STMicroelectronics

STM32L031F6P7 - 32MHz Cortex-M0+ MCU | STMicroelectronics

부품 번호: STM32L031F6P7 ✓ 활성
20-pin TSSOP Package 32 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

STM32L031F6P7 개요

The STMicroelectronics STM32L031F6P7 is an ultra-low-power 32-bit microcontroller with a 32 MHz Arm Cortex-M0+ RISC core, 32 KB of Flash memory, and a 20-pin TSSOP package. It belongs to the STM32L031x4/6 access-line family, combining compact embedded processing with low-power operation for cost-sensitive control and monitoring systems.

An ultra-low-power microcontroller is an embedded semiconductor designed to execute firmware while minimizing energy consumption during active operation and low-power standby. The STM32L031x4/6 hierarchy combines an Arm Cortex-M0+ processor, embedded Flash memory, GPIO, communication peripherals, and low-power modes in a compact system-on-chip. It is intended for products where a conventional higher-performance microcontroller would add unnecessary cost, size, or energy use.

Key device characteristics include a 32-bit Arm Cortex-M0+ core operating at 32 MHz, 32 KB of Flash organized as 32K x 8, and a 20-pin TSSOP package. The STM32L031F6P7 is identified as an industrial-temperature device by its ordering information. Its 20-pin surface-mount package supports compact PCB layouts while exposing the GPIO and interface resources required for embedded control applications.

The MCU architecture is centered on the Arm Cortex-M0+ instruction set, which provides efficient 32-bit processing in an embedded environment. The STM32L031x4/6 family is positioned by STMicroelectronics as an access line of ultra-low-power microcontrollers, giving designers a practical combination of processing capability, embedded memory, and compact packaging. Firmware and peripheral configuration must be evaluated against the complete STM32L031F6 datasheet and reference manual for each board design.

Typical uses include low-power sensor nodes, compact industrial monitors, building-access controls, battery-powered instruments, and embedded control modules. The 32 MHz core is appropriate for protocol handling, digital control, status reporting, and moderate real-time tasks, while the low-power positioning supports duty-cycled products that spend substantial time between active operations.

PCB design should preserve a clean supply path, place decoupling capacitance close to the device, and assign every exposed pin according to the manufacturer pinout and alternate-function tables. Firmware development should use the STM32CubeMX and STM32CubeIDE ecosystems for peripheral initialization, clock setup, low-power configuration, and production programming.

This product page combines the manufacturer product information, exact-MPN catalog data, packaging details, engineering application guidance, and a restricted drop-in comparison. It also identifies where same-footprint alternatives require careful review of memory size, temperature grade, peripheral configuration, and firmware compatibility before redesign approval.

드롭인 대체품: STM32L031F6P7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: STM32L031F6P7 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core, Flash Memory, RoHS Status.

STMicroelectronics
Package: TSSOP-20 (P6)
Core: ARM Cortex-M0+
Flash Memory: 32 KB
비교 대상: STM32L031F6P7 →
STMicroelectronics
Package: 20-TSSOP (0.173 inch, 4.40 mm width)
Core: Arm Cortex-M0+ (32-bit RISC)
Flash Memory: 32 KB (32K x 8)
비교 대상: STM32L031F6P7 →

STM32L031F6P6

✅ 드롭인 ⚠️ 사양 미검증
STMicroelectronics
📦 20-pin TSSOP
ARM Cortex-M0+ · 32 MHz · 32 KB · 8 KB · 1.8 V to 3.6 V · 87 uA/MHz · 0.29 uA · 12-bit

가격 문의

데이터시트 보기 →

STM32L031F6P7 최대 정격 & 전기적 특성

Product Type 32-bit ultra-low-power microcontroller (MCU)
Processor Core Arm Cortex-M0+ 32-bit RISC core
Maximum CPU Frequency 32 MHz
Flash Memory Size 32 KB (32K x 8)
패키지 20-pin TSSOP
실장 유형 Surface mount
Temperature Grade Industrial
Core Architecture Arm Cortex-M0+
Word Size 32 bit
Program Memory Type Flash, 32 KB
Low-Power Modes Ultra-low-power operating modes

STM32L031F6P7 20-pin tssop 핀 구성 가이드

STM32L031F6P7(20-pin tssop 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

STM32L031F6P7의 20-pin tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: STM32L031F6P7.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

STM32L031F6P7 적합 용도: 6 애플리케이션s: Low-Power Sensor Nodes, Industrial Status Monitors, Access-Control Keypads, Battery-Powered Measurement Instruments, Connected Control Modules, Building Automation Endpoints.

🧩

Low-Power Sensor Nodes

The STM32L031F6P7 fits compact battery-operated sensor nodes because its 32 MHz Arm Cortex-M0+ core can acquire data, apply filtering, and manage communications while the 32 KB of Flash holds application firmware. The 20-pin TSSOP package reduces board area in space-constrained assemblies. A duty-cycled design can remain active only during sampling and radio activity, then enter a low-power state between measurements. Firmware should verify sensor settling time, wake-up behavior, and clock accuracy, while the hardware design should provide local decoupling and a stable low-power supply.

🏭

Industrial Status Monitors

The STM32L031F6P7 is appropriate for industrial status-monitor products that collect operating conditions and report them through a serial or bus interface. Its 32-bit Cortex-M0+ processor provides enough performance for protocol handling, debouncing, event logging, and supervisory logic, while the industrial ordering grade supports designs intended for extended operating conditions. The 20-pin TSSOP package accepts GPIO, communication, and power connections in a compact assembly. Firmware should include watchdog, reset-cause, and fault-reporting behavior, and the PCB should isolate external connectors from sensitive signal routing.

🔒

Access-Control Keypads

The STM32L031F6P7 supports compact access-control keypads by combining a 32 MHz Cortex-M0+ core, 32 KB of Flash, and a small 20-pin TSSOP footprint. It can scan switches, evaluate credentials, manage indicator outputs, and maintain a controlled low-power duty cycle. The microcontroller architecture permits protocol handling without an external processor, reducing board area and component count. Design the keypad matrix to limit long exposed traces, provide ESD protection at connector-facing inputs, and verify debounce timing in firmware. Current consumption and wake-up latency should be checked against the complete product operating profile.

⚡

Battery-Powered Measurement Instruments

The STM32L031F6P7 can serve as the control core of a compact battery-powered measurement instrument where the 32 MHz Cortex-M0+ processor handles sampling coordination, scaling, local display updates, and data logging. Its 32 KB of Flash provides dedicated space for firmware, while the ultra-low-power product positioning supports reduced consumption between measurements. The TSSOP-20 package minimizes the controller footprint without requiring a fine-pitch BGA assembly. Power-system design should separate noisy actuator or radio loads from sensitive measurement paths, and the firmware should use the specified low-power modes only after confirming required settling and acquisition times.

🌐

Connected Control Modules

The STM32L031F6P7 is well suited to connected control modules that translate sensor and switch information into standardized serial messages. Its 32-bit Cortex-M0+ core can support protocol framing, command parsing, state-machine control, and diagnostics, while 32 KB of Flash accommodates a focused embedded application. The 20-pin TSSOP footprint supports compact modules and straightforward surface-mount assembly. Interface implementation should account for electrical levels, connector protection, and bus idle states. A communication transceiver should be placed near its connector, while the MCU and decoupling network should remain on a quiet supply reference to reduce digital noise coupling into analog measurements.

🏠

Building Automation Endpoints

The STM32L031F6P7 fits building-automation endpoints that supervise lighting inputs, occupancy interfaces, or environmental sensor connections. Its 32 MHz Cortex-M0+ core can execute control logic, debounce digital inputs, update outputs, and handle remote configuration over a serial link. The industrial ordering grade and compact 20-pin TSSOP package support space-conscious equipment designs. Firmware should define safe output states during reset and communication loss, while the PCB should use appropriate separation between mains-adjacent interfaces and low-level logic. Low-power behavior must be coordinated with the building system so periodic reporting and local control actions remain deterministic.

What is the STM32L031F6P7?
The STM32L031F6P7 is an ultra-low-power, 32-bit STMicroelectronics microcontroller built around a 32 MHz Arm Cortex-M0+ core with 32 KB of Flash in a 20-pin TSSOP package. According to the STMicroelectronics manufacturer page, it belongs to the STM32L031x4/6 access-line family. It is suited to compact embedded controllers, sensor nodes, industrial monitors, and low-power products requiring efficient control processing in a small footprint.
What are the key specifications of STM32L031F6P7 that engineers should know?
The STM32L031F6P7 combines a 32-bit Arm Cortex-M0+ processor, 32 MHz operating frequency, 32 KB of Flash memory, and a 20-pin TSSOP package. STMicroelectronics identifies the device as an industrial-temperature ultra-low-power MCU in the STM32L031x4/6 family. The 32K x 8 Flash organization and low-power product positioning make the device suitable for compact monitoring, control, connectivity, and embedded automation products.
What is the operating voltage range of STM32L031F6P7?
The operating-voltage limits for the STM32L031F6P7 must be taken from the STM32L031F6 datasheet because the manufacturer product page used for this listing confirms the 32 MHz Cortex-M0+ MCU but does not state the voltage limits. Use the datasheet supply-voltage table when designing the regulator, decoupling network, and power-sequencing scheme. Do not infer the range from the 1.65 V to 3.6 V operating region of related STM32L0 devices.
Where can I download the STM32L031F6P7 datasheet PDF?
The official STM32L031F6P7 datasheet and supporting documentation are available through the STMicroelectronics STM32L031F6 product page linked on this page. The page identifies the STM32L031x4/6 family, its 32 MHz Arm Cortex-M0+ core, and the STM32L031F6 variants. Use the manufacturer documentation for the complete pin-description table, electrical characteristics, memory map, package drawing, and errata requirements.
Where can I find the STM32L031F6P7 pinout?
The STM32L031F6P7 pinout is defined in the pin-description section of the STMicroelectronics STM32L031F6 datasheet. The exact 20-pin TSSOP assignments should be taken from that table rather than inferred from a generic STM32L0 diagram. Check alternate-function selections, debug pins, oscillator pins, power pins, and ground connections before assigning PCB tracks or programming test points.
Can STM32L031F6P7 be used for low-power sensor nodes?
Yes, the STM32L031F6P7 is suitable for low-power sensor nodes because it is an ultra-low-power 32 MHz Cortex-M0+ MCU with 32 KB of Flash. Its compact TSSOP-20 package also suits space-constrained sensor assemblies. For battery-powered designs, duty-cycle the firmware between active measurement periods and the device's specified low-power states, while checking wake-up time and peripheral settling behavior against the measurement schedule.
Is STM32L031F6P7 suitable for industrial control applications?
The STM32L031F6P7 is identified as an industrial-temperature 32-bit MCU, making it appropriate for many industrial control, monitoring, and embedded automation products. Its 32 MHz Cortex-M0+ core and 32 KB of Flash support protocol handling, digital logic, status reporting, and moderate control tasks. Confirm pin multiplexing, available interfaces, memory requirements, and environmental limits in the manufacturer documentation before release.
Where to buy STM32L031F6P7 online?
Use the Request a Quote form on this page to request STM32L031F6P7 pricing, stock confirmation, and order handling for the exact 20-pin TSSOP ordering code. The manufacturer product page and exact-MPN catalog listing are also linked in the product-data section for technical confirmation. Share your required quantity, date code preference, and target delivery location with the quote request so sourcing can respond with the appropriate configuration.
What is the price of STM32L031F6P7?
Submit a Request a Quote through the form on this page for the current STM32L031F6P7 unit price and volume structure. Pricing can vary with order quantity, date code, packaging configuration, market conditions, and requested delivery terms. The quote form is the appropriate route because the page does not present a static price table that could become outdated or conflict with the selected order configuration.
What is the lead time for STM32L031F6P7?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on available manufacturer inventory, the requested quantity, date-code requirements, and logistics conditions. For production planning, include your required delivery date and approved alternatives list so sourcing can distinguish normal replenishment from schedule-constrained procurement.
Is STM32L031F6P7 in stock?
Stock status for STM32L031F6P7 should be confirmed through the Request a Quote form on this page. Include the required quantity, packaging preference, date-code requirement, and target delivery date. This approach produces a current confirmation for the exact MPN rather than relying on a generic catalog-stock indicator that may not reflect the requested order configuration.
STM32L031F6P7 vs STM32L031F6P6 - which is better for industrial designs?
The STM32L031F6P6 is the closest same-footprint alternative listed, while the STM32L031F6P7 carries the industrial ordering grade. Both use the 20-pin TSSOP format and the STM32L031x4/6 architecture with a 32 MHz Cortex-M0+ core and 32 KB of Flash. The STM32L031F6P7 is the appropriate choice when the industrial temperature grade is required; review the manufacturer ordering table before substituting the P6 version.
What is the difference between STM32L031F6P7 and STM32L031F6P6?
The primary ordering difference between STM32L031F6P7 and STM32L031F6P6 is the device temperature grade: the STM32L031F6P7 is identified as industrial, while the P6 ordering code represents a different grade. Both remain members of the STM32L031x4/6 family with a 32 MHz Cortex-M0+ core and 32 KB of Flash. Confirm the exact limits and qualification status against the STMicroelectronics ordering information.
When should I choose STM32L031F6P7 over STM32L031F6P6?
Choose the STM32L031F6P7 when the product specification calls for the industrial ordering grade and the operating environment requires that temperature range. Retain the STM32L031F6P6 only when its temperature grade, qualification, and ordering details satisfy the complete product requirements. Because the package, memory size, and core are retained, the decision should be based on environmental rating and procurement requirements rather than PCB footprint.
What can replace STM32L031F6P7?
The STM32L031F6P6 is the only verified same-package substitute presented for the STM32L031F6P7, and it is suitable only when the P6 temperature grade meets the product requirements. No verified cross-brand drop-in replacement is identified for this exact 20-pin TSSOP device. A cross-brand MCU with the same pin count should not be treated as interchangeable because peripheral mapping, power behavior, bootloader support, and firmware assumptions may differ.
Is STM32L031F6P6 the same as STM32L031F6P7?
No. The STM32L031F6P6 and STM32L031F6P7 share the STM32L031F6 family basis, 20-pin TSSOP package, 32 MHz Cortex-M0+ architecture, and 32 KB of Flash configuration, but their ordering grades differ. The STM32L031F6P7 is identified as industrial, so it is the preferred selection when that grade is required. The P6 version should be approved only after confirming its temperature range and qualification against the system specification.

엔지니어링 참조 데이터: STM32L031F6P7 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the STM32L031F6P7 for compact embedded products that require an industrial-grade ultra-low-power MCU, a 32 MHz Cortex-M0+ core, and 32 KB of Flash in a 20-pin TSSOP package. It is particularly suitable for duty-cycled sensor nodes, industrial monitors, access-control equipment, and compact measurement products. The STM32L031F6P6 is the closest same-footprint alternative when its different ordering-temperature grade satisfies the environmental requirements. No verified cross-brand drop-in replacement is presented because pin count alone is insufficient to establish peripheral, electrical, bootloader, and firmware compatibility. For any proposed substitute, review the manufacturer pin table, memory configuration, low-power characteristics, peripheral map, programming method, and qualification status before approving a redesign.

대체품과의 비교

파라미터 이 제품 STM32L031F6P6
Package 20-pin TSSOP 20-pin TSSOP
Brand STMicroelectronics STMicroelectronics
Processor Core Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 32 KB (32K x 8) 32 KB (32K x 8)
Word Size 32 bit 32 bit
Temperature Grade Industrial Different ordering grade; consult the manufacturer ordering table
Product Positioning Access line ultra-low-power MCU Access line ultra-low-power MCU

주요 차별점

  • Industrial ordering grade (vs STM32L031F6P6)
  • Direct same-family PCB compatibility (vs STM32L031F6P6)
  • Matched processing and memory configuration (vs STM32L031F6P6)

설계 노트

Design the supply network around the voltage range, current limit, and decoupling requirements stated in the STM32L031F6 datasheet. Place the highest-frequency decoupling capacitor directly between the MCU supply and ground pins, then add bulk capacitance near the regulator. Keep switching loads, communications transceivers, and actuator drivers on separately filtered branches so their current transients do not disturb the MCU supply or measurement inputs.

Assign all 20 pins from the manufacturer pin-description table before schematic capture and PCB routing. Confirm oscillator, reset, debug, boot, power, and ground assignments for the selected board configuration. Use a common, low-impedance ground plane, minimize loop area beneath the TSSOP, avoid routing fast or noisy signals adjacent to sensitive inputs, and provide accessible test pads for programming and production inspection.

Do not substitute an STM32L031F6P6 without reviewing the temperature-grade and qualification differences. A shared TSSOP footprint does not establish full electrical equivalence by itself. Also verify the exact ordering suffix, pin multiplexing, clock configuration, low-power mode, watchdog behavior, and peripheral mapping. Re-run firmware validation whenever the alternative's grade, silicon revision, or ordering interpretation changes.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The exact-MPN catalog information identifies the STM32L031F6P7 as an industrial STM32L031x4/6 microcontroller but does not state component-level environmental or substance-compliance declarations.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

STM32L031F6P7 datasheet STM32L031F6P7 pinout STM32L031F6P7 datasheet pdf STM32L031F6P7 20-TSSOP STM32L031F6P7 32MHz Cortex-M0+ STM32L031F6P7 32KB Flash STM32L031F6P7 replacement STM32L031F6P7 equivalent STM32L031F6P7 vs STM32L031F6P6 STM32L031F6P7 price STM32L031F6P7 stock STM32L031F6P7 low power MCU STM32L031F6P7 industrial application STMicroelectronics STM32L031F6P7 STM32L031F6P7 programming

관련 부품 & 용어

STMicroelectronics STM32L031F6P7 STM32L031F6 STM32L031F6P6 STM32L031x4/6 Arm Cortex-M0+ Arm Cortex-M0+ processor 32-bit RISC core ultra-low-power microcontroller embedded microcontroller microcontroller semiconductor Flash memory 32K x 8 Flash organization 20-pin TSSOP TSSOP package family surface-mount package industrial temperature grade low-power sensor node industrial status monitoring access control building automation battery-powered instrumentation GPIO serial communication STM32CubeMX STM32CubeIDE
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기