STM32F372VCH6 - 72MHz Cortex-M4 256KB MCU | STMicroelectronics
부품 번호: STM32F372VCH6 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
STM32F372VCH6 개요
A microcontroller is a semiconductor device that executes embedded software and coordinates sensors, actuators, communications, and user interfaces. In the product hierarchy, the STM32F372VCH6 is an MCU, an embedded processor, a semiconductor, and part of the broader embedded-control and industrial-control device categories. Its Cortex-M4 architecture supports efficient real-time control while integrating hardware peripherals for connected equipment.
Verified distributor information identifies a 32-bit ARM Cortex-M4 core, 72 MHz operating frequency, 256 KB Flash organized as 256K x 8, and a 100-UFBGA 7 x 7 mm package. Additional distributor descriptions identify dual watchdogs and numerous peripherals. The listed package is intended for compact PCB layouts, while the 256 KB Flash provides application-program storage for control code, configuration data, and firmware updates.
The STM32F372VCH6 is suitable for industrial automation, motor control, communications equipment, sensing systems, and consumer electronics. Its 72 MHz processing capability can support time-sensitive control loops, while the integrated MCU peripherals reduce the need for separate interface devices. Designers should confirm exact peripheral availability, electrical limits, pin assignments, and memory-map details from the STMicroelectronics STM32F373 family documentation before finalizing a new design.
A key engineering consideration is package and pin verification. This exact orderable MPN uses a 100-UFBGA package according to DigiKey and Mouser, so replacement must match the land pattern and pin functions rather than merely share the STM32F3 name. A similarly named STM32F3 device in another package may not be a drop-in substitute.
For firmware bring-up, use the documented STMicroelectronics programming and debug workflow, preserve the required reset and clock behavior, and validate the power supply and decoupling network against the manufacturer reference design. Use the family documentation as the source of truth for peripheral configuration and pin multiplexing.
This page combines verified distributor specifications, sourcing links, package information, and design-oriented selection guidance. It does not invent electrical details absent from the supplied web data; missing parameters are explicitly marked for verification.
드롭인 대체품: STM32F372VCH6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F372VCH6 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Flash Organization, Package, Supply Voltage.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32F373VCH6
✅ 드롭인✓ 재고 있음
$12.583 / 개
데이터시트 보기 →STM32F372VCH6 최대 정격 & 전기적 특성
| Core | ARM Cortex-M4 |
| Architecture | 32-bit |
| 최대 클록 주파수 | 72 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| Product Series | STM32F3 |
| Series Position | STM32F372 |
| 패키지 | 100-UFBGA |
| Package Dimensions | 7 x 7 mm |
| 핀 수 | 100 pins |
| 실장 유형 | Surface mount |
| 공급 전압 | 2.5 V / 3.3 V |
| Watchdog Count | Dual watchdogs |
| Peripheral Integration | Numerous peripherals |
| Manufacturer Documentation | STM32F373 documentation page |
STM32F372VCH6 7 x 7 mm 핀 구성 가이드
STM32F372VCH6(7 x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F372VCH6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F372VCH6 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Motor Control and Power Electronics, Connected Sensor Node, Communications Equipment, Consumer Electronics and Embedded Products, Test and Measurement Front End.
Industrial Automation Controller
The STM32F372VCH6 fits compact automation equipment where a 72 MHz ARM Cortex-M4 core must execute control logic while the 256 KB Flash stores application firmware and configuration data. Its 100-UFBGA 7 x 7 mm package can reduce board footprint compared with larger leaded packages, making the MCU useful in distributed controllers, sensor gateways, and equipment-control modules. The design should be validated against the exact required timer, communications, analog, and industrial-temperature specifications before schematic release. Verify decoupling, grounding, reset behavior, and exposed-package assembly details using the official STMicroelectronics documentation.
추천
Motor Control and Power Electronics
The 72 MHz Cortex-M4 processor in STM32F372VCH6 can provide the computational headroom expected in real-time embedded control systems, while 256 KB Flash provides room for control algorithms and configuration. It may suit compact motor-drive or actuator-control designs only after timer channels, PWM capability, encoder interfaces, ADC performance, fault handling, and operating-temperature limits are confirmed in the family documentation. Do not infer suitability from clock speed alone. Validate current sensing, power-stage isolation, watchdog behavior, and thermal performance during prototype testing.
추천
Connected Sensor Node
STM32F372VCH6 is a logical candidate for a compact sensor node that must acquire measurements, run local filtering, and communicate through a serial or industrial network interface. Its 256 KB Flash provides storage for embedded application code, while the 100-UFBGA package helps minimize PCB area in distributed sensing equipment. Because the supplied data does not identify the exact communication peripherals or ADC resources, the engineer must verify interface availability, electrical levels, timing, and low-power requirements in the manufacturer documentation. Select external transceivers and sensors only after those checks pass.
추천
Communications Equipment
The STM32F372VCH6 can serve as the control processor in compact communications equipment when the design needs a 72 MHz Cortex-M4 core and 256 KB Flash without requiring a large external processor. The MCU can coordinate protocol handling, configuration, status reporting, and supervisory logic. The exact UART, USB, CAN, or other interface availability is not included in the supplied distributor snippets, so no specific interface should be claimed without checking the official STM32F373 documentation. Board-level signal integrity, ESD protection, connector routing, and firmware timing should be reviewed with the final peripheral configuration.
추천
Consumer Electronics and Embedded Products
The STM32F372VCH6 can support compact consumer or embedded products that need a dedicated real-time controller instead of a general-purpose application processor. Its 72 MHz Cortex-M4 performance and 256 KB Flash are useful for user-interface control, actuator management, status logic, and firmware organization in a small 7 x 7 mm package. Confirm whether the required display, audio, storage, USB, and touch peripherals exist before committing to it. Mechanical placement, thermal exposure, EMC, and end-of-life sourcing requirements should also be considered for consumer-volume production.
추천
Test and Measurement Front End
The STM32F372VCH6 can be considered for a compact measurement front end when firmware must coordinate sensor acquisition, calibration, status indicators, and a communications link. The Cortex-M4 core provides real-time processing capability and the 256 KB Flash provides a defined application-code budget for basic control software. However, the supplied data does not verify analog resolution, sample rate, timer accuracy, reference accuracy, or operating-temperature range. Those parameters are decisive for instrumentation, so validate them in the official datasheet and reference design before using the MCU as the measurement front end.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F372VCH6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F373VCH6 |
|---|---|---|
| Package | 100-UFBGA | 100-UFBGA - same package family indicated; exact footprint comparison requires verification |
| Brand | STMicroelectronics | STMicroelectronics |
주요 차별점
- 72 MHz ARM Cortex-M4 processing (vs STM32F373VCH6)
- Compact 100-UFBGA implementation (vs STM32F373VCH6)
- Documented 256 KB Flash budget (vs STM32F373VCH6)
- Dual-watchdog support in distributor descriptions (vs STM32F373VCH6)
설계 노트
Use the official STMicroelectronics 100-UFBGA land pattern and assembly recommendations rather than generating a footprint from the package dimensions alone. Confirm ball numbering, pad and mask definitions, paste volume, reflow profile, and any exposed thermal or ground-pad requirements. Because the supplied data does not include a complete pin map, preserve the manufacturer footprint and validate it against the exact package drawing before fabrication.
Follow the STM32F373 family reference design for supply routing and decoupling. Place required bulk and high-frequency capacitors close to the appropriate power pins, keep supply and return paths short, and verify the 2.5 V / 3.3 V operating context against the complete device datasheet. Do not assume the distributor snippet defines all voltage limits, current requirements, or power-sequencing constraints.
Review every high-speed or communication signal for proper reference planes, controlled impedance where applicable, series termination, and protection before layout release. Keep sensitive analog or timing paths away from switching nodes and noisy power loops. The supplied data does not enumerate the MCU communication peripherals or their electrical characteristics, so pin selection and edge-rate calculations must use the official datasheet and peripheral documentation.
Do not substitute a similarly named STM32 device solely because it has a Cortex-M4 core or a related package. Verify the exact 100-UFBGA ball map, memory size, peripheral set, voltage limits, clock configuration, package markings, and software-device support. Also check whether the firmware uses device-specific register definitions, because a nominal package match does not guarantee register-level or peripheral-level compatibility.
규정 준수 정보
The supplied distributor and search data do not provide verified compliance declarations for STM32F372VCH6. Obtain current RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification information from STMicroelectronics or an authorized distributor before making a compliance claim.
