STM32F031G6U6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
부품 번호: STM32F031G6U6 ✓ 활성STM32F031G6U6 개요
A microcontroller is an integrated circuit containing a processor core, nonvolatile program memory, volatile working memory, peripherals, and input/output circuitry. The STM32F031G6U6 belongs to the STM32F0 family and sits within the broader hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M processor, and semiconductor. Its compact package and mixed-signal peripherals make it suitable for cost-sensitive control, sensing, communication, and motor-adjacent products.
The principal resources include 32 KB of Flash, 4 KB of SRAM, and a maximum CPU frequency of 48 MHz. Its communication peripherals comprise one I2C interface, one SPI or I2S interface, and one USART. For analog measurements, the MCU includes one 12-bit ADC. Nine timers support periodic timing, input capture, output compare, PWM generation, and other time-dependent control functions. These resources allow the MCU to consolidate several discrete functions on a single board.
The STM32F031G6U6 uses an Arm Cortex-M0 core with a 32-bit RISC architecture. The core executes compact firmware from embedded Flash while using SRAM for working data and the stack. Its 48 MHz maximum operating frequency provides useful headroom for digital control loops, serial protocol handling, and periodic sensor processing. The 12-bit ADC resolution is suitable for many industrial control, consumer accessory, and compact instrumentation applications where higher-resolution conversion is not required.
Typical uses include sensor-hub and environmental-monitoring nodes, small motor controllers, digital control panels, communication modules, and compact consumer products. Designers can use the I2C interface for sensors and EEPROMs, SPI or I2S for higher-speed peripherals or digital audio devices, and USART for point-to-point links. The nine timers allow multiple PWM or capture channels to be allocated without adding separate timing peripherals.
Board design should preserve clean separation between analog and digital returns, route sensitive ADC inputs away from switching nodes, and place decoupling capacitors close to the power pins. Firmware and peripheral assignments should be checked against the manufacturer pin description and pinout before PCB release. This page also organizes package, interface, memory, sourcing, and replacement considerations into a single engineering reference for design-in decisions.
The STM32F031G6U6 is best evaluated against the complete design rather than by clock speed alone. Verify voltage, memory, ADC, timer, serial-interface, package, and software requirements together. A lower-cost or newer-family device is only a drop-in replacement when its electrical limits, pin assignment, peripheral behavior, clock tree, firmware assumptions, and qualification requirements have all been reviewed against the original design.
드롭인 대체품: STM32F031G6U6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F031G6U6 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core, Product Type, Flash Memory, Maximum CPU Frequency.
STM32G031G6U6
✅ 드롭인가격 문의
데이터시트 보기 →HK32F031G6U6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F031G6U6 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M0 RISC microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| SRAM | 4 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| ADC Resolution | 12 bits |
| ADC Quantity | 1 |
| Timer Quantity | 9 |
| I2C Interface Quantity | 1 |
| SPI/I2S Interface Quantity | 1 |
| USART Quantity | 1 |
| Processor Architecture | 32-bit RISC |
| Core | Arm Cortex-M0 |
| 패키지 | UFQFPN-28 (4 x 4 mm) |
| 실장 유형 | Surface mount |
| Packaging Form | Tray |
STM32F031G6U6 ufqfpn-28 (4 x 4 mm) 핀 구성 가이드
STM32F031G6U6(ufqfpn-28 (4 x 4 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F031G6U6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F031G6U6 적합 용도: 6 애플리케이션s: Environmental Sensor Hubs, Compact Motor Control, Digital Control Panels, Serial Communication Modules, Battery-Powered Sensor Nodes, Compact Industrial Control.
Environmental Sensor Hubs
The STM32F031G6U6 fits compact environmental-monitoring products that combine several low-speed sensors with local data processing. Its one I2C interface can connect addressable temperature, humidity, pressure, or gas sensors, while the 48 MHz Cortex-M0 core handles acquisition logic and filtering between samples. The 32 KB Flash and 4 KB SRAM provide space for firmware, calibration tables, and a modest communication buffer. A designer should keep analog sensor traces away from digital switching paths and verify that the selected sensor voltage levels match the MCU's 2.0 V to 3.6 V operating range.
Compact Motor Control
The STM32F031G6U6 can serve as the control processor in small fans, pumps, valves, and actuator modules where its nine timers provide multiple timing and PWM resources. The 48 MHz Cortex-M0 core executes control logic and commutation routines, while the USART supports configuration and diagnostics. At 32 KB of Flash and 4 KB of SRAM, the device is appropriate for focused control firmware rather than elaborate graphics or large protocol stacks. Power-stage layout and transient protection must be designed separately so motor noise does not compromise ADC measurements or digital supply stability.
Digital Control Panels
A human-interface or equipment-control panel can use the STM32F031G6U6 to scan inputs, update indicators, enforce timing, and communicate with a host. Its nine timers support debouncing, periodic scanning, and output timing, while USART provides a simple command link. The 12-bit ADC can monitor panel-supply voltage or analog set points when conditioned appropriately. The 4 x 4 mm UFQFPN package supports compact assemblies, but exposed-pad layout and thermal performance should follow the manufacturer land pattern and assembly guidance.
Serial Communication Modules
The STM32F031G6U6 is appropriate for gateways, remote controls, and protocol converters requiring one asynchronous and one synchronous serial channel. USART can connect a host, radio, or service interface, while SPI or I2S supports a higher-speed peripheral or digital-audio path. The Cortex-M0 core at up to 48 MHz can perform framing, buffering, and protocol conversion without an external processor. Firmware designers should confirm the alternate-function mapping for the selected UFQFPN pins and validate timing margins under the maximum intended baud rate.
Battery-Powered Sensor Nodes
The STM32F031G6U6 can form the core of a compact battery-powered sensing node where limited memory and a broad 2.0 V to 3.6 V supply range are useful. Its timer resources support wake intervals and duty-cycled measurements, while the I2C interface can connect low-power sensors. Low-power performance, reset behavior, and analog accuracy must be characterized under the intended operating conditions because the core frequency alone does not determine standby consumption. The regulator, sensor, and RF subsystem should be coordinated to avoid rail transients during transmit or measurement events.
Compact Industrial Control
The STM32F031G6U6 is suitable for small industrial modules that monitor analog quantities and operate discrete outputs. One 12-bit ADC measures conditioned process signals, nine timers coordinate update rates and PWM outputs, and USART provides diagnostic access. The 32 KB Flash and 4 KB SRAM are adequate for a focused supervisory loop but require disciplined buffer sizing and code organization. Industrial implementations should add appropriate input protection, grounding, isolation or surge controls where required, and verify environmental operating limits against the manufacturer documentation.
엔지니어링 참조 데이터: STM32F031G6U6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32G031G6U6 | HK32F031G6U6 |
|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | HK32 |
| Package | UFQFPN-28 (4 x 4 mm) | UFQFPN-28 (4 x 4 mm) | UFQFPN-28 (4 x 4 mm) |
주요 차별점
- Established STM32F0 Cortex-M0 platform with 32 KB Flash and 4 KB SRAM (vs STM32G031G6U6)
- Documented cross-brand compatibility path on the same 28-pin footprint (vs HK32F031G6U6)
- Balanced peripheral set for compact embedded-control designs (vs STM32G031G6U6)
설계 노트
Use the manufacturer land pattern for the 28-pin UFQFPN and preserve its exposed-pad requirements. Place input and output decoupling capacitors close to the corresponding power pins, keep the exposed-pad connection consistent with the package drawing, and inspect the assembly stencil and paste design before production. The compact 4 x 4 mm outline saves area but leaves little tolerance for copper and solder-process variation.
Keep analog-input traces short and separated from switching and high-current return paths. Use a disciplined ground strategy so ADC reference and sensor returns do not share noisy current paths with digital outputs. Validate the ADC network with the source impedance and acquisition timing in mind; the integrated 12-bit converter does not remove the need for input conditioning, reference stability, and careful routing.
Do not treat a shared package as proof of drop-in equivalence. For STM32G031G6U6, confirm Cortex-M0+ behavior, peripheral mapping, clock configuration, startup code, and electrical limits. For HK32F031G6U6, the cross-reference specifically identifies ADC, clock, and low-power behavior for sample testing. Review the exact schematic pin assignments and complete firmware requirements before releasing either substitution to production.
Design the supply for the MCU's 2.0 V to 3.6 V operating range and verify startup and brownout behavior across the complete input range. Because the device combines digital control and an analog converter, evaluate supply ripple, reference settling, and transient response rather than checking only the nominal voltage. Use the manufacturer guidance for decoupling and analog reference connections, and include controlled test points for debugging.
규정 준수 정보
Compliance declarations were not identified in the manufacturer or distributor material for this exact orderable MPN. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before using the part in a regulated production program.