PIC32MX664F064LT-I/BG - 80MHz 32-bit MCU, 64KB Flash, USB/Ethernet, 121-TFBGA
부품 번호: PIC32MX664F064LT-I/BG ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.52 | $6.52 |
| 10 | $6.13 | $61.30 |
| 100 | $5.61 | $561.00 |
| 500 | $5.21 | $2,605.00 |
| 1,000 | $4.83 | $4,830.00 |
PIC32MX664F064LT-I/BG 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and configurable peripherals onto one die, forming the smallest addressable computing unit in an embedded system. The PIC32MX family sits in Microchip's mid-range 32-bit MCU portfolio, slotting above the PIC24/dsPIC families and below the Cortex-M-class PIC32MZ/MK families in performance and price. Within this taxonomy, the PIC32MX664F064LT-I/BG belongs to the "MX664" sub-line that specifically targets connected-embedded applications requiring both USB device/host and Ethernet connectivity on the same silicon.
Key features of this device include a 32-bit MIPS M4K core with single-cycle multiply and hardware divide, 64 KB single-voltage Flash, 32 KB SRAM, 53 GPIO, four DMA channels, two I2C, two SPI, two UART, USB 2.0 Full-Speed OTG, 10/100 Ethernet MAC (requires external PHY), 16-channel 10-bit ADC, five 16-bit timers/counters, real-time clock, and a 16-bit parallel master port. The operating voltage range is 2.3 V to 3.6 V, and the industrial temperature range of -40 C to +85 C (denoted by the "I" suffix) covers harsh embedded environments.
The PIC32MX664F064LT-I/BG utilizes the MIPS M4K core architecture with separate 32-bit instruction and data paths, a 5-stage pipeline, and a hardware multiply/divide unit that delivers 1.56 DMIPS/MHz. The 121-ball TFBGA package (BG suffix) supports the highest pin-count option in this family, exposing all peripherals and the full 53 GPIO without pin reuse conflicts, and is targeted at space-constrained surface-mount designs.
Typical applications include industrial Ethernet gateways, USB-to-UART bridges, home-automation controllers, embedded web servers, networked sensor hubs, point-of-sale terminals, and connected medical devices. The combination of integrated Ethernet MAC and USB OTG on one device is uncommon in this price tier and makes the part especially attractive for low-cost IoT edge nodes.
When designing with this part, allocate adequate PCB area for the BGA breakout, ensure proper decoupling (one 0.1 uF per power pin is recommended), and verify that the selected external Ethernet PHY is RMII/MII-compatible with the MX5/6/7 MAC interface. For users migrating from PIC24 or earlier PIC32MX3/4 devices, the peripheral library in MPLAB Harmony provides drop-in driver compatibility.
드롭인 대체품: PIC32MX664F064LT-I/BG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX664F064LT-I/BG (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, DMA Channels, Ethernet, Timers.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MX664F064L-I/BG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX664F064L-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.21 / 개
데이터시트 보기 →PIC32MX564F064L-I/BG
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.45 / 개
데이터시트 보기 →PIC32MX564F128LT-I/BG
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC32MX460F512L-80V/BG
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.1 / 개
데이터시트 보기 →PIC32MX575F512LT-80I/BG
✅ 드롭인✓ 재고 있음
$6.25 / 개
데이터시트 보기 →PIC32MX460F512L-80V/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$9.8 / 개
데이터시트 보기 →PIC32MX664F064LT-I/BG 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Maximum CPU Clock | 80 MHz |
| Performance | 1.56 DMIPS/MHz (MIPS M4K) |
| Program Flash Memory | 64 KB (64K x 8) |
| RAM | 32 KB (32K x 8) |
| Operating Voltage Range | 2.3 V to 3.6 V |
| 동작 온도 범위 | -40 C to +85 C (Industrial) |
| General-Purpose I/O | 53 |
| DMA Channels | 4 |
| USB | USB 2.0 Full-Speed On-The-Go (OTG) |
| Ethernet | 10/100 Mbit MAC (external PHY required) |
| ADC | 16-channel, 10-bit |
| Timers | 5 x 16-bit Timer/Counter |
| Communication Peripherals | 2x I2C, 2x SPI, 2x UART |
| Parallel Master Port | 16-bit PMP |
| 패키지 | 121-ball TFBGA, 10x10x1.20 mm |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
PIC32MX664F064LT-I/BG 121-ball tfbga, 10x10x1.20 mm 핀 구성 가이드
PIC32MX664F064LT-I/BG(121-ball tfbga, 10x10x1.20 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MX664F064LT-I/BG.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MX664F064LT-I/BG 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, USB Device/Host Bridge, Connected Home-Automation Controller, Embedded Web Server / HMI, Point-of-Sale (POS) Terminal, Networked Sensor Hub.
Industrial Ethernet Gateway
The PIC32MX664F064LT-I/BG is purpose-built for low-cost industrial Ethernet gateways because it integrates a 10/100 Ethernet MAC, USB OTG, and 53 GPIO on a single die. In a typical Modbus TCP-to-RTU gateway, the device runs the Microchip MLA TCP/IP stack on the M4K core at 80 MHz while the four DMA channels offload packet memory moves. The 121-TFBGA package keeps the design compact, while the -40 C to +85 C industrial temperature range tolerates factory-floor environments. Engineers pair the MCU with a KSZ8041 PHY and an isolated RJ-45 transformer module; the 32 KB RAM accommodates 8-16 simultaneous TCP sockets for sub-device polling without external memory.
추천
USB Device/Host Bridge
The integrated USB 2.0 Full-Speed OTG controller on PIC32MX664F064LT-I/BG makes it well suited for USB-to-UART, USB-to-SPI, or USB-to-I2C bridges. The 80 MHz MIPS M4K core handles USB protocol plus data forwarding at full-speed (12 Mbit/s) without taxing CPU cycles. The 53 GPIO accommodates auxiliary status LEDs, configuration straps, and external buffer enables. Compared to a discrete USB controller + MCU two-chip solution, this single-chip approach reduces BOM cost by roughly 30% and shrinks PCB area by 50%. Designers should add a 24 MHz crystal for USB clock accuracy and ESD protection diodes on D+/D- lines for field-deployable products.
추천
Connected Home-Automation Controller
For home-automation hubs that bridge Wi-Fi, Ethernet, and USB peripherals, the PIC32MX664F064LT-I/BG offers a balanced feature set: the Ethernet MAC connects to the home router, USB OTG supports an external Wi-Fi module (e.g., RN171) or a GSM dongle for cellular failover, and 53 GPIO drives relays, sensors, and keypad inputs. The 64 KB Flash hosts a custom automation state machine plus Microchip's Wi-Fi/TCP stacks. Power consumption is modest at 80 MHz, fitting always-on applications. Designers should use the 10-bit ADC for analog sensor reads (temperature, light) and reserve one I2C bus for an EEPROM storing configuration and scheduling data.
추천
Embedded Web Server / HMI
The 32-bit MIPS core at 80 MHz with 32 KB RAM runs an HTTP server with embedded HTML pages, REST APIs, or a tiny CGI engine for remote equipment management. The Ethernet MAC delivers reliable 10/100 connectivity while the 16-bit parallel master port (PMP) interfaces directly to character LCDs or graphic OLEDs for local HMI. With 53 GPIO available, designers can drive keypads, LEDs, and rotary encoders without external I/O expanders. The PIC32MX664F064LT-I/BG typically achieves 10-15 simultaneous HTTP sessions at full CPU utilization, making it suitable for light-duty equipment dashboards, but heavier stacks would require an MX7 or MX8 device.
추천
Point-of-Sale (POS) Terminal
The PIC32MX664F064LT-I/BG fits compact POS peripherals (card readers, NFC bridges, thermal printer controllers) where USB OTG communicates with a host tablet and Ethernet provides backend reporting. Its 10-bit ADC reads keypad or battery voltage while four DMA channels manage continuous barcode-scanner UART streaming without CPU intervention. The 121-TFBGA keeps the PCB small enough for handheld form factors, and the industrial temperature range supports deployment in semi-outdoor retail environments. A typical implementation uses 32 KB of the 64 KB Flash for the application and the remainder for a fail-safe bootloader supporting in-field firmware updates over USB or Ethernet.
추천
Networked Sensor Hub
For IoT edge sensor hubs aggregating analog and digital signals and pushing summaries to a cloud gateway via Ethernet, the PIC32MX664F064LT-I/BG provides the right mix: 16-channel 10-bit ADC captures analog sensors, two I2C buses connect digital sensors, and the Ethernet MAC uploads pre-processed data. The four DMA channels enable simultaneous ADC scanning and SPI sensor reads without CPU involvement, freeing the M4K core for filtering and aggregation algorithms. With 32 KB RAM, the device can buffer up to 4 KB of time-series data before transmitting, smoothing out network jitter. Compared to 8-bit MCU hubs, the 32-bit performance reduces latency by 3-5x and supports on-board TLS.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX664F064LT-I/BG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX664F064L-I/BG | PIC32MX564F064L-I/BG | PIC32MX460F512L-80V/BG | PIC32MX575F512LT-80I/BG | PIC32MX564F128LT-I/BG |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 121-TFBGA (10x10) | 121-TFBGA (10x10) - same | 121-TFBGA (10x10) - same | 121-TFBGA (10x10) - same | 121-TFBGA (10x10) - same | 121-TFBGA (10x10) - same |
| Core | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz | MIPS32 M4K, 80 MHz |
| Flash | 64 KB | 64 KB | 64 KB | 512 KB | 512 KB | 128 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB | 32 KB |
| Ethernet MAC | 10/100 (integrated) | 10/100 (integrated) | No | 10/100 (integrated) | No | No |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS device only | USB 2.0 FS OTG | USB 2.0 FS OTG |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
| Temperature Range | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +105 C | -40 C to +85 C | -40 C to +85 C |
주요 차별점
- Single-chip USB OTG plus 10/100 Ethernet MAC integration (vs PIC32MX564F064LT-I/BG)
- Right-sized 64 KB Flash / 32 KB RAM for cost-sensitive connected designs (vs PIC32MX460F512L-80V/BG)
- Industrial temperature range with full peripheral set (vs PIC32MX575F512LT-80I/BG)
설계 노트
The 121-ball TFBGA package has a 0.8 mm ball pitch, which requires 4-layer PCB with microvia-in-pad or HDI stack-up for reliable assembly. Place at least one 0.1 uF decoupling capacitor per VDD/VSS pair as close to the balls as the breakout allows. Add a 10 uF bulk tantalum or ceramic capacitor near the package. The BG package has no exposed thermal pad; thermal dissipation is through the balls to internal planes. For designs above 500 mW, route a copper flood under the BGA and stitch with thermal vias to the inner ground plane.
Use a low-noise 3.3 V LDO such as the MCP1700-3302E for the MCU core supply. The PIC32MX664F064LT-I/BG draws approximately 70 mA active at 80 MHz with all peripherals on, plus 10-15 mA peak for USB and Ethernet MAC transmit bursts. A 3.3 V rail rated at 200 mA with 50 mV peak-to-peak ripple is sufficient. Add a 4.7 uF bulk capacitor on the 3.3 V rail close to the MCU. For USB applications, the VUSB pin requires its own 0.47 uF decoupling capacitor and may be powered from the USB cable or tied to VDD per application requirement.
Do not assume any TFBGA ball labeled NC is truly disconnected - some balls marked NC on early datasheet revisions were repurposed in later silicon revisions. Always re-verify against the latest datasheet. A common mistake is using a 25 MHz crystal for USB applications; the PIC32MX664F064LT-I/BG requires a 24 MHz crystal when USB is enabled because the USB clock divider must produce exactly 48 MHz. Also, when migrating from the PIC32MX3/4 family, the Ethernet MAC register definitions changed - do not blindly reuse code.
Keep the 24 MHz crystal traces short and symmetric, with the load capacitors (typically 18-22 pF) placed within 3 mm of the OSC1/OSC2 balls. For Ethernet, route the RMII or MII differential pairs (TX+/TX-, RX+/RX-) with 100 ohm differential impedance and length matching within 2 mm. Place the PHY close to the RJ-45 connector and place common-mode chokes on the MII signals. Keep the 50 MHz RMII reference clock trace short and routed away from switching power or USB data lines to avoid coupling noise into the Ethernet receiver.
규정 준수 정보
Compliant with RoHS and REACH per Microchip product environmental compliance disclosures. The -I suffix indicates the industrial temperature grade (-40 C to +85 C), not an automotive qualification. AEC-Q100 is not applicable for this part; automotive designs should consider PIC32MX variants with -V or Q-suffixed part numbers.
