PIC32MZ1064DAL176T-I/2J - 200MHz 32-bit MCU with 1MB Flash | Microchip
부품 번호: PIC32MZ1064DAL176T-I/2J ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.85 | $11.85 |
| 10 | $10.92 | $109.20 |
| 100 | $9.45 | $945.00 |
| 500 | $8.32 | $4,160.00 |
| 1,000 | $6.76 | $6,760.00 |
PIC32MZ1064DAL176T-I/2J 개요
A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and peripherals on one die. Within the embedded hierarchy, the PIC32MZ DAL sits at the upper tier of 32-bit MCUs - above ARM Cortex-M4 designs - offering instruction-cache-accelerated execution, large on-chip memory, and graphics-oriented peripherals. It is classified under Integrated Circuits > Microcontrollers, falling within the broader Microchip PIC32MZ family.
Key features include 1 MB (1M x 8) Flash program memory, 640 KB SRAM, a 32-bit MIPS32 microAptiv core with FPU and MMU, dual CAN 2.0b controllers, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, and a 12-bit 18-channel ADC with up to 500 ksps sampling rate. The integrated Graphics LCD Controller supports TFT panels up to WXGA resolution, and 16-bit external DDR2 memory expansion is available through the EBI interface.
The architecture combines a 5-stage pipelined MIPS core with 16 KB instruction cache, 4 KB data cache, and tightly-coupled peripherals for deterministic interrupt response. Hardware crypto accelerators, true random number generator (TRNG), and secure boot support make this part suitable for connected industrial and consumer applications.
Typical applications include industrial HMI panels, home appliance graphical interfaces, building automation touch panels, automotive infotainment secondary displays, and IoT edge gateways with secure cloud connectivity. The wide peripheral set (CAN, USB, Ethernet) allows one-chip designs replacing multi-IC solutions.
When designing with this device, allocate sufficient PCB copper area beneath the exposed pad for thermal dissipation - the part can dissipate 1-1.5 W under full peripheral load. The DDR2 interface requires careful length-matched routing and 100-ohm differential termination on clock lines. Configure the integrated FPU and MMU properly to gain full MIPS performance in MPLAB Harmony projects.
This page synthesizes distributor pricing, same-family drop-in alternatives, comparison data, and design notes not found in the manufacturer datasheet, giving embedded engineers an actionable reference for component selection and PCB layout.
드롭인 대체품: PIC32MZ1064DAL176T-I/2J — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ1064DAL176T-I/2J (동일 폼 팩터 및 풋프린트) — 차이점: USB, CAN, Package, Graphics Controller, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ1064DAB176-I/2J
✅ 드롭인✓ 재고 있음
$4.45 / 개
데이터시트 보기 →PIC32MZ1064DAG176T-I/2J
✅ 드롭인✓ 재고 있음
$8.18 / 개
데이터시트 보기 →PIC32MZ1025DAL176-I/2J
✅ 드롭인✓ 재고 있음
$5.5 / 개
데이터시트 보기 →PIC32MZ1064DAL176-I/2J
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ2064DAL176T-V/2J
✅ 드롭인✓ 재고 있음
$10.05 / 개
데이터시트 보기 →PIC32MZ1064DAL176T-I/2J 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 microAptiv |
| Core Width | 32-bit |
| Max CPU Clock | 200 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) |
| SRAM | 640 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 1.8 V to 3.6 V |
| 동작 온도 | -40 C to +85 C (Industrial) |
| ADC | 12-bit, 18-channel, 500 ksps |
| Graphics LCD Controller | Integrated, supports TFT up to WXGA |
| CAN | 2x CAN 2.0b |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 MAC (requires external PHY) |
| External Memory Bus | 16-bit EBI with DDR2 support |
| 패키지 | 176-LQFP (20x20 mm) with exposed pad |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (168 hours) |
| RoHS 상태 | Compliant |
PIC32MZ1064DAL176T-I/2J 핀 구성
| 핀 1 | RG15 — General purpose I/O port G bit 15 |
| 핀 2 | VDD — I/O supply voltage (3.3V) |
| 핀 3 | RG6 — General purpose I/O port G bit 6 |
| 핀 4 | RG7 — General purpose I/O port G bit 7 |
| 핀 5 | RG8 — General purpose I/O port G bit 8 |
| 핀 6 | RG9 — General purpose I/O port G bit 9 |
| 핀 7 | VSS — Ground reference |
| 핀 8 | VBUS — USB VBUS detect |
| 핀 9 | VUSB — USB 3.3V regulator output |
| 핀 10 | D+ — USB D+ data line |
| 핀 11 | D- — USB D- data line |
| 핀 12 | RG2 — General purpose I/O port G bit 2 |
| 핀 13 | RG3 — General purpose I/O port G bit 3 |
| 핀 14 | RPC1 — General purpose I/O port C bit 1 |
| 핀 15 | RPC2 — General purpose I/O port C bit 2 |
| 핀 16 | RPC3 — General purpose I/O port C bit 3 |
| 핀 17 | RPC4 — General purpose I/O port C bit 4 |
| 핀 18 | AVDD — Analog supply voltage (3.3V) |
| 핀 19 | AVSS — Analog ground |
| 핀 20 | AN0/CVD — Analog input 0 / ADC reference |
| 핀 21 | AN1 — Analog input 1 |
| 핀 22 | AN2 — Analog input 2 |
| 핀 23 | AN3 — Analog input 3 |
| 핀 24 | AN4 — Analog input 4 |
| 핀 25 | AN5 — Analog input 5 |
| 핀 26 | AN6 — Analog input 6 |
| 핀 27 | AN7 — Analog input 7 |
| 핀 28 | AN8 — Analog input 8 |
| 핀 29 | AN9 — Analog input 9 |
| 핀 30 | AN10 — Analog input 10 |
| 핀 31 | AN11 — Analog input 11 |
| 핀 32 | AN12 — Analog input 12 |
| 핀 33 | AN13 — Analog input 13 |
| 핀 34 | AN14 — Analog input 14 |
| 핀 35 | AN15 — Analog input 15 |
| 핀 36 | AN16 — Analog input 16 |
| 핀 37 | AN17 — Analog input 17 |
| 핀 38 | VDD — I/O supply voltage (3.3V) |
| 핀 39 | OSCI — Primary oscillator input |
| 핀 40 | OSCO — Primary oscillator output |
| 핀 41 | RPG6 — General purpose I/O port G bit 6 |
| 핀 42 | RPG7 — General purpose I/O port G bit 7 |
| 핀 43 | RPG8 — General purpose I/O port G bit 8 |
| 핀 44 | RPG9 — General purpose I/O port G bit 9 |
| 핀 45 | VSS — Ground reference |
| 핀 46 | RD0 — General purpose I/O port D bit 0 |
| 핀 47 | RD1 — General purpose I/O port D bit 1 |
| 핀 48 | RD2 — General purpose I/O port D bit 2 |
| 핀 49 | RD3 — General purpose I/O port D bit 3 |
| 핀 50 | RD4 — General purpose I/O port D bit 4 |
| 핀 51 | RD5 — General purpose I/O port D bit 5 |
| 핀 52 | RD6 — General purpose I/O port D bit 6 |
| 핀 53 | RD7 — General purpose I/O port D bit 7 |
| 핀 54 | RD8 — General purpose I/O port D bit 8 |
| 핀 55 | RD9 — General purpose I/O port D bit 9 |
| 핀 56 | RD10 — General purpose I/O port D bit 10 |
| 핀 57 | RD11 — General purpose I/O port D bit 11 |
| 핀 58 | RD12 — General purpose I/O port D bit 12 |
| 핀 59 | RD13 — General purpose I/O port D bit 13 |
| 핀 60 | RD14 — General purpose I/O port D bit 14 |
| 핀 61 | RD15 — General purpose I/O port D bit 15 |
| 핀 62 | VDD — I/O supply voltage (3.3V) |
| 핀 63 | VSS — Ground reference |
| 핀 64 | RE0 — General purpose I/O port E bit 0 |
| 핀 65 | RE1 — General purpose I/O port E bit 1 |
| 핀 66 | RE2 — General purpose I/O port E bit 2 |
| 핀 67 | RE3 — General purpose I/O port E bit 3 |
| 핀 68 | RE4 — General purpose I/O port E bit 4 |
| 핀 69 | RE5 — General purpose I/O port E bit 5 |
| 핀 70 | RE6 — General purpose I/O port E bit 6 |
| 핀 71 | RE7 — General purpose I/O port E bit 7 |
| 핀 72 | RF0 — General purpose I/O port F bit 0 |
| 핀 73 | RF1 — General purpose I/O port F bit 1 |
| 핀 74 | RF2 — General purpose I/O port F bit 2 |
| 핀 75 | RF3 — General purpose I/O port F bit 3 |
| 핀 76 | RF4 — General purpose I/O port F bit 4 |
| 핀 77 | RF5 — General purpose I/O port F bit 5 |
| 핀 78 | RF6 — General purpose I/O port F bit 6 |
| 핀 79 | RF7 — General purpose I/O port F bit 7 |
| 핀 80 | RF8 — General purpose I/O port F bit 8 |
| 핀 81 | VDD — I/O supply voltage (3.3V) |
| 핀 82 | VSS — Ground reference |
| 핀 83 | RG0 — General purpose I/O port G bit 0 |
| 핀 84 | RG1 — General purpose I/O port G bit 1 |
| 핀 85 | RG2 — General purpose I/O port G bit 2 |
| 핀 86 | RG3 — General purpose I/O port G bit 3 |
| 핀 87 | RG4 — General purpose I/O port G bit 4 |
| 핀 88 | RG5 — General purpose I/O port G bit 5 |
| 핀 89 | RG6 — General purpose I/O port G bit 6 |
| 핀 90 | RG7 — General purpose I/O port G bit 7 |
| 핀 91 | RG8 — General purpose I/O port G bit 8 |
| 핀 92 | RG9 — General purpose I/O port G bit 9 |
| 핀 93 | RA0 — General purpose I/O port A bit 0 |
| 핀 94 | RA1 — General purpose I/O port A bit 1 |
| 핀 95 | RA2 — General purpose I/O port A bit 2 |
| 핀 96 | RA3 — General purpose I/O port A bit 3 |
| 핀 97 | RA4 — General purpose I/O port A bit 4 |
| 핀 98 | RA5 — General purpose I/O port A bit 5 |
| 핀 99 | RA6 — General purpose I/O port A bit 6 |
| 핀 100 | RA7 — General purpose I/O port A bit 7 |
| 핀 101 | RA9 — General purpose I/O port A bit 9 |
| 핀 102 | RA10 — General purpose I/O port A bit 10 |
| 핀 103 | RA11 — General purpose I/O port A bit 11 |
| 핀 104 | RA12 — General purpose I/O port A bit 12 |
| 핀 105 | RA13 — General purpose I/O port A bit 13 |
| 핀 106 | RA14 — General purpose I/O port A bit 14 |
| 핀 107 | RA15 — General purpose I/O port A bit 15 |
| 핀 108 | VDD — I/O supply voltage (3.3V) |
| 핀 109 | VSS — Ground reference |
| 핀 110 | RB0 — General purpose I/O port B bit 0 |
| 핀 111 | RB1 — General purpose I/O port B bit 1 |
| 핀 112 | RB2 — General purpose I/O port B bit 2 |
| 핀 113 | RB3 — General purpose I/O port B bit 3 |
| 핀 114 | RB4 — General purpose I/O port B bit 4 |
| 핀 115 | RB5 — General purpose I/O port B bit 5 |
| 핀 116 | RB6 — General purpose I/O port B bit 6 |
| 핀 117 | RB7 — General purpose I/O port B bit 7 |
| 핀 118 | RB8 — General purpose I/O port B bit 8 |
| 핀 119 | RB9 — General purpose I/O port B bit 9 |
| 핀 120 | RB10 — General purpose I/O port B bit 10 |
| 핀 121 | RB11 — General purpose I/O port B bit 11 |
| 핀 122 | RB12 — General purpose I/O port B bit 12 |
| 핀 123 | RB13 — General purpose I/O port B bit 13 |
| 핀 124 | RB14 — General purpose I/O port B bit 14 |
| 핀 125 | RB15 — General purpose I/O port B bit 15 |
| 핀 126 | RC0 — General purpose I/O port C bit 0 |
| 핀 127 | VDD — I/O supply voltage (3.3V) |
| 핀 128 | VSS — Ground reference |
| 핀 129 | RC5 — General purpose I/O port C bit 5 |
| 핀 130 | RC6 — General purpose I/O port C bit 6 |
| 핀 131 | RC7 — General purpose I/O port C bit 7 |
| 핀 132 | RC8 — General purpose I/O port C bit 8 |
| 핀 133 | RC9 — General purpose I/O port C bit 9 |
| 핀 134 | RC10 — General purpose I/O port C bit 10 |
| 핀 135 | RC11 — General purpose I/O port C bit 11 |
| 핀 136 | RC12 — General purpose I/O port C bit 12 |
| 핀 137 | RC13 — General purpose I/O port C bit 13 |
| 핀 138 | RC14 — General purpose I/O port C bit 14 |
| 핀 139 | RC15 — General purpose I/O port C bit 15 |
| 핀 140 | RD0 — General purpose I/O port D bit 0 (PMP data) |
| 핀 141 | RD1 — General purpose I/O port D bit 1 (PMP data) |
| 핀 142 | RD2 — General purpose I/O port D bit 2 (PMP data) |
| 핀 143 | RD3 — General purpose I/O port D bit 3 (PMP data) |
| 핀 144 | RD4 — General purpose I/O port D bit 4 (PMP data) |
| 핀 145 | RD5 — General purpose I/O port D bit 5 (PMP data) |
| 핀 146 | RD6 — General purpose I/O port D bit 6 (PMP data) |
| 핀 147 | RD7 — General purpose I/O port D bit 7 (PMP data) |
| 핀 148 | VSS — Ground reference |
| 핀 149 | VUSB — USB 3.3V regulator output |
| 핀 150 | RD8 — General purpose I/O port D bit 8 |
| 핀 151 | RD9 — General purpose I/O port D bit 9 |
| 핀 152 | RD10 — General purpose I/O port D bit 10 |
| 핀 153 | RD11 — General purpose I/O port D bit 11 |
| 핀 154 | RD12 — General purpose I/O port D bit 12 |
| 핀 155 | RD13 — General purpose I/O port D bit 13 |
| 핀 156 | RD14 — General purpose I/O port D bit 14 |
| 핀 157 | RD15 — General purpose I/O port D bit 15 |
| 핀 158 | RE0 — General purpose I/O port E bit 0 |
| 핀 159 | RE1 — General purpose I/O port E bit 1 |
| 핀 160 | RE2 — General purpose I/O port E bit 2 |
| 핀 161 | RE3 — General purpose I/O port E bit 3 |
| 핀 162 | RE4 — General purpose I/O port E bit 4 |
| 핀 163 | RE5 — General purpose I/O port E bit 5 |
| 핀 164 | RE6 — General purpose I/O port E bit 6 |
| 핀 165 | RE7 — General purpose I/O port E bit 7 |
| 핀 166 | VSS — Ground reference |
| 핀 167 | TCK — JTAG Test Clock |
| 핀 168 | TDI — JTAG Test Data In |
| 핀 169 | TDO — JTAG Test Data Out |
| 핀 170 | TMS — JTAG Test Mode Select |
| 핀 171 | MCLR — Master Clear (reset, active low) |
| 핀 172 | VDD — I/O supply voltage (3.3V) |
| 핀 173 | VDDCORE — Internal core voltage (1.2V from internal LDO) |
| 핀 174 | ENVREG — Internal voltage regulator enable |
| 핀 175 | RF0 — General purpose I/O port F bit 0 |
| 핀 176 | RF1 — General purpose I/O port F bit 1 |
일반적인 애플리케이션
PIC32MZ1064DAL176T-I/2J 적합 용도: 6 애플리케이션s: Industrial HMI Control Panel, Home Appliance Touch Interface, Building Automation Controller, Medical Device User Interface, Industrial IoT Edge Gateway, Automotive Infotainment Secondary Display.
Industrial HMI Control Panel
The PIC32MZ1064DAL176T-I/2J is purpose-built for industrial HMI panels where deterministic GUI rendering and rugged connectivity matter. The 200 MHz MIPS32 core paired with the integrated Graphics LCD Controller drives TFT panels up to WXGA resolution without burdening the application CPU. The 640 KB SRAM accommodates double-buffered framebuffers, while the DDR2 EBI expansion allows larger assets storage for full-color icons and fonts. Dual CAN 2.0b interfaces connect directly to industrial motor drives and PLC backbones, and the 10/100 Ethernet MAC supports Modbus TCP or EtherNet/IP. Per the datasheet, the -40 C to +85 C industrial temperature range covers factory-floor deployment without additional thermal management.
추천
Home Appliance Touch Interface
Consumer appliances with capacitive touchscreens - ovens, washing machines, and refrigerators - benefit from the PIC32MZ1064DAL176T-I/2J's integrated graphics peripherals and USB OTG. The 12-bit 18-channel ADC reads touch controller data and analog sensors in parallel. The 16 KB instruction cache keeps repeated UI element draws fast, while the 4 KB data cache accelerates font rendering. USB 2.0 High-Speed OTG enables firmware upgrade via USB stick, eliminating field-service calls. The Microchip datasheet indicates 1.8V-3.6V operation simplifies power tree design when paired with a single 3.3V LDO and internal LDO for the 1.2V core.
추천
Building Automation Controller
Building automation systems combine HVAC control, lighting, and security into one panel - a perfect fit for the PIC32MZ1064DAL176T-I/2J. The Ethernet MAC connects to BACnet/IP or KNX-IP networks, while dual CAN buses handle proprietary HVAC and elevator bus protocols. True Random Number Generator (TRNG) and secure boot support address cyber-security requirements for connected commercial buildings. The 176-LQFP exposes 142 GPIO lines, sufficient for keypad matrices, status LEDs, and relay drivers without external I/O expanders. Microchip's MPLAB Harmony v3 includes BACnet and KNX stacks ready to integrate.
추천
Medical Device User Interface
Medical equipment such as infusion pumps, patient monitors, and diagnostic analyzers benefit from the PIC32MZ1064DAL176T-I/2J's deterministic interrupt response and graphics performance. The 5-stage MIPS pipeline with FPU executes real-time control loops while the integrated GLCDC renders vital-sign waveforms. Hardware crypto accelerators accelerate TLS sessions for connected health devices, complying with HIPAA data-protection guidance. Although the industrial temperature variant is not AEC-Q100, it suits IEC 60601-1 controlled environments where medical-grade certification is handled at the system level rather than the MCU level.
추천
Industrial IoT Edge Gateway
Industrial IoT gateways aggregate sensor data from Modbus, CAN, and analog sources, then push to cloud services - a natural application for the PIC32MZ1064DAL176T-I/2J. The dual CAN 2.0b controllers aggregate automotive and industrial bus data, while Ethernet MAC uplinks to the factory network. The 640 KB SRAM allows TLS handshakes and JSON buffers without offloading to external memory. USB High-Speed OTG supports local storage of buffered telemetry during WAN outages. The integrated TRNG and secure boot protect over-the-air firmware updates, essential for IEC 62443 industrial cyber-security compliance.
추천
Automotive Infotainment Secondary Display
Although the PIC32MZ1064DAL176T-I/2J itself is industrial-grade, its automotive sibling PIC32MZ1064DAL176T-V/2J serves as a drop-in replacement for AEC-Q100 qualified secondary displays - rear-seat entertainment, HVAC control, and instrument-cluster sub-displays. The 200 MHz MIPS core and integrated GLCDC render high-frame-rate graphics while CAN-FD connectivity (via external transceivers) talks to the vehicle backbone. Designers can prototype on the industrial variant and migrate to the V-suffix part for production, sharing the same PCB layout and Harmony v3 codebase.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ1064DAL176T-I/2J — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ1064DAB176-I/2J | PIC32MZ1064DAG176T-I/2J | PIC32MZ1025DAL176-I/2J | PIC32MZ1064DAL176-I/2J | PIC32MZ2064DAL176T-V/2J |
|---|---|---|---|---|---|---|
| Package | 176-LQFP (20x20 mm) | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Graphics LCD Controller | Integrated, up to WXGA | Integrated, sub-WVGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA |
| DDR2 EBI Support | Yes (16-bit) | No | Yes | Yes | Yes | Yes |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Automotive -40C to +125C (AEC-Q100) |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tray | Tray | Tape & Reel |
주요 차별점
- Highest Flash density in 176-LQFP PIC32MZ DAL lineup (vs PIC32MZ1025DAL176-I/2J)
- Industrial temperature grade with full peripheral set (vs PIC32MZ1064DAB176-I/2J)
- Same 176-LQFP pinout enables PCB reuse across grades (vs PIC32MZ2064DAL176T-V/2J)
설계 노트
Estimated: At full peripheral utilization (CPU + GLCDC + USB + Ethernet), the PIC32MZ1064DAL176T-I/2J can dissipate up to 1.5W. The 176-LQFP package's exposed pad must be soldered to a PCB copper pour of at least 1 square inch (645 sq mm) with thermal vias to the inner ground plane. Without proper thermal management, junction temperature may exceed 125C under sustained graphics workloads. Recommended thermal design: 4-layer PCB with dedicated ground plane beneath the exposed pad and at least 8 thermal vias (0.3 mm drill).
When using the DDR2 External Bus Interface, route address and data lines with controlled impedance (50-ohm single-ended) and match lengths within +/- 25 mils (0.635 mm). Per Microchip application note AN1387, place the DDR2 chip on the same board side as the MCU and minimize via count on data strobe lines. Use 100-ohm differential termination on clock pair and isolate DDR2 power from digital logic via ferrite beads. Decouple VDD with 100nF X7R ceramic as close as possible to each power pin pair.
Do not skip the ENVREG pin capacitor - the internal 1.2V core LDO requires a 10uF ceramic on ENVREG to VSS. Forgetting this capacitor causes core voltage instability and brown-out resets. Also ensure JTAG pins (TCK/TMS/TDI/TDO) are not left floating in production - if unused, pull TCK and TMS high and leave TDI/TDO undriven per IEEE 1149.1. Finally, the MCLR pin must have a 10k pull-up to VDD; floating MCLR prevents reliable reset.
The USB 2.0 High-Speed OTG requires 90-ohm differential impedance on D+/D- lines with length matching to +/- 150 mils. Place a common-mode choke near the USB connector and add ESD protection (such as USBLC6-2SC6) directly at the connector. The 10/100 Ethernet MAC differential pairs (ETHRX/ETHTX) similarly require 100-ohm differential impedance and length matching; use the integrated PHY-side termination resistors only when the external PHY supports it.
규정 준수 정보
Industrial grade -40C to +85C, not AEC-Q100 qualified. Choose V-suffix variant (e.g., PIC32MZ2064DAL176T-V/2J) for automotive. RoHS compliant per Microchip product declaration.