NXP Semiconductors

TJA1048TK Dual High-Speed CAN Transceiver | NXP

부품 번호: TJA1048TK ✓ 활성
5 V Vdss 14-HVSON (3 x 4.5 mm) Package
MOQ: 1 |

TJA1048TK 개요

NXP Semiconductors TJA1048TK is a dual high-speed CAN transceiver with Standby mode, supplied in a 14-HVSON surface-mount package measuring 3 x 4.5 mm. It provides two CAN channels, each supporting differential transmit and receive between a CAN protocol controller and a physical two-wire CAN bus. The transceiver operates from a nominal 5 V supply and uses a 0.65 mm terminal pitch for compact automotive and industrial electronics designs.

A CAN transceiver is the physical-layer interface between a digital CAN controller and the wired communication bus. It converts controller logic into differential bus signals and converts received bus levels into logic signals for the controller. Within the hierarchy of automotive communication electronics, the TJA1048TK belongs to the CAN transceiver class, connecting CAN protocol controllers to the vehicle network while supporting high-speed data transfer.

The TJA1048TK combines two independent CAN transceiver channels in one compact package. Its dual-channel architecture reduces the component count and board area required for systems using more than one CAN bus. Standby mode provides an operating state for controlling power consumption or temporarily disabling communication. The small-outline HVSON package is intended for space-constrained assemblies where a conventional leaded or larger-outline package would be less suitable.

The 14-terminal package supports a nominal 5 V operating supply, and its 0.65 mm pitch permits compact routing under automotive-style density constraints. The NXP product page specifies reel-reel packing on 13-inch reels, a minimum package quantity of 6000, a minimum order quantity of 6000, and a stated lead time of 10 weeks. These manufacturing and ordering details make the TJA1048TK appropriate for automated production planning as well as technical evaluation.

Typical uses include automotive body and comfort electronics, engine-control systems, industrial automation equipment, motor-control systems, and other embedded products with one or two CAN communication links. In a two-channel design, one transceiver can serve a body-control module, gateway, diagnostic interface, or automation controller where separate CAN controllers require a common physical-layer device.

PCB implementation should prioritize short CAN traces, a continuous ground reference beneath the transceiver, and compliant decoupling from the nearby supply pins. Because high-speed differential signaling depends on impedance control and symmetry, component placement, trace geometry, connector transitions, and the protection network must be designed together. Use the manufacturer datasheet pin-description table and application guidance when assigning every terminal and selecting bypass capacitance.

This product page combines the manufacturer interface description, ordering information, package dimensions, termination, and practical PCB guidance. It also distinguishes documented functions from unknown electrical details, helping engineers assess TJA1048TK suitability without changing the component or inventing specifications that the manufacturer has not published for this ordering code.

드롭인 대체품: TJA1048TK — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

TJA1048TK 사양

Product Type Dual high-speed CAN transceiver with Standby mode
CAN Channel Count 2 channels
Nominal Supply Voltage 5 V
Bus Interface Differential CAN transmit and receive on a two-wire bus
패키지 14-HVSON (3 x 4.5 mm)
Terminal Count 14 terminals
Terminal Pitch 0.65 mm
실장 유형 Surface mount
Packing Reel-reel, 13-inch reel
Minimum Package Quantity 6000 pieces
Minimum Order Quantity 6000 pieces
Stated Lead Time 10 weeks
Operating Mode Standby mode
Target Application High-speed automotive CAN communication

TJA1048TK 6000 pieces 핀 구성 가이드

TJA1048TK(6000 pieces 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

TJA1048TK의 6000 pieces 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TJA1048TK.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TJA1048TK 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Vehicle Network Gateway, Industrial Automation Controller, Motor Control and Diagnostics, CAN Communication Test Module, Embedded Diagnostic Interface.

🚗

Automotive Body Control Module

The TJA1048TK fits a body-control module that must connect a microcontroller or application processor to two vehicle CAN networks. Its two high-speed CAN channels consolidate multiple bus interfaces into one 14-HVSON device, while the compact 3 x 4.5 mm package preserves board area. With a nominal 5 V supply and 0.65 mm terminal pitch, the part supports dense automotive electronics layouts. The final design should follow the manufacturer application guidance for CAN line protection, termination, decoupling, and layout symmetry.

🚗

Vehicle Network Gateway

A vehicle network gateway can use the TJA1048TK for two differential CAN links that connect separate bus domains to gateway logic. Its dual-channel arrangement reduces the number of physical-layer transceivers required beside the gateway controller. The small 14-HVSON outline is especially useful when gateway boards must accommodate additional communication, memory, and processing functions. Bus-side protection, common-mode handling, and standby control should be designed according to the NXP datasheet and the vehicle's EMC requirements.

🏭

Industrial Automation Controller

The TJA1048TK is suitable for industrial automation equipment that participates in two CAN networks for sensor, actuator, or machine-control communication. It provides the differential transmit and receive interface expected by a CAN protocol controller and operates from a nominal 5 V rail. The dual-channel 14-HVSON package reduces board space, while Standby mode supports controlled operating states. Industrial implementations should add appropriate bus protection and verify EMC performance for the installation environment.

🔧

Motor Control and Diagnostics

In a motor-control or service-diagnostic unit, the TJA1048TK can support two high-speed CAN connections from one controller. One channel may handle runtime control traffic while another supports diagnostics or a secondary machine network. The device's differential CAN interface matches a controller-based architecture, and its 3 x 4.5 mm package leaves room for power conversion and signal-conditioning components. Keep the CAN routing away from high-switching-current paths and validate the completed board against industrial EMC requirements.

🖥️

CAN Communication Test Module

A compact communications test module can use the TJA1048TK to provide two high-speed CAN physical interfaces for monitoring, routing, or protocol testing. The dual-channel arrangement allows one controller to handle two independent bus connections without requiring two separate transceiver packages. The small HVSON outline supports portable test equipment where PCB area is constrained. Designers should preserve symmetry between CANH and CANL, include accessible test points, and follow the reference circuit for supply filtering and bus protection.

🔧

Embedded Diagnostic Interface

The TJA1048TK can form the CAN physical layer of an embedded diagnostic or service interface that needs two links. One path may communicate with a primary controller while another connects to a secondary diagnostic network. Its nominal 5 V operation and compact surface-mount package align with embedded controller boards, and Standby mode can support managed operating states. Confirm the terminal assignments and logic levels in the manufacturer pin table, then apply the specified bus protection and termination strategy.

What is the TJA1048TK?
The TJA1048TK is a dual high-speed CAN transceiver with Standby mode from NXP Semiconductors. According to the manufacturer datasheet, it provides differential transmit and receive capabilities between a CAN protocol controller and the physical two-wire CAN bus. The device combines two CAN channels in a compact 14-HVSON package measuring 3 x 4.5 mm, making it suitable for high-speed automotive and industrial communication designs.
How many CAN channels does the TJA1048TK support?
The TJA1048TK supports two independent CAN transceiver channels. Each channel provides the differential physical-layer interface required by a CAN protocol controller, including transmit and receive functions. According to the NXP product description, the dual-channel configuration is intended for high-speed CAN systems and can reduce board area in equipment that needs two CAN links, such as vehicle gateways, body-control modules, and industrial controllers.
What package and terminal pitch does the TJA1048TK use?
The TJA1048TK uses a 14-terminal HVSON package measuring 3 x 4.5 mm with a 0.65 mm terminal pitch. NXP lists the device as a surface-mount, small-outline package intended for compact assemblies. The package information supports footprint planning in applications that require two CAN channels, although the complete land pattern and exposed-pad requirements should be taken directly from the manufacturer package drawing.
What supply voltage does the TJA1048TK use?
The TJA1048TK operates from a nominal 5 V supply. The manufacturer product information identifies a nominal voltage of 5 V, while the complete operating range, current consumption, and undervoltage behavior are not stated in the product-page summary. Before designing the power rail, use the TJA1048 manufacturer datasheet to confirm the exact supply limits, decoupling requirements, and electrical conditions for every operating mode.
What is Standby mode in the TJA1048TK?
Standby mode is an operating state identified in the TJA1048TK product description that allows the dual CAN transceiver to enter a lower-activity state. Its exact electrical behavior and channel-state configuration must be verified in the manufacturer datasheet. Designers should treat Standby mode as a control and power-management feature, not as bus disconnect, and confirm how the CAN controller interacts with the transceiver enable and standby signals.
Where can I download the TJA1048TK datasheet PDF?
The official TJA1048 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1048.pdf. The document describes the dual high-speed CAN transceiver, differential transmit and receive functions, and operation with a CAN protocol controller. Use its pin-description table, electrical characteristics, application diagram, and package outline when completing PCB and schematic reviews for the TJA1048TK.
Where can I find the TJA1048TK pinout?
The TJA1048TK pinout is documented in the pin-description table and package drawing within the official NXP TJA1048 datasheet. The device has 14 terminals in a 3 x 4.5 mm HVSON package with a 0.65 mm pitch. Assign each terminal from that table rather than relying on visual inspection or generic HVSON drawings, particularly for supply, ground, CANH, CANL, and control functions.
Can the TJA1048TK be used in automotive systems?
The TJA1048TK is specifically described by NXP as a transceiver designed for high-speed CAN applications in the automotive industry. Its dual-channel architecture and compact HVSON package fit electronic control modules that connect CAN protocol controllers to two-wire vehicle networks. The manufacturer datasheet should be used to confirm environmental, EMC, and qualification requirements for the exact production context before the device is approved for a safety-related or automotive program.
What is the best drop-in replacement for the TJA1048TK?
No confirmed drop-in replacement for the TJA1048TK was identified from the documented cross-reference results. A valid replacement must preserve the 14-HVSON footprint, terminal arrangement, dual-channel CAN functions, nominal 5 V supply, Standby behavior, and the required transmit and receive performance. The TJA1048T ordering variant cannot be assumed compatible because its package and terminal details must be verified before it is considered for the same PCB.
What can replace the TJA1048TK?
The TJA1048TK can only be replaced safely by a dual high-speed CAN transceiver that matches its 14-HVSON footprint and pin functions. No candidate with verified pin-to-pin equivalence was established for this package, so changing manufacturers may require a PCB redesign and fresh EMC validation. Review the official NXP datasheet for required CANH, CANL, supply, ground, enable, and standby connections, then compare every terminal before approving a substitute.
Is the TJA1048TK the same as the TJA1048T?
No, the TJA1048TK and TJA1048T should not be treated as identical merely because both are TJA1048-family devices. The TJA1048TK is listed in a 14-HVSON package, while the TJA1048T ordering code requires separate package verification. A suffix or ordering-code change can alter the physical footprint, so confirm the TJA1048T package drawing and pinout before considering it as a replacement for the TJA1048TK.
When should I choose the TJA1048TK over a single-channel CAN transceiver?
Choose the TJA1048TK when the design needs two CAN physical-layer interfaces and can benefit from integrating both channels into one 14-HVSON package. A single-channel transceiver may be simpler for a one-link product, but the TJA1048TK reduces duplicated circuitry and board area in gateways, body-control modules, and industrial controllers. Verify that both channels will be used and that the common package fits the mechanical and thermal design.
What applications are best suited to the TJA1048TK?
The TJA1048TK is best suited to automotive and industrial systems needing two high-speed CAN links. Typical uses include body-control modules, vehicle gateways, diagnostic interfaces, automation controllers, and motor-control equipment. Its 5 V nominal supply and compact 3 x 4.5 mm HVSON package support space-constrained embedded designs, while the manufacturer's high-speed CAN positioning makes it appropriate for communication between a CAN controller and a physical two-wire bus.
What are the key specifications of the TJA1048TK that engineers should know?
The TJA1048TK is a dual high-speed CAN transceiver with Standby mode, a nominal 5 V supply, and a 14-HVSON package measuring 3 x 4.5 mm. Its terminal pitch is 0.65 mm, and NXP specifies reel-reel packing with 6000 pieces as the minimum package and order quantity. The stated manufacturer lead time is 10 weeks. Other electrical characteristics should be confirmed from the official datasheet.
How much does the TJA1048TK cost and where can it be ordered?
Current commercial pricing, stock, and a firm delivery commitment should be requested through the Request a Quote form on this page. The NXP product page states a 10-week lead time, a minimum order quantity of 6000 pieces, and reel-reel packing, but quotation terms can vary with quantity and supply conditions. Submit the exact TJA1048TK ordering code when requesting a quotation to avoid package or packing ambiguity.
How should CAN traces and decoupling be laid out for the TJA1048TK?
Place the TJA1048TK close to the CAN connector or protected bus entry point, keep CANH and CANL traces short and geometrically symmetric, and maintain a continuous ground reference beneath the routing. Follow the manufacturer application circuit for supply bypass capacitors and connect the protection network so high-energy transients do not enter the transceiver pins. Validate the final differential impedance and bus termination with the complete PCB stack-up.

엔지니어링 참조 데이터: TJA1048TK — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TJA1048TK when a design requires two high-speed CAN physical-layer interfaces and can use the 14-HVSON footprint, nominal 5 V supply, and documented Standby behavior. Its 3 x 4.5 mm package is useful in compact body-control modules, gateways, automation controllers, and diagnostic equipment. A single-channel CAN transceiver is preferable when only one link is required because it can simplify schematic review and reduce unused circuitry. No confirmed drop-in replacement was identified for the TJA1048TK, so an alternative should be selected only after its HVSON land pattern, all 14 terminal functions, CAN timing, supply limits, protection behavior, and standby logic have been compared with the manufacturer datasheet. Changing ordering suffixes or manufacturers without that verification can require a PCB redesign and renewed EMC validation.

대체품과의 비교

파라미터 이 제품
Brand NXP Semiconductors
Package 14-HVSON (3 x 4.5 mm)
Terminal Count 14 terminals
Terminal Pitch 0.65 mm
CAN Channel Count 2 channels
Product Type Dual high-speed CAN transceiver
Nominal Supply Voltage 5 V
Operating Mode Standby mode
Packing Reel-reel, 13-inch reel
Minimum Package Quantity 6000 pieces
Minimum Order Quantity 6000 pieces
Stated Lead Time 10 weeks

주요 차별점

  • Two CAN channels in one compact package (vs Single-channel CAN transceivers)
  • Compact automotive-oriented package (vs Larger-outline 14-pin CAN transceivers)
  • Standby operating support (vs CAN transceivers without a documented standby state)

설계 노트

Route CANH and CANL as a closely coupled differential pair with symmetric geometry, continuous ground reference, and minimal stubs. Place the transceiver near the connector or protection network so transient-current paths do not traverse sensitive logic areas. Keep the pair away from switching power inductors and high-current return paths. Confirm the target differential impedance and the complete board stack-up during PCB design, then verify signal and mode performance on the assembled design.

Use the TJA1048 manufacturer application diagram to select and place the supply bypass network near the device. Keep the CAN termination arrangement compatible with the network topology and locate protection components where surge or ESD current can be diverted before reaching the transceiver. The 0.65 mm terminal pitch and compact 3 x 4.5 mm HVSON outline require careful footprint and assembly checks, including the exposed-pad connection and paste pattern shown in the package documentation.

Do not treat TJA1048 ordering suffixes as automatically interchangeable: the TK suffix is associated with the 14-HVSON package, while another suffix may use a different outline. Verify pin functions, exposed-pad requirements, supply limits, and standby logic directly from the relevant datasheet before substitution. Also avoid assuming that a CAN transceiver replaces the CAN protocol controller; the controller and transceiver remain separate functional blocks in the network architecture.

High-speed CAN signaling depends on a physically consistent bus implementation. Match connector and transceiver impedances, provide the correct bus termination, and use a protection network designed for the installation environment. Check radiated and conducted emissions because common-mode currents on CAN wiring can couple into adjacent circuits. The manufacturer's EMC guidance and application circuit should form the basis for the final protection and filtering design.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The automotive application is stated by NXP, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this ordering code.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

TJA1048TK datasheet TJA1048TK pinout TJA1048TK datasheet pdf TJA1048TK equivalent TJA1048TK replacement TJA1048TK cross reference TJA1048TK footprint TJA1048TK application circuit TJA1048TK price TJA1048TK stock NXP TJA1048TK TJA1048TK 14-HVSON

관련 부품 & 용어

NXP Semiconductors TJA1048TK TJA1048 CAN transceiver Controller Area Network CAN protocol controller physical-layer interface high-speed CAN dual-channel CAN differential transmit differential receive two-wire CAN bus Standby mode 14-HVSON HVSON package family surface-mount package SMD 0.65 mm terminal pitch nominal 5 V supply automotive electronics industrial automation body control module vehicle gateway CAN bus termination ESD protection
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기