STM32F103ZCT7 - 72MHz 256KB Cortex-M3 MCU | STMicroelectronics
부품 번호: STM32F103ZCT7 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $12.95 | $12.95 |
| 10 | $11.8 | $118.00 |
| 100 | $10.45 | $1,045.00 |
| 500 | $8.9 | $4,450.00 |
| 1,000 | $7.65 | $7,650.00 |
STM32F103ZCT7 개요
What is an ARM Cortex-M3 microcontroller? An MCU combines a processor core, memory, and peripherals on one integrated circuit. The Cortex-M3 core provides a 32-bit instruction set and RISC-oriented embedded architecture, while the STM32F103 family integrates communication, timing, analog, and digital-control resources for applications spanning industrial equipment, communications, and mixed-signal control.
The STM32F103ZCT7 combines 72 MHz operation, 256 KB Flash, and a high pin count in one device. Verified distributor material also identifies the part as a 144-pin MCU and highlights USB, CAN, timer, ADC, and communication-interface resources. These peripherals make it suitable for systems combining control logic with protocol handling and analog measurement.
The STM32F103ZCT7 belongs to the STM32F103 high-density performance line. Its architecture supports connected embedded designs that need more GPIO and peripheral capacity than smaller STM32 packages. The 144-pin LQFP format provides extensive external connectivity, while the Cortex-M3 platform supports established embedded software tooling and real-time control workloads.
Typical applications include industrial controllers, USB-connected peripherals, CAN-based equipment, data-acquisition systems, timer-driven control platforms, and embedded communications equipment. In these systems, the microcontroller can coordinate sensors, actuators, protocol transceivers, and human-interface or debug connections through its broad pin and peripheral set.
A key design consideration is supply and decoupling planning. The verified data identifies 2.5 V and 3.3 V device variants, but detailed voltage ranges, pin-level electrical limits, clock configuration, memory map, and exact peripheral ratings were not supplied here and should be confirmed in the manufacturer datasheet before layout or firmware release. Firmware migration also requires validation of startup files, peripheral behavior, timing, and toolchain support.
This page combines verified distributor specifications, practical application context, package constraints, and sourcing guidance for engineers evaluating the STM32F103ZCT7. It is designed to make technical comparisons faster while clearly separating confirmed data from parameters that require datasheet verification.
드롭인 대체품: STM32F103ZCT7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F103ZCT7 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Organization, Mounting Type, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
GD32F103ZCT6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
GD32F103ZET6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
GD32F103RCT6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F103ZBT7
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F103ZDT7
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F103ZCT7 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| 최대 클록 주파수 | 72 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| Processor Architecture | ARM Cortex-M3 |
| Instruction Width | 32-bit |
| 패키지 | 144-pin LQFP |
| Supply Voltage Variant | 2.5 V / 3.3 V |
| Communication Interfaces | 13 communication interfaces |
| Timers | 11 timers |
| ADC Resources | 3 ADCs |
| USB Support | USB |
| CAN Support | CAN |
| Application Focus | Mixed-signal and timer-driven control |
| 실장 유형 | Surface-mount LQFP |
STM32F103ZCT7 144-pin lqfp 핀 구성 가이드
STM32F103ZCT7(144-pin lqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F103ZCT7.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F103ZCT7 적합 용도: 6 애플리케이션s: Industrial Control Systems, CAN-Connected Equipment, USB-Connected Embedded Products, Data-Acquisition and Monitoring, Timer-Driven Motor and Actuator Control, Human Interface and Embedded Networking Gateway.
Industrial Control Systems
STM32F103ZCT7 fits industrial controllers that combine real-time control with multiple external signals. Its verified 72 MHz Cortex-M3 core provides computational headroom for control logic, while the 144-pin LQFP package exposes a large number of connections for digital inputs, outputs, actuators, and status indicators. The family’s 11 timers and 3 ADCs are useful for periodic sequencing, sensing, and mixed-signal monitoring. A practical design would use dedicated CAN or network transceivers where required, isolated interfaces where required by the installation, and careful grounding between high-current actuator paths and low-level measurement circuits.
추천
CAN-Connected Equipment
The STM32F103ZCT7 is suitable for CAN-connected embedded equipment because the verified STM32F103 family listing identifies CAN support and a broad set of communication interfaces. The MCU can manage a communications protocol while timers handle periodic scheduling and ADCs provide local analog monitoring. In a practical node, the STM32F103ZCT7 would connect through a suitable CAN transceiver rather than directly to a bus. Board design must account for transceiver supply, termination, isolation requirements, common-mode voltage, ESD protection, and firmware timing. Because the supplied data does not specify CAN mode, baud-rate range, or transceiver pin mapping, those values must be taken from the official datasheet and selected transceiver documentation.
추천
USB-Connected Embedded Products
STM32F103ZCT7 can support USB-connected embedded products because USB is explicitly identified in the verified family description. The 72 MHz Cortex-M3 core is appropriate for combining protocol handling with application logic, while the 144-pin package leaves ample I/O for user controls, indicators, sensors, and external actuators. The USB implementation should be designed with the correct connector, protection, routing, and power-supply strategy for the target product. USB speed, device or host role, endpoint count, and exact alternate-function pins are not included in the supplied data and must be verified from the manufacturer datasheet before schematic capture.
추천
Data-Acquisition and Monitoring
The verified STM32F103 family resources of 3 ADCs and 11 timers make STM32F103ZCT7 a reasonable platform for data-acquisition and monitoring equipment. The high pin count can reduce multiplexing pressure when several sensors, amplifiers, and digital interfaces must coexist. ADCs can be paired with external signal conditioning while timers provide periodic sampling, filtering windows, or trigger coordination. The supplied information does not specify ADC resolution, input count, sample rate, reference voltage, or analog input impedance, so those details must be confirmed before selecting sensor amplifiers or defining measurement accuracy. Layout should separate analog and digital return paths and provide local decoupling near the MCU supply pins.
추천
Timer-Driven Motor and Actuator Control
STM32F103ZCT7 fits timer-driven control platforms where the MCU must coordinate multiple timing events and external actuators. The verified 72 MHz operating point provides processing capacity for scheduling and supervisory logic, while 11 timers support the family’s broad timing resource set. A practical motor-control system would also require power transistors, gate drivers, current sensing, protection, and a defined safety strategy. The supplied data does not identify timer channel counts, PWM frequency limits, encoder interfaces, or motor-control peripherals, so engineers must verify those details in the manufacturer datasheet. Use independent hardware shutdown paths where a software fault could otherwise leave an actuator energized.
추천
Human Interface and Embedded Networking Gateway
The STM32F103ZCT7 is suitable for embedded gateways that connect local controls to USB, CAN, or other communication interfaces. Its 144-pin LQFP package provides a high pin count for status LEDs, buttons, displays, configuration interfaces, and external protocol converters. The Cortex-M3 core and verified family peripherals allow application firmware, protocol handling, and supervisory control to share one device. A production design should include watchdog behavior, boot protection, firmware update strategy, connector protection, and defined recovery behavior after communication faults. The verified data does not include security peripherals or exact memory protections, so those requirements must be reviewed before exposing the device to untrusted networks.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F103ZCT7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | GD32F103ZCT6 | GD32F103ZET6 | GD32F103RCT6 | STM32F103ZBT7 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | GigaDevice | GigaDevice | GigaDevice | STMicroelectronics |
| Package | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP |
| Processor Core | ARM Cortex-M3 | Cortex-M3 family migration candidate | Cortex-M3 family migration candidate | Cortex-M3 family migration candidate | STM32F103 family |
주요 차별점
- Established STMicroelectronics STM32F103 platform with a verified 72 MHz Cortex-M3 configuration (vs GD32F103ZCT6)
- High-density 144-pin LQFP interface capacity (vs STM32F103ZBT7)
- Verified integrated connectivity for embedded control (vs GD32F103RCT6)
설계 노트
Use the verified 2.5 V and 3.3 V device-variant information as the starting point, then confirm the exact operating and absolute-maximum voltage ranges in the manufacturer datasheet. Place the required supply and bypass capacitors close to the corresponding power pins, with separate return paths for digital and analog loads. High-current actuators should not share narrow supply traces with sensitive measurement circuitry; use local regulation or filtering where the load can create large transients.
The 144-pin LQFP footprint gives the design many signals, but pin assignment must be checked against the official STM32F103ZCT7 pinout rather than inferred from package size. Reserve oscillator, reset, programming, power, ground, and debug connections according to the manufacturer recommendations. Confirm the mechanical drawing, pin pitch, body dimensions, and land pattern before fabrication, and maintain clearance between high-current switching paths and analog ADC inputs.
Do not treat a similar STM32F103 or GD32F103 order code as a drop-in substitute solely because the names are similar. Verify Flash size, SRAM, voltage range, temperature grade, pin multiplexing, USB and CAN behavior, timers, ADCs, clock limits, and firmware startup requirements. The supplied migration material reports GD32F103 compatibility potential and a 108 MHz versus 72 MHz difference, so timing and peripheral behavior should be revalidated before production release.
The verified data identifies USB, CAN, 11 timers, 3 ADCs, and 13 communication interfaces, but it does not provide complete operating details for each peripheral. Confirm alternate-function mapping, interrupt priorities, DMA behavior, timer channel assignments, and communication electrical requirements in the official documentation. Add a recovery path for firmware faults and use a hardware shutdown mechanism for actuators so a software failure cannot create an unsafe energized state.
규정 준수 정보
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Obtain current compliance documentation from STMicroelectronics or an authorized distributor for the exact orderable MPN.
