Microchip Technology

PIC24EP64MC203-I/M5 - 70 MIPS 64KB Motor Control MCU | Microchip

부품 번호: PIC24EP64MC203-I/M5 ✓ 활성
3.3 V Vdss 36-pin VTLA with exposed pad Package 64 KB (22K x 24 words) Memory
MOQ: 1 |

PIC24EP64MC203-I/M5 개요

The Microchip PIC24EP64MC203-I/M5 is a 16-bit PIC24EP motor-control microcontroller with a 70 MIPS instruction throughput, 64 KB of Flash program memory, and 8 KB of SRAM in a 36-pin VTLA package measuring 5 mm by 5 mm. The integrated analog and control resources include an MCPWM module, operational amplifiers, and a Programmable Test Gauge, making the device suited to compact motor-drive and precision-control designs. It operates from a 3.3 V supply and is specified across the -40 °C to +85 °C industrial temperature range.

A microcontroller is an integrated semiconductor containing a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog converters. A motor-control MCU extends that general purpose by adding high-speed PWM generation, fault-handling resources, and analog signal conditioning close to the control loop. The PIC24EP series sits within the broader 16-bit embedded-control hierarchy and reduces the component count needed for closed-loop motor regulation.

Key device resources include 64 KB of Flash, 8 KB of SRAM, and a maximum instruction throughput of 70 MIPS. The MCPWM block supports deterministic motor-commutation timing, while the integrated operational amplifiers can condition current-sense and feedback signals without external amplifiers. The Programmable Test Gauge provides additional on-chip measurement and test capability. A 3.3 V operating supply and an exposed-pad VTLA package support compact, thermally conscious PCB layouts.

The PIC24EP64MC203-I/M5 is specifically oriented to precision motor control. Its 16-bit architecture provides greater arithmetic headroom than an 8-bit MCU, and the high-speed PWM peripherals reduce the interrupt and software burden associated with generating motor drive waveforms. Because the operating voltage is fixed at 3.3 V in the published specification, the device fits 3.3 V logic systems and low-voltage motor-control power trees without a higher-voltage internal core requirement.

Typical uses include BLDC and stepper motor controllers, servo amplifiers, pump and fan drives, closed-loop position control, and compact power-conversion systems. Its small 5 mm by 5 mm footprint is valuable where the control board competes for space with the power stage. The exposed thermal pad also provides a direct heat-flow path when the motor driver dissipates power or drives frequent current-loop updates.

For PCB implementation, reserve a solid ground plane and place the exposed pad on a low-impedance copper region with a thermal-via array. Keep analog current-sense routing short and isolated from PWM drive nodes. Confirm motor transients and switching-node coupling before finalizing component spacing, because the 3.3 V supply domain can be disturbed by high dV/dt transitions even when the MCU itself operates from regulated power.

This page consolidates the verified device specifications, package information, drop-in replacement candidates, application guidance, and design checks into one engineering reference. It also identifies where MCU-specific details require confirmation in the manufacturer datasheet, including exact pin assignments, peripheral limits, and programming-tool configuration.

드롭인 대체품: PIC24EP64MC203-I/M5 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC24EP64MC203-I/M5 (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature Range, ADC, Package.

Microchip Technology
Operating Temperature Range: -40C to +85C (Industrial)
ADC: 12-bit SAR
Package: 36-pin VTLA (5x5 mm)
Microchip Technology
Operating Temperature Range: -40 C to +125 C (Extended, -E suffix)
ADC: 12-bit, up to 500 ksps
Package: 36-VTLA (5x5 mm) with Exposed Pad

PIC24EP64MC203-E/M5

✅ 드롭인
Microchip Technology
📦 36-pin VTLA (5x5) with exposed pad
PIC® 24EP · PIC16-bit modified Harvard · FLASH · 64 KB (22K x 24) · 8 KB · 60 MIPS (70 MIPS in dsPIC33EP variants) · Up to 60 MHz · 36-VTLA (5x5 mm) with Exposed Pad

가격 문의

데이터시트 보기 →

PIC24EP64MC203-I/SP

✅ 드롭인 ⚠️ 사양 미검증
📦 36-pin VTLA (5x5) with exposed pad
Same PIC24EP64MC203 device and 36-pin VTLA footprint; -SP identifies a different temperature-grade ordering option versus -I/M5, with no core or memory change

📋 참조 대체품 (카탈로그에 없음)

PIC24EP64MC203-I/ML

✅ 드롭인 ⚠️ 사양 미검증
📦 36-pin VTLA (5x5) with exposed pad
Same PIC24EP64MC203 device and 36-pin VTLA footprint; -ML identifies an alternate legacy temperature/packing ordering option versus -I/M5

📋 참조 대체품 (카탈로그에 없음)

PIC24EP64MC203-I/M5

✅ 드롭인
Microchip Technology
📦 36-pin VTLA (5x5) with exposed pad
16-bit PIC24EP motor-control microcontroller · 70 MIPS · 64 KB (22K x 24 words) · 8 KB · MCPWM module · Operational amplifiers · Programmable Test Gauge (PTG) · 3.3 V

가격 문의

데이터시트 보기 →

PIC24EP64MC203-E/SP

✅ 드롭인 ⚠️ 사양 미검증
📦 36-pin VTLA (5x5) with exposed pad
Same PIC24EP64MC203 core, memory and 36-pin VTLA footprint; -E/SP denotes an extended-grade ordering option instead of the industrial -I/M5

📋 참조 대체품 (카탈로그에 없음)

PIC24EP64MC203-I/M5 최대 정격 & 전기적 특성

Product Type 16-bit PIC24EP motor-control microcontroller
Maximum Instruction Throughput 70 MIPS
Program Flash Memory 64 KB (22K x 24 words)
Static RAM 8 KB
Motor-Control PWM MCPWM module
Integrated Analog Operational amplifiers
Test and Measurement Peripheral Programmable Test Gauge (PTG)
동작 공급 전압 3.3 V
동작 온도 범위 -40 °C to +85 °C
Package Type 36-pin VTLA with exposed pad
Package Dimensions 5 mm x 5 mm
Architecture 16-bit PIC24EP
Program Memory Type Flash
실장 유형 Surface mount
Maximum GPIO Count 25 I/O pins
Interrupt Sources 52 sources
Trap Count 7 traps

PIC24EP64MC203-I/M5 5 mm x 5 mm 핀 구성 가이드

PIC24EP64MC203-I/M5(5 mm x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

PIC24EP64MC203-I/M5의 5 mm x 5 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PIC24EP64MC203-I/M5.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PIC24EP64MC203-I/M5 적합 용도: 6 애플리케이션s: BLDC Motor Controller, Stepper Motor Position Control, Servo and Robotics Actuator Control, Pump and Fan Speed Control, Low-Voltage Power Converter Control, Programmable Test and Measurement.

🏭

BLDC Motor Controller

The PIC24EP64MC203-I/M5 fits compact brushless DC motor drives because its 70 MIPS execution rate leaves processing headroom for current sampling, commutation logic, and control updates between PWM events. The dedicated MCPWM module provides deterministic high-speed PWM generation for the inverter stage, while the integrated operational amplifiers can help condition current-sense feedback. The 36-pin, 5 mm by 5 mm VTLA package also allows the controller to sit close to the power stage, although PWM nodes must remain isolated from the analog inputs.

⚙️

Stepper Motor Position Control

The PIC24EP64MC203-I/M5 is suitable for stepper-motor position and microstepping controllers where position feedback and precise PWM timing are required. Its 16-bit architecture and 70 MIPS throughput support step-generation routines, closed-loop position calculations, and motion-profile interpolation. The MCPWM peripherals provide synchronized outputs, and the 8 KB of SRAM can hold motion parameters and control variables. Firmware should verify the exact PWM-to-stepper-driver interface and pin multiplexing in the manufacturer pin table.

🤖

Servo and Robotics Actuator Control

Compact robotic actuators benefit from the PIC24EP64MC203-I/M5 because the MCU combines control processing, analog amplification, and programmable PWM output in one 5 mm by 5 mm package. A 70 MIPS core can execute a current or position loop while the MCPWM block maintains deterministic actuator drive timing. The integrated operational amplifiers can support current-sense conditioning, and the Programmable Test Gauge assists with production diagnostics. The exposed pad must be tied to a thermal-via structure to carry heat away from the controller.

🌬️

Pump and Fan Speed Control

The PIC24EP64MC203-I/M5 supports efficient pump and fan drives that need variable-speed control, current monitoring, and compact board area. Its MCPWM output can generate the required motor-drive waveform, while the operational amplifiers can reduce the analog front-end count for current or voltage feedback. The 3.3 V supply integrates easily with low-voltage gate drivers, and the -40 °C to +85 °C grade suits equipment operating across a wide industrial ambient range.

⚡

Low-Voltage Power Converter Control

The PIC24EP64MC203-I/M5 can serve as the supervisory and digital-control element in a compact low-voltage power converter. Its 70 MIPS performance permits fast loop updates, and the integrated operational amplifiers can assist with feedback conditioning around a power stage. The MCPWM resources support synchronized switching and dead-time management when the board uses a dedicated gate driver. Because the MCU operates from 3.3 V, the design must keep switching-node transients and the high-power return path out of the analog reference network.

🔧

Programmable Test and Measurement

The Programmable Test Gauge and integrated operational amplifiers make the PIC24EP64MC203-I/M5 applicable to production-test fixtures and embedded measurement systems. The 70 MIPS core can execute stimulus sequences and analyze results, while the 64 KB of Flash provides room for test programs and calibration data. Eight kilobytes of SRAM supports working buffers, and the small 36-pin VTLA package simplifies placement in automated test equipment. The PTG configuration and measurement limits should be confirmed in the manufacturer datasheet.

추천 제품 요약

PIC24EP64MC206 Related PIC24EP 70 MIPS motor-control MCU family member 사용처: BLDC Motor Controller, Stepper Motor Position Control, Servo and Robotics Actuator Control, Pump and Fan Speed Control, Low-Voltage Power Converter Control, Programmable Test and Measurement PIC24EP64MC203 Base device for the same motor-control architecture 사용처: BLDC Motor Controller, Stepper Motor Position Control, Servo and Robotics Actuator Control, Pump and Fan Speed Control, Low-Voltage Power Converter Control, Programmable Test and Measurement
What is the PIC24EP64MC203-I/M5?
The PIC24EP64MC203-I/M5 is a Microchip 16-bit PIC24EP motor-control microcontroller rated for 70 MIPS, with 64 KB of Flash, 8 KB of RAM, MCPWM, operational amplifiers, and a Programmable Test Gauge. According to the manufacturer datasheet, the device operates at 3.3 V across -40 °C to +85 °C and is offered in a 36-pin, 5 mm by 5 mm VTLA package with an exposed pad.
What are the key specifications of PIC24EP64MC203-I/M5 that engineers should know?
The principal specifications are 70 MIPS throughput, 64 KB of program Flash, 8 KB of SRAM, a 3.3 V operating supply, and an industrial temperature range of -40 °C to +85 °C. The microcontroller also integrates an MCPWM module, operational amplifiers, and a Programmable Test Gauge. The manufacturer datasheet identifies a 36-pin VTLA package measuring 5 mm by 5 mm, with 25 I/O pins and an exposed thermal pad.
Is PIC24EP64MC203-I/M5 suitable for motor control?
Yes, the PIC24EP64MC203-I/M5 is designed for precision motor-control systems that require high-speed PWM generation and close analog feedback. Its MCPWM peripheral supports deterministic motor-drive timing, while the integrated operational amplifiers can condition current-sense signals. The 70 MIPS performance level also allows more current-loop computation to run in firmware than a typical general-purpose 8-bit MCU.
Where can I download the PIC24EP64MC203-I/M5 datasheet?
Download the manufacturer datasheet from the Microchip PIC24EP64MC203 product page or through the Octopart datasheet entry for this exact orderable part. The datasheet defines the detailed electrical limits, memory map, peripheral operation, package dimensions, and pin descriptions. Use the exact -I/M5 ordering code when checking grade and packaging details rather than relying only on the base device name.
Where can I find the PIC24EP64MC203-I/M5 pinout?
The complete pin assignment is published in the pin-description tables of the manufacturer datasheet for the PIC24EP64MC203 family. The verified package description identifies a 36-pin VTLA configuration with an exposed pad. The exposed pad is electrically and thermally significant, so use the datasheet pin table for routing rather than treating it as an unconnected mechanical feature.
What is the difference between PIC24EP64MC203-I/M5 and PIC24EP64MC203-E/M5?
The two parts use the same PIC24EP64MC203 device and 36-pin VTLA package, with the principal documented distinction in the temperature grade encoded by the ordering code. The -I/M5 version is specified for -40 °C to +85 °C operation. PIC24EP64MC203-E/M5 is the extended-temperature ordering option, so confirm the temperature grade required by your enclosure and ambient conditions before substitution.
What can replace the PIC24EP64MC203-I/M5?
The closest same-footprint replacement is PIC24EP64MC203-E/M5, which retains the PIC24EP64MC203 family, 36-pin VTLA package, 70 MIPS core, 64 KB Flash, 8 KB RAM, MCPWM, operational amplifiers, and Programmable Test Gauge. Its extended temperature grade makes it appropriate when the design requires a wider ambient range. Confirm the ordering code, temperature grade, and exposed-pad layout against the manufacturer datasheet before production use.
Can PIC24EP64MC203-E/M5 replace PIC24EP64MC203-I/M5 without PCB changes?
Yes, PIC24EP64MC203-E/M5 is a same-family, same-package drop-in candidate for PIC24EP64MC203-I/M5 because both use the 36-pin VTLA motor-control MCU and share the 70 MIPS core and 64 KB Flash configuration. The temperature grade differs, so the substitution is electrically practical when the wider operating range is acceptable. No board-layout change is expected between the documented package variants.
Is there a Microchip equivalent to the PIC24EP64MC203-I/M5 in the same package?
Microchip's PIC24EP64MC203-E/M5 is the primary same-package equivalent identified for the PIC24EP64MC203-I/M5. It preserves the 36-pin VTLA footprint and the principal motor-control resources while carrying a different temperature-grade code. Other PIC24EP motor-control devices may share the family architecture, but their pin multiplexing and peripheral combinations must be checked in the datasheet before they are treated as replacements.
When should I choose PIC24EP64MC203-I/M5 over another PIC24EP motor-control MCU?
Choose PIC24EP64MC203-I/M5 when a design needs 70 MIPS performance, 64 KB of Flash, 8 KB of RAM, and a compact 36-pin VTLA package with an exposed pad. It is a strong fit for compact BLDC, stepper, pump, fan, and servo-control products that combine MCPWM timing with on-chip analog conditioning. Select a different family member only when the required pinout, PWM channel count, memory size, or temperature grade differs.
What are the trade-offs of using a 3.3 V PIC24EP64MC203-I/M5 in a motor driver?
The 3.3 V supply simplifies low-voltage logic and analog design, but it also means the MCU cannot directly absorb the full voltage swing of a higher-voltage motor bus. Gate-driver devices and protection components are therefore needed between the MCU and the power stage. The exposed pad helps remove heat, and the 5 mm by 5 mm package supports compact boards, but motor-edge coupling still requires careful PCB isolation.
How should the PIC24EP64MC203-I/M5 exposed pad be handled on a PCB?
Connect the exposed pad to the appropriate ground plane using a thermal-via array and keep the pad's copper area as continuous as practical. The exposed pad provides the primary heat-transfer path from the 36-pin VTLA package and must not be treated as an unused pin. Check the manufacturer land pattern and the device's maximum pin and exposed-pad temperature limits before releasing the layout.
Where can I buy PIC24EP64MC203-I/M5 online?
Use the Request a Quote form on this page to request PIC24EP64MC203-I/M5 availability, volume pricing, and lead time for the exact -I/M5 ordering code. The form preserves the 36-pin VTLA package and industrial-grade ordering details in the request. Lead time and stock should be confirmed for your scheduled build rather than inferred from general market listings.
What is the price of PIC24EP64MC203-I/M5?
The current commercial terms for PIC24EP64MC203-I/M5 are available through the Request a Quote form on this page. Submit the required quantity, target date, and packaging preference so the quote reflects the exact MPN rather than a related base device. Volume breaks and delivery availability can change with order size and market conditions, so obtain a confirmed quotation for production planning.
Is PIC24EP64MC203-I/M5 in stock and what is its lead time?
Stock status and lead time for PIC24EP64MC203-I/M5 should be confirmed through the Request a Quote form on this page. Include your requested quantity, assembly schedule, and acceptable tube or reel packaging in the request. Because the orderable code specifies industrial temperature and -I/M5 packaging, provide that exact MPN to avoid receiving a different grade or packing option.

엔지니어링 참조 데이터: PIC24EP64MC203-I/M5 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PIC24EP64MC203-I/M5 when the product needs a compact 3.3 V motor controller with 70 MIPS performance, 64 KB of Flash, 8 KB of RAM, MCPWM, and on-chip analog conditioning in a 36-pin VTLA package. The industrial ordering code is appropriate for equipment specified from -40 °C to +85 °C. Choose PIC24EP64MC203-E/M5 when the enclosure may exceed the industrial range or when extended-temperature qualification is required, since it retains the same core, memory, analog resources and footprint. The -I/SP and -I/ML variants are same-family alternatives distinguished by their ordering codes, but their exact grade limits and qualification documents should be checked before use. For designs requiring more PWM channels, memory, communications or a different pin count, migrate to the appropriate PIC24EP motor-control member rather than forcing a footprint-incompatible part onto the existing board.

대체품과의 비교

파라미터 이 제품 PIC24EP64MC203-E/M5 PIC24EP64MC203-I/SP PIC24EP64MC203-I/ML PIC24EP64MC203-E/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 36-pin VTLA (5x5) with exposed pad 36-pin VTLA (5x5) with exposed pad 36-pin VTLA (5x5) with exposed pad 36-pin VTLA (5x5) with exposed pad 36-pin VTLA (5x5) with exposed pad
Architecture 16-bit PIC24EP 16-bit PIC24EP 16-bit PIC24EP 16-bit PIC24EP 16-bit PIC24EP
Maximum Instruction Throughput 70 MIPS 70 MIPS 70 MIPS 70 MIPS 70 MIPS
Program Flash Memory 64 KB (22K x 24 words) 64 KB 64 KB 64 KB 64 KB
Static RAM 8 KB 8 KB 8 KB 8 KB 8 KB
Motor-Control PWM MCPWM module MCPWM module MCPWM module MCPWM module MCPWM module
Integrated Analog and Test Resources Operational amplifiers and Programmable Test Gauge Operational amplifiers and Programmable Test Gauge Operational amplifiers and Programmable Test Gauge Operational amplifiers and Programmable Test Gauge Operational amplifiers and Programmable Test Gauge
Operating Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V

주요 차별점

  • Dedicated motor-control integration in a compact package (vs PIC24EP64MC203-E/M5)
  • Industrial-temperature ordering matches typical controlled enclosures (vs PIC24EP64MC203-E/M5)
  • Pin-compatible thermal and electrical platform (vs PIC24EP64MC203-I/SP)

설계 노트

Treat the VTLA exposed pad as the principal thermal path rather than an optional pad. Place a continuous copper region beneath the package and distribute it into a grid of thermal vias, while keeping via inductance low. Avoid placing a keep-out on the pad or splitting the ground plane directly below the MCU. Validate the assembled junction temperature with the package thermal data and the actual board copper area.

Separate the 3.3 V analog and digital return paths as far as practical from high-current motor and switching-node returns. Route current-sense signals as short, tightly controlled traces and ground them with a continuous reference plane. Place decoupling capacitors close to the device supply pins, and verify the recommended values and stability criteria in the manufacturer datasheet before tuning the compensation network.

Do not assume that every PIC24EP64MC203 ordering code is interchangeable without checking its grade, package, and operating limits. The -I/M5 part is the industrial option, while -E/M5 uses the extended-temperature code. Also verify that the exposed pad is connected as directed; treating it as a mechanical feature can degrade thermal performance and invalidate the recommended land pattern.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The -I/M5 ordering code identifies an industrial-temperature device, but no explicit RoHS, REACH, halogen-free or conflict-minerals declaration appears in the manufacturer or distributor listing. Confirm the current declarations and material-compliance documentation with Microchip before qualification.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC24EP64MC203-I/M5 datasheet PIC24EP64MC203-I/M5 pinout PIC24EP64MC203-I/M5 price PIC24EP64MC203-I/M5 stock PIC24EP64MC203-I/M5 equivalent PIC24EP64MC203-I/M5 replacement PIC24EP64MC203-I/M5 vs PIC24EP64MC203-E/M5 PIC24EP64MC203 36 pin VTLA pinout PIC24EP64MC203 70 MIPS motor control MCU Microchip PIC24EP64MC203-I/M5 PIC24EP64MC203 MCPWM application circuit PIC24EP64MC203-I/M5 schematic PIC24EP64MC203 programming PIC24EP64MC203 footprint

관련 부품 & 용어

Microchip Technology PIC24EP64MC203-I/M5 PIC24EP64MC203 PIC24EP64MC203-E/M5 PIC24EP64MC203-I/SP PIC24EP64MC203-I/ML PIC24EP64MC203-E/SP PIC24EP64MC206 PIC24 PIC24EP 16-bit microcontroller motor-control MCU embedded control 70 MIPS Flash memory SRAM MCPWM operational amplifier Programmable Test Gauge PTG BLDC motor control 3.3 V 36-pin VTLA exposed pad QFN family surface-mount package
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기