Texas Instruments

TUSB1106PWR USB 2.0 Transceiver | Texas Instruments

부품 번호: TUSB1106PWR ✓ 활성
16-pin TSSOP (PW) Package 12 Mbit/s Speed
MOQ: 1 |

TUSB1106PWR 개요

The Texas Instruments TUSB1106PWR is a single-channel USB transceiver for Universal Serial Bus applications, supporting full-speed operation at 12 Mbit/s and low-speed operation at 1.5 Mbit/s. The device is compliant with the Universal Serial Bus Specification Revision 2.0 and is packaged in a 16-pin TSSOP (PW) package. It integrates the digital transceiver functions required for a USB host, device, or peripheral interface.

A USB transceiver is an interface integrated circuit that converts between a host controller or peripheral controller’s digital signaling and the physical D+ and D- differential pair used by USB. In the broader electronics hierarchy, the TUSB1106 belongs to the USB interface IC family, interface transceivers, and power-management-aware connectivity semiconductors. It provides the physical-layer path for exchanging serial data and detecting bus state in USB 2.0 systems.

The TUSB1106 family supports both full-speed and low-speed USB data rates. Full-speed operation provides a higher-rate communication option for peripherals that require more throughput, while low-speed operation supports devices with modest bandwidth requirements and suitable device-state behavior. USB 2.0 Revision 2.0 compliance is specifically identified for the TUSB1105 and TUSB1106 transceivers by Texas Instruments.

The TUSB1106PWR is a half-duplex, one-channel transceiver, matching the “1/1 Transceiver Half” device description shown in the product listing. Its differential USB data interface connects to the external data and power behavior of the USB link, while control and configuration pins support integration into host or peripheral designs. The single USB channel makes the device appropriate for compact equipment, industrial control modules, embedded systems, and accessory interfaces that require one USB physical transceiver.

Typical design locations include USB host controllers, USB peripheral controllers, portable test equipment, industrial interface cards, and embedded USB-to-serial or USB communication subsystems. The device should be placed near the USB connector so that the high-speed differential traces remain short, continuous, and impedance controlled. Connector-side protection, proper D+ and D- routing, and compliance with the USB signal-integrity requirements are more important than adding unrelated circuit functions.

When designing a replacement circuit, verify the complete pin description, electrical limits, operating-temperature range, and USB compliance requirements against the manufacturer datasheet. The principal engineering trade-off is that this device supports USB 2.0 full-speed and low-speed signaling rather than USB high-speed operation at 480 Mbit/s. For new designs that require high-speed USB data rates, select a transceiver explicitly specified for that speed instead.

This page organizes the verified manufacturer and distributor information into an engineering-oriented view covering USB data rates, package format, application fit, comparison criteria, and practical design guidance. The package and interface hierarchy are emphasized so engineers can identify whether the TUSB1106PWR matches the intended USB physical-layer design.

드롭인 대체품: TUSB1106PWR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

TUSB1105PWR

✅ 드롭인
📦 16-pin TSSOP (PW)
Same USB 2.0 full-speed and low-speed data rates; exact pin-level and electrical differences are

📋 참조 대체품 (카탈로그에 없음)

TUSB1106PWR 사양

Device Type USB full-speed/low-speed transceiver
Number of Channels 1 channel
Transceiver Configuration Half-duplex, 1/1 transceiver
USB Standard Compliance Universal Serial Bus Specification Revision 2.0
Full-Speed Data Rate 12 Mbit/s
Low-Speed Data Rate 1.5 Mbit/s
Package Type 16-pin TSSOP (PW)
핀 수 16 pins
실장 유형 Surface mount

TUSB1106PWR 16-pin tssop (pw) 핀 구성 가이드

TUSB1106PWR(16-pin tssop (pw) 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

TUSB1106PWR의 16-pin tssop (pw) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TUSB1106PWR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TUSB1106PWR 적합 용도: 6 애플리케이션s: Embedded USB Peripheral Interface, Industrial Control Module, USB Test and Measurement Adapter, Portable Device Accessory, USB-to-Serial Bridge, Security and Access Controller.

🖥️

Embedded USB Peripheral Interface

The TUSB1106PWR fits an embedded peripheral that communicates through a USB full-speed or low-speed connection. Its 12 Mbit/s full-speed rate is suitable for command exchange, configuration transfer, firmware update, and moderate data streaming, while the 1.5 Mbit/s low-speed rate supports simpler device functions. Place the transceiver close to the USB connector, route D+ and D- as a controlled differential pair, and connect the device’s USB controller according to the manufacturer pin-description table. The main benefit is a dedicated single-channel physical layer in a 16-pin TSSOP package; the design must not be treated as a 480 Mbit/s high-speed solution.

🏭

Industrial Control Module

The TUSB1106PWR can provide the USB physical interface for an industrial control module that uses a host computer to configure equipment or exchange operating data. Full-speed operation at 12 Mbit/s offers more bandwidth than low speed, while USB Specification Revision 2.0 compatibility supports a broadly established device architecture. Keep the transceiver and connector region separated from noisy switching stages, use a continuous reference plane, and apply connector-side ESD protection. Because this is a one-channel transceiver, designs needing multiple simultaneous USB links should use additional devices or a multi-channel controller.

🔧

USB Test and Measurement Adapter

The TUSB1106PWR is appropriate for compact test adapters and instrumentation interfaces that exchange commands and sampled data over USB full speed. Its 12 Mbit/s maximum stated full-speed rate can support moderate control traffic and data transfer without requiring a high-speed transceiver. Place the device near the external connector to minimize trace length, maintain matched D+ and D- geometry, and decouple supply pins according to the manufacturer recommendations. The advantage is a dedicated half-duplex USB physical layer in a 16-pin TSSOP footprint; system throughput may also be limited by the connected controller and USB host.

📱

Portable Device Accessory

A portable electronic accessory can use the TUSB1106PWR for a full-speed USB connection to a computer or charger-compatible interface. The 16-pin TSSOP package is practical for compact single-port designs, and the device supports both 12 Mbit/s full-speed and 1.5 Mbit/s low-speed operation. Layout quality is critical: route D+ and D- over uninterrupted ground, keep connector and protection components close together, and avoid long stubs. The device does not perform USB power negotiation or battery charging, so those functions must be handled separately by the host-side system.

🔧

USB-to-Serial Bridge

The TUSB1106PWR can serve as the USB physical layer in a USB-to-serial bridge that exposes a serial interface to an embedded controller. Full-speed operation at 12 Mbit/s is suitable for configuration consoles, firmware transport, and moderate data-transfer functions. Position the transceiver at the USB connector edge, maintain impedance continuity for the differential pair, and isolate it from clocks, switching regulators, and high-current actuator drivers. Since the TUSB1106 handles one half-duplex USB channel rather than the serial protocol itself, the companion controller must implement the required bridge and data framing.

🎥

Security and Access Controller

The TUSB1106PWR can support a USB connection for an access-control or security peripheral that exchanges enrollment data, status, and audit information with a host. Its full-speed mode provides 12 Mbit/s while low-speed support allows lower-bandwidth device functions where appropriate. Keep the USB trace geometry compact and isolated from security-sensitive analog or sensing circuitry, and follow the manufacturer’s recommended decoupling and grounding arrangement. This device supplies only the USB transceiver function, so authentication, cryptographic processing, and secure storage must be implemented by dedicated system components.

What is the TUSB1106PWR?
The TUSB1106PWR is a Texas Instruments single-channel, half-duplex USB transceiver in a 16-pin TSSOP package. According to the TUSB1106 manufacturer product page, the TUSB1105 and TUSB1106 devices are compliant with the Universal Serial Bus Specification Revision 2.0 and support both full-speed and low-speed serial data rates. It is intended for USB host, device, or peripheral physical-layer designs that require one differential USB data channel.
What USB data rates does the TUSB1106PWR support?
The TUSB1106PWR supports full-speed USB signaling at 12 Mbit/s and low-speed USB signaling at 1.5 Mbit/s. Texas Instruments identifies these operating rates for the TUSB1105 and TUSB1106 transceiver family in its product-page description. The device is therefore suitable for USB 2.0 full-speed and low-speed peripherals, but it is not identified as a 480 Mbit/s USB high-speed transceiver.
Is the TUSB1106PWR USB 2.0 compliant?
Yes, the TUSB1106 family is compliant with the Universal Serial Bus Specification Revision 2.0. The manufacturer describes both the TUSB1105 and TUSB1106 as universal serial bus transceivers capable of transmitting and receiving at 12 Mbit/s full-speed and 1.5 Mbit/s low-speed rates. Compliance should still be assessed for the complete product, including its USB power, connector, signal-routing, and system-level implementation.
What package does the TUSB1106PWR use?
The TUSB1106PWR uses a 16-pin TSSOP package identified by the PW suffix. The Texas Instruments part-details listing describes the device as an advanced universal serial bus transceiver in a TSSOP (PW) package with 16 pins, while the distributor listing identifies it as a 16-TSSOP. Use the manufacturer pin-description table when assigning PCB nets and connector-side components.
Where can I download the TUSB1106PWR datasheet PDF?
The TUSB1106PWR datasheet and supporting technical information are available from the official Texas Instruments TUSB1106 product page at https://www.ti.com/product/TUSB1106. The part-specific ordering information is listed at https://www.ti.com/product/TUSB1106/part-details/TUSB1106PWR. These official pages provide the appropriate source for the electrical characteristics, pin description, operating limits, and package drawing.
Where is the TUSB1106PWR pinout located?
The TUSB1106PWR pinout is located in the pin-description section of the Texas Instruments TUSB1106 manufacturer datasheet. The device has 16 pins in a TSSOP (PW) package, with the physical pin numbering and terminal names shown on the package drawing. Assign the USB differential nets, control pins, supply pins, and ground pins by following that pin-description table rather than relying on a generic TSSOP diagram.
What is the difference between the TUSB1106 and TUSB1105?
The TUSB1106 and TUSB1105 are both Texas Instruments universal serial bus transceivers compliant with USB Specification Revision 2.0, and both support 12 Mbit/s full-speed and 1.5 Mbit/s low-speed data rates. Their exact functional differences must be confirmed from the manufacturer datasheet pin descriptions and device characteristics. The TUSB1106PWR should not be replaced solely because the family shares USB data rates; connector, control, supply, and pin-level requirements must also match.
Can the TUSB1105 replace the TUSB1106PWR?
The TUSB1105 is the closest same-family candidate identified for the TUSB1106PWR because both support USB Revision 2.0 full-speed and low-speed operation. It should be treated as a possible replacement only after confirming that the TUSB1105 package, pin assignment, control interface, electrical limits, and channel behavior match the existing PCB. The available comparison data does not establish complete pin-to-pin equivalence, so board-level verification is mandatory.
What is the best drop-in replacement for the TUSB1106PWR?
No fully verified drop-in replacement can be identified from the available cross-reference information. The TUSB1105 is a same-family possibility because both devices support USB Revision 2.0 at 12 Mbit/s and 1.5 Mbit/s, but the search results do not confirm identical 16-pin TSSOP pinout or every electrical parameter. Use the TI cross-reference search and compare the manufacturer pin tables before approving a replacement.
When should I choose the TUSB1106PWR over another USB transceiver?
Choose the TUSB1106PWR when the design requires a one-channel USB 2.0 transceiver operating at full speed or low speed and the 16-pin TSSOP footprint is appropriate. It is a practical choice for embedded peripherals, host interfaces, industrial controls, and test equipment that do not require USB high-speed operation. Choose another transceiver instead when 480 Mbit/s operation, a different package, or additional USB channels are mandatory.
Is the TUSB1106PWR suitable for a USB peripheral application?
Yes, the TUSB1106PWR is suitable for a USB peripheral or device interface operating at 12 Mbit/s full speed or 1.5 Mbit/s low speed. The single half-duplex transceiver provides the physical-layer path for differential USB data communication. Final suitability also depends on host-controller compatibility, connector implementation, bus-power requirements, ESD protection, and compliance of the complete USB design.
What design considerations matter for a TUSB1106PWR USB interface?
The most important consideration is controlled USB differential routing between the TUSB1106PWR and the connector. Keep D+ and D- traces short, closely coupled, continuously referenced to a solid ground plane, and routed without stubs or abrupt impedance discontinuities. Confirm supply capacitance, connector placement, ESD protection, and all pin assignments using the manufacturer datasheet. USB signal integrity is determined by the complete physical layer, not only by the transceiver itself.
Does the TUSB1106PWR support USB high-speed at 480 Mbit/s?
No, the stated operating rates for the TUSB1106 family are 12 Mbit/s full-speed and 1.5 Mbit/s low-speed. The manufacturer product page does not identify the TUSB1106 as a 480 Mbit/s USB high-speed transceiver. If a design requires high-speed USB, select an interface IC explicitly specified for USB high-speed operation and confirm its electrical, layout, and connector requirements.
Where can I buy the TUSB1106PWR and check its lead time?
The TUSB1106PWR can be requested through the Request a Quote form on this page, where the current commercial terms, stock position, and lead time can be confirmed for the exact 16-pin TSSOP ordering code. The available listings identify the part but do not provide qualifying quantity-break pricing, so no fixed price or lead-time claim should be inferred from a family-level listing.
What are the key specifications of the TUSB1106PWR that engineers should know?
The key TUSB1106PWR specifications are one half-duplex transceiver channel, 12 Mbit/s full-speed operation, 1.5 Mbit/s low-speed operation, USB Specification Revision 2.0 compliance, and a 16-pin TSSOP (PW) package. Texas Instruments identifies the device as an advanced universal serial bus transceiver. Supply limits, operating temperature, ESD rating, propagation delay, and detailed pin functions require confirmation in the manufacturer datasheet.
How do I choose between the TUSB1106PWR and a USB high-speed transceiver?
Choose the TUSB1106PWR when 12 Mbit/s full-speed or 1.5 Mbit/s low-speed USB communication is sufficient and the 16-pin TSSOP package matches the PCB. Choose a USB high-speed transceiver when the application must transfer data at rates up to 480 Mbit/s. The higher-rate device can require tighter layout, different supply handling, and different connector or routing rules, so the choice should follow system bandwidth requirements rather than package similarity.

엔지니어링 참조 데이터: TUSB1106PWR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TUSB1106PWR for a compact USB 2.0 interface that needs one half-duplex channel and can operate at 12 Mbit/s full speed or 1.5 Mbit/s low speed. Its 16-pin TSSOP package is suitable for embedded peripherals, industrial controls, test adapters, portable accessories, and simple bridge products. The TUSB1105PWR is the closest same-brand family candidate and matches the stated USB revision and data rates, but exact pinout and electrical compatibility must be confirmed before using it as a replacement. Do not choose either device for 480 Mbit/s USB high-speed designs. For multi-port systems, use a multi-channel USB interface solution instead of adding a single-channel transceiver. For designs requiring USB Type-C orientation, power-role negotiation, or charger detection, add the appropriate dedicated controller or port-management circuitry.

대체품과의 비교

파라미터 이 제품 TUSB1105PWR
Package 16-pin TSSOP (PW) 16-pin TSSOP (PW)
Brand Texas Instruments Texas Instruments
Device Type USB transceiver USB transceiver
Channel Count 1 channel 1 channel
USB Specification Universal Serial Bus Specification Revision 2.0 Universal Serial Bus Specification Revision 2.0
Full-Speed Data Rate 12 Mbit/s 12 Mbit/s
Low-Speed Data Rate 1.5 Mbit/s 1.5 Mbit/s

주요 차별점

  • Single-channel half-duplex USB interface (vs TUSB1105PWR)
  • USB Revision 2.0 full-speed operation (vs TUSB1105PWR)
  • Low-speed compatibility (vs TUSB1105PWR)

설계 노트

Route the USB D+ and D- conductors as a short, tightly coupled differential pair over a continuous ground plane. Keep the transceiver close to the USB connector, remove unnecessary stubs, and avoid changing layer stackups between the connector, protection components, and transceiver. USB signal integrity depends on the complete path, so confirm the implemented geometry with the layout rules and test limits appropriate for 12 Mbit/s operation.

Do not substitute this part for a USB high-speed transceiver: the stated maximum operating rate is 12 Mbit/s full speed, not 480 Mbit/s. Also verify the complete pin description and supply requirements against the manufacturer datasheet rather than treating the 16-pin TSSOP outline as sufficient proof of compatibility. A footprint match alone does not establish electrical, control, or protocol equivalence.

Place connector-side protection and any required series impedance components close to the USB connector and follow the manufacturer’s recommended placement around the transceiver. Provide local supply decoupling using the capacitance and layout specified in the datasheet. Maintain a low-impedance ground return beneath the differential pair and separate the USB routing region from switching nodes and high-current power paths.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

USB Specification Revision 2.0 compliance is stated by Texas Instruments for the TUSB1105 and TUSB1106 family. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not established by the available manufacturer and distributor information.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

TUSB1106PWR datasheet TUSB1106PWR pinout TUSB1106PWR datasheet pdf TUSB1106PWR equivalent TUSB1106PWR replacement TUSB1106PWR cross reference TUSB1106PWR vs TUSB1105PWR TUSB1106PWR footprint TUSB1106PWR price TUSB1106PWR stock Texas Instruments TUSB1106PWR TUSB1106 TSSOP 16 pin transceiver TUSB1106 USB full speed application What can replace TUSB1106PWR

관련 부품 & 용어

Texas Instruments TUSB1106PWR TUSB1105PWR USB transceiver Universal Serial Bus USB 2.0 Universal Serial Bus Specification Revision 2.0 full-speed USB low-speed USB half-duplex transceiver USB interface IC D+ differential pair D- differential pair 12 Mbit/s 1.5 Mbit/s TSSOP-16 PW package surface mount USB host USB device USB peripheral embedded system industrial control USB signal integrity ESD protection
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기