Texas Instruments
TPS548B28RWWR - 20A 16V Sync Buck Converter | TI | Datacenter
부품 번호: TPS548B28RWWR ✓ 활성
재고 있음
영업일 기준 1~3일 내 발송
4 V to 16 V Vdss
20 A Id
7.7 mΩ Rds(on)
21-PowerVFQFN (RWW) Package
시작가 $1
USD / 개
MOQ: 1 |
가격 업데이트: 2026-09-03
볼륨 가격
| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1 | $1.00 |
ℹ️ 모든 가격은 USD 기준입니다
TPS548B28RWWR 개요
The Texas Instruments TPS548B28 is a 2.7V to 16V input, 20A synchronous buck converter with differential remote sense, integrated MOSFETs, and a 3V internal LDO, supplied in a 21-pin PowerVFQFN (RWW) package. With an accurate ±1% 0.6V reference over the full operating junction temperature range, it delivers precise point-of-load regulation for high-current computing loads.
A synchronous buck converter is a DC-DC switching regulator that steps a higher input voltage down to a lower output voltage using two integrated switches (high-side and low-side MOSFETs) plus an external inductor. Within the power management hierarchy, the TPS548B28 belongs to the switching regulator family, positioned as a single-channel point-of-load (POL) solution between simple low-current bucks and multi-phase controllers.
Key features include a 4V to 16V input range supporting 20A continuous output without external bias, extended 2.7V operation with a 3.13V to 3.6V external bias, an output voltage range of 0.6V to 5.5V, and integrated 7.7-mΩ high-side and 2.4-mΩ low-side MOSFETs. The device offers fast load-transient response, accurate load and line regulation, Skip-mode or forced-CCM (FCCM) operation for light-load efficiency trade-offs, programmable soft start, and hiccup current limit for fault robustness.
The D-CAP3-style control architecture enables a small external component count and fast transient response with low output capacitance, well suited to space-constrained boards. The internal 3V LDO can be overridden by an external bias rail to improve efficiency at lower input voltages. Differential remote sense compensates for PCB IR drop, maintaining ±1% regulation at the load point.
Typical applications include server and storage point-of-load rails (DSP, FPGA, ASIC, and processor cores), datacenter and networking card power, and general industrial 20A-class low-voltage supplies. Reference design support is available via the TPS548B28EVM-023 evaluation module.
Design consideration: at 20A loads, minimize the SW-node copper area and optimize the input capacitor loop to control EMI; verify thermal performance since total MOSFET conduction plus switching losses concentrate in the small QFN footprint.
A synchronous buck converter is a DC-DC switching regulator that steps a higher input voltage down to a lower output voltage using two integrated switches (high-side and low-side MOSFETs) plus an external inductor. Within the power management hierarchy, the TPS548B28 belongs to the switching regulator family, positioned as a single-channel point-of-load (POL) solution between simple low-current bucks and multi-phase controllers.
Key features include a 4V to 16V input range supporting 20A continuous output without external bias, extended 2.7V operation with a 3.13V to 3.6V external bias, an output voltage range of 0.6V to 5.5V, and integrated 7.7-mΩ high-side and 2.4-mΩ low-side MOSFETs. The device offers fast load-transient response, accurate load and line regulation, Skip-mode or forced-CCM (FCCM) operation for light-load efficiency trade-offs, programmable soft start, and hiccup current limit for fault robustness.
The D-CAP3-style control architecture enables a small external component count and fast transient response with low output capacitance, well suited to space-constrained boards. The internal 3V LDO can be overridden by an external bias rail to improve efficiency at lower input voltages. Differential remote sense compensates for PCB IR drop, maintaining ±1% regulation at the load point.
Typical applications include server and storage point-of-load rails (DSP, FPGA, ASIC, and processor cores), datacenter and networking card power, and general industrial 20A-class low-voltage supplies. Reference design support is available via the TPS548B28EVM-023 evaluation module.
Design consideration: at 20A loads, minimize the SW-node copper area and optimize the input capacitor loop to control EMI; verify thermal performance since total MOSFET conduction plus switching losses concentrate in the small QFN footprint.
드롭인 대체품: TPS548B28RWWR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청TPS548B28RWWR 최대 정격 & 전기적 특성
| 토폴로지 | Synchronous Step-Down (Buck) Converter |
| Input Voltage Range (no external bias) | 4 V to 16 V |
| Input Voltage Range (with external bias) | 2.7 V to 16 V |
| External Bias Range | 3.13 V to 3.6 V |
| 최대 출력 전류 | 20 A |
| 출력 전압 범위 | 0.6 V to 5.5 V |
| 기준 전압 | 0.6 V ±1% over junction temperature |
| High-Side MOSFET RDS(on) | 7.7 mΩ |
| Low-Side MOSFET RDS(on) | 2.4 mΩ |
| Remote Sense | Differential remote sense |
| Light Load Mode | Skip-mode or FCCM (selectable) |
| 전류 제한 | Hiccup mode current limit |
| 소프트 스타트 | Programmable |
| Internal LDO | 3 V internal LDO |
| 패키지 | 21-PowerVFQFN (RWW) |
| 실장 유형 | Surface Mount |
TPS548B28RWWR 핀 구성
| 핀 20 | SW — Switch node - connects to output inductor; per TI E2E forum, SW sends PWM to the inductor which maintains steady output current |
| 핀 [DATA_NEEDED] | VIN — Input supply |
| 핀 [DATA_NEEDED] | GND — Ground |
| 핀 [DATA_NEEDED] | VOUT/SENSE — Differential remote sense inputs |
| 핀 [DATA_NEEDED] | BOOT — High-side gate drive bootstrap |
| 핀 [DATA_NEEDED] | EN — Enable |
| 핀 [DATA_NEEDED] | SS/VSEL — Soft start / mode configuration |
| 핀 [DATA_NEEDED] | BIAS/VDD — External bias input for internal LDO bypass |
일반적인 애플리케이션
TPS548B28RWWR 적합 용도: 3 애플리케이션s: 전력 관리, 모터 제어, LED 조명.
전력 관리
TPS548B28RWWR을(를) 사용한 전원 공급 회로의 스위칭 및 레귤레이션.
모터 제어
TPS548B28RWWR을(를) 사용한 DC/BLDC 모터 구동 및 제어.
LED 조명
TPS548B28RWWR을(를) 사용한 LED 스트링 및 어레이 구동.
이 제품에 대한 FAQ가 없습니다.
엔지니어링 참조 데이터: TPS548B28RWWR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
Choose the TPS548B28 when you need a complete 20A point-of-load buck in a single small package with remote sense for server, storage, or networking boards, and your input rail is 4V to 16V (or 2.7V-16V with external bias). Choose a controller plus discrete power stage such as the TPS53355 (30A, split-rail input) if you need more than 20A or parallel operation - the TPS548B28 does not support paralleling per TI. Choose multi-rail PMBus devices such as TPS53624 when sequencing and telemetry are required. For lower-current rails, simpler bucks like TPS54620 suffice. Verify hiccup-mode fault behavior matches your reliability requirements before finalizing.
주요 차별점
- Differential remote sense for ±1% load-point accuracy (vs TPS53622RSBT)
- Integrated 7.7 mΩ / 2.4 mΩ MOSFETs (vs TPS53355)
- Internal 3V LDO with external bias override (vs TPS548B28EVM-023 reference configuration)
설계 노트
Keep the input capacitor to VIN/GND loop as small as possible; the 20A pulsed currents in this loop dominate EMI. Per the TI datasheet layout section, place ceramic input capacitors directly at the VIN pins and use the PowerVFQFN thermal pad with a multi-layer via array to the ground plane for heat spreading.
Conduction losses are roughly I^2 x (RDSon_HS x D + RDSon_LS x (1-D)); with 7.7 mΩ and 2.4 mΩ MOSFETs, duty cycle strongly affects thermals. At 12V-to-1V, 20A designs, evaluate switching loss and consider Skip-mode only at light load, since FCCM improves transient response for processor cores.
Do not attempt to parallel multiple TPS548B28 outputs - per TI E2E forum, the device does not support paralleling; for higher current use a controller such as TPS53355. The 4V minimum input applies without external bias; below 4V, supply a 3.13V-3.6V bias to extend operation down to 2.7V.
규정 준수 정보
RoHS
Unknown
REACH
Unknown
AEC-Q100
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown
Compliance data not present in provided verified web data; check TI product page for RoHS/REACH status.
데이터 검증일: 2026-08-29
— XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터
관련 검색
TPS548B28 datasheet
TPS548B28RWWR price
TI TPS548B28 20A buck converter
2.7V to 16V input 20A synchronous buck regulator
21-PowerVFQFN buck converter
TPS548B28 server point of load power supply
TPS548B28 vs TPS53355
TPS548B28 drop-in replacement alternative
buy TPS548B28RWWR in stock
can TPS548B28 be used for parallel output
TPS548B28 pinout SW pin 20
20A POL regulator datacenter storage
관련 부품 & 용어
Texas Instruments
TPS548B28
TPS548B28RWWR
TPS548B28EVM-023
synchronous buck converter
DC-DC switching regulator
point-of-load (POL)
PowerVFQFN
QFN package family
differential remote sense
FCCM
Skip-mode
hiccup current limit
D-CAP3 control
TPS53355
TPS53624
TPS53622RSBT
RoHS
server power
datacenter power
관련 기술 가이드
TPS548B28RWWR: 20A 16V 동기식 벅 컨버터 — 완벽 선택 및 설계 가이드
TI의 TPS548B28RWWR: 2.7–16V 입력, ±1% 0.6V 기준 전압, 차동 원격 감지를 갖춘 20A 동기식 벅 컨버터, 21핀 QFN. 2026-09-04 기준 재고 보유.
5 분 소요
1 / 1