SPC5200CVR400 - 400MHz PowerPC G2_LE MPU | NXP | 272-BGA
부품 번호: SPC5200CVR400 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $31.5 | $31.50 |
| 10 | $28.2 | $282.00 |
| 100 | $24.75 | $2,475.00 |
| 500 | $22.1 | $11,050.00 |
| 1,000 | $19.8 | $19,800.00 |
SPC5200CVR400 개요
An embedded microprocessor (MPU) is a CPU-centric system-on-chip that integrates processing, memory interfaces, and a broad set of peripheral controllers onto a single die. Within the broader taxonomy, the MPC5200 belongs to the PowerPC embedded microprocessor family, a superset of 32-bit RISC CPUs historically deployed in networking and industrial systems. Its G2_LE core variant trades raw single-thread throughput for superior integer performance-per-watt, making it ideal for deterministic real-time workloads.
Key features of the SPC5200CVR400 include the 400 MHz G2_LE core with 32 KB instruction cache and 16 KB data cache, an integrated double-data-rate (DDR) SDRAM memory controller, dual Fast Ethernet MACs, dual USB 1.1 OHCI controllers, dual CAN 2.0B controllers, an ATA/ATAPI-5 interface, AC97 and I2S digital audio interfaces, an enhanced programmable serial controller supporting SPI and UART, and a BestComm DMA engine for offloading core transfers. The industrial-grade temperature range (-40 °C to +85 °C) allows deployment in factory environments without additional thermal hardening.
Architecturally, the MPC5200 integrates the e300 core (PowerPC G2_LE) with a unified 32-bit peripheral and memory bus, plus a dedicated local bus for glueless external peripherals. The on-chip BestComm DMA engine performs descriptor-driven scatter-gather transfers, freeing the CPU for application code and reducing average interrupt load in storage and networked use cases.
Typical applications for the SPC5200CVR400 include industrial control and HMI gateways, in-vehicle telematics and infotainment head units, networked printers and MFP controllers, residential gateway routers, and point-of-sale terminals. The combination of Fast Ethernet, CAN, USB, and ATA peripherals in a single BGA addresses these designs without external glue logic.
When designing with the SPC5200CVR400, ensure PCB layout accommodates the 27 x 27 mm PBGA thermal pad with adequate via stitching to the inner ground plane for proper heat dissipation. The supply rail sequence (core 1.5 V then I/O 3.3 V) must be respected, and unused pins should be left as no-connects per the reference manual. Industrial users must verify their firmware supports the slightly older G2_LE core versus newer MPC5125 or i.MX6 migration paths suggested by NXP.
This page synthesizes distributor pricing from DigiKey, parametric drops-in across the SPC5200 family, and practical design notes not aggregated elsewhere on the web.
드롭인 대체품: SPC5200CVR400 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: SPC5200CVR400 (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
SPC5200CVR400B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC5200CVR400B
✅ 드롭인✓ 재고 있음
$24.8 / 개
데이터시트 보기 →MPC5200VR400B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SPC5200CBV400B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC5200CVR400BR2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC5200CVR400B
✅ 드롭인✓ 재고 있음
$24.8 / 개
데이터시트 보기 →SPC5200CVR400 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors (formerly Freescale/Motorola) |
| Part Family | MPC5200 (PowerPC G2_LE) |
| Core Architecture | PowerPC e300 (G2_LE), 32-bit RISC |
| Number of Cores | 1 |
| Maximum Core Frequency | 400 MHz |
| 패키지 | 272-PBGA (27 x 27 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40 C to +85 C (Industrial) |
| Lead Free | Yes (LEAD-FREE INDUSTRIAL-QUAL) |
| Instruction Cache | 32 KB |
| Data Cache | 16 KB |
| Memory Interface | DDR SDRAM controller |
| Ethernet | 2 x 10/100 Fast Ethernet MAC |
| USB | 2 x USB 1.1 OHCI Host |
| CAN | 2 x CAN 2.0B |
| Storage | ATA / ATAPI-5 |
| Audio | AC97 / I2S |
SPC5200CVR400 272-pbga (27 x 27 mm) 핀 구성 가이드
SPC5200CVR400(272-pbga (27 x 27 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: SPC5200CVR400.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
SPC5200CVR400 적합 용도: 6 애플리케이션s: Industrial Control & HMI Gateway, In-Vehicle Telematics & Infotainment Head Unit, Networked Multifunction Printer / MFP Controller, Residential Gateway / SOHO Router, Point-of-Sale (POS) Terminal, Industrial Networking Switch Management Module.
Industrial Control & HMI Gateway
The SPC5200CVR400's 400 MHz PowerPC e300 core, 32 KB I-cache, and 16 KB D-cache deliver the integer performance required for deterministic PLC scan loops while leaving headroom for embedded HMI graphics stacks. The integrated dual 10/100 Ethernet MACs and dual CAN 2.0B controllers allow a single chip to act as a CANopen master bridged to Modbus TCP, exactly the role this part was architected for. The BestComm DMA engine offloads high-throughput background transfers (e.g., data logging to ATA) so the e300 core stays responsive to real-time interrupts. Operated from -40 C to +85 C with a lead-free PBGA, it is well suited to factory-floor controller cabinets where a single SoC replaces an MCU plus an external PHY.
추천
In-Vehicle Telematics & Infotainment Head Unit
The SPC5200CVR400's CAN 2.0B controllers, AC97/I2S audio interfaces, ATA/ATAPI storage stack, and dual USB 1.1 OHCI hosts map directly onto automotive telematics and entry-level infotainment head units. The dual CAN buses read OBD-II and body CAN frames simultaneously, while the AC97 codec delivers hands-free voice and the ATA channel streams map data. The 27 x 27 mm PBGA with lead-free industrial-qual finish survives the under-hood thermal envelope of cabin-mounted equipment. Although NXP designates the MPC5200 line obsolete for new automotive designs, existing fleet programs qualify the SPC5200CVR400 for aftermarket and head-unit service production.
추천
Networked Multifunction Printer / MFP Controller
Office MFP controllers typically need a single SoC to scan to network, drive the engine, and run a Linux- or VxWorks-based UI - exactly the workload the SPC5200CVR400 was designed for. The dual 10/100 Ethernet MACs aggregate scanner data and downstream printing traffic, while the ATA/ATAPI-5 host bus connects directly to a PATA hard drive or DOM for image storage. The AC97/I2S interface accommodates speakerphone audio for fax line monitoring. BestComm DMA offloads engine image transfers without consuming CPU cycles, so scan throughput scales with the 400 MHz core rather than interrupt latency.
추천
Residential Gateway / SOHO Router
The SPC5200CVR400's combination of dual 10/100 Ethernet MACs and USB 1.1 OHCI host ports was a hallmark of the SOHO router reference designs NXP shipped in the late 2000s. Designers wired one MAC to the WAN PHY and the second to a 4-port switch fabric, while the USB ports served as print server or 3G/4G modem attachments. The PowerPC e300 core runs embedded Linux with NAT and firewall stacks at wire speed for 100 Mbps links, and the industrial temperature grade accommodates closet-mounted hardware. Although superseded by i.MX6 and Layerscape platforms, legacy residential gateway SKUs continue to source SPC5200CVR400 as the qualified controller.
추천
Point-of-Sale (POS) Terminal
POS terminals integrate a CPU, dual Ethernet (one for LAN, one for the payment processor tunnel), USB peripherals (barcode scanner, receipt printer), and often a CAN stack for drawer control - all of which the SPC5200CVR400 covers natively. The 400 MHz e300 core runs the Java/Linux POS application, while BestComm DMA keeps the receipt-printer pipe full and the magnetic-stripe reader latency predictable. The ATA port drives a DOM holding the OS image and transaction journal, and the industrial thermal rating keeps the unit cold-tolerant for outdoor kiosk deployments.
추천
Industrial Networking Switch Management Module
Managed industrial switches historically leveraged the SPC5200CVR400 as a control-plane CPU running SNMP, RSTP, and IGMP snooping while an external switch ASIC handled line-rate traffic. The dual Ethernet MACs connect to the switch ASIC's management port and an out-of-band Ethernet service port, while the CAN and serial controllers provide field-service diagnostics. The DDR SDRAM controller holds routing tables and ACL lists, and the ATA host boots the management firmware from a CompactFlash-style DOM. Although modern designs use Linux-capable Layerscape parts, the SPC5200CVR400 remains qualified in long-lifecycle rail and energy automation products.
추천
추천 제품 요약
엔지니어링 참조 데이터: SPC5200CVR400 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | SPC5200CVR400B | MPC5200CVR400B | MPC5200VR400B | SPC5200CBV400B | MPC5200CVR400 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 272-PBGA (27 x 27 mm) | 272-PBGA (27 x 27 mm) - same | 272-PBGA (27 x 27 mm) - same | 272-PBGA (27 x 27 mm) - same | 272-PBGA (27 x 27 mm) - same | 272-PBGA (27 x 27 mm) - same |
| Core Frequency | 400 MHz | 400 MHz | 400 MHz | 400 MHz | 400 MHz | 400 MHz |
| Architecture | PowerPC e300 (G2_LE) 32-bit | PowerPC e300 (G2_LE) 32-bit | PowerPC e300 (G2_LE) 32-bit | PowerPC e300 (G2_LE) 32-bit | PowerPC e300 (G2_LE) 32-bit | PowerPC e300 (G2_LE) 32-bit |
| Silicon Revision | Original (pre-B) | B (updated SDRAM controller) | B (updated SDRAM controller) | B (updated SDRAM controller) | B (updated SDRAM controller) | Original (pre-B) |
| Temperature Grade | Industrial (-40 to +85 C) | Industrial (-40 to +85 C) | Industrial (-40 to +85 C) | Industrial (-40 to +85 C) | Commercial (0 to +70 C) | Industrial (-40 to +85 C) |
| Lifecycle | Obsolete | Obsolete | Obsolete (NRND) | Obsolete | Obsolete | Obsolete |
| Order Code Prefix | SPC (Freescale legacy) | SPC | MPC (NXP standard) | MPC (NXP standard) | SPC | MPC (NXP standard) |
주요 차별점
- Same silicon, formal B-silicon revision upgrade (vs SPC5200CVR400B)
- NXP-preferred orderable part number for new B-silicon orders (vs MPC5200CVR400B)
- Same silicon, alternative audio peripheral mix ordering code (vs MPC5200VR400B)
- Commercial temperature variant for indoor products (vs SPC5200CBV400B)
설계 노트
The 272-BGA package has an exposed thermal pad on the bottom that MUST be soldered to a 27 x 27 mm land on the top PCB layer with a via array dropping to the inner ground plane. Stitched vias on 1.0 - 1.2 mm pitch provide both thermal and electrical grounding; without them the junction temperature of the e300 core can exceed 100 C even at the 400 MHz industrial operating point. A copper pour area of at least 1 sq inch per side is recommended.
The SPC5200CVR400 requires a sequenced power-up: 1.5 V core must ramp before 3.3 V I/O, with the 3.3 V rail at no more than 0.3 V ahead to prevent I/O latch-up. Use a TPS3823 or equivalent supervisor on the 3.3 V rail with a 200 ms minimum reset pulse, and connect PORESET to the supervisor's active-low output. The DDR SDRAM controller additionally needs a 2.5 V VTT termination rail that follows the 1.5 V core ramp.
DDR traces must be routed as 50 ohm single-ended with 100 ohm differential between the + and - nets; keep trace lengths matched within 0.5 mm to avoid setup/hold violations at DDR-266. The dual 10/100 Ethernet MACs should connect to their PHYs via short, impedance-controlled MII/RMII traces no longer than 100 mm. Place a 0.1 uF + 10 uF decoupling pair within 5 mm of every power pin to suppress switching noise.
Several known errata affect the original SPC5200CVR400 silicon (pre-B): the e300 core boot vector behavior on cold reset and a BestComm descriptor stall condition. Designers reproducing legacy boards should consult NXP application note AN3045 before qualifying firmware against the original revision, or move to the B-silicon drop-in alternative SPC5200CVR400B / MPC5200CVR400B which fixes these defects while keeping the same 272-BGA pinout.
규정 준수 정보
Part marking explicitly indicates LEAD-FREE INDUSTRIAL-QUAL finish. Formal RoHS, REACH, and AEC-Q100 declarations were not present in the verified web data; values flagged as 'unknown'. AEC-Q100 is reported as 'not_qualified' because the MPC5200 family was not designed against automotive AEC-Q100 grade 1 - automotive deployments typically use the MPC5125 or automotive-specific derivatives.
