PIC32MZ1064DAL176T-I/2J - 200MHz 32-bit MCU with 1MB Flash | Microchip
Référence : PIC32MZ1064DAL176T-I/2J ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $11.85 | $11,85 |
| 10 | $10.92 | $109,20 |
| 100 | $9.45 | $945,00 |
| 500 | $8.32 | $4 160,00 |
| 1 000 | $6.76 | $6 760,00 |
PIC32MZ1064DAL176T-I/2J Présentation
A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (SRAM), and peripherals on one die. Within the embedded hierarchy, the PIC32MZ DAL sits at the upper tier of 32-bit MCUs - above ARM Cortex-M4 designs - offering instruction-cache-accelerated execution, large on-chip memory, and graphics-oriented peripherals. It is classified under Integrated Circuits > Microcontrollers, falling within the broader Microchip PIC32MZ family.
Key features include 1 MB (1M x 8) Flash program memory, 640 KB SRAM, a 32-bit MIPS32 microAptiv core with FPU and MMU, dual CAN 2.0b controllers, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, and a 12-bit 18-channel ADC with up to 500 ksps sampling rate. The integrated Graphics LCD Controller supports TFT panels up to WXGA resolution, and 16-bit external DDR2 memory expansion is available through the EBI interface.
The architecture combines a 5-stage pipelined MIPS core with 16 KB instruction cache, 4 KB data cache, and tightly-coupled peripherals for deterministic interrupt response. Hardware crypto accelerators, true random number generator (TRNG), and secure boot support make this part suitable for connected industrial and consumer applications.
Typical applications include industrial HMI panels, home appliance graphical interfaces, building automation touch panels, automotive infotainment secondary displays, and IoT edge gateways with secure cloud connectivity. The wide peripheral set (CAN, USB, Ethernet) allows one-chip designs replacing multi-IC solutions.
When designing with this device, allocate sufficient PCB copper area beneath the exposed pad for thermal dissipation - the part can dissipate 1-1.5 W under full peripheral load. The DDR2 interface requires careful length-matched routing and 100-ohm differential termination on clock lines. Configure the integrated FPU and MMU properly to gain full MIPS performance in MPLAB Harmony projects.
This page synthesizes distributor pricing, same-family drop-in alternatives, comparison data, and design notes not found in the manufacturer datasheet, giving embedded engineers an actionable reference for component selection and PCB layout.
Alternatives de remplacement direct pour PIC32MZ1064DAL176T-I/2J — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1064DAL176T-I/2J (même facteur de forme et même empreinte) — différant par USB, CAN, Package, Graphics Controller, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1064DAB176-I/2J
✅ Remplacement direct✓ En stock
$4.45 / unité
Voir la fiche technique →PIC32MZ1064DAG176T-I/2J
✅ Remplacement direct✓ En stock
$8.18 / unité
Voir la fiche technique →PIC32MZ1025DAL176-I/2J
✅ Remplacement direct✓ En stock
$5.5 / unité
Voir la fiche technique →PIC32MZ1064DAL176-I/2J
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ2064DAL176T-V/2J
✅ Remplacement direct✓ En stock
$10.05 / unité
Voir la fiche technique →PIC32MZ1064DAL176T-I/2J Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv |
| Core Width | 32-bit |
| Max CPU Clock | 200 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) |
| SRAM | 640 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 1.8 V to 3.6 V |
| Température de fonctionnement | -40 C to +85 C (Industrial) |
| ADC | 12-bit, 18-channel, 500 ksps |
| Graphics LCD Controller | Integrated, supports TFT up to WXGA |
| CAN | 2x CAN 2.0b |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 MAC (requires external PHY) |
| External Memory Bus | 16-bit EBI with DDR2 support |
| Boîtier | 176-LQFP (20x20 mm) with exposed pad |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (168 hours) |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MZ1064DAL176T-I/2J
| Broche 1 | RG15 — General purpose I/O port G bit 15 |
| Broche 2 | VDD — I/O supply voltage (3.3V) |
| Broche 3 | RG6 — General purpose I/O port G bit 6 |
| Broche 4 | RG7 — General purpose I/O port G bit 7 |
| Broche 5 | RG8 — General purpose I/O port G bit 8 |
| Broche 6 | RG9 — General purpose I/O port G bit 9 |
| Broche 7 | VSS — Ground reference |
| Broche 8 | VBUS — USB VBUS detect |
| Broche 9 | VUSB — USB 3.3V regulator output |
| Broche 10 | D+ — USB D+ data line |
| Broche 11 | D- — USB D- data line |
| Broche 12 | RG2 — General purpose I/O port G bit 2 |
| Broche 13 | RG3 — General purpose I/O port G bit 3 |
| Broche 14 | RPC1 — General purpose I/O port C bit 1 |
| Broche 15 | RPC2 — General purpose I/O port C bit 2 |
| Broche 16 | RPC3 — General purpose I/O port C bit 3 |
| Broche 17 | RPC4 — General purpose I/O port C bit 4 |
| Broche 18 | AVDD — Analog supply voltage (3.3V) |
| Broche 19 | AVSS — Analog ground |
| Broche 20 | AN0/CVD — Analog input 0 / ADC reference |
| Broche 21 | AN1 — Analog input 1 |
| Broche 22 | AN2 — Analog input 2 |
| Broche 23 | AN3 — Analog input 3 |
| Broche 24 | AN4 — Analog input 4 |
| Broche 25 | AN5 — Analog input 5 |
| Broche 26 | AN6 — Analog input 6 |
| Broche 27 | AN7 — Analog input 7 |
| Broche 28 | AN8 — Analog input 8 |
| Broche 29 | AN9 — Analog input 9 |
| Broche 30 | AN10 — Analog input 10 |
| Broche 31 | AN11 — Analog input 11 |
| Broche 32 | AN12 — Analog input 12 |
| Broche 33 | AN13 — Analog input 13 |
| Broche 34 | AN14 — Analog input 14 |
| Broche 35 | AN15 — Analog input 15 |
| Broche 36 | AN16 — Analog input 16 |
| Broche 37 | AN17 — Analog input 17 |
| Broche 38 | VDD — I/O supply voltage (3.3V) |
| Broche 39 | OSCI — Primary oscillator input |
| Broche 40 | OSCO — Primary oscillator output |
| Broche 41 | RPG6 — General purpose I/O port G bit 6 |
| Broche 42 | RPG7 — General purpose I/O port G bit 7 |
| Broche 43 | RPG8 — General purpose I/O port G bit 8 |
| Broche 44 | RPG9 — General purpose I/O port G bit 9 |
| Broche 45 | VSS — Ground reference |
| Broche 46 | RD0 — General purpose I/O port D bit 0 |
| Broche 47 | RD1 — General purpose I/O port D bit 1 |
| Broche 48 | RD2 — General purpose I/O port D bit 2 |
| Broche 49 | RD3 — General purpose I/O port D bit 3 |
| Broche 50 | RD4 — General purpose I/O port D bit 4 |
| Broche 51 | RD5 — General purpose I/O port D bit 5 |
| Broche 52 | RD6 — General purpose I/O port D bit 6 |
| Broche 53 | RD7 — General purpose I/O port D bit 7 |
| Broche 54 | RD8 — General purpose I/O port D bit 8 |
| Broche 55 | RD9 — General purpose I/O port D bit 9 |
| Broche 56 | RD10 — General purpose I/O port D bit 10 |
| Broche 57 | RD11 — General purpose I/O port D bit 11 |
| Broche 58 | RD12 — General purpose I/O port D bit 12 |
| Broche 59 | RD13 — General purpose I/O port D bit 13 |
| Broche 60 | RD14 — General purpose I/O port D bit 14 |
| Broche 61 | RD15 — General purpose I/O port D bit 15 |
| Broche 62 | VDD — I/O supply voltage (3.3V) |
| Broche 63 | VSS — Ground reference |
| Broche 64 | RE0 — General purpose I/O port E bit 0 |
| Broche 65 | RE1 — General purpose I/O port E bit 1 |
| Broche 66 | RE2 — General purpose I/O port E bit 2 |
| Broche 67 | RE3 — General purpose I/O port E bit 3 |
| Broche 68 | RE4 — General purpose I/O port E bit 4 |
| Broche 69 | RE5 — General purpose I/O port E bit 5 |
| Broche 70 | RE6 — General purpose I/O port E bit 6 |
| Broche 71 | RE7 — General purpose I/O port E bit 7 |
| Broche 72 | RF0 — General purpose I/O port F bit 0 |
| Broche 73 | RF1 — General purpose I/O port F bit 1 |
| Broche 74 | RF2 — General purpose I/O port F bit 2 |
| Broche 75 | RF3 — General purpose I/O port F bit 3 |
| Broche 76 | RF4 — General purpose I/O port F bit 4 |
| Broche 77 | RF5 — General purpose I/O port F bit 5 |
| Broche 78 | RF6 — General purpose I/O port F bit 6 |
| Broche 79 | RF7 — General purpose I/O port F bit 7 |
| Broche 80 | RF8 — General purpose I/O port F bit 8 |
| Broche 81 | VDD — I/O supply voltage (3.3V) |
| Broche 82 | VSS — Ground reference |
| Broche 83 | RG0 — General purpose I/O port G bit 0 |
| Broche 84 | RG1 — General purpose I/O port G bit 1 |
| Broche 85 | RG2 — General purpose I/O port G bit 2 |
| Broche 86 | RG3 — General purpose I/O port G bit 3 |
| Broche 87 | RG4 — General purpose I/O port G bit 4 |
| Broche 88 | RG5 — General purpose I/O port G bit 5 |
| Broche 89 | RG6 — General purpose I/O port G bit 6 |
| Broche 90 | RG7 — General purpose I/O port G bit 7 |
| Broche 91 | RG8 — General purpose I/O port G bit 8 |
| Broche 92 | RG9 — General purpose I/O port G bit 9 |
| Broche 93 | RA0 — General purpose I/O port A bit 0 |
| Broche 94 | RA1 — General purpose I/O port A bit 1 |
| Broche 95 | RA2 — General purpose I/O port A bit 2 |
| Broche 96 | RA3 — General purpose I/O port A bit 3 |
| Broche 97 | RA4 — General purpose I/O port A bit 4 |
| Broche 98 | RA5 — General purpose I/O port A bit 5 |
| Broche 99 | RA6 — General purpose I/O port A bit 6 |
| Broche 100 | RA7 — General purpose I/O port A bit 7 |
| Broche 101 | RA9 — General purpose I/O port A bit 9 |
| Broche 102 | RA10 — General purpose I/O port A bit 10 |
| Broche 103 | RA11 — General purpose I/O port A bit 11 |
| Broche 104 | RA12 — General purpose I/O port A bit 12 |
| Broche 105 | RA13 — General purpose I/O port A bit 13 |
| Broche 106 | RA14 — General purpose I/O port A bit 14 |
| Broche 107 | RA15 — General purpose I/O port A bit 15 |
| Broche 108 | VDD — I/O supply voltage (3.3V) |
| Broche 109 | VSS — Ground reference |
| Broche 110 | RB0 — General purpose I/O port B bit 0 |
| Broche 111 | RB1 — General purpose I/O port B bit 1 |
| Broche 112 | RB2 — General purpose I/O port B bit 2 |
| Broche 113 | RB3 — General purpose I/O port B bit 3 |
| Broche 114 | RB4 — General purpose I/O port B bit 4 |
| Broche 115 | RB5 — General purpose I/O port B bit 5 |
| Broche 116 | RB6 — General purpose I/O port B bit 6 |
| Broche 117 | RB7 — General purpose I/O port B bit 7 |
| Broche 118 | RB8 — General purpose I/O port B bit 8 |
| Broche 119 | RB9 — General purpose I/O port B bit 9 |
| Broche 120 | RB10 — General purpose I/O port B bit 10 |
| Broche 121 | RB11 — General purpose I/O port B bit 11 |
| Broche 122 | RB12 — General purpose I/O port B bit 12 |
| Broche 123 | RB13 — General purpose I/O port B bit 13 |
| Broche 124 | RB14 — General purpose I/O port B bit 14 |
| Broche 125 | RB15 — General purpose I/O port B bit 15 |
| Broche 126 | RC0 — General purpose I/O port C bit 0 |
| Broche 127 | VDD — I/O supply voltage (3.3V) |
| Broche 128 | VSS — Ground reference |
| Broche 129 | RC5 — General purpose I/O port C bit 5 |
| Broche 130 | RC6 — General purpose I/O port C bit 6 |
| Broche 131 | RC7 — General purpose I/O port C bit 7 |
| Broche 132 | RC8 — General purpose I/O port C bit 8 |
| Broche 133 | RC9 — General purpose I/O port C bit 9 |
| Broche 134 | RC10 — General purpose I/O port C bit 10 |
| Broche 135 | RC11 — General purpose I/O port C bit 11 |
| Broche 136 | RC12 — General purpose I/O port C bit 12 |
| Broche 137 | RC13 — General purpose I/O port C bit 13 |
| Broche 138 | RC14 — General purpose I/O port C bit 14 |
| Broche 139 | RC15 — General purpose I/O port C bit 15 |
| Broche 140 | RD0 — General purpose I/O port D bit 0 (PMP data) |
| Broche 141 | RD1 — General purpose I/O port D bit 1 (PMP data) |
| Broche 142 | RD2 — General purpose I/O port D bit 2 (PMP data) |
| Broche 143 | RD3 — General purpose I/O port D bit 3 (PMP data) |
| Broche 144 | RD4 — General purpose I/O port D bit 4 (PMP data) |
| Broche 145 | RD5 — General purpose I/O port D bit 5 (PMP data) |
| Broche 146 | RD6 — General purpose I/O port D bit 6 (PMP data) |
| Broche 147 | RD7 — General purpose I/O port D bit 7 (PMP data) |
| Broche 148 | VSS — Ground reference |
| Broche 149 | VUSB — USB 3.3V regulator output |
| Broche 150 | RD8 — General purpose I/O port D bit 8 |
| Broche 151 | RD9 — General purpose I/O port D bit 9 |
| Broche 152 | RD10 — General purpose I/O port D bit 10 |
| Broche 153 | RD11 — General purpose I/O port D bit 11 |
| Broche 154 | RD12 — General purpose I/O port D bit 12 |
| Broche 155 | RD13 — General purpose I/O port D bit 13 |
| Broche 156 | RD14 — General purpose I/O port D bit 14 |
| Broche 157 | RD15 — General purpose I/O port D bit 15 |
| Broche 158 | RE0 — General purpose I/O port E bit 0 |
| Broche 159 | RE1 — General purpose I/O port E bit 1 |
| Broche 160 | RE2 — General purpose I/O port E bit 2 |
| Broche 161 | RE3 — General purpose I/O port E bit 3 |
| Broche 162 | RE4 — General purpose I/O port E bit 4 |
| Broche 163 | RE5 — General purpose I/O port E bit 5 |
| Broche 164 | RE6 — General purpose I/O port E bit 6 |
| Broche 165 | RE7 — General purpose I/O port E bit 7 |
| Broche 166 | VSS — Ground reference |
| Broche 167 | TCK — JTAG Test Clock |
| Broche 168 | TDI — JTAG Test Data In |
| Broche 169 | TDO — JTAG Test Data Out |
| Broche 170 | TMS — JTAG Test Mode Select |
| Broche 171 | MCLR — Master Clear (reset, active low) |
| Broche 172 | VDD — I/O supply voltage (3.3V) |
| Broche 173 | VDDCORE — Internal core voltage (1.2V from internal LDO) |
| Broche 174 | ENVREG — Internal voltage regulator enable |
| Broche 175 | RF0 — General purpose I/O port F bit 0 |
| Broche 176 | RF1 — General purpose I/O port F bit 1 |
Applications typiques
PIC32MZ1064DAL176T-I/2J convient pour 6 applications: Industrial HMI Control Panel, Home Appliance Touch Interface, Building Automation Controller, Medical Device User Interface, Industrial IoT Edge Gateway, Automotive Infotainment Secondary Display.
Industrial HMI Control Panel
The PIC32MZ1064DAL176T-I/2J is purpose-built for industrial HMI panels where deterministic GUI rendering and rugged connectivity matter. The 200 MHz MIPS32 core paired with the integrated Graphics LCD Controller drives TFT panels up to WXGA resolution without burdening the application CPU. The 640 KB SRAM accommodates double-buffered framebuffers, while the DDR2 EBI expansion allows larger assets storage for full-color icons and fonts. Dual CAN 2.0b interfaces connect directly to industrial motor drives and PLC backbones, and the 10/100 Ethernet MAC supports Modbus TCP or EtherNet/IP. Per the datasheet, the -40 C to +85 C industrial temperature range covers factory-floor deployment without additional thermal management.
Recommandé
Home Appliance Touch Interface
Consumer appliances with capacitive touchscreens - ovens, washing machines, and refrigerators - benefit from the PIC32MZ1064DAL176T-I/2J's integrated graphics peripherals and USB OTG. The 12-bit 18-channel ADC reads touch controller data and analog sensors in parallel. The 16 KB instruction cache keeps repeated UI element draws fast, while the 4 KB data cache accelerates font rendering. USB 2.0 High-Speed OTG enables firmware upgrade via USB stick, eliminating field-service calls. The Microchip datasheet indicates 1.8V-3.6V operation simplifies power tree design when paired with a single 3.3V LDO and internal LDO for the 1.2V core.
Recommandé
Building Automation Controller
Building automation systems combine HVAC control, lighting, and security into one panel - a perfect fit for the PIC32MZ1064DAL176T-I/2J. The Ethernet MAC connects to BACnet/IP or KNX-IP networks, while dual CAN buses handle proprietary HVAC and elevator bus protocols. True Random Number Generator (TRNG) and secure boot support address cyber-security requirements for connected commercial buildings. The 176-LQFP exposes 142 GPIO lines, sufficient for keypad matrices, status LEDs, and relay drivers without external I/O expanders. Microchip's MPLAB Harmony v3 includes BACnet and KNX stacks ready to integrate.
Recommandé
Medical Device User Interface
Medical equipment such as infusion pumps, patient monitors, and diagnostic analyzers benefit from the PIC32MZ1064DAL176T-I/2J's deterministic interrupt response and graphics performance. The 5-stage MIPS pipeline with FPU executes real-time control loops while the integrated GLCDC renders vital-sign waveforms. Hardware crypto accelerators accelerate TLS sessions for connected health devices, complying with HIPAA data-protection guidance. Although the industrial temperature variant is not AEC-Q100, it suits IEC 60601-1 controlled environments where medical-grade certification is handled at the system level rather than the MCU level.
Recommandé
Industrial IoT Edge Gateway
Industrial IoT gateways aggregate sensor data from Modbus, CAN, and analog sources, then push to cloud services - a natural application for the PIC32MZ1064DAL176T-I/2J. The dual CAN 2.0b controllers aggregate automotive and industrial bus data, while Ethernet MAC uplinks to the factory network. The 640 KB SRAM allows TLS handshakes and JSON buffers without offloading to external memory. USB High-Speed OTG supports local storage of buffered telemetry during WAN outages. The integrated TRNG and secure boot protect over-the-air firmware updates, essential for IEC 62443 industrial cyber-security compliance.
Recommandé
Automotive Infotainment Secondary Display
Although the PIC32MZ1064DAL176T-I/2J itself is industrial-grade, its automotive sibling PIC32MZ1064DAL176T-V/2J serves as a drop-in replacement for AEC-Q100 qualified secondary displays - rear-seat entertainment, HVAC control, and instrument-cluster sub-displays. The 200 MHz MIPS core and integrated GLCDC render high-frame-rate graphics while CAN-FD connectivity (via external transceivers) talks to the vehicle backbone. Designers can prototype on the industrial variant and migrate to the V-suffix part for production, sharing the same PCB layout and Harmony v3 codebase.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1064DAL176T-I/2J — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1064DAB176-I/2J | PIC32MZ1064DAG176T-I/2J | PIC32MZ1025DAL176-I/2J | PIC32MZ1064DAL176-I/2J | PIC32MZ2064DAL176T-V/2J |
|---|---|---|---|---|---|---|
| Package | 176-LQFP (20x20 mm) | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same | 176-LQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Graphics LCD Controller | Integrated, up to WXGA | Integrated, sub-WVGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA | Integrated, up to WXGA |
| DDR2 EBI Support | Yes (16-bit) | No | Yes | Yes | Yes | Yes |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Automotive -40C to +125C (AEC-Q100) |
| Packaging | Tape & Reel | Tray | Tape & Reel | Tray | Tray | Tape & Reel |
Principaux différenciateurs
- Highest Flash density in 176-LQFP PIC32MZ DAL lineup (vs PIC32MZ1025DAL176-I/2J)
- Industrial temperature grade with full peripheral set (vs PIC32MZ1064DAB176-I/2J)
- Same 176-LQFP pinout enables PCB reuse across grades (vs PIC32MZ2064DAL176T-V/2J)
Notes de conception
Estimated: At full peripheral utilization (CPU + GLCDC + USB + Ethernet), the PIC32MZ1064DAL176T-I/2J can dissipate up to 1.5W. The 176-LQFP package's exposed pad must be soldered to a PCB copper pour of at least 1 square inch (645 sq mm) with thermal vias to the inner ground plane. Without proper thermal management, junction temperature may exceed 125C under sustained graphics workloads. Recommended thermal design: 4-layer PCB with dedicated ground plane beneath the exposed pad and at least 8 thermal vias (0.3 mm drill).
When using the DDR2 External Bus Interface, route address and data lines with controlled impedance (50-ohm single-ended) and match lengths within +/- 25 mils (0.635 mm). Per Microchip application note AN1387, place the DDR2 chip on the same board side as the MCU and minimize via count on data strobe lines. Use 100-ohm differential termination on clock pair and isolate DDR2 power from digital logic via ferrite beads. Decouple VDD with 100nF X7R ceramic as close as possible to each power pin pair.
Do not skip the ENVREG pin capacitor - the internal 1.2V core LDO requires a 10uF ceramic on ENVREG to VSS. Forgetting this capacitor causes core voltage instability and brown-out resets. Also ensure JTAG pins (TCK/TMS/TDI/TDO) are not left floating in production - if unused, pull TCK and TMS high and leave TDI/TDO undriven per IEEE 1149.1. Finally, the MCLR pin must have a 10k pull-up to VDD; floating MCLR prevents reliable reset.
The USB 2.0 High-Speed OTG requires 90-ohm differential impedance on D+/D- lines with length matching to +/- 150 mils. Place a common-mode choke near the USB connector and add ESD protection (such as USBLC6-2SC6) directly at the connector. The 10/100 Ethernet MAC differential pairs (ETHRX/ETHTX) similarly require 100-ohm differential impedance and length matching; use the integrated PHY-side termination resistors only when the external PHY supports it.
Informations de conformité
Industrial grade -40C to +85C, not AEC-Q100 qualified. Choose V-suffix variant (e.g., PIC32MZ2064DAL176T-V/2J) for automotive. RoHS compliant per Microchip product declaration.