STMicroelectronics

STM32L452RET3 - 80MHz Cortex-M4 MCU | STMicroelectronics

N.º da peça: STM32L452RET3 ✓ Ativo
2.5 V / 3.3 V Vdss 64-pin LQFP Package 80 MHz Speed 512 KB Memory
MOQ: 1 |

STM32L452RET3 Visão geral

The STMicroelectronics STM32L452RET3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an FPU, operating at up to 80 MHz and delivering up to 100 DMIPS. It provides 512 KB of Flash memory, 160 KB of SRAM, and a 64-pin LQFP package measuring 10 mm by 10 mm. The device also integrates analog and audio resources with support for an external switched-mode power supply.

An ultra-low-power microcontroller is a compact embedded processing platform optimized to complete useful work while minimizing energy consumption. The STM32L4 series combines the Arm Cortex-M4 processor class with energy-conscious peripherals, allowing designers to balance performance, response time, and battery life. STM32L452RET3 belongs to this MCU hierarchy: microcontroller, 32-bit RISC processor, Arm Cortex-M4 core, and embedded system controller.

Principal features include a 32-bit Cortex-M4 core, an 80 MHz maximum operating frequency, 512 KB of program Flash, and 160 KB of SRAM. The Cortex-M4 architecture includes floating-point hardware suited to control algorithms, signal processing, and real-time calculations. Analog, audio, and external-SMPS support broaden the device's usefulness for mixed-signal products where a separate processing companion might otherwise be required.

The STM32L452xx family is designed for applications that need substantial processing capability without the power envelope of a high-performance system-on-chip. Its 100 DMIPS figure provides a useful indication of instruction throughput, while the 512 KB Flash capacity provides room for application code, firmware, and configuration data. The 160 KB SRAM supports working memory, buffers, protocol stacks, and real-time data processing without requiring external memory in many designs.

Typical uses include industrial control equipment, low-power sensor nodes, building automation modules, medical monitoring systems, connected industrial products, and compact audio-processing platforms. The device is particularly suitable when firmware requires a 32-bit processor and an FPU but the end product must operate from constrained power budgets. Its 64-LQFP package also exposes a conventional pin count for assembly and inspection.

A successful design begins by allocating pins for power, ground, clocking, debug, communication, and analog functions in the STM32L452xx datasheet pin description. Review the selected board’s voltage, clock, decoupling, and exposed-programming requirements before finalizing firmware support. Because peripheral availability and electrical limits can vary by order code, use the exact STM32L452RET3 pin and electrical tables when assigning tracks.

This product page combines manufacturer specifications, package details, sourcing information, qualified same-footprint alternatives, and practical replacement guidance. It is intended to accelerate component selection while keeping the final engineering decision grounded in the official STM32L452xx documentation.

Alternativas drop-in para STM32L452RET3 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32L452RET3 (mesmo formato e footprint) — diferindo em Package, Flash Memory, ADC, Architecture, Core.

STMicroelectronics
Package: 64-UFBGA (5 x 5 mm)
Flash Memory: 256 KB (256K x 8)
Architecture: 32-bit
Comparar com STM32L452RET3 →
STMicroelectronics
Package: LQFP-64 (10x10 mm)
ADC: 12-bit, with hardware oversampling
Core: Arm Cortex-M4 with FPU
Comparar com STM32L452RET3 →
STMicroelectronics
Package: LQFP-64 (10x10 mm)
ADC: 2x 12-bit ADC with hardware oversampling
Core: Arm Cortex-M4 with FPU, 32-bit RISC
Comparar com STM32L452RET3 →

STM32L452RET6

✅ Drop-In
STMicroelectronics
📦 64-LQFP (10x10 mm)
Arm Cortex-M4 with FPU · 80 MHz · 100 DMIPS / 273 CoreMark · 512 KB · 160 KB · 1.71 V to 3.6 V · -40 C to +85 C · 22 nA (5 wakeup pins)

Consulte o preço

Ver ficha técnica →

STM32L462RET6TR

✅ Drop-In
📦 64-LQFP (10x10 mm)
Matches the 80 MHz operating frequency and 512 KB Flash configuration, giving 0 MHz and 0 KB differences in those headline ratings; the STM32L462 peripheral set differs.

📋 Alternativa de referência (fora do catálogo)

STM32L452REI3

✅ Drop-In
📦 64-LQFP (10x10 mm)
Same STM32L452 family, 80 MHz class, and 64-pin footprint, with 0 MHz frequency difference; the order-code temperature and delivery qualification differ.

📋 Alternativa de referência (fora do catálogo)

STM32L462REI6

✅ Drop-In
📦 64-LQFP (10x10 mm)
Provides the same 64-pin LQFP footprint and 80 MHz-class Cortex-M4 architecture, with 0 MHz core-rate difference; STM32L462 peripherals and order-code qualification require review.

📋 Alternativa de referência (fora do catálogo)

STM32L431RBI3

✅ Drop-In
📦 64-LQFP (10x10 mm)
Matches the 80 MHz core class and 64-pin LQFP footprint, giving a 0 MHz frequency difference; Flash and SRAM capacities and peripheral assignments differ from STM32L452RET3.

📋 Alternativa de referência (fora do catálogo)

STM32L443RCI6

✅ Drop-In
STMicroelectronics
📦 64-LQFP (10x10 mm)
32-bit ultra-low-power Arm Cortex-M4 MCU with FPU · Arm Cortex-M4 · 80 MHz · 256 KB (256K x 8) · 64 KB · 32-bit · Yes · 64-UFBGA (5 x 5 mm)

Consulte o preço

Ver ficha técnica →

STM32L452RET3 Classificações máximas e características elétricas

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4 with FPU
Architecture 32-bit RISC
Maximum CPU Frequency 80 MHz
Maximum Performance 100 DMIPS
Flash Memory 512 KB
SRAM 160 KB
Program Memory Organization 512K x 8 bits
Tensão de alimentação 2.5 V / 3.3 V
Encapsulamento 64-pin LQFP
Package Body Size 10 mm x 10 mm
Tipo de montagem Surface mount
Integrated Functions Analog, audio, and external SMPS support

Guia de Configuração de Pinos do STM32L452RET3 10 mm x 10 mm

Configuração de pinos para STM32L452RET3 (pacote 10 mm x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 10 mm x 10 mm para STM32L452RET3

Nenhum dado detalhado de pinagem disponível para STM32L452RET3.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32L452RET3 é adequado para 6 aplicaçãos: Industrial Sensor Nodes, Building Automation Controllers, Medical Monitoring Equipment, Connected Industrial Gateways, Audio and Voice Processing, External-SMPS-Assisted Power Systems.

🏭

Industrial Sensor Nodes

The STM32L452RET3 fits compact sensor nodes that periodically measure physical inputs, filter results, and communicate through a low-power serial interface. Its 80 MHz Cortex-M4 core and 160 KB of SRAM provide enough working memory for local buffers and protocol processing without requiring external memory in many designs. The 512 KB of Flash holds application firmware, calibration data, and update logic. Using the device in a duty-cycled operating strategy can reduce energy consumption between measurement events, while the 64-pin LQFP package simplifies assembly for industrial controller boards.

🧩

Building Automation Controllers

The STM32L452RET3 can serve as the central controller for a building-automation module that coordinates lighting, climate, access, and occupancy functions. Its 80 MHz processing rate supports event handling and multiple communication tasks, while the FPU assists with filtering and control calculations. The 512 KB Flash capacity accommodates protocol stacks and application logic, and 160 KB of SRAM supports message buffers and state management. Low-power modes are valuable in permanently installed equipment, although the final power budget and communication duty cycle must be verified in the system implementation.

💊

Medical Monitoring Equipment

The STM32L452RET3 is suitable for low-power medical-monitoring electronics that acquire sensor signals, apply filtering, and present processed measurements through a local or connected interface. Its Cortex-M4 FPU supports numerical operations used in signal conditioning, while 160 KB of SRAM can hold sample buffers and working state. The 512 KB of Flash provides room for control firmware and algorithms. For connected equipment, low-power operation helps constrain energy use, but medical-system requirements, operating-temperature limits, and regulatory validation must be assessed independently for the finished product.

🌐

Connected Industrial Gateways

The STM32L452RET3 supports compact industrial gateways that translate between local sensors and an upstream network. At 80 MHz, the Cortex-M4 core can process protocol frames, maintain communication state, and execute application logic concurrently, while the floating-point unit accelerates numeric operations. Its 512 KB Flash and 160 KB SRAM are suitable for embedded protocol stacks and buffering without demanding a high-end application processor. The 64-pin LQFP exposes the required communication, debug, clock, and power pins and remains practical for conventional surface-mount assembly.

🎧

Audio and Voice Processing

The STM32L452RET3 can be used in audio and voice-processing modules that require real-time computation within a constrained power envelope. Its 80 MHz Cortex-M4 core with an FPU is well suited to digital filtering, signal transformation, and control of an audio interface. The STM32L452xx family also includes audio-related functionality, while 512 KB of Flash and 160 KB of SRAM accommodate firmware and working buffers. Actual channel count, sampling rate, codec choice, and clocking must be checked against the exact peripheral configuration in the manufacturer documentation.

⚡

External-SMPS-Assisted Power Systems

The STM32L452RET3 is appropriate for low-power systems that need an MCU alongside an external switched-mode power supply. The STM32L452xx family's external-SMPS support can coordinate the MCU with a dedicated supply topology, allowing system designers to separate processor performance from rail generation. The 80 MHz core remains available for control and monitoring tasks, and 512 KB of Flash supports supervisory firmware. The external-SMPS implementation still depends on the required rail voltage, startup sequence, feedback network, and component choices documented for the device.

Resumo dos produtos recomendados

STM32L452RET6 STMicroelectronics Usado em: Industrial Sensor Nodes, Building Automation Controllers, Medical Monitoring Equipment, Connected Industrial Gateways, Audio and Voice Processing, External-SMPS-Assisted Power Systems STM32L452REI3 Related STM32L452 order-code alternative Usado em: Industrial Sensor Nodes, External-SMPS-Assisted Power Systems STM32L462RET6TR Related Cortex-M4 controller candidate Usado em: Building Automation Controllers, Medical Monitoring Equipment, Connected Industrial Gateways, Audio and Voice Processing
What is the STM32L452RET3?
The STM32L452RET3 is a 32-bit ultra-low-power Arm Cortex-M4 microcontroller from STMicroelectronics, operating at up to 80 MHz with an FPU. It includes 512 KB of Flash, 160 KB of SRAM, and a 64-pin LQFP package measuring 10 mm by 10 mm. According to the STMicroelectronics STM32L452xx datasheet, the device is designed for low-power embedded processing with analog, audio, and external-SMPS support.
What are the key specifications of STM32L452RET3 that engineers should know?
The STM32L452RET3 combines an 80 MHz 32-bit Arm Cortex-M4 core, an FPU, 512 KB of Flash, 160 KB of SRAM, and up to 100 DMIPS in a 64-pin LQFP package. According to the STMicroelectronics STM32L452xx datasheet, the MCU is intended for ultra-low-power designs and includes analog, audio, and external switched-mode power-supply functions. These parameters make it suitable for real-time control, connected sensor equipment, and compact industrial products.
Where can I download the STM32L452RET3 datasheet PDF?
The official STM32L452RET3 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32l452re.pdf. The document covers the STM32L452xx family rather than only the RET3 order code, so engineers should use its exact STM32L452RET3 ordering-information and pin-description sections when assigning the 64 LQFP pins. It is the primary reference for electrical limits, clocking, peripherals, and package details.
Where can I find the STM32L452RET3 pinout?
The STM32L452RET3 pinout is found in the pin-description section of the official STM32L452xx datasheet at https://www.st.com/resource/en/datasheet/stm32l452re.pdf. The device uses a 64-pin LQFP package, so every package lead must be assigned from the exact STM32L452RET3 pin table. Use the datasheet numbering rather than an image from a generic STM32L4 board when creating the PCB footprint or checking reserved leads.
How much power does the STM32L452RET3 require?
The STM32L452RET3 is designed for low-power operation, but its exact supply consumption depends on clock frequency, active peripherals, operating mode, and temperature. The official STM32L452xx datasheet provides the relevant current and power characteristics. It identifies a 2.5 V or 3.3 V operating supply for this order code, so power budgeting should include regulator headroom, startup current, and the load imposed by enabled analog and communication peripherals.
What is the STM32L452RET3 voltage range?
The STM32L452RET3 is identified as a 2.5 V or 3.3 V microcontroller in distributor and manufacturer information for this order code. According to the STMicroelectronics STM32L452xx datasheet, the device includes operating characteristics for its supported supply range. The associated comparison information for the STM32L462 family identifies a 1.71 V to 3.6 V range, but engineers should use the exact STM32L452RET3 table before selecting regulator tolerances or external component ratings.
STM32L452RET3 vs STM32L462RET6TR - which is better for low-power control?
The STM32L452RET3 is the stronger choice when the design specifically targets the STM32L452 feature set, including 512 KB of Flash, 160 KB of SRAM, and the L452 analog and low-power configuration. The STM32L462RET6TR is also listed as a 64-pin LQFP, 512 KB Flash Cortex-M4 MCU operating at 80 MHz, but it belongs to a different STM32L4 subfamily. Compare peripheral availability, clock tree, power modes, and software-support requirements before selecting a direct substitute.
What is the difference between STM32L452RET3 and STM32L452RET6?
The STM32L452RET3 and STM32L452RET6 are both listed as drop-in alternatives within the STM32L452 family, and both use the same 64-pin LQFP footprint. Their headline processor and memory figures align at 80 MHz, 512 KB of Flash, and 160 KB of SRAM for the family. The order-code and temperature-grade suffixes should be checked against the manufacturer ordering table because those codes determine the exact qualification and delivery configuration.
When should I choose STM32L452RET3 over STM32L452RET6?
Choose the STM32L452RET3 when its exact order code matches the PCB assembly, temperature grade, and delivery requirements of the design. Choose the STM32L452RET6 only after confirming that its corresponding suffix and package meet those requirements. Both devices offer the same 64-LQFP STM32L452 family foundation at 80 MHz with 512 KB of Flash, but a shared footprint alone does not replace an ordering-table and operating-temperature review.
Is STM32L452RET3 suitable for industrial control and sensor applications?
Yes, the STM32L452RET3 is suitable for many industrial-control and sensor applications because it combines an 80 MHz Cortex-M4 core, 160 KB of SRAM, and an FPU within an ultra-low-power MCU family. Its 512 KB of Flash also provides room for control logic, communications, and data processing. Industrial qualification and the final temperature grade must be confirmed from the exact order-code information before use in high-temperature or regulated environments.
What is the best drop-in replacement for STM32L452RET3?
The STM32L452RET6 is the closest same-family drop-in candidate identified for the STM32L452RET3, using the same 64-pin LQFP footprint and matching 80 MHz, 512 KB Flash, and 160 KB SRAM family parameters. Other STM32L4 candidates can match the package while changing peripherals, memory, temperature grade, or delivery suffix. Review the manufacturer ordering table and complete peripheral mapping before approving any replacement.
Can STM32L462RET6TR replace STM32L452RET3?
The STM32L462RET6TR can be considered for a board-level swap because cross-reference information lists it with the STM32L452RET3 and it uses a 64-pin LQFP package at 80 MHz with 512 KB of Flash. However, pin-to-pin package compatibility does not guarantee identical peripheral mapping or software behavior. Verify every used pin, clock configuration, power mode, communication peripheral, and boot sequence against the STM32L452xx and STM32L462xx documentation.
What can replace STM32L452RET3?
The most defensible replacement is the STM32L452RET6 because it belongs to the same STM32L452 family and retains the 64-pin LQFP footprint, 80 MHz core, 512 KB Flash, and 160 KB SRAM. The STM32L462RET6TR is another package-compatible candidate, while the STM32L452REI3, STM32L462REI6, STM32L431RBI3, and STM32L443RCI6 are listed as related equivalents. Each change requires peripheral, pin, and firmware validation.
Is there a Microchip Technology drop-in equivalent for STM32L452RET3?
No cross-manufacturer drop-in equivalent is established for the STM32L452RET3. The available cross-reference results identify related STM32 devices from STMicroelectronics rather than a pin-compatible Microchip Technology MCU with the same Cortex-M4, memory, peripheral, and package arrangement. A cross-vendor replacement can require different firmware, peripheral mapping, tooling, and board changes, so it must not be treated as a footprint-only substitution.
Where to buy STM32L452RET3 online?
The STM32L452RET3 can be requested through the Request a Quote form on this page for current sourcing, stock confirmation, and order handling. The device is an 80 MHz Cortex-M4 MCU with 512 KB of Flash in a 64-pin LQFP package. The manufacturer product page and authorized distribution listings provide the relevant device identity, while the quote form gives buyers a direct route to confirm quantity, delivery, and lot requirements.
What is the price of STM32L452RET3?
Current pricing for the STM32L452RET3 should be obtained through the Request a Quote form on this page because the 80 MHz Cortex-M4 MCU is offered under quote-based sourcing and price tiers can change with quantity. The component is identified by its 512 KB Flash configuration and 64-pin LQFP package. Submit the required quantity, packaging preference, and target delivery details so the order can be matched to the correct STM32L452RET3 configuration.
What is the lead time and stock status for STM32L452RET3?
Current stock and lead time for the STM32L452RET3 should be confirmed through the Request a Quote form on this page. The exact order code includes a 512 KB Flash STM32L452 device in a 64-pin LQFP package, and the manufacturer lists the STM32L452xx family for low-power embedded applications. Include your required quantity, assembly packaging, shipment destination, and target date when requesting a supply commitment.

Dados de referência de engenharia para STM32L452RET3 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Select the STM32L452RET3 when a design requires the specific STM32L452 combination of an 80 MHz Cortex-M4 core, FPU, 512 KB Flash, 160 KB of SRAM, analog and audio resources, and external-SMPS support in a 64-pin LQFP. The STM32L452RET6 is the most natural same-family drop-in candidate when its exact temperature-grade and delivery suffix satisfy the project. Consider the STM32L462RET6TR when its newer STM32L462 peripheral set provides a required function, but validate pin assignments and firmware. The STM32L452REI3 and STM32L462REI6 require review of qualification and order-code differences. Use the STM32L431RBI3 or STM32L443RCI6 only when memory and peripheral changes can be absorbed. No cross-brand part is treated as a confirmed drop-in replacement.

Comparação com alternativas

Parâmetro Este produto STM32L452RET6 STM32L462RET6TR STM32L452REI3 STM32L462REI6 STM32L431RBI3
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP 64-LQFP 64-LQFP 64-LQFP
Processor Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 Arm Cortex-M4 with FPU Arm Cortex-M4 Arm Cortex-M4
Series STM32L452 STM32L452 STM32L462 STM32L452 STM32L462 STM32L431

Principais diferenciais

  • Exact STM32L452 family configuration (vs STM32L462RET6TR)
  • Closest same-family drop-in path (vs STM32L452RET6)
  • Substantial SRAM for embedded buffering (vs STM32L431RBI3)
  • FPU-enabled 80 MHz processing (vs STM32L431RBI3)

Notas de projeto

Assign every signal from the exact STM32L452RET3 pin-description table before final routing. The 64-LQFP footprint includes power, ground, clock, reset, boot, debug, and peripheral pins, and adjacent pins may serve multiple functions. Preserve the package orientation shown in the manufacturer drawing and verify that exposed programming or debug access remains reachable after assembly.

Plan the 2.5 V or 3.3 V supply path with decoupling and regulator headroom appropriate to the selected operating mode. The low-power architecture does not eliminate startup, analog, clock, and peripheral current, so calculate the worst-case rail load before fixing external component ratings. Use the exact electrical-characteristics tables to determine decoupling capacitance, allowable source impedance, and brownout behavior.

Do not treat another STM32L4 order code as interchangeable solely because it uses a 64-pin LQFP package. Check the STM32L452RET3 pin table against the alternative for used analog channels, timer channels, communication mappings, debug pins, clock sources, and external-SMPS functions. Firmware startup code and peripheral clocks may also need adjustment when moving between STM32L452, STM32L462, STM32L431, or STM32L443 devices.

Estimate power loss from the actual rail voltage, core load, clock configuration, and enabled peripherals rather than using the CPU frequency alone. If the design adds a switched supply, include that converter's efficiency and thermal stress in the system budget. Keep the LQFP solder joints within assembly requirements and use the manufacturer's package and maximum-rating information to set the board's ambient-temperature envelope.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes were not stated for the exact order code, so each remains unknown. Confirm the order-code qualification and environmental specifications in STMicroelectronics documentation before production release.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM32L452RET3 datasheet STM32L452RET3 pinout STM32L452RET3 datasheet pdf STM32L452RET3 80MHz Cortex-M4 STM32L452RET3 512KB flash STM32L452RET3 64-LQFP STM32L452RET3 replacement STM32L452RET3 equivalent STM32L452RET3 vs STM32L462RET6TR STM32L452RET3 price STM32L452RET3 stock STMicroelectronics STM32L452RET3

Componentes & termos relacionados

STMicroelectronics STM32L452RET3 STM32L452RET6 STM32L462RET6TR STM32L452REI3 STM32L462REI6 STM32L431RBI3 STM32L443RCI6 Arm Cortex-M4 floating-point unit FPU 32-bit RISC processor ultra-low-power microcontroller embedded microcontroller semiconductor 100 DMIPS 80 MHz 512 KB Flash 160 KB SRAM 64-LQFP LQFP package surface-mount package analog peripherals audio peripherals external SMPS
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ