XC3S50-4VQ100C - 50K Spartan-3 FPGA | AMD | 100-TQFP
부품 번호: XC3S50-4VQ100C ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $24.95 | $24.95 |
| 10 | $21.4 | $214.00 |
| 100 | $17.85 | $1,785.00 |
| 500 | $15.2 | $7,600.00 |
| 1,000 | $13.65 | $13,650.00 |
XC3S50-4VQ100C 개요
A field-programmable gate array is a semiconductor whose logic fabric, programmable interconnect, and I/O blocks can be configured after manufacture. The XC3S50-4VQ100C belongs to the Spartan-3 FPGA family, combining configurable logic resources with dedicated digital input/output capability in a low-density package suitable for space-constrained designs.
The verified device information identifies 50,000 system gates, 1,728 logic cells, 63 I/O, and a maximum stated clock frequency of 630 MHz. The -4 suffix denotes the performance grade, while VQ100 identifies the 100-pin package. The core supply is listed as 1.2 V, with an operating supply range of 1.14 V to 1.26 V and a commercial junction-temperature range of 0°C to 85°C.
Unlike an application-specific integrated circuit, this FPGA permits configuration changes during development and production. That flexibility supports parallel data paths, state machines, protocol bridging, control logic, and small embedded processing systems. Its 100-pin TQFP package also exposes more general-purpose I/O than lower-density packages, although exact bank voltage, input threshold, and pin-specific capabilities require the official device documentation.
Typical applications include industrial control, telecommunications support logic, consumer electronics, and compact embedded systems. The 1.2 V core makes board-level power planning important: designers should provide stable, decoupled core rails and use compatible external I/O standards according to the selected bank configuration. Tool-chain, configuration-memory, and legacy-device considerations should also be reviewed before committing a new production design.
For an existing 100-TQFP Spartan-3 PCB, a replacement must be checked for exact speed grade, temperature grade, pin mapping, supply requirements, I/O standards, configuration interface, and programming-file compatibility. This page combines verified distributor specifications with practical selection, sourcing, and migration guidance rather than relying only on a catalog description.
드롭인 대체품: XC3S50-4VQ100C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC3S50-4VQ100C (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Logic Cells, Package, System Gates, Temperature Grade.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
XC3S50-4VQG100C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S50-4VQ100I
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →XC3S50-4VQG100I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S50-4VQ100C 최대 정격 & 전기적 특성
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-3 |
| System Gates | 50,000 gates |
| Logic Cells | 1,728 cells |
| Maximum Stated Frequency | 630 MHz |
| I/O Count | 63 I/O |
| Core Supply Voltage | 1.2 V |
| Operating Supply Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -4 |
| Temperature Grade | Commercial |
| 동작 접합 온도 범위 | 0°C to 85°C |
| 패키지 | 100-TQFP |
| Package Body Size | 14 mm x 14 mm |
| 실장 유형 | Surface Mount |
| Terminal Count | 100 pins |
| Process Technology | 90 nm |
| Lead-Free Status | Lead Free |
| RoHS 상태 | unknown |
| REACH Status | unknown |
XC3S50-4VQ100C 14 mm x 14 mm 핀 구성 가이드
XC3S50-4VQ100C(14 mm x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC3S50-4VQ100C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC3S50-4VQ100C 적합 용도: 6 애플리케이션s: Industrial Control and Automation Logic, Telecommunications Interface Logic, Consumer Electronics and Embedded Systems, Data Acquisition and Signal Conditioning, Networked Edge and Gateway Control, Instrumentation and Measurement Control.
Industrial Control and Automation Logic
The XC3S50-4VQ100C fits compact industrial-control logic where programmable state machines, parallel data handling, and dedicated I/O are more useful than a fixed application ASIC. Its verified 1,728 logic cells and 63 I/O provide capacity for sequencing, interlocks, signal conditioning interfaces, and communication-control functions. The 1.2 V core and 1.14 V to 1.26 V operating range require a stable supply with local decoupling. For deployments extending beyond the commercial 0°C to 85°C junction range, the industrial-temperature XC3S50-4VQ100I should be considered instead.
추천
Telecommunications Interface Logic
The XC3S50-4VQ100C is appropriate for telecommunications support logic that requires configurable framing, packet filtering, status tracking, and parallel-to-serial interface adaptation. Its 50,000-system-gate and 1,728-cell Spartan-3 implementation, together with 63 I/O, supports modest data-path concurrency without moving to a larger FPGA. The maximum stated frequency of 630 MHz provides substantial timing headroom, although actual system performance depends on routing, logic depth, and the selected clocking scheme. Board-level design must preserve the 1.14 V to 1.26 V core range and apply the required I/O standards per bank.
추천
Consumer Electronics and Embedded Systems
The XC3S50-4VQ100C can consolidate control, display, keypad, and peripheral-interface logic in a compact consumer-electronics design. Sixty-three I/O and 1,728 logic cells are sufficient for modest control planes, custom protocol conversion, LED or display sequencing, and sensor aggregation. Its 100-TQFP package supports conventional surface-mount assembly, while the -4 grade targets higher performance than the base Spartan-3 grade. Designers should confirm legacy programming-tool support, configuration-memory requirements, and whether an industrial-temperature alternative is needed before finalizing a long-life consumer product.
추천
Data Acquisition and Signal Conditioning
The XC3S50-4VQ100C is useful in small data-acquisition systems that coordinate sensor inputs, counters, digital filtering, timing, and control outputs. Its programmable fabric allows acquisition sequencing and data-path logic to be consolidated without a fixed-function controller, while 63 I/O provide connectivity for multiplexers, memory interfaces, and status signals. The 1.2 V core must be separated appropriately from any external analog or mixed-signal circuitry. Designers should use the official I/O bank rules, account for input thresholds and drive standards, and verify timing closure for sampling, triggering, or synchronization paths.
추천
Networked Edge and Gateway Control
The XC3S50-4VQ100C can implement a small gateway-control layer that supervises communication, manages local I/O, and bridges legacy peripheral formats. Its 1,728 logic cells are appropriate for bounded protocol handling, state machines, and supervisory functions rather than a complete network stack in software. Pairing it with a dedicated Ethernet interface concentrates the FPGA's role on deterministic control and data organization. The commercial 0°C to 85°C range may suit indoor equipment, but deployed temperature, power, and lifecycle requirements should drive the final grade and sourcing decision.
추천
Instrumentation and Measurement Control
The XC3S50-4VQ100C is suitable for instrumentation front ends that coordinate switches, calibration tables, status indicators, and data-transfer framing. The 100-TQFP package provides a manageable number of external connections, while the configurable logic permits revision-friendly changes to timing and control sequences. Its verified 630 MHz stated frequency is ample for many acquisition and supervisory paths, but the final implementation depends on actual timing closure. Use clean reference-ground partitioning, verify input thresholds for test signals, and confirm the configuration mechanism against the instrument's startup and service requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC3S50-4VQ100C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC3S50-4VQG100C | XC3S50-4VQ100I | XC3S50-4VQG100I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 100-VQFP | 100-VQFP - same | 100-VQFP - same | 100-VQFP - same |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| Speed Grade | -4 | -4 | -4 | -4 |
주요 차별점
- Closest ordering-code match with verified complete replacement (vs XC3S50-4VQG100C)
- Industrial-temperature option without changing the core device family (vs XC3S50-4VQ100I)
- Commercial-grade 1.2 V device for compact embedded control (vs XC3S100E-4VQG100I)
설계 노트
Design the core rail for the verified 1.2 V nominal supply and 1.14 V to 1.26 V operating range. Keep the regulator stable across startup and load transients, and place the required bypass capacitors close to the device's power and ground pins with short, low-impedance return paths. The supplied data does not specify recommended capacitor values or I/O bank voltages; obtain those values from the official datasheet rather than reusing values from another FPGA.
Confirm the exact 100-VQFP land pattern, pin-one orientation, and thermal-pad arrangement against the official package drawing. The verified body size is 14 mm by 14 mm, but package variants and exposed thermal features must not be inferred from that dimension alone. Preserve solder-mask and paste control around fine-pitch leads, and route clock, configuration, and high-fanout I/O nets away from sensitive analog or reference signals.
Do not treat identical package names as proof of interchangeable FPGA designs. Before replacing the XC3S50-4VQ100C, verify the speed suffix, commercial or industrial temperature grade, pin-to-pin signal functions, I/O standard limits, configuration pins, core and auxiliary voltage requirements, and bitstream compatibility. Legacy-device migration should also include an ISE-era synthesis and timing check so a nominal 630 MHz device figure is not mistaken for guaranteed design Fmax.
Assign clocks and fast external interfaces deliberately, and verify source-synchronous timing, loading, and I/O standards in the official device documentation. For interfaces to current-generation mixed-signal or network components, check voltage compatibility and direction at every crossing; a 1.2 V core specification does not define the external interface voltage. Where legacy LVCMOS or TTL interfacing is required, use level translation only after confirming direction, speed, and signal-integrity margins.
규정 준수 정보
The verified Digchip specification identifies the XC3S50-4VQ100C as lead-free. No explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was supplied, so those statuses remain unknown.
