STM32L4A6QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
부품 번호: STM32L4A6QGI6 ✓ 활성STM32L4A6QGI6 개요
An ultra-low-power microcontroller is an embedded processing component designed to balance compute performance, energy consumption, and peripheral integration. The STM32L4A6 belongs to the STM32L4 family of 32-bit RISC microcontrollers. Its Arm Cortex-M4 core places it above basic 8-bit and 16-bit embedded controllers in processing capability while retaining a compact, low-power architecture suitable for battery-powered and industrial systems.
The principal verified specifications are an 80 MHz operating frequency, 1 MB of Flash, a 32-bit Arm Cortex-M4 processor, and a 132-UFBGA package. Distributor listings also identify USB OTG, LCD support, and AES functionality. One distributor source additionally lists 114 I/O. These integrated features can reduce the number of external devices required in designs that need USB connectivity, display control, or hardware-assisted secure data processing.
Technically, the STM32L4A6QGI6 is intended for low-power embedded control. Its Cortex-M4 architecture supports efficient interrupt-driven firmware, while the integrated communications and security-oriented features broaden its applicability beyond basic sensor reading or actuator control. The exact RAM size, voltage range, ADC characteristics, GPIO current ratings, and detailed power-consumption figures are not included in the supplied verified excerpts and should be confirmed in the manufacturer documentation before design release.
Typical uses include compact USB-connected control equipment, low-power industrial sensor nodes, display-oriented embedded controls, and security-conscious portable products. The 7 x 7 mm UFBGA package supports dense PCB layouts, although exposed-pad layout, escape routing, assembly profile, and pin-level connectivity require careful review before layout signoff.
The primary design consideration is that a 132-ball package demands disciplined PCB layout and manufacturing controls. Place decoupling capacitors close to supply pins, preserve the package thermal and electrical land pattern specified by STMicroelectronics, and validate USB impedance, power sequencing, and signal routing against the relevant device documentation.
This page consolidates the verified manufacturer and distributor facts, distinguishes documented capabilities from unavailable parameters, and provides package-aware replacement guidance and practical integration notes rather than presenting unsupported specifications as confirmed facts.
드롭인 대체품: STM32L4A6QGI6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32L4A6QGI6 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, Architecture, Audio Support, Core.
STM32L4A6AGI6P
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32L4A6AGI6
✅ 드롭인가격 문의
데이터시트 보기 →STM32L4A6QGI6 최대 정격 & 전기적 특성
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 1 MB (1M x 8) |
| USB Capability | USB OTG |
| Display Capability | LCD support |
| Security Feature | AES |
| I/O Count | 114 I/O |
| 공급 전압 | 3 V |
| 패키지 | 132-UFBGA (7 x 7 mm) |
| 실장 유형 | Surface mount |
| Program Memory Type | Flash |
STM32L4A6QGI6 132-ufbga (7 x 7 mm) 핀 구성 가이드
STM32L4A6QGI6(132-ufbga (7 x 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32L4A6QGI6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32L4A6QGI6 적합 용도: 6 애플리케이션s: USB-connected industrial control, Low-power sensor and data-acquisition node, Display-oriented embedded control, Security-aware portable equipment, Compact communications and network interface, Battery-operated measurement instrument.
USB-connected industrial control
The STM32L4A6QGI6 fits compact USB-enabled industrial controllers because it combines an 80 MHz Arm Cortex-M4 core, 1 MB of Flash, and USB OTG in a 7 x 7 mm 132-UFBGA package. The high-performance 32-bit core can service protocol handling, local control logic, and data acquisition while USB provides a direct host interface. Its compact package also supports space-constrained panels and handheld service tools. The implementation should reserve board area for USB routing and ESD protection, confirm the exact electrical USB requirements from the complete manufacturer documentation, and validate suspended-current behavior before optimizing power consumption.
추천
Low-power sensor and data-acquisition node
The STM32L4A6QGI6 is appropriate for a low-power sensor node because the STM32L4A6 family is positioned as ultra-low power and the device provides an 80 MHz Cortex-M4 core with 1 MB of Flash for local filtering and protocol handling. Its 132-UFBGA footprint limits board area in distributed monitoring equipment, while integrated USB OTG can simplify configuration, data export, or service connections. Exact ADC performance, RAM capacity, and low-power current values are absent from the supplied excerpts, so engineers should confirm sensor excitation, sampling rate, wake-up latency, and buffering requirements against the full manufacturer documentation before finalizing the design.
추천
Display-oriented embedded control
The STM32L4A6QGI6 supports display-oriented embedded control through its verified LCD capability, 80 MHz Cortex-M4 processing throughput, and 1 MB of programmable Flash. Engineers can use the MCU to coordinate user input, graphics updates, and supervisory control functions without relying on a separate display controller for every interface. Its 132-UFBGA 7 x 7 mm package is useful in compact panels, but the high ball count makes careful escape routing and layer assignment important. The supplied excerpts do not identify the supported LCD panel sizes or electrical timing, so the display interface should be checked directly against the complete STM32L4A6 documentation.
추천
Security-aware portable equipment
The STM32L4A6QGI6 can support portable equipment requiring a compact general-purpose controller and verified AES capability. The 80 MHz Cortex-M4 core provides capacity for control logic, data preparation, and cryptographic operations, while the 132-UFBGA package limits board footprint in wearables, service tools, and compact readers. USB OTG may support encrypted configuration transfer or device connectivity. Designers should not treat the presence of AES as a complete security architecture: key storage, random-number requirements, boot protection, authentication, and update procedures must be evaluated, and the exact cryptographic implementation details require the manufacturer documentation.
추천
Compact communications and network interface
The STM32L4A6QGI6 is well suited to compact communications equipment because its 80 MHz Cortex-M4 core, 1 MB Flash, USB OTG, and AES capability support protocol processing, secure data handling, and configuration tasks in one device. A 132-UFBGA package allows the controller to sit beside network or serial-interface circuitry in space-constrained gateways. USB can serve as a management or service connection. For production designs, engineers should validate transceiver levels, isolation requirements, protocol timing, and connector protection, and should avoid assuming that general processor performance alone guarantees a particular network throughput.
추천
Battery-operated measurement instrument
The STM32L4A6QGI6 can serve as the central controller in a battery-operated measurement instrument because the STM32L4A6 is an ultra-low-power MCU family member and the device combines 1 MB Flash with USB OTG for configuration and data transfer. The 132-UFBGA package preserves board area, and the Cortex-M4 core can coordinate sensors, controls, and local data processing. A defensible battery-life calculation still requires verified sleep, stop, active, and USB-suspend current values, none of which appear in the supplied excerpts. Use manufacturer power data under the intended temperature and workload, then include regulator quiescent current and peripheral leakage in the system budget.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32L4A6QGI6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32L4A6AGI6P | STM32L4A6AGI6 |
|---|---|---|---|
| Package | 132-UFBGA (7 x 7 mm) | 132-UFBGA (7 x 7 mm) | 132-UFBGA (7 x 7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
주요 차별점
- Verified USB, LCD, and AES integration (vs STM32L4A6AGI6)
- Verified 80 MHz Cortex-M4 operating point (vs STM32L4A6AGI6P)
- Confirmed production order configuration (vs STM32L4A6AGI6P)
설계 노트
Treat the 132-UFBGA land pattern as a manufacturer-controlled constraint rather than a generic footprint. Confirm ball locations, pad dimensions, solder-mask definition, paste apertures, and board stack-up against STMicroelectronics’ package documentation before routing. Keep decoupling paths short and place each bulk capacitor near the supply ball it serves; high-ball-count BGAs can conceal long return paths that appear electrically short on a schematic but add excessive loop area.
Build the power budget from verified operating-mode currents rather than the “ultra-low-power” family description. The supplied excerpts do not include active, sleep, stop, shutdown, or USB-suspend current, so runtime and battery-life calculations cannot be completed. Include MCU current, regulator quiescent current, external pull networks, sensors, and communications hardware, then evaluate worst-case operation at the highest intended temperature. Revisit the calculation whenever firmware changes the clock, peripherals, or low-power mode.
Preserve clean return paths under the device and separate sensitive analog routes from USB, clock, and fast-switching nodes. USB signal integrity must be evaluated with the actual stack-up and connector, while ADC or sensor inputs should use appropriate grounding and shielding techniques. Because the package uses a 7 x 7 mm footprint with 132 balls, use the official via-in-pad and assembly guidance rather than assuming that every exposed manufacturing process supports dense escape routing.
Do not substitute an STM32L4A6 order code based only on family name or package size. Ordering suffixes can identify memory, temperature grade, qualification status, or package options, and the supplied evidence does not provide a complete comparison for the alternatives. Before a purchase substitution, compare the official ordering-information table, pin definitions, electrical characteristics, peripheral population, and errata documents. Firmware compatibility and production change-control must also be reviewed.
규정 준수 정보
The supplied manufacturer and distributor excerpts do not provide explicit compliance declarations. AEC-Q100 is marked not applicable because the part is an MCU rather than an automotive-qualified power semiconductor, not because an automotive qualification has been established.
