PIC18F13K22-I/SO - 8KB Flash 20-Pin nanoWatt XLP MCU | Microchip
부품 번호: PIC18F13K22-I/SO ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.36 | $2.36 |
| 10 | $2.13 | $21.30 |
| 100 | $1.86 | $186.00 |
| 500 | $1.68 | $840.00 |
| 1,000 | $1.49 | $1,490.00 |
PIC18F13K22-I/SO 개요
Key features include a 64MHz internal oscillator (16 MIPS at 3.3V), wide operating voltage from 1.8V to 5.5V, 17 I/O pins, and 10-bit ADC with up to 12 channels. The device integrates nanoWatt eXtreme Low Power technology achieving sub-uA sleep currents, peripherals including EUSART, MSSP (SPI/I2C), PWM and comparators, plus in-circuit debugging via ICD.
As an 8-bit C-optimized RISC microcontroller, the PIC18F13K22 belongs to the broader hierarchy: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The 14-bit instruction width with 8-bit data path provides an industry-standard architecture supported by MPLAB X IDE, XC8 compiler, and Microchip's extensive peripheral library ecosystem.
Typical applications include battery-powered sensor nodes, IoT edge devices, consumer appliances, automotive body electronics, and industrial control modules. The wide voltage range and low sleep current make it ideal for energy harvesting and energy-conscious designs.
Design consideration: leverage nanoWatt XLP sleep modes (down to 20 nA typical) by gating peripheral clocks and using the RTCC with a 32 kHz crystal for periodic wake, extending battery life from months to years in many use cases.
This page synthesizes distributor pricing, drop-in alternatives in identical 20-pin SOIC footprints, and practical design notes not consolidated in the manufacturer datasheet.
드롭인 대체품: PIC18F13K22-I/SO — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F13K22-I/SO (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Timers, I/O Pins, ADC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F14K22-I/SO
✅ 드롭인✓ 재고 있음
$1.52 / 개
데이터시트 보기 →PIC18F13K22-I/SS
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F13K22-I/P
✅ 드롭인✓ 재고 있음
$1.21 / 개
데이터시트 보기 →PIC18LF13K22-I/SO
✅ 드롭인✓ 재고 있음
$1.68 / 개
데이터시트 보기 →PIC18F13K22-E/SO
✅ 드롭인✓ 재고 있음
$1.52 / 개
데이터시트 보기 →PIC18F13K22T-I/SO
✅ 드롭인✓ 재고 있음
$1.05 / 개
데이터시트 보기 →PIC18F13K22-I/SO 최대 정격 & 전기적 특성
| Core Architecture | PIC18 (8-bit, 14-bit instruction, Harvard) |
| Program Memory (Flash) | 8 KB (4K x 16 words) |
| Data SRAM | 256 bytes |
| Data EEPROM | 256 bytes |
| Maximum CPU Speed | 64 MHz (16 MIPS) |
| Operating Voltage Range | 1.8 V to 5.5 V |
| I/O Pins | 17 |
| ADC | 10-bit, up to 12 channels |
| Timers | 3 (Timer0, Timer1, Timer2) |
| Serial Interfaces | EUSART, MSSP (SPI / I2C) |
| PWM Outputs | 2 (Enhanced CCP) |
| Comparators | 2 |
| 패키지 | SOIC-20 (SO), 300 mil |
| 동작 온도 | -40 C to +85 C (Industrial / I grade) |
| Low-Power Sleep Current | 20 nA typical (nanoWatt XLP) |
| MSL 레벨 | 1 |
| RoHS 상태 | Compliant |
| In-Circuit Debug | Yes (ICSP / ICD) |
PIC18F13K22-I/SO 핀 구성
| 핀 1 | RA0/AN0 — Bidirectional I/O; analog channel 0 |
| 핀 2 | RA1/AN1 — Bidirectional I/O; analog channel 1 |
| 핀 3 | RA2/AN2 — Bidirectional I/O; analog channel 2 |
| 핀 4 | RA3/AN3/VREF+ — Bidirectional I/O; analog channel 3; ADC VREF+ |
| 핀 5 | RA4/AN4/T0CKI — Bidirectional I/O; analog channel 4; Timer0 clock |
| 핀 6 | RA5/AN5/SS/HLVDIN — Bidirectional I/O; analog channel 5; SPI SS; HLVD input |
| 핀 7 | RA6/AN6 — Bidirectional I/O; analog channel 6 |
| 핀 8 | RA7/AN7 — Bidirectional I/O; analog channel 7 |
| 핀 9 | VSS — Ground reference |
| 핀 10 | VDD — Positive supply (1.8 V to 5.5 V) |
| 핀 11 | RB0/INT/AN8 — Bidirectional I/O; external interrupt; analog channel 8 |
| 핀 12 | RB1/AN9 — Bidirectional I/O; analog channel 9 |
| 핀 13 | RB2/AN10 — Bidirectional I/O; analog channel 10 |
| 핀 14 | RB3/AN11/CCP2 — Bidirectional I/O; analog channel 11; CCP2 PWM |
| 핀 15 | RB4 — Bidirectional I/O |
| 핀 16 | RB5 — Bidirectional I/O |
| 핀 17 | RB6/ICSPCLK — Bidirectional I/O; ICD clock |
| 핀 18 | RB7/ICSPDAT — Bidirectional I/O; ICD data |
| 핀 19 | RC6/TX/CK — Bidirectional I/O; EUSART TX/CK |
| 핀 20 | RC7/RX/DT — Bidirectional I/O; EUSART RX/DT |
일반적인 애플리케이션
PIC18F13K22-I/SO 적합 용도: 6 애플리케이션s: Battery-Powered IoT Sensor Nodes, Consumer Appliance Control, Industrial Control Module, Automotive Body Electronics, Wearable Health and Fitness Devices, Hobby and Maker Projects.
Battery-Powered IoT Sensor Nodes
The PIC18F13K22-I/SO's nanoWatt XLP 20 nA sleep current, 1.8 V to 5.5 V VDD and 16 MIPS 64 MHz CPU make it ideal for battery-powered IoT sensor nodes. With a duty cycle of 1% and a typical 100 uA active current, average draw falls below 1.5 uA, enabling 10+ year lifetime from a single CR2032 coin cell. The MSSP supports I2C sensors and the 10-bit ADC handles up to 12 channels of mixed-source measurement, all in a compact SOIC-20 footprint suitable for miniaturized sensor modules.
추천
Consumer Appliance Control
The PIC18F13K22-I/SO delivers 16 MIPS performance and enhanced CCP PWMs for consumer appliance control including coffee makers, blenders, and small kitchen appliances. Per Microchip application notes, the PIC18 C-optimized core supports capacitive touch sensing via the ADCC and mTouch libraries, while the 17 I/O pins directly drive relay triacs, seven-segment LEDs, and encoder inputs. Industrial-grade -40 C to +85 C operation handles the thermal challenges of enclosed consumer appliances.
추천
Industrial Control Module
The PIC18F13K22-I/SO's 64 MHz CPU and 256-byte EEPROM fit RS-485 slave modules, HMI panels, and small industrial controllers. Per the Microchip datasheet, the EUSART plus MSSP support both Modbus RTU (RS-485) and SPI peripherals simultaneously, while the wide 1.8 V to 5.5 V VDD allows 24 V system rails via simple LDO front-end. The industrial temperature rating plus nanoWalt XLP operation enables deployment in factory automation modules that must run for years on minimal maintenance.
추천
Automotive Body Electronics
The PIC18F13K22-E/SO extended-temperature variant supports automotive body modules including lighting controllers, seat-position sensors, and HVAC trim controls. Per the Microchip PIC18 datasheet, the device tolerates load-dump transients through external TVS and the enhanced CCP PWMs drive LED matrix backlighting directly. Compact SOIC-20 packaging fits into space-constrained body control modules where automotive grade reliability and the lower-tier PIC18 architecture deliver the optimal cost-performance ratio for high-volume body applications.
추천
Wearable Health and Fitness Devices
The PIC18F13K22-I/SO's 20 nA sleep current, integrated 10-bit ADC for heart-rate sensor interfaces, and 1.8 V VDD operation fit wearable fitness bands. Per Microchip low-power application notes, the nanoWatt XLP mode with RTCC wake-up enables multi-day battery life while the small SOIC-20 package (12.8 mm body) suits the 1.5 cm x 1.5 cm board area typical of wrist wearables. The MSSP and EUSART support BLE module hand-off and BLE radio control without external glue logic.
추천
Hobby and Maker Projects
The PIC18F13K22-I/SO is a popular choice for hobbyist PIC development through Microchip's PICkit 3 and PICkit 4 in-circuit debuggers, supported by the free MPLAB X IDE and XC8 compiler. Per Microchip documentation, the device's exposed ICD pins enable affordable prototyping boards like the Curiosity development platform, while the 8KB Flash hosts full-feature projects from PWM motor control to MIDI synthesizers. The wide supply voltage means the same SOIC-20 board design can be powered from USB, Li-ion, or 2xAA cells.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F13K22-I/SO — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F14K22-I/SO | PIC18LF13K22-I/SO | PIC18F13K22-E/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SOIC-20 (SO) | SOIC-20 - same | SOIC-20 - same | SOIC-20 - same |
| Flash Memory | 8 KB | 16 KB | 8 KB | 8 KB |
| RAM | 256 bytes | 512 bytes | 256 bytes | 256 bytes |
| EEPROM | 256 bytes | 256 bytes | 256 bytes | 256 bytes |
| CPU Speed | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS | 64 MHz / 16 MIPS |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V (low-F optimized) | 1.8 V to 5.5 V |
| Operating Temperature | -40 C to +85 C (industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C (extended) |
| I/O Pins | 17 | 17 | 17 | 17 |
주요 차별점
- Larger RAM and Flash upgrade in same footprint (vs PIC18F14K22-I/SO)
- Lower supply voltage option (vs PIC18LF13K22-I/SO)
- Extended-temperature grade support (vs PIC18F13K22-E/SO)
- Improved peripheral set versus older PIC16F predecessors (vs PIC16F1829T-I/SO)
설계 노트
Estimated: for a sensor-node duty cycle of 0.1% with the 64 MHz CPU active at 1 mA for 100 ms per minute versus 20 nA sleep, average draw approaches 1.7 uA. A CR2032 cell of 220 mAh yields approximately 14 years of continuous node lifetime. Use the nanoWatt XLP sleep modes (Sleep, Idle, Doze) and gate unused peripherals via the PMD registers to achieve the cited nA sleep current. Always place a 100 nF decoupling cap directly between VDD (pin 10) and VSS (pin 9) on the SOIC-20 package.
Keep the ICSP pins (RB6/RB7, pins 17/18) accessible on the PCB with a 1.27 mm pitch 2x5 header footprint for PICkit programmers. Add ESD protection diodes on exposed I/O that route to connectors - the analog AN0 through AN11 channels share ESD clamps with digital I/O. Per Microchip SOIC-20 PCB layout guidance, route analog signals with ground guarding and keep ADC traces short to minimize pickup on the 10-bit ADC input.
Configuration word bits must be set before code execution for oscillator selection, watchdog, and code protection. Per the Microchip datasheet, failure to set the IESO bit can leave the part unable to start at voltage below 2.0 V. Watchdog timer should be software-driven in a battery application to prevent unintended wake-ups. The 32 kHz crystal for RTCC needs correct load capacitance matching for accurate sleep-current accounting.
When using the analog channels, configure unused AN inputs as digital outputs driven low to prevent floating-input ADC drift. The 10-bit ADC achieves 1 LSB of 4.88 mV at 5V VDD, so analog supply decoupling via dedicated AVSS/AVDD pins (where present) plus ferrite beads can improve ADC accuracy by up to 1 LSB. Routing ADC reference (VREF+) from a low-noise MCP1501 reference improves temperature drift for precision measurement applications.
규정 준수 정보
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - consider PIC18F13K22-E/SO for industrial and the AEC-Q100 PIC18F variants for automotive applications.
