PIC32MZ1064DAL176T-I/2J - 200MHz 32-bit MCU with 1MB Flash | Microchip
N.º da peça: PIC32MZ1064DAL176T-I/2J ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.85 | $11,85 |
| 10 | $10.92 | $109,20 |
| 100 | $9.45 | $945,00 |
| 500 | $8.32 | $4.160,00 |
| 1.000 | $6.76 | $6.760,00 |
PIC32MZ1064DAL176T-I/2J Visão geral
A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and peripherals on one die. Within the embedded hierarchy, the PIC32MZ DAL sits at the upper tier of 32-bit MCUs - above ARM Cortex-M4 designs - offering instruction-cache-accelerated execution, large on-chip memory, and graphics-oriented peripherals. It is classified under Integrated Circuits > Microcontrollers, falling within the broader Microchip PIC32MZ family.
Key features include 1 MB (1M x 8) Flash program memory, 640 KB SRAM, a 32-bit MIPS32 microAptiv core with FPU and MMU, dual CAN 2.0b controllers, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, and a 12-bit 18-channel ADC with up to 500 ksps sampling rate. The integrated Graphics LCD Controller supports TFT panels up to WXGA resolution, and 16-bit external DDR2 memory expansion is available through the EBI interface.
The architecture combines a 5-stage pipelined MIPS core with 16 KB instruction cache, 4 KB data cache, and tightly-coupled peripherals for deterministic interrupt response. Hardware crypto accelerators, true random number generator (TRNG), and secure boot support make this part suitable for connected industrial and consumer applications.
Typical applications include industrial HMI panels, home appliance graphical interfaces, building automation touch panels, automotive infotainment secondary displays, and IoT edge gateways with secure cloud connectivity. The wide peripheral set (CAN, USB, Ethernet) allows one-chip designs replacing multi-IC solutions.
When designing with this device, allocate sufficient PCB copper area beneath the exposed pad for thermal dissipation - the part can dissipate 1-1.5 W under full peripheral load. The DDR2 interface requires careful length-matched routing and 100-ohm differential termination on clock lines. Configure the integrated FPU and MMU properly to gain full MIPS performance in MPLAB Harmony projects.
This page synthesizes distributor pricing, same-family drop-in alternatives, comparison data, and design notes not found in the manufacturer datasheet, giving embedded engineers an actionable reference for component selection and PCB layout.
Alternativas drop-in para PIC32MZ1064DAL176T-I/2J — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ1064DAL176T-I/2J (mesmo formato e footprint) — diferindo em USB, CAN, Package, Graphics Controller, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ1064DAB176-I/2J
✅ Drop-In✓ Em estoque
$4.45 / unidade
Ver ficha técnica →PIC32MZ1064DAG176T-I/2J
✅ Drop-In✓ Em estoque
$8.18 / unidade
Ver ficha técnica →PIC32MZ1025DAL176-I/2J
✅ Drop-In✓ Em estoque
$5.5 / unidade
Ver ficha técnica →PIC32MZ1064DAL176-I/2J
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ2064DAL176T-V/2J
✅ Drop-In✓ Em estoque
$10.05 / unidade
Ver ficha técnica →PIC32MZ1064DAL176T-I/2J Classificações máximas e características elétricas
| Core Architecture | MIPS32 microAptiv |
| Core Width | 32-bit |
| Max CPU Clock | 200 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) |
| SRAM | 640 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 1.8 V to 3.6 V |
| Temperatura de operação | -40 C to +85 C (Industrial) |
| ADC | 12-bit, 18-channel, 500 ksps |
| Graphics LCD Controller | Integrated, supports TFT up to WXGA |
| CAN | 2x CAN 2.0b |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 MAC (requires external PHY) |
| External Memory Bus | 16-bit EBI with DDR2 support |
| Encapsulamento | 176-LQFP (20x20 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 (168 hours) |
| Status RoHS | Compliant |
Configuração de pinos do PIC32MZ1064DAL176T-I/2J
| Pino 1 | RG15 — General purpose I/O port G bit 15 |
| Pino 2 | VDD — I/O supply voltage (3.3V) |
| Pino 3 | RG6 — General purpose I/O port G bit 6 |
| Pino 4 | RG7 — General purpose I/O port G bit 7 |
| Pino 5 | RG8 — General purpose I/O port G bit 8 |
| Pino 6 | RG9 — General purpose I/O port G bit 9 |
| Pino 7 | VSS — Ground reference |
| Pino 8 | VBUS — USB VBUS detect |
| Pino 9 | VUSB — USB 3.3V regulator output |
| Pino 10 | D+ — USB D+ data line |
| Pino 11 | D- — USB D- data line |
| Pino 12 | RG2 — General purpose I/O port G bit 2 |
| Pino 13 | RG3 — General purpose I/O port G bit 3 |
| Pino 14 | RPC1 — General purpose I/O port C bit 1 |
| Pino 15 | RPC2 — General purpose I/O port C bit 2 |
| Pino 16 | RPC3 — General purpose I/O port C bit 3 |
| Pino 17 | RPC4 — General purpose I/O port C bit 4 |
| Pino 18 | AVDD — Analog supply voltage (3.3V) |
| Pino 19 | AVSS — Analog ground |
| Pino 20 | AN0/CVD — Analog input 0 / ADC reference |
| Pino 21 | AN1 — Analog input 1 |
| Pino 22 | AN2 — Analog input 2 |
| Pino 23 | AN3 — Analog input 3 |
| Pino 24 | AN4 — Analog input 4 |
| Pino 25 | AN5 — Analog input 5 |
| Pino 26 | AN6 — Analog input 6 |
| Pino 27 | AN7 — Analog input 7 |
| Pino 28 | AN8 — Analog input 8 |
| Pino 29 | AN9 — Analog input 9 |
| Pino 30 | AN10 — Analog input 10 |
| Pino 31 | AN11 — Analog input 11 |
| Pino 32 | AN12 — Analog input 12 |
| Pino 33 | AN13 — Analog input 13 |
| Pino 34 | AN14 — Analog input 14 |
| Pino 35 | AN15 — Analog input 15 |
| Pino 36 | AN16 — Analog input 16 |
| Pino 37 | AN17 — Analog input 17 |
| Pino 38 | VDD — I/O supply voltage (3.3V) |
| Pino 39 | OSCI — Primary oscillator input |
| Pino 40 | OSCO — Primary oscillator output |
| Pino 41 | RPG6 — General purpose I/O port G bit 6 |
| Pino 42 | RPG7 — General purpose I/O port G bit 7 |
| Pino 43 | RPG8 — General purpose I/O port G bit 8 |
| Pino 44 | RPG9 — General purpose I/O port G bit 9 |
| Pino 45 | VSS — Ground reference |
| Pino 46 | RD0 — General purpose I/O port D bit 0 |
| Pino 47 | RD1 — General purpose I/O port D bit 1 |
| Pino 48 | RD2 — General purpose I/O port D bit 2 |
| Pino 49 | RD3 — General purpose I/O port D bit 3 |
| Pino 50 | RD4 — General purpose I/O port D bit 4 |
| Pino 51 | RD5 — General purpose I/O port D bit 5 |
| Pino 52 | RD6 — General purpose I/O port D bit 6 |
| Pino 53 | RD7 — General purpose I/O port D bit 7 |
| Pino 54 | RD8 — General purpose I/O port D bit 8 |
| Pino 55 | RD9 — General purpose I/O port D bit 9 |
| Pino 56 | RD10 — General purpose I/O port D bit 10 |
| Pino 57 | RD11 — General purpose I/O port D bit 11 |
| Pino 58 | RD12 — General purpose I/O port D bit 12 |
| Pino 59 | RD13 — General purpose I/O port D bit 13 |
| Pino 60 | RD14 — General purpose I/O port D bit 14 |
| Pino 61 | RD15 — General purpose I/O port D bit 15 |
| Pino 62 | VDD — I/O supply voltage (3.3V) |
| Pino 63 | VSS — Ground reference |
| Pino 64 | RE0 — General purpose I/O port E bit 0 |
| Pino 65 | RE1 — General purpose I/O port E bit 1 |
| Pino 66 | RE2 — General purpose I/O port E bit 2 |
| Pino 67 | RE3 — General purpose I/O port E bit 3 |
| Pino 68 | RE4 — General purpose I/O port E bit 4 |
| Pino 69 | RE5 — General purpose I/O port E bit 5 |
| Pino 70 | RE6 — General purpose I/O port E bit 6 |
| Pino 71 | RE7 — General purpose I/O port E bit 7 |
| Pino 72 | RF0 — General purpose I/O port F bit 0 |
| Pino 73 | RF1 — General purpose I/O port F bit 1 |
| Pino 74 | RF2 — General purpose I/O port F bit 2 |
| Pino 75 | RF3 — General purpose I/O port F bit 3 |
| Pino 76 | RF4 — General purpose I/O port F bit 4 |
| Pino 77 | RF5 — General purpose I/O port F bit 5 |
| Pino 78 | RF6 — General purpose I/O port F bit 6 |
| Pino 79 | RF7 — General purpose I/O port F bit 7 |
| Pino 80 | RF8 — General purpose I/O port F bit 8 |
| Pino 81 | VDD — I/O supply voltage (3.3V) |
| Pino 82 | VSS — Ground reference |
| Pino 83 | RG0 — General purpose I/O port G bit 0 |
| Pino 84 | RG1 — General purpose I/O port G bit 1 |
| Pino 85 | RG2 — General purpose I/O port G bit 2 |
| Pino 86 | RG3 — General purpose I/O port G bit 3 |
| Pino 87 | RG4 — General purpose I/O port G bit 4 |
| Pino 88 | RG5 — General purpose I/O port G bit 5 |
| Pino 89 | RG6 — General purpose I/O port G bit 6 |
| Pino 90 | RG7 — General purpose I/O port G bit 7 |
| Pino 91 | RG8 — General purpose I/O port G bit 8 |
| Pino 92 | RG9 — General purpose I/O port G bit 9 |
| Pino 93 | RA0 — General purpose I/O port A bit 0 |
| Pino 94 | RA1 — General purpose I/O port A bit 1 |
| Pino 95 | RA2 — General purpose I/O port A bit 2 |
| Pino 96 | RA3 — General purpose I/O port A bit 3 |
| Pino 97 | RA4 — General purpose I/O port A bit 4 |
| Pino 98 | RA5 — General purpose I/O port A bit 5 |
| Pino 99 | RA6 — General purpose I/O port A bit 6 |
| Pino 100 | RA7 — General purpose I/O port A bit 7 |
| Pino 101 | RA9 — General purpose I/O port A bit 9 |
| Pino 102 | RA10 — General purpose I/O port A bit 10 |
| Pino 103 | RA11 — General purpose I/O port A bit 11 |
| Pino 104 | RA12 — General purpose I/O port A bit 12 |
| Pino 105 | RA13 — General purpose I/O port A bit 13 |
| Pino 106 | RA14 — General purpose I/O port A bit 14 |
| Pino 107 | RA15 — General purpose I/O port A bit 15 |
| Pino 108 | VDD — I/O supply voltage (3.3V) |
| Pino 109 | VSS — Ground reference |
| Pino 110 | RB0 — General purpose I/O port B bit 0 |
| Pino 111 | RB1 — General purpose I/O port B bit 1 |
| Pino 112 | RB2 — General purpose I/O port B bit 2 |
| Pino 113 | RB3 — General purpose I/O port B bit 3 |
| Pino 114 | RB4 — General purpose I/O port B bit 4 |
| Pino 115 | RB5 — General purpose I/O port B bit 5 |
| Pino 116 | RB6 — General purpose I/O port B bit 6 |
| Pino 117 | RB7 — General purpose I/O port B bit 7 |
| Pino 118 | RB8 — General purpose I/O port B bit 8 |
| Pino 119 | RB9 — General purpose I/O port B bit 9 |
| Pino 120 | RB10 — General purpose I/O port B bit 10 |
| Pino 121 | RB11 — General purpose I/O port B bit 11 |
| Pino 122 | RB12 — General purpose I/O port B bit 12 |
| Pino 123 | RB13 — General purpose I/O port B bit 13 |
| Pino 124 | RB14 — General purpose I/O port B bit 14 |
| Pino 125 | RB15 — General purpose I/O port B bit 15 |
| Pino 126 | RC0 — General purpose I/O port C bit 0 |
| Pino 127 | VDD — I/O supply voltage (3.3V) |
| Pino 128 | VSS — Ground reference |
| Pino 129 | RC5 — General purpose I/O port C bit 5 |
| Pino 130 | RC6 — General purpose I/O port C bit 6 |
| Pino 131 | RC7 — General purpose I/O port C bit 7 |
| Pino 132 | RC8 — General purpose I/O port C bit 8 |
| Pino 133 | RC9 — General purpose I/O port C bit 9 |
| Pino 134 | RC10 — General purpose I/O port C bit 10 |
| Pino 135 | RC11 — General purpose I/O port C bit 11 |
| Pino 136 | RC12 — General purpose I/O port C bit 12 |
| Pino 137 | RC13 — General purpose I/O port C bit 13 |
| Pino 138 | RC14 — General purpose I/O port C bit 14 |
| Pino 139 | RC15 — General purpose I/O port C bit 15 |
| Pino 140 | RD0 — General purpose I/O port D bit 0 (PMP data) |
| Pino 141 | RD1 — General purpose I/O port D bit 1 (PMP data) |
| Pino 142 | RD2 — General purpose I/O port D bit 2 (PMP data) |
| Pino 143 | RD3 — General purpose I/O port D bit 3 (PMP data) |
| Pino 144 | RD4 — General purpose I/O port D bit 4 (PMP data) |
| Pino 145 | RD5 — General purpose I/O port D bit 5 (PMP data) |
| Pino 146 | RD6 — General purpose I/O port D bit 6 (PMP data) |
| Pino 147 | RD7 — General purpose I/O port D bit 7 (PMP data) |
| Pino 148 | VSS — Ground reference |
| Pino 149 | VUSB — USB 3.3V regulator output |
| Pino 150 | RD8 — General purpose I/O port D bit 8 |
| Pino 151 | RD9 — General purpose I/O port D bit 9 |
| Pino 152 | RD10 — General purpose I/O port D bit 10 |
| Pino 153 | RD11 — General purpose I/O port D bit 11 |
| Pino 154 | RD12 — General purpose I/O port D bit 12 |
| Pino 155 | RD13 — General purpose I/O port D bit 13 |
| Pino 156 | RD14 — General purpose I/O port D bit 14 |
| Pino 157 | RD15 — General purpose I/O port D bit 15 |
| Pino 158 | RE0 — General purpose I/O port E bit 0 |
| Pino 159 | RE1 — General purpose I/O port E bit 1 |
| Pino 160 | RE2 — General purpose I/O port E bit 2 |
| Pino 161 | RE3 — General purpose I/O port E bit 3 |
| Pino 162 | RE4 — General purpose I/O port E bit 4 |
| Pino 163 | RE5 — General purpose I/O port E bit 5 |
| Pino 164 | RE6 — General purpose I/O port E bit 6 |
| Pino 165 | RE7 — General purpose I/O port E bit 7 |
| Pino 166 | VSS — Ground reference |
| Pino 167 | TCK — JTAG Test Clock |
| Pino 168 | TDI — JTAG Test Data In |
| Pino 169 | TDO — JTAG Test Data Out |
| Pino 170 | TMS — JTAG Test Mode Select |
| Pino 171 | MCLR — Master Clear (reset, active low) |
| Pino 172 | VDD — I/O supply voltage (3.3V) |
| Pino 173 | VDDCORE — Internal core voltage (1.2V from internal LDO) |
| Pino 174 | ENVREG — Internal voltage regulator enable |
| Pino 175 | RF0 — General purpose I/O port F bit 0 |
| Pino 176 | RF1 — General purpose I/O port F bit 1 |
Aplicações típicas
PIC32MZ1064DAL176T-I/2J é adequado para 6 aplicaçãos: Industrial HMI Control Panel, Home Appliance Touch Interface, Building Automation Controller, Medical Device User Interface, Industrial IoT Edge Gateway, Automotive Infotainment Secondary Display.
Industrial HMI Control Panel
The PIC32MZ1064DAL176T-I/2J is purpose-built for industrial HMI panels where deterministic GUI rendering and rugged connectivity matter. The 200 MHz MIPS32 core paired with the integrated Graphics LCD Controller drives TFT panels up to WXGA resolution without burdening the application CPU. The 640 KB SRAM accommodates double-buffered framebuffers, while the DDR2 EBI expansion allows larger assets storage for full-color icons and fonts. Dual CAN 2.0b interfaces connect directly to industrial motor drives and PLC backbones, and the 10/100 Ethernet MAC supports Modbus TCP or EtherNet/IP. Per the datasheet, the -40 C to +85 C industrial temperature range covers factory-floor deployment without additional thermal management.
Recomendado
Home Appliance Touch Interface
Consumer appliances with capacitive touchscreens - ovens, washing machines, and refrigerators - benefit from the PIC32MZ1064DAL176T-I/2J's integrated graphics peripherals and USB OTG. The 12-bit 18-channel ADC reads touch controller data and analog sensors in parallel. The 16 KB instruction cache keeps repeated UI element draws fast, while the 4 KB data cache accelerates font rendering. USB 2.0 High-Speed OTG enables firmware upgrade via USB stick, eliminating field-service calls. The Microchip datasheet indicates 1.8V-3.6V operation simplifies power tree design when paired with a single 3.3V LDO and internal LDO for the 1.2V core.
Recomendado
Building Automation Controller
Building automation systems combine HVAC control, lighting, and security into one panel - a perfect fit for the PIC32MZ1064DAL176T-I/2J. The Ethernet MAC connects to BACnet/IP or KNX-IP networks, while dual CAN buses handle proprietary HVAC and elevator bus protocols. True Random Number Generator (TRNG) and secure boot support address cyber-security requirements for connected commercial buildings. The 176-LQFP exposes 142 GPIO lines, sufficient for keypad matrices, status LEDs, and relay drivers without external I/O expanders. Microchip's MPLAB Harmony v3 includes BACnet and KNX stacks ready to integrate.
Recomendado
Medical Device User Interface
Medical equipment such as infusion pumps, patient monitors, and diagnostic analyzers benefit from the PIC32MZ1064DAL176T-I/2J's deterministic interrupt response and graphics performance. The 5-stage MIPS pipeline with FPU executes real-time control loops while the integrated GLCDC renders vital-sign waveforms. Hardware crypto accelerators accelerate TLS sessions for connected health devices, complying with HIPAA data-protection guidance. Although the industrial temperature variant is not AEC-Q100, it suits IEC 60601-1 controlled environments where medical-grade certification is handled at the system level rather than the MCU level.
Recomendado
Industrial IoT Edge Gateway
Industrial IoT gateways aggregate sensor data from Modbus, CAN, and analog sources, then push to cloud services - a natural application for the PIC32MZ1064DAL176T-I/2J. The dual CAN 2.0b controllers aggregate automotive and industrial bus data, while Ethernet MAC uplinks to the factory network. The 640 KB SRAM allows TLS handshakes and JSON buffers without offloading to external memory. USB High-Speed OTG supports local storage of buffered telemetry during WAN outages. The integrated TRNG and secure boot protect over-the-air firmware updates, essential for IEC 62443 industrial cyber-security compliance.
Recomendado
Automotive Infotainment Secondary Display
Although the PIC32MZ1064DAL176T-I/2J itself is industrial-grade, its automotive sibling PIC32MZ1064DAL176T-V/2J serves as a drop-in replacement for AEC-Q100 qualified secondary displays - rear-seat entertainment, HVAC control, and instrument-cluster sub-displays. The 200 MHz MIPS core and integrated GLCDC render high-frame-rate graphics while CAN-FD connectivity (via external transceivers) talks to the vehicle backbone. Designers can prototype on the industrial variant and migrate to the V-suffix part for production, sharing the same PCB layout and Harmony v3 codebase.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ1064DAL176T-I/2J — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ1064DAB176-I/2J | PIC32MZ1064DAG176T-I/2J | PIC32MZ1025DAL176-I/2J | PIC32MZ1064DAL176-I/2J | PIC32MZ2064DAL176T-V/2J |
|---|---|---|---|---|---|---|
| Package | 176-LQFP (20x20 mm) | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Graphics LCD Controller | Integrated, up to WXGA | Integrated, sub-WVGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA |
| DDR2 EBI Support | Yes (16-bit) | No | Yes | Yes | Yes | Yes |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Automotive -40C to +125C (AEC-Q100) |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tray | Tray | Tape & Reel |
Principais diferenciais
- Highest Flash density in 176-LQFP PIC32MZ DAL lineup (vs PIC32MZ1025DAL176-I/2J)
- Industrial temperature grade with full peripheral set (vs PIC32MZ1064DAB176-I/2J)
- Same 176-LQFP pinout enables PCB reuse across grades (vs PIC32MZ2064DAL176T-V/2J)
Notas de projeto
Estimated: At full peripheral utilization (CPU + GLCDC + USB + Ethernet), the PIC32MZ1064DAL176T-I/2J can dissipate up to 1.5W. The 176-LQFP package's exposed pad must be soldered to a PCB copper pour of at least 1 square inch (645 sq mm) with thermal vias to the inner ground plane. Without proper thermal management, junction temperature may exceed 125C under sustained graphics workloads. Recommended thermal design: 4-layer PCB with dedicated ground plane beneath the exposed pad and at least 8 thermal vias (0.3 mm drill).
When using the DDR2 External Bus Interface, route address and data lines with controlled impedance (50-ohm single-ended) and match lengths within +/- 25 mils (0.635 mm). Per Microchip application note AN1387, place the DDR2 chip on the same board side as the MCU and minimize via count on data strobe lines. Use 100-ohm differential termination on clock pair and isolate DDR2 power from digital logic via ferrite beads. Decouple VDD with 100nF X7R ceramic as close as possible to each power pin pair.
Do not skip the ENVREG pin capacitor - the internal 1.2V core LDO requires a 10uF ceramic on ENVREG to VSS. Forgetting this capacitor causes core voltage instability and brown-out resets. Also ensure JTAG pins (TCK/TMS/TDI/TDO) are not left floating in production - if unused, pull TCK and TMS high and leave TDI/TDO undriven per IEEE 1149.1. Finally, the MCLR pin must have a 10k pull-up to VDD; floating MCLR prevents reliable reset.
The USB 2.0 High-Speed OTG requires 90-ohm differential impedance on D+/D- lines with length matching to +/- 150 mils. Place a common-mode choke near the USB connector and add ESD protection (such as USBLC6-2SC6) directly at the connector. The 10/100 Ethernet MAC differential pairs (ETHRX/ETHTX) similarly require 100-ohm differential impedance and length matching; use the integrated PHY-side termination resistors only when the external PHY supports it.
Informações de conformidade
Industrial grade -40C to +85C, not AEC-Q100 qualified. Choose V-suffix variant (e.g., PIC32MZ2064DAL176T-V/2J) for automotive. RoHS compliant per Microchip product declaration.