PIC18F4220T-I/ML - 4KB Flash 8-bit MCU, 44-pin QFN | Microchip
부품 번호: PIC18F4220T-I/ML ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.45 | $5.45 |
| 10 | $4.96 | $49.60 |
| 100 | $4.46 | $446.00 |
| 500 | $4.05 | $2,025.00 |
| 1,000 | $3.64 | $3,640.00 |
PIC18F4220T-I/ML 개요
What is a PIC18F microcontroller? The PIC18F is Microchip's 8-bit PIC microcontroller family using an enhanced Harvard architecture with 16-bit instructions and 8-bit data path, optimized for C-compilable embedded designs. PIC18F sits in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. These MCUs integrate Flash, RAM, EEPROM, ADC, PWM, and communication peripherals in a single chip, balancing code density, deterministic timing, and low power consumption.
Key features include 10 MIPS CPU performance at 40 MHz, 4 KB self-programmable Flash with EEPROM emulation, 512 bytes SRAM, 256 bytes EEPROM, an enhanced USART, MSSP (SPI/I2C), two 8-bit timers plus three 16-bit timers, two PWM modules, and nanoWatt technology for low-power idle/sleep modes with sub-microamp standby current.
The PIC18F4220 uses an enhanced Harvard RISC core (77 single-word instructions) with hardware multiplier, 16-bit instructions, and a 32-level hardware stack. The 40 MHz oscillator (10 MIPS) supports industrial 5V designs with analog-rich sensor interfaces. The 10-bit ADC includes acquisition timing and auto-conversion for precise temperature, voltage, and transducer measurements.
Typical applications include industrial control, HVAC sensors, white goods, motor control, lighting control, sensor conditioning, smart energy meters, USB/audio accessories, and human-machine interface panels. The wide I/O count and ADC channels fit multi-signal acquisition boards.
When designing with this part, ensure PCB layout exposes the QFN thermal/exposed pad to a copper pour for ground and thermal relief, since QFN packages rely on the die-attach paddle. Verify VIH/VIL thresholds match 5V logic and add 0.1 uF + 10 uF decoupling near the VDD pins.
This page synthesizes verified distributor availability, drop-in alternatives, and application guidance that goes beyond the manufacturer datasheet alone.
드롭인 대체품: PIC18F4220T-I/ML — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F4220T-I/ML (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Timers, Core Architecture, Communication.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC18F4420T-I/ML
✅ 드롭인✓ 재고 있음
$2.65 / 개
데이터시트 보기 →PIC18F4520T-I/ML
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F46K20T-I/ML
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC18F4220-I/ML
✅ 드롭인✓ 재고 있음
$3.97 / 개
데이터시트 보기 →PIC18F4320T-I/ML
✅ 드롭인✓ 재고 있음
$3.15 / 개
데이터시트 보기 →PIC18F4220T-I/ML 최대 정격 & 전기적 특성
| Product Type | 8-bit Microcontroller (MCU) |
| Family | PIC18F |
| Core Architecture | Enhanced Harvard RISC, 77 instructions |
| Program Memory (Flash) | 4 KB |
| Data SRAM | 512 bytes |
| Data EEPROM | 256 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS) |
| Supply Voltage (VDD) | 4.2 V to 5.5 V |
| I/O Pins | 36 |
| ADC | 10-bit, 13 channels |
| PWM Modules | 2 (10-bit) |
| Timers | 2 x 8-bit + 3 x 16-bit |
| Communication | EUSART, MSSP (SPI / I2C) |
| 패키지 | 44-pin QFN (ML) |
| 동작 온도 | -40 C to +85 C (Industrial) |
| RoHS 상태 | Compliant |
PIC18F4220T-I/ML 핀 구성
| 핀 1 | RA0/AN0 — Digital I/O / Analog input channel 0 |
| 핀 2 | RA1/AN1 — Digital I/O / Analog input channel 1 |
| 핀 3 | RA2/AN2/VREF- — Digital I/O / Analog input channel 2 / ADC Vref- |
| 핀 4 | RA3/AN3/VREF+ — Digital I/O / Analog input channel 3 / ADC Vref+ |
| 핀 5 | RA4/T0CKI — Digital I/O / Timer0 clock input |
| 핀 6 | RA5/AN4/SS — Digital I/O / Analog input 4 / SPI slave select |
| 핀 7 | OSC1/CLKI/RA7 — Crystal oscillator input / external clock / digital I/O |
| 핀 8 | OSC2/CLKO/RA6 — Crystal oscillator output / clock out / digital I/O |
| 핀 9 | RC0/T1OSO/T13CKI — Digital I/O / Timer1 oscillator output / Timer1/3 clock |
| 핀 10 | RC1/T1OSI/CCP2 — Digital I/O / Timer1 oscillator input / CCP2 output |
| 핀 11 | RC2/CCP1 — Digital I/O / CCP1 PWM output |
| 핀 12 | RC3/SCK/SCL — Digital I/O / SPI clock / I2C clock |
| 핀 13 | RC4/SDI/SDA — Digital I/O / SPI data in / I2C data |
| 핀 14 | RC5/SDO — Digital I/O / SPI data out |
| 핀 15 | RC6/TX/CK — Digital I/O / EUSART TX / clock |
| 핀 16 | RC7/RX/DT — Digital I/O / EUSART RX / data |
| 핀 17 | VSS — Ground reference |
| 핀 18 | VDD — Positive supply (4.2 V to 5.5 V) |
| 핀 19 | RB0/INT0/FLT0 — Digital I/O / external interrupt 0 / PWM fault input |
| 핀 20 | RB1/INT1 — Digital I/O / external interrupt 1 |
| 핀 21 | RB2/INT2 — Digital I/O / external interrupt 2 |
| 핀 22 | RB3/CCP2 — Digital I/O / CCP2 output |
| 핀 23 | RB4 — Digital I/O / interrupt-on-change |
| 핀 24 | RB5 — Digital I/O / interrupt-on-change |
| 핀 25 | RB6/PGC — Digital I/O / ICSP clock |
| 핀 26 | RB7/PGD — Digital I/O / ICSP data |
| 핀 27 | MCLR/VPP/RE3 — Master clear reset / programming voltage / digital I/O |
| 핀 28 | RD0 — Digital I/O |
| 핀 29 | RD1 — Digital I/O |
| 핀 30 | RD2 — Digital I/O |
| 핀 31 | RD3 — Digital I/O |
| 핀 32 | RD4 — Digital I/O |
| 핀 33 | RD5 — Digital I/O |
| 핀 34 | RD6 — Digital I/O |
| 핀 35 | RD7 — Digital I/O |
| 핀 36 | VSS — Ground reference |
| 핀 37 | VDD — Positive supply (4.2 V to 5.5 V) |
| 핀 38 | RE0/RD — Digital I/O / parallel slave port read |
| 핀 39 | RE1/WR — Digital I/O / parallel slave port write |
| 핀 40 | RE2/CS — Digital I/O / parallel slave port chip select |
| 핀 41 | AVSS — Analog ground reference |
| 핀 42 | AVDD — Analog positive supply |
| 핀 43 | RC0/T1OSO/T13CKI — Digital I/O (alternate pin remap) |
| 핀 44 | EP — Exposed thermal pad - tie to ground |
일반적인 애플리케이션
PIC18F4220T-I/ML 적합 용도: 6 애플리케이션s: Industrial Sensor Node, HVAC Control Board, White Goods User Interface, Lighting Control Module, Smart Energy Meter, Human-Machine Interface Panel.
Industrial Sensor Node
The PIC18F4220T-I/ML fits industrial sensor nodes because of its 4.2V-5.5V VDD, 36 I/O, and thirteen 10-bit ADC channels with built-in acquisition timing. With 4 KB Flash and 512 bytes RAM, it runs C-compiled firmware for temperature, pressure, flow, and switch sensors. The nanoWatt technology supports idle modes under 1 uA for line-powered industrial installations. Place decoupling capacitors (0.1 uF + 10 uF) near VDD, and use the QFN exposed pad as a thermal/ground anchor on a 1-oz copper pour.
추천
HVAC Control Board
HVAC control boards need a 5V-tolerant MCU with rich ADC and PWM channels for fan speed, damper, and thermistor interfaces. The PIC18F4220T-I/ML provides 13 10-bit ADC inputs (multi-zone temperature and pressure), 2 PWM modules (fan and valve control), and EUSART (modbus or BACnet link). 4 KB Flash fits typical HVAC firmware with state-machine control loops, while the -40 C to +85 C industrial grade handles unconditioned plant rooms. Tie MCLR through 10 kohm pullup and add watchdog timer config bits for unattended operation.
추천
White Goods User Interface
The PIC18F4220T-I/ML is well suited for white goods user interface boards (washing machines, dishwashers, ovens) because of its 36 I/O pins for keypad, LED, and 7-segment display, plus EUSART for control-board link. Its 5V VDD matches legacy appliance power rails and industrial-grade temperature range handles under-cabinet heat. 4 KB Flash runs menu logic, key debounce, and fault routines; 512 bytes RAM handles display buffers. Use hardware PWM for buzzer tones and CCP for triac-zero-cross timing.
추천
Lighting Control Module
Lighting control modules benefit from the PIC18F4220T-I/ML's 2 PWM modules for dimming, 13 ADC channels for ambient-light and occupancy sensing, and EUSART for DMX-512 or DALI bridges. Its 4 KB Flash stores dim curves and scene presets; the nanoWatt idle modes drop standby power for always-on wall switches. Use optoisolators on TRIAC outputs for mains isolation and a 5V regulator fed from the line side. The 44-pin QFN provides a low-profile package suitable for slim wall-plate designs.
추천
Smart Energy Meter
Smart energy meters leverage the PIC18F4220T-I/ML's 10-bit ADC (13 channels) to sample current transformers and voltage dividers for kWh computation. Its 5V operation matches analog front-end op-amps and the EUSART/MSSP peripherals link to PLC or wireless modules for AMR. With 4 KB Flash, the meter can store tariffs and logging; 256 bytes EEPROM stores non-volatile configuration. Use the QFN's exposed pad for ground return on the analog section, and keep ADC traces away from TRIAC switching nodes.
추천
Human-Machine Interface Panel
The PIC18F4220T-I/ML drives small HMI panels with its 36 I/O to scan keypads, drive character LCDs, and serialize data to a master controller via EUSART. The 4 KB Flash fits menu logic, RTC emulation via Timer1, and fault diagnostics; 512 bytes RAM handles LCD buffers. Its -40 C to +85 C industrial range suits factory-floor panels. Use the MSSP (SPI) to drive graphical LCDs and the CCP module for backlight PWM dimming; add ESD protection on all user-facing pins.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC18F4220T-I/ML — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F4420T-I/ML | PIC18F4520T-I/ML | PIC18F46K20T-I/ML | PIC18F4320T-I/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin QFN (ML) | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same | 44-pin QFN (ML) - same |
| Program Memory (Flash) | 4 KB | 16 KB | 32 KB | 64 KB | 8 KB |
| Data SRAM | 512 bytes | 768 bytes | 1.5 KB | 3.6 KB | 512 bytes |
| Data EEPROM | 256 bytes | 256 bytes | 256 bytes | 1 KB | 256 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 40 MHz (10 MIPS) | 64 MHz (16 MIPS) | 40 MHz (10 MIPS) |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 1.8 V to 5.5 V | 4.2 V to 5.5 V |
| I/O Pins | 36 | 36 | 36 | 36 | 36 |
| ADC | 10-bit, 13 channels | 10-bit, 13 channels | 10-bit, 13 channels | 10-bit, 14 channels | 10-bit, 13 channels |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) |
주요 차별점
- Legacy PIC18 baseline with broad code base and tool support (vs PIC18F46K20T-I/ML)
- Lower cost entry point with adequate Flash for small firmware (vs PIC18F4320T-I/ML)
- True 5V VDD tolerance without voltage translation (vs PIC18F46K20T-I/ML)
설계 노트
The PIC18F4220T-I/ML's 44-pin QFN package dissipates heat through the exposed thermal pad (EP) on pin 44. Solder the EP to a PCB copper pour of at least 0.5 square inches connected to ground. For industrial sensor designs at 40 MHz and 5 V, the device draws approximately 10-15 mA active, giving sub-100 mW dissipation that the QFN handles without active cooling. Always verify EP-to-ground continuity with a 4-wire milliohm measurement during PCB QA.
Place 0.1 uF ceramic decoupling capacitors as close as possible (within 3 mm) to each VDD pin (pins 18 and 37), plus a bulk 10 uF tantalum or aluminum polymer capacitor near the IC. AVdd (pin 42) and AVss (pin 41) require an RC low-pass filter (10 ohm + 0.1 uF) to keep ADC reference noise below 1 LSB. The nanoWatt technology enables idle currents under 1 uA when peripherals are gated off - refer to datasheet section on Sleep modes for proper peripheral disable sequencing.
Route the ICSP pins RB6/PGC (pin 25) and RB7/PGD (pin 26) directly to a 6-pin header (0.1 inch pitch) for in-circuit programming and debug. Keep the trace length under 50 mm and add 4.7 kohm pullups to VDD on PGC/PGD to prevent programming glitches. The MCLR/VPP pin (pin 27) requires a 10 kohm pullup to VDD and a 100 nF capacitor to ground for in-circuit programming. Avoid running high-current traces under the QFN's exposed pad to maintain ground integrity.
Common pitfalls with the PIC18F4220T-I/ML include: (1) forgetting to configure the oscillator mode bits in CONFIG1H for the correct clock source, (2) leaving the WDT enabled in production firmware without periodic clear, causing unintended resets, (3) using ADC without adequate acquisition time leading to inaccurate conversions, and (4) failing to set the BOR (brown-out reset) voltage threshold to match 5V operation. Always set CONFIG2L with the proper BOR level and CONFIG1H with HS or XT oscillator mode for 40 MHz crystals.
규정 준수 정보
RoHS and REACH compliant per Microchip product page. Industrial temperature grade (-40 C to +85 C). Not AEC-Q100 qualified - choose PIC18F46K20 automotive variants for automotive applications.
