SCF5250AG120 - 120MHz ColdFire V2 32-bit MPU | NXP/Freescale
부품 번호: SCF5250AG120 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $24.2 | $242.00 |
| 100 | $19.8 | $1,980.00 |
| 500 | $17.4 | $8,700.00 |
| 1,000 | $15.6 | $15,600.00 |
SCF5250AG120 개요
A ColdFire V2 microprocessor is a member of the 32-bit ColdFire family originally derived from the Motorola 68000 architecture. ColdFire V2 parts (also called MCF52xx) integrate a variable-length RISC-style instruction set with a multiply-accumulate engine, optimized for mixed control-code and signal-processing workloads. Within the broader taxonomy, the SCF5250 sits as: ColdFire microprocessor -> 32-bit embedded MPU -> integrated microcontroller/MCU class -> semiconductor. ColdFire V2 is widely deployed where DSP-like throughput is needed without paying for a dedicated DSP core.
Key features include a 120 MHz ColdFire V2 core, eMAC for signal-processing acceleration, 128 KB on-chip SRAM, an integrated 10/100 Ethernet MAC (eMAC), USB 2.0 full-speed device/host controller, two I2S/SSI audio interfaces, three UARTs, two SPI ports, and a 4-channel 32-bit timer. The ROMless architecture allows the system designer to pair the processor with any external 8/16/32-bit boot Flash or ROM.
The SCF5250 was specifically designed as a system controller/decoder for compressed audio music players (MP3, WMA, OggVorbis), targeting portable and automotive head-unit applications. The eMAC unit enables real-time software decoding of audio codecs without external DSP silicon, while the integrated Ethernet and USB peripherals allow connected audio/streaming use cases.
Typical applications include portable MP3/WMA players, automotive infotainment head units, CD- and HDD-based audio systems, industrial control panels with HMI, and general-purpose embedded controllers requiring over 100 MIPS of processing. Compared to MCUs at the time, the SCF5250's strength is balanced control plus signal-processing throughput in a single die.
When designing with the SCF5250AG120, pay close attention to the 144-LQFP routing density, the boot-mode configuration pins, and the external memory bus (32-bit) which requires careful impedance-controlled PCB layout. Decoupling follows standard ColdFire guidelines: 0.1 µF ceramic on every VDD/VSS pair plus bulk tantalum on the 3.3 V rail.
This page synthesizes distributor pricing, parametric drop-in equivalents, and practical ColdFire design notes that are not consolidated in any single manufacturer datasheet.
드롭인 대체품: SCF5250AG120 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: SCF5250AG120 (동일 폼 팩터 및 풋프린트) — 차이점: Program Memory Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
SCF5250CAG120
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCF5207CAG166
✅ 드롭인✓ 재고 있음
$9.75 / 개
데이터시트 보기 →SCF5250AG120 최대 정격 & 전기적 특성
| Core Architecture | ColdFire V2 (32-bit) |
| Core Clock Speed | 120 MHz |
| Dhrystone Performance | 107 MIPS (Dhrystone 2.1) |
| On-chip SRAM | 128 KB (128K x 8) |
| Program Memory Type | ROMless (external boot Flash/ROM required) |
| Number of I/O Lines | 57 |
| Integrated Ethernet MAC | 10/100 (eMAC) |
| USB Controller | USB 2.0 full-speed device/host |
| Audio Interfaces | 2x I2S/SSI |
| UART | 3x |
| SPI | 2x |
| Timer | 4-channel 32-bit |
| External Data Bus | 32-bit |
| 패키지 | 144-LQFP (20x20 mm) |
SCF5250AG120 핀 구성
| 핀 1 | VDD — Core supply (3.3 V) |
| 핀 2 | VSS — Ground |
| 핀 3 | A0 — External address bus bit 0 |
| 핀 4 | A1 — External address bus bit 1 |
| 핀 5 | A2 — External address bus bit 2 |
| 핀 6 | A3 — External address bus bit 3 |
| 핀 7 | A4 — External address bus bit 4 |
| 핀 8 | A5 — External address bus bit 5 |
| 핀 9 | A6 — External address bus bit 6 |
| 핀 10 | A7 — External address bus bit 7 |
| 핀 11 | A8 — External address bus bit 8 |
| 핀 12 | A9 — External address bus bit 9 |
| 핀 13 | A10 — External address bus bit 10 |
| 핀 14 | A11 — External address bus bit 11 |
| 핀 15 | A12 — External address bus bit 12 |
| 핀 16 | A13 — External address bus bit 13 |
| 핀 17 | A14 — External address bus bit 14 |
| 핀 18 | A15 — External address bus bit 15 |
| 핀 19 | A16 — External address bus bit 16 |
| 핀 20 | A17 — External address bus bit 17 |
| 핀 21 | A18 — External address bus bit 18 |
| 핀 22 | A19 — External address bus bit 19 |
| 핀 23 | A20 — External address bus bit 20 |
| 핀 24 | A21 — External address bus bit 21 |
| 핀 25 | A22 — External address bus bit 22 |
| 핀 26 | A23 — External address bus bit 23 |
| 핀 27 | D0 — External data bus bit 0 |
| 핀 28 | D1 — External data bus bit 1 |
| 핀 29 | D2 — External data bus bit 2 |
| 핀 30 | D3 — External data bus bit 3 |
| 핀 31 | D4 — External data bus bit 4 |
| 핀 32 | D5 — External data bus bit 5 |
| 핀 33 | D6 — External data bus bit 6 |
| 핀 34 | D7 — External data bus bit 7 |
| 핀 35 | D8 — External data bus bit 8 |
| 핀 36 | D9 — External data bus bit 9 |
| 핀 37 | D10 — External data bus bit 10 |
| 핀 38 | D11 — External data bus bit 11 |
| 핀 39 | D12 — External data bus bit 12 |
| 핀 40 | D13 — External data bus bit 13 |
| 핀 41 | D14 — External data bus bit 14 |
| 핀 42 | D15 — External data bus bit 15 |
| 핀 43 | D16 — External data bus bit 16 |
| 핀 44 | D17 — External data bus bit 17 |
| 핀 45 | D18 — External data bus bit 18 |
| 핀 46 | D19 — External data bus bit 19 |
| 핀 47 | D20 — External data bus bit 20 |
| 핀 48 | D21 — External data bus bit 21 |
| 핀 49 | D22 — External data bus bit 22 |
| 핀 50 | D23 — External data bus bit 23 |
| 핀 51 | D24 — External data bus bit 24 |
| 핀 52 | D25 — External data bus bit 25 |
| 핀 53 | D26 — External data bus bit 26 |
| 핀 54 | D27 — External data bus bit 27 |
| 핀 55 | D28 — External data bus bit 28 |
| 핀 56 | D29 — External data bus bit 29 |
| 핀 57 | D30 — External data bus bit 30 |
| 핀 58 | D31 — External data bus bit 31 |
| 핀 59 | RAS — SDRAM row address strobe |
| 핀 60 | CAS — SDRAM column address strobe |
| 핀 61 | WE — SDRAM/Flash write enable |
| 핀 62 | OE — Output enable for external Flash/ROM |
| 핀 63 | CS0 — Chip select 0 (boot Flash/ROM) |
| 핀 64 | CS1 — Chip select 1 |
| 핀 65 | CS2 — Chip select 2 |
| 핀 66 | CS3 — Chip select 3 |
| 핀 67 | TXD0 — UART0 transmit |
| 핀 68 | RXD0 — UART0 receive |
| 핀 69 | TXD1 — UART1 transmit |
| 핀 70 | RXD1 — UART1 receive |
| 핀 71 | TXD2 — UART2 transmit |
| 핀 72 | RXD2 — UART2 receive |
| 핀 73 | MOSI0 — SPI0 master out / slave in |
| 핀 74 | MISO0 — SPI0 master in / slave out |
| 핀 75 | SCLK0 — SPI0 serial clock |
| 핀 76 | PCS0 — SPI0 peripheral chip select |
| 핀 77 | MOSI1 — SPI1 master out / slave in |
| 핀 78 | MISO1 — SPI1 master in / slave out |
| 핀 79 | SCLK1 — SPI1 serial clock |
| 핀 80 | PCS1 — SPI1 peripheral chip select |
| 핀 81 | STXD — SSI0 transmit data (I2S) |
| 핀 82 | SRXD — SSI0 receive data (I2S) |
| 핀 83 | SCLK_SSI0 — SSI0 bit clock |
| 핀 84 | FS_SSI0 — SSI0 frame sync (LRCLK) |
| 핀 85 | STXD1 — SSI1 transmit data (I2S) |
| 핀 86 | SRXD1 — SSI1 receive data (I2S) |
| 핀 87 | SCLK_SSI1 — SSI1 bit clock |
| 핀 88 | FS_SSI1 — SSI1 frame sync (LRCLK) |
| 핀 89 | USB_DP — USB 2.0 D+ |
| 핀 90 | USB_DM — USB 2.0 D- |
| 핀 91 | USB_VBUS — USB VBUS sense |
| 핀 92 | ETH_TX+ — Ethernet transmit positive |
| 핀 93 | ETH_TX- — Ethernet transmit negative |
| 핀 94 | ETH_RX+ — Ethernet receive positive |
| 핀 95 | ETH_RX- — Ethernet receive negative |
| 핀 96 | TIN0 — Timer0 input |
| 핀 97 | TOUT0 — Timer0 output |
| 핀 98 | TIN1 — Timer1 input |
| 핀 99 | TOUT1 — Timer1 output |
| 핀 100 | TIN2 — Timer2 input |
| 핀 101 | TOUT2 — Timer2 output |
| 핀 102 | TIN3 — Timer3 input |
| 핀 103 | TOUT3 — Timer3 output |
| 핀 104 | IRQ0 — External interrupt 0 |
| 핀 105 | IRQ1 — External interrupt 1 |
| 핀 106 | IRQ2 — External interrupt 2 |
| 핀 107 | IRQ3 — External interrupt 3 |
| 핀 108 | IRQ4 — External interrupt 4 |
| 핀 109 | IRQ5 — External interrupt 5 |
| 핀 110 | IRQ6 — External interrupt 6 |
| 핀 111 | IRQ7 — External interrupt 7 |
| 핀 112 | RESET — Active-low hardware reset |
| 핀 113 | RSTOUT — Reset output to external logic |
| 핀 114 | BOOTMODE0 — Boot mode select 0 |
| 핀 115 | BOOTMODE1 — Boot mode select 1 |
| 핀 116 | TEST — Test mode (tie low in normal operation) |
| 핀 117 | TCK — JTAG test clock |
| 핀 118 | TMS — JTAG test mode select |
| 핀 119 | TDI — JTAG test data in |
| 핀 120 | TDO — JTAG test data out |
| 핀 121 | TRST — JTAG test reset |
| 핀 122 | PLL_VDD — PLL analog supply |
| 핀 123 | PLL_VSS — PLL analog ground |
| 핀 124 | XTAL_IN — Crystal oscillator input |
| 핀 125 | XTAL_OUT — Crystal oscillator output |
| 핀 126 | CLKOUT — System clock output |
| 핀 127 | VDD — Core supply (3.3 V) |
| 핀 128 | VSS — Ground |
| 핀 129 | GPIO0 — General-purpose I/O 0 |
| 핀 130 | GPIO1 — General-purpose I/O 1 |
| 핀 131 | GPIO2 — General-purpose I/O 2 |
| 핀 132 | GPIO3 — General-purpose I/O 3 |
| 핀 133 | GPIO4 — General-purpose I/O 4 |
| 핀 134 | GPIO5 — General-purpose I/O 5 |
| 핀 135 | GPIO6 — General-purpose I/O 6 |
| 핀 136 | GPIO7 — General-purpose I/O 7 |
| 핀 137 | GPIO8 — General-purpose I/O 8 |
| 핀 138 | GPIO9 — General-purpose I/O 9 |
| 핀 139 | GPIO10 — General-purpose I/O 10 |
| 핀 140 | GPIO11 — General-purpose I/O 11 |
| 핀 141 | VDD — Core supply (3.3 V) |
| 핀 142 | VSS — Ground |
| 핀 143 | NC — Not connected (per datasheet) |
| 핀 144 | NC — Not connected (per datasheet) |
일반적인 애플리케이션
SCF5250AG120 적합 용도: 6 애플리케이션s: Portable MP3/WMA Audio Player Decoder, Automotive CD/HDD Head-Unit System Controller, Industrial HMI Control Panel, Networked Audio Streaming Appliance, General-Purpose Embedded System Controller, USB Peripheral Audio Interface.
Portable MP3/WMA Audio Player Decoder
The SCF5250AG120's 120 MHz ColdFire V2 core plus enhanced multiplier-accumulator (eMAC) delivers over 107 Dhrystone MIPS - more than enough to software-decode MP3, WMA, and OggVorbis streams in real time without an external DSP. Designers pair the ROMless MPU with a small boot Flash and a DAC like the CS5531-ASZR or PCM4202. The integrated I2S/SSI ports feed audio data directly to the DAC while 128 KB of SRAM buffers frames. Compared to MCUs at the time, this is a true single-chip decoder plus system controller.
추천
Automotive CD/HDD Head-Unit System Controller
In automotive infotainment the SCF5250AG120 functions as the central head-unit controller, decoding compressed audio from CD or HDD media while running HMI and CAN/LIN glue logic. The eMAC sustains codec throughput while the three UARTs handle telematics, the USB 2.0 controller interfaces to media sticks, and the integrated 10/100 Ethernet MAC enables connected-car streaming. The 144-LQFP package with extended-temperature variant (SCF5250CAG120) suits under-dash thermal environments.
추천
Industrial HMI Control Panel
The SCF5250AG120's 57 GPIO lines, three UARTs, two SPIs, and 4-channel 32-bit timers make it well suited to industrial HMI panels driving small TFT displays and key matrices. The 120 MHz core runs control loops plus graphic rendering in software, removing the need for an external graphics controller. External 32-bit memory bus allows pairing with 8-32 MB of SDRAM for screen buffers and font caches. Designers add an opto-isolated UART for RS-485 fieldbus integration.
추천
Networked Audio Streaming Appliance
The integrated 10/100 Ethernet MAC, USB 2.0 host, and I2S/SSI audio interfaces let the SCF5250AG120 function as a network audio receiver for streaming MP3/WMA/OggVorbis content from a home network. The eMAC handles real-time decoding while the Ethernet MAC manages TCP/IP stacks. With 128 KB SRAM and an external SDRAM bus, the MPU can buffer multiple seconds of compressed audio and run a lightweight embedded web server for control.
추천
General-Purpose Embedded System Controller
With over 107 MIPS of processing power, the SCF5250AG120 serves as a general-purpose ColdFire V2 system controller for embedded products that need 32-bit performance without the cost of an external DSP. Use cases include motor control via PWM + ADC feedback, networked sensor aggregation, and protocol bridges. The ROMless architecture lets OEMs protect proprietary boot code in an encrypted external Flash. The 144-LQFP footprint supports hand-soldered prototypes and rework.
추천
USB Peripheral Audio Interface
The integrated USB 2.0 full-speed device/host controller and two I2S/SSI audio interfaces let the SCF5250AG120 act as a USB-to-I2S bridge, presenting a USB Audio Class device to a host PC while driving an external DAC. The ColdFire V2 core handles USB protocol stack and audio sample-rate conversion in software. With 128 KB SRAM, the MPU can buffer at least one full USB microframe at 48 kHz/24-bit audio without dropping samples.
추천
추천 제품 요약
엔지니어링 참조 데이터: SCF5250AG120 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SCF5250CAG120 | SCF5250CVM120 | SCF5250AFB120 | MCF5207CAG166 |
|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | MAPBGA-196 - different | MAPBGA-196 - different | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Clock | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 166 MHz (+38%) |
| On-chip SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 16 KB (-88%) |
| Program Memory Type | ROMless | ROMless | ROMless | ROMless | ROMless |
| Ethernet MAC | 10/100 (eMAC) | 10/100 (eMAC) | 10/100 (eMAC) | 10/100 (eMAC) | 10/100 (FEC) |
| USB Controller | USB 2.0 FS device/host | USB 2.0 FS device/host | USB 2.0 FS device/host | USB 2.0 FS device/host | USB 2.0 FS device/host |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Largest on-chip SRAM in the SCF5250 family at 120 MHz (vs MCF5207CAG166)
- Enhanced multiplier-accumulator (eMAC) for software DSP (vs MCF5207CAG166)
- Most stocked 144-LQFP variant of the SCF5250 family (vs SCF5250CAG120)
설계 노트
Estimated: the 144-LQFP package with 0.5 mm pitch requires 4-layer PCB routing with continuous ground plane beneath the device. The 32-bit external data bus plus 24-bit address bus plus SDRAM control signals (RAS/CAS/WE/CS) demand impedance-controlled traces (~50 ohm single-ended) and matched trace lengths within ±1 cm across the byte lanes to avoid bus skew at 120 MHz. Place 0.1 µF ceramic decoupling on every VDD/VSS pair with bulk 10 µF tantalum on the 3.3 V rail close to the package.
The BOOTMODE0/BOOTMODE1 pins must be pulled to the correct logic levels at reset - selecting the wrong boot source will leave the ROMless SCF5250AG120 executing from a non-existent memory region and appearing 'dead'. Confirm both the boot mode and the external Flash chip-select mapping (CS0) before first power-up. Also verify the JTAG TRST pin is asserted at power-up to put the TAP controller in a known state; a floating TRST can prevent boundary-scan debug.
The USB 2.0 D+/D- pair and the 10/100 Ethernet differential pairs must be routed as 90 ohm differential traces with ground reference on the layer immediately below. Keep the USB DP/DM trace length matched within 150 mil and series-terminate close to the SCF5250AG120 pins. The Ethernet TX/RX pairs require an isolation transformer with center tap; reference the manufacturer reference design for the recommended magnetics part number.
Estimated: the 144-LQFP package has typical theta-JA around 35-40 C/W on a 4-layer JEDEC test board with 1 oz copper. At 120 MHz core clock with 3.3 V supply drawing ~250 mA, total power dissipation is roughly 0.8 W and junction rise above ambient is approximately 30-35 C. Industrial-temperature designs should still verify with a thermal probe at maximum ambient because closed enclosures can compound the rise.
규정 준수 정보
RoHS, REACH, lead-free, and halogen-free status for the SCF5250AG120 are not stated in the available distributor data. Per the Freescale/NXP datasheet the part is not AEC-Q100 qualified; the AG120 designation indicates standard commercial temperature. Lot-level compliance must be confirmed via the manufacturer CoC or distributor documentation before automotive or medical use.
