STM32L452RET3 - 80MHz Cortex-M4 MCU | STMicroelectronics
부품 번호: STM32L452RET3 ✓ 활성STM32L452RET3 개요
An ultra-low-power microcontroller is a compact embedded processing platform optimized to complete useful work while minimizing energy consumption. The STM32L4 series combines the Arm Cortex-M4 processor class with energy-conscious peripherals, allowing designers to balance performance, response time, and battery life. STM32L452RET3 belongs to this MCU hierarchy: microcontroller, 32-bit RISC processor, Arm Cortex-M4 core, and embedded system controller.
Principal features include a 32-bit Cortex-M4 core, an 80 MHz maximum operating frequency, 512 KB of program Flash, and 160 KB of SRAM. The Cortex-M4 architecture includes floating-point hardware suited to control algorithms, signal processing, and real-time calculations. Analog, audio, and external-SMPS support broaden the device's usefulness for mixed-signal products where a separate processing companion might otherwise be required.
The STM32L452xx family is designed for applications that need substantial processing capability without the power envelope of a high-performance system-on-chip. Its 100 DMIPS figure provides a useful indication of instruction throughput, while the 512 KB Flash capacity provides room for application code, firmware, and configuration data. The 160 KB SRAM supports working memory, buffers, protocol stacks, and real-time data processing without requiring external memory in many designs.
Typical uses include industrial control equipment, low-power sensor nodes, building automation modules, medical monitoring systems, connected industrial products, and compact audio-processing platforms. The device is particularly suitable when firmware requires a 32-bit processor and an FPU but the end product must operate from constrained power budgets. Its 64-LQFP package also exposes a conventional pin count for assembly and inspection.
A successful design begins by allocating pins for power, ground, clocking, debug, communication, and analog functions in the STM32L452xx datasheet pin description. Review the selected board’s voltage, clock, decoupling, and exposed-programming requirements before finalizing firmware support. Because peripheral availability and electrical limits can vary by order code, use the exact STM32L452RET3 pin and electrical tables when assigning tracks.
This product page combines manufacturer specifications, package details, sourcing information, qualified same-footprint alternatives, and practical replacement guidance. It is intended to accelerate component selection while keeping the final engineering decision grounded in the official STM32L452xx documentation.
드롭인 대체품: STM32L452RET3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32L452RET3 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, ADC, Architecture, Core.
STM32L452RET6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L462RET6TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L452REI3
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L462REI6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L431RBI3
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L443RCI6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L452RET3 최대 정격 & 전기적 특성
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Maximum Performance | 100 DMIPS |
| Flash Memory | 512 KB |
| SRAM | 160 KB |
| Program Memory Organization | 512K x 8 bits |
| 공급 전압 | 2.5 V / 3.3 V |
| 패키지 | 64-pin LQFP |
| Package Body Size | 10 mm x 10 mm |
| 실장 유형 | Surface mount |
| Integrated Functions | Analog, audio, and external SMPS support |
STM32L452RET3 10 mm x 10 mm 핀 구성 가이드
STM32L452RET3(10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32L452RET3.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32L452RET3 적합 용도: 6 애플리케이션s: Industrial Sensor Nodes, Building Automation Controllers, Medical Monitoring Equipment, Connected Industrial Gateways, Audio and Voice Processing, External-SMPS-Assisted Power Systems.
Industrial Sensor Nodes
The STM32L452RET3 fits compact sensor nodes that periodically measure physical inputs, filter results, and communicate through a low-power serial interface. Its 80 MHz Cortex-M4 core and 160 KB of SRAM provide enough working memory for local buffers and protocol processing without requiring external memory in many designs. The 512 KB of Flash holds application firmware, calibration data, and update logic. Using the device in a duty-cycled operating strategy can reduce energy consumption between measurement events, while the 64-pin LQFP package simplifies assembly for industrial controller boards.
추천
Building Automation Controllers
The STM32L452RET3 can serve as the central controller for a building-automation module that coordinates lighting, climate, access, and occupancy functions. Its 80 MHz processing rate supports event handling and multiple communication tasks, while the FPU assists with filtering and control calculations. The 512 KB Flash capacity accommodates protocol stacks and application logic, and 160 KB of SRAM supports message buffers and state management. Low-power modes are valuable in permanently installed equipment, although the final power budget and communication duty cycle must be verified in the system implementation.
추천
Medical Monitoring Equipment
The STM32L452RET3 is suitable for low-power medical-monitoring electronics that acquire sensor signals, apply filtering, and present processed measurements through a local or connected interface. Its Cortex-M4 FPU supports numerical operations used in signal conditioning, while 160 KB of SRAM can hold sample buffers and working state. The 512 KB of Flash provides room for control firmware and algorithms. For connected equipment, low-power operation helps constrain energy use, but medical-system requirements, operating-temperature limits, and regulatory validation must be assessed independently for the finished product.
추천
Connected Industrial Gateways
The STM32L452RET3 supports compact industrial gateways that translate between local sensors and an upstream network. At 80 MHz, the Cortex-M4 core can process protocol frames, maintain communication state, and execute application logic concurrently, while the floating-point unit accelerates numeric operations. Its 512 KB Flash and 160 KB SRAM are suitable for embedded protocol stacks and buffering without demanding a high-end application processor. The 64-pin LQFP exposes the required communication, debug, clock, and power pins and remains practical for conventional surface-mount assembly.
추천
Audio and Voice Processing
The STM32L452RET3 can be used in audio and voice-processing modules that require real-time computation within a constrained power envelope. Its 80 MHz Cortex-M4 core with an FPU is well suited to digital filtering, signal transformation, and control of an audio interface. The STM32L452xx family also includes audio-related functionality, while 512 KB of Flash and 160 KB of SRAM accommodate firmware and working buffers. Actual channel count, sampling rate, codec choice, and clocking must be checked against the exact peripheral configuration in the manufacturer documentation.
추천
External-SMPS-Assisted Power Systems
The STM32L452RET3 is appropriate for low-power systems that need an MCU alongside an external switched-mode power supply. The STM32L452xx family's external-SMPS support can coordinate the MCU with a dedicated supply topology, allowing system designers to separate processor performance from rail generation. The 80 MHz core remains available for control and monitoring tasks, and 512 KB of Flash supports supervisory firmware. The external-SMPS implementation still depends on the required rail voltage, startup sequence, feedback network, and component choices documented for the device.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32L452RET3 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32L452RET6 | STM32L462RET6TR | STM32L452REI3 | STM32L462REI6 | STM32L431RBI3 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 | Arm Cortex-M4 with FPU | Arm Cortex-M4 | Arm Cortex-M4 |
| Series | STM32L452 | STM32L452 | STM32L462 | STM32L452 | STM32L462 | STM32L431 |
주요 차별점
- Exact STM32L452 family configuration (vs STM32L462RET6TR)
- Closest same-family drop-in path (vs STM32L452RET6)
- Substantial SRAM for embedded buffering (vs STM32L431RBI3)
- FPU-enabled 80 MHz processing (vs STM32L431RBI3)
설계 노트
Assign every signal from the exact STM32L452RET3 pin-description table before final routing. The 64-LQFP footprint includes power, ground, clock, reset, boot, debug, and peripheral pins, and adjacent pins may serve multiple functions. Preserve the package orientation shown in the manufacturer drawing and verify that exposed programming or debug access remains reachable after assembly.
Plan the 2.5 V or 3.3 V supply path with decoupling and regulator headroom appropriate to the selected operating mode. The low-power architecture does not eliminate startup, analog, clock, and peripheral current, so calculate the worst-case rail load before fixing external component ratings. Use the exact electrical-characteristics tables to determine decoupling capacitance, allowable source impedance, and brownout behavior.
Do not treat another STM32L4 order code as interchangeable solely because it uses a 64-pin LQFP package. Check the STM32L452RET3 pin table against the alternative for used analog channels, timer channels, communication mappings, debug pins, clock sources, and external-SMPS functions. Firmware startup code and peripheral clocks may also need adjustment when moving between STM32L452, STM32L462, STM32L431, or STM32L443 devices.
Estimate power loss from the actual rail voltage, core load, clock configuration, and enabled peripherals rather than using the CPU frequency alone. If the design adds a switched supply, include that converter's efficiency and thermal stress in the system budget. Keep the LQFP solder joints within assembly requirements and use the manufacturer's package and maximum-rating information to set the board's ambient-temperature envelope.
규정 준수 정보
Compliance attributes were not stated for the exact order code, so each remains unknown. Confirm the order-code qualification and environmental specifications in STMicroelectronics documentation before production release.