit Timer (HLT) reacts within microseconds to overloads. Combined with XLP sleep modes, the design can run years on the meter's primary-cell battery. The 28-QFN (6x6) is small enough for DIN-rail form factors.
추천
USB HID Peripherals / Adapters
The PIC16LF18854-I/ML pairs with a Microchip USB3300 or MIC2026 USB 2.0 controller to build USB HID adapters (keyboards, mice, custom-input devices). The MSSP peripherals drive the SPI/I2C link to a sensor hub, while the CLC block implements debounce logic on capacitive-touch pads. The 256-byte EEPROM retains user-pairing or calibration across power cycles. With 7 KB Flash and the 28-QFN footprint, the design fits inside a USB dongle housing.
추천
LED Lighting / Dimmable Lamps
The PIC16LF18854-I/ML's 10-bit PWMs and CWG combine to deliver flicker-free dimming for LED lighting. The ZCD synchronizes PWM edges to the AC line for 0–10V or TRIAC dimmer compatibility, while the 8-bit DAC drives constant-current regulator references. With XLP sleep modes, the design still meets Energy Star standby requirements (<100 mW). The 28-QFN (6x6) layout fits inside PAR30 / A19 lamp bases.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC16LF18854-I/ML — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC16LF18855-I/ML | PIC16F18854-I/ML | PIC16LF18856-I/ML | PIC16LF18857-I/ML | PIC16LF18875-I/ML |
|---|---|---|---|---|---|---|
| Package | 28-QFN (6x6) ML | 28-QFN (6x6) ML - same | 28-QFN (6x6) ML - same | 28-QFN (6x6) ML - same | 28-QFN (6x6) ML - same | 28-QFN (6x6) ML - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | PIC16 8-bit, 14-bit instructions | PIC16 8-bit, 14-bit instructions | PIC16 8-bit, 14-bit instructions | PIC16 8-bit, 14-bit instructions | PIC16 8-bit, 14-bit instructions | PIC16 8-bit, 14-bit instructions |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Max CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Program Flash | 7 KB (4K x 14) | 14 KB (8K x 14) - +100% | 7 KB (4K x 14) | 14 KB+ (larger) | 14 KB+ (larger) | 14 KB+ (larger) |
| Data SRAM | 512 bytes | 1 KB | 512 bytes | 1 KB+ | 1 KB+ | 1 KB+ |
| Data EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C |
| XLP / Low Power | Yes (XLP) | Yes (XLP) | Yes (XLP) | Yes (XLP) | Yes (XLP) | Yes (XLP) |
주요 차별점
- Expanded memory in same 28-QFN footprint (vs PIC16LF18855-I/ML)
- 5V-capable supply range (vs PIC16F18854-I/ML)
- Compact 6x6 mm footprint for miniaturized designs (vs PIC16LF18855-I/SP (28-SPDIP))
설계 노트
The 28-QFN (6x6) package requires an exposed thermal pad (EP) tied to VSS for both electrical ground and thermal dissipation. Per Microchip layout guidelines, the EP must be soldered to a top-layer copper flood of at least the same footprint area, with 8–10 thermal vias (0.3 mm drill, 0.6 mm pad) stitching the top flood to the inner ground plane. Failure to solder the EP can cause erratic logic or thermal shutdown at moderate loads.
Decouple VDD with a 100 nF X7R placed within 2 mm of the VDD pin, and add a bulk 1 µF–10 µF tantalum or ceramic capacitor at the package's power pin for transient suppression. The PIC16LF18854 draws microamp-level sleep current but sub-mA peaks when the ADC2 is active — undersized bulk capacitance will cause voltage dips and brown-out resets. For battery applications, choose a low-Iq LDO such as MCP1700 downstream of the cell.
Do not exceed 3.6 V on VDD — the LF suffix in PIC16LF18854 denotes the low-voltage variant (1.8 V–3.6 V). Use PIC16F18854 instead if 5 V rails are required. The MCLR pin requires a 10 kΩ pull-up to VDD; floating MCLR causes intermittent resets. Unused I/O pins must be configured as outputs low or inputs with the WPUEN bit cleared to avoid shoot-through or phantom interrupts.
Keep the 32.768 kHz crystal traces short (<5 mm) and symmetric, with a guard ground around the oscillator pins. Route the analog ADC2 inputs away from PWM and digital switching lines to minimize coupled noise; if unavoidable, route perpendicular and add a small RC filter (10 Ω + 100 pF). MCLR trace should be kept short to prevent false resets from EMI; add a 100 nF cap on MCLR for production environments.
규정 준수 정보
RoHS compliant per Microchip product page and distributor listings; lead-free and halogen-free per Microchip environmental data. AEC-Q100 qualification is not applicable — automotive-grade variants (PIC16LF18854-E/ML or -I/VAO) are available separately.
