Microchip Technology

SY88813VKG - 155Mbps PECL Post Amplifier | Microchip Technology

부품 번호: SY88813VKG ✓ 활성
3.3V to 5V Vdss 10-MSOP / 10-TFSOP Package
MOQ: 1 |

SY88813VKG 개요

The Microchip Technology SY88813VKG is a 3.3V/5V, 155Mbps PECL limiting post amplifier packaged in a 10-MSOP or 10-TFSOP outline. It is designed for high-speed digital communication links where a received signal must be limited, reshaped, and redriven before passing to a downstream serializer, comparator, or clock/data recovery circuit. The device supports both 3.3V and 5V supply operation, making it useful in mixed-voltage systems where signal compatibility and controlled PECL output levels are important.

A PECL post amplifier is a specialized high-speed signal-conditioning device within the broader amplifier and interface IC category. PECL, or positive emitter-coupled logic, uses a differential or pseudo-differential voltage arrangement to provide fast transitions and reliable high-speed transmission. The SY88813VKG provides the limiting and drive function needed when an incoming high-speed signal has suffered attenuation, distortion, or incompatible voltage levels. Its 155Mbps rating makes it appropriate for legacy and mid-speed serial interfaces, telecommunications equipment, clock distribution, and industrial control links.

The principal electrical features are 3.3V/5V operation, a data rate up to 155Mbps, PECL-compatible output signaling, and a low-noise single limiting-amplifier configuration. The device is intended to preserve signal integrity across short PCB or cable-driven interconnect paths while giving the receiver a predictable logic-level output. The post-amplifier topology is especially useful when the source device cannot directly meet the voltage, loading, or edge-rate requirements of the next stage.

SY88813VKG is suitable for applications such as telecommunications backplanes, network-interface signal conditioning, clock and data distribution, industrial automation, instrumentation, and test equipment. It can also serve in systems that require a limiting amplifier after a long trace, connector, or cable run. The 10-MSOP package supports compact board layouts, but the exposed-pad and thermal details must be followed according to the manufacturer’s package drawing and recommended land pattern.

When laying out a design, keep the high-speed path short and continuous, provide solid ground-plane return paths, and place supply-decoupling capacitors close to the device. Avoid long stubs and unnecessary test pads on critical traces. Confirm that the downstream device accepts the PECL output level and that the system’s termination strategy is compatible with the driver impedance. The SY88813VKG datasheet should be used for the exact pin assignment, recommended circuit, absolute maximum ratings, and package dimensions.

드롭인 대체품: SY88813VKG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: SY88813VKG (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Data Rate.

Microchip Technology
Maximum Data Rate: 155 Mbps
비교 대상: SY88813VKG →

SY88813VKC

✅ 드롭인
Microchip Technology
📦 10-MSOP / 10-TFSOP
Limiting postamplifier IC · 155 Mbps · 3.3 V or 5 V · PECL · PECL signal detect · Optical networks · 10-MSOP · 3.00 mm width

가격 문의

데이터시트 보기 →

SY88813VKG 최대 정격 & 전기적 특성

Device Type Limiting post amplifier
Logic Family PECL
공급 전압 3.3V to 5V
Maximum Data Rate 155Mbps
Channel Count 1
패키지 10-MSOP / 10-TFSOP
Package Width 3.00mm
Package Length 0.118 inch
실장 유형 Surface Mount
출력 유형 PECL
Amplifier Type Limiting amplifier
Signal Standard Positive ECL
Operating Voltage 3.3V/5V
Maximum Data Rate 155Mbps

SY88813VKG 0.118 inch 핀 구성 가이드

SY88813VKG(0.118 inch 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

SY88813VKG의 0.118 inch 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: SY88813VKG.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

SY88813VKG 적합 용도: 6 애플리케이션s: Telecommunications Backplane Interfaces, Clock and Data Redrive, Industrial Control and Automation, Test and Measurement Equipment, Network and Communication Equipment, Instrumentation and Sensor Signal Conditioning.

🌐

Telecommunications Backplane Interfaces

The SY88813VKG fits telecommunications backplane links that need a received PECL signal limited and redriven before it reaches another communications block. Its 155Mbps rating provides a defined operating target for legacy T1/E1, clock, and parallel-to-serial interface environments, while 3.3V/5V operation supports both newer low-voltage systems and established 5V PECL equipment. The post-amplifier stage should be placed close to the receiver or source when the interconnect includes a connector or long trace. Designers should preserve a continuous ground reference and use the manufacturer’s recommended input and output termination. The main performance consideration is edge quality: poor impedance control or excessive loading can reduce the benefit of redrive even when the nominal data rate is within specification.

⚡

Clock and Data Redrive

The SY88813VKG can condition a clock or data signal that has been distributed through a board trace, connector, or cable before reaching a downstream logic device. Its limiting-post-amplifier architecture is intended to restore a usable digital waveform, and the 155Mbps specification defines the intended speed class. The circuit is especially useful when the next device expects a defined PECL interface rather than a generic CMOS level. Keep the redrive stage physically close to the receiver-side device, maintain a short ground path, and check the source and destination logic thresholds. The design tradeoff is that the amplifier does not remove the need for good board-level signal integrity; it improves signal compatibility and drive after losses have accumulated.

🏭

Industrial Control and Automation

The SY88813VKG is suitable for industrial control equipment that transports PECL-compatible clock, trigger, or status signals between circuit sections. The 3.3V/5V supply flexibility allows the interface stage to bridge different logic domains while maintaining the voltage conventions expected by PECL receivers. For factory equipment, the exact suffix-specific temperature rating and reliability qualification should be confirmed before use in a high-temperature enclosure. The 10-MSOP package also helps keep the interface compact, but the exposed thermal-pad connection, if applicable to the selected package, must follow the recommended land pattern. Signal-conditioning performance depends on controlled impedance and correct termination, especially when the link crosses an isolation barrier or long harness.

🖥️

Test and Measurement Equipment

The SY88813VKG can serve as a signal-conditioning element in test and measurement systems that need to recover a high-speed PECL waveform before comparison, triggering, or acquisition. A limiting post amplifier is useful when a source is operating close to the receiver’s threshold or when a fixture introduces attenuation and reflections. The 155Mbps specification makes the device appropriate for moderate-speed instrumentation rather than ultra-high-speed optical or serial protocols. In a test fixture, minimize adapter and trace length, use a low-inductance ground return, and compare the conditioned signal against the receiver’s allowable input capacitance. The post amplifier should not be treated as a substitute for correct fixture termination or shielding.

🌐

Network and Communication Equipment

The SY88813VKG is applicable to network and communication equipment requiring a compact PECL redrive or limiting stage for legacy high-speed interconnects. Its 3.3V/5V flexibility can simplify interface design in equipment that combines newer control logic with established PECL clock and data paths. The 155Mbps rating is suitable for established communication-interface speeds and should be compared directly against the system’s worst-case bit rate and rise-time requirement. Placement near the receiving device reduces sensitivity to trace loss and impedance discontinuities. Designers should also verify the output voltage levels against the downstream PECL receiver and account for any required bias or termination network shown in the manufacturer application circuit.

🔧

Instrumentation and Sensor Signal Conditioning

The SY88813VKG can be used in instrumentation designs where a digital control, synchronization, or status signal must be redriven after passing through a long PCB route or connector. The post-amplifier stage helps establish consistent PECL-compatible levels at the receiver while preserving the intended digital transition rate. The 10-MSOP package permits placement close to the sensitive receiving circuitry, which can improve repeatability in compact multi-board systems. The principal tradeoff is that this device is optimized for digital PECL signaling, not low-noise analog sensor amplification. Analog front ends should therefore use dedicated amplifier channels, while the SY88813VKG is reserved for clock, trigger, or communication signals that require digital redrive.

What is the SY88813VKG?
The SY88813VKG is a single-channel limiting post amplifier from Microchip Technology designed for 3.3V/5V PECL high-speed signal conditioning. According to the manufacturer product information, it is a 155Mbps PECL post amplifier in a 10-MSOP or 10-TFSOP package. It is used to restore, limit, and redrive incoming digital signals before they enter a downstream high-speed logic device.
What is the operating voltage of SY88813VKG?
The SY88813VKG supports 3.3V and 5V operation. This makes it suitable for systems that use either common PECL supply rails or mixed low-voltage and legacy high-speed interfaces. The exact absolute maximum ratings and pin-specific supply connections should be confirmed in the manufacturer datasheet before applying the device outside the documented operating conditions.
What data rate does SY88813VKG support?
The SY88813VKG is specified as a 155Mbps PECL post amplifier. That rating identifies its intended high-speed digital signal-conditioning role, rather than a general-purpose analog amplifier application. Use the manufacturer’s recommended circuit and signal-integrity layout when operating near the rated data rate, especially when long traces or connectors are present.
Where can I download the SY88813VKG datasheet PDF?
The SY88813VKG datasheet is available through the manufacturer’s product page and the listed datasheet references. The product documentation identifies the device as a 3.3V/5V, 155Mbps PECL limiting post amplifier in a 10-MSOP package. Download the current manufacturer document for authoritative pin assignments, absolute maximum ratings, electrical characteristics, and recommended application circuits.
Where is the SY88813VKG pinout?
The SY88813VKG pinout is defined in the manufacturer datasheet and package drawing for its 10-MSOP or 10-TFSOP outline. The package contains ten numbered positions, with the exact power, ground, input, and output assignments shown in the datasheet pin-description table. Use that table when assigning PCB tracks and confirming exposed-pad requirements.
Can SY88813VKG be used in a 3.3V system?
Yes, the SY88813VKG is identified as a 3.3V/5V PECL limiting post amplifier. It can therefore be considered for 3.3V systems when the input amplitude, output levels, termination, and downstream receiver requirements satisfy the manufacturer’s operating guidance. The supply voltage alone does not determine compatibility, so verify the complete signal interface and pin configuration.
What is the difference between SY88813VKG and SY88813VKC?
The SY88813VKG and SY88813VKC are related Microchip Technology orderable versions of the SY88813 family. The available comparison information describes both as 3.3V/5V, 155Mbps PECL post amplifiers in the 10-MSOP family, while the suffix and ordering details must be checked for packaging and commercial differences. Use the manufacturer ordering table to confirm that the selected suffix matches the required tube, reel, temperature, or other order code.
What is the best drop-in replacement for SY88813VKG?
The closest documented same-family candidate is SY88813VKC, which is described as a functionally similar 3.3V/5V, 155Mbps PECL post amplifier in the same 10-MSOP family. It should be treated as a conditional replacement until the exact suffix, pin configuration, temperature grade, and ordering code are verified. No additional drop-in candidate is established by the available cross-reference results.
What can replace SY88813VKG?
SY88813VKC is the available same-family alternative for the SY88813VKG. It shares the stated 155Mbps PECL limiting post-amplifier function and 10-MSOP package family, but the available comparison information notes that main parameters and circuit structure may differ. A replacement is appropriate only after checking the manufacturer pinout, suffix-specific specifications, and downstream interface requirements.
When should I choose SY88813VKG over SY88813VKC?
Choose the exact SY88813VKG orderable suffix when its documented temperature grade, packaging, and ordering configuration match the design and procurement requirements. Choose SY88813VKC only after confirming that its suffix-specific characteristics preserve the required pinout, supply operation, signal levels, and environmental margin. The two parts are related, but suffix verification is essential before treating them as interchangeable.
Is SY88813VKG suitable for clock distribution?
Yes, the SY88813VKG can be used in clock-distribution and other high-speed digital signal-conditioning paths when the clock amplitude and PECL interface requirements are compatible. Its 155Mbps rating makes it appropriate for many legacy telecommunications, industrial-control, and instrumentation links. Keep clock traces short, provide continuous return paths, and follow the manufacturer’s termination and decoupling guidance.
How should I design the PCB layout for SY88813VKG?
Place the SY88813VKG close to the high-speed signal source and keep the input and output traces short, continuous, and referenced to an uninterrupted ground plane. Place decoupling capacitors near the power pins and avoid long stubs, excessive vias, and unnecessary test pads. For 155Mbps operation, controlled impedance and correct PECL termination are as important as logical connectivity.
Is SY88813VKG RoHS compliant?
The RoHS status of the SY88813VKG is not explicitly stated in the available product-page information. Do not assume compliance from the package or manufacturer name alone. Check the manufacturer’s current declaration, product documentation, or material-compliance records for the exact ordering code before releasing the part into a RoHS-controlled design.
Where can I buy SY88813VKG and what is its lead time?
The available distributor listing identifies SY88813VKG as a Microchip Technology part with immediate-shipment inventory and an estimated delivery window of April 3 through April 8. Commercial stock and timing can change, so use the Request a Quote form on this page for current quantity, pricing, and lead-time confirmation. The final order code and package configuration should be stated in the request.
How does SY88813VKG compare with a general-purpose amplifier?
The SY88813VKG is optimized for high-speed digital PECL signal conditioning rather than analog gain control or precision measurement. Its 155Mbps limiting-post-amplifier function targets digital edge restoration and output redrive, whereas a general-purpose amplifier may be selected for gain, bandwidth, linearity, or low-noise analog performance. The comparison information identifies SY88813VKC as functionally similar, but not necessarily identical in every main parameter.

엔지니어링 참조 데이터: SY88813VKG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the SY88813VKG when the design requires a dedicated 3.3V/5V PECL limiting post amplifier for operation up to 155Mbps and the exact suffix matches the required package and environmental conditions. SY88813VKC is the documented same-family alternative when its ordering code, pin configuration, temperature range, and electrical details match the existing board. Neither part should be selected solely by the function label: confirm the input threshold, output levels, termination requirements, package dimensions, and exposed-pad layout. A generic amplifier may offer more analog flexibility, but it will not necessarily provide the specified PECL redrive behavior. For new 155Mbps designs, prioritize an exact manufacturer-supported configuration and validate the complete interface with controlled-impedance layout.

대체품과의 비교

파라미터 이 제품 SY88813VKC
Package 10-MSOP / 10-TFSOP 10-MSOP family
Brand Microchip Technology Microchip Technology
Device Type Limiting post amplifier Limiting post amplifier
Supply Voltage 3.3V/5V 3.3V/5V
Maximum Data Rate 155Mbps 155Mbps
Output Standard PECL PECL
Channel Count 1 1
Mounting Type Surface Mount Surface Mount
Package Width 3.00mm 3.00mm

주요 차별점

  • Dedicated PECL signal-conditioning function (vs SY88813VKC)
  • 3.3V/5V operating flexibility (vs SY88813VKC)
  • Compact surface-mount implementation (vs SY88813VKC)

설계 노트

Route the high-speed input and output as short, continuous traces with a continuous ground-plane reference. Avoid long stubs, unnecessary vias, and test pads on the signal path. The SY88813VKG is intended for 155Mbps PECL operation, so controlled impedance and correct source/load termination are essential to preserve edge quality and avoid reflections.

Place the bypass capacitors immediately adjacent to the supply and ground pins, using the manufacturer-recommended values and layout. Keep the supply return path short and verify that the selected 3.3V or 5V rail can support the required output current and transition loading. The post-amplifier’s high-speed edges can create transient demand even when its average current is modest.

Do not substitute a generic amplifier solely because it has adequate bandwidth. Verify the PECL input threshold, output levels, supply range, pin assignment, signal polarity, and termination arrangement for the exact suffix. The available comparison describes SY88813VKC as similar but not necessarily identical in all main parameters, so suffix-specific datasheet review is required before replacement.

The 10-MSOP package is compact and can limit heat dissipation when operated with fast edges or sustained high activity. Use the package drawing and manufacturer thermal information to determine whether the exposed pad requires a thermal-via pattern. Keep nearby regulators and high-current switching stages physically separated where practical, and validate the worst-case ambient temperature and enclosure conditions.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for SY88813VKG. Confirm the exact suffix with the manufacturer’s current compliance documentation.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

SY88813VKG datasheet SY88813VKG pinout SY88813VKG datasheet pdf SY88813VKG 155Mbps PECL SY88813VKG 3.3V 5V amplifier SY88813VKG equivalent SY88813VKG replacement SY88813VKG vs SY88813VKC SY88813VKG footprint SY88813VKG price Microchip Technology SY88813VKG SY88813VKG application circuit SY88813VKG stock SY88813VKG cross reference

관련 부품 & 용어

Microchip Technology SY88813VKG SY88813VKC limiting post amplifier high-speed signal conditioner PECL positive emitter-coupled logic amplifier IC interface IC semiconductor 155Mbps 3.3V 5V 10-MSOP 10-TFSOP surface mount telecommunications industrial automation clock distribution signal integrity termination decoupling capacitor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기