XC5VLX110-2FFG676I - 110592-Cell 1V Virtex-5 LX FPGA | AMD
부품 번호: XC5VLX110-2FFG676I ✓ 활성XC5VLX110-2FFG676I 개요
A field-programmable gate array is a semiconductor device whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable I/O, memory resources, dedicated processing and clocking resources, and embedded hard processors where applicable. The resulting device can implement control logic, protocol interfaces, signal processing, embedded systems, and accelerator functions without requiring a custom ASIC mask set.
The XC5VLX110-2FFG676I provides 110,592 logic cells and 440 user I/O in a surface-mount 676-pin FCBGA package. Its 65 nm CMOS process and 1 V core voltage place it within the Virtex-5 LX architecture. Compared with smaller FPGAs, its 110,592-cell resource count supports substantially parallel architectures and broader interconnect demand. The 440 I/O provide external connectivity, although usable pin count depends on the selected I/O standard and device configuration.
The second digit after the device family identifies the -2 performance grade. Faster grade options trade power and cost for higher timing performance, so designers should use the speed grade appropriate to the system clock, I/O path, and thermal design. The FFG package is a fine-pitch flip-chip BGA, demanding careful PCB escape routing, multilayer construction, controlled-impedance routing, and assembly-process control. Its exposed thermal and power requirements also make thermal planning essential in high-utilization designs.
Typical uses include industrial control, networking equipment, test and measurement systems, high-speed data acquisition, embedded processing platforms, telecommunications infrastructure, and custom accelerator prototypes. The large logic-cell count is particularly useful when several parallel pipelines, protocol engines, or interfaces must operate concurrently. Systems requiring deterministic timing, broad parallel I/O, or field-updatable logic are stronger candidates than simple control applications that could use a smaller FPGA.
Design planning should begin with the Virtex-5 device documentation and the AMD package pinout files, then validate every power rail, configuration signal, clock, transceiver interface, and I/O standard against the selected board design. Because this is a large BGA device, power delivery, decoupling, via structures, solder mask, assembly profile, and thermal management can determine whether the FPGA achieves its intended performance. Configuration storage and boot behavior must also be reviewed before schematic sign-off.
This product page consolidates the identified device characteristics, package information, sourcing path, and practical design considerations into one engineering reference. It also distinguishes true same-footprint alternatives from package or speed variants that may require separate timing, power, and PCB validation before being considered for an upgrade or replacement.
드롭인 대체품: XC5VLX110-2FFG676I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC5VLX110-2FFG676I (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Temperature Grade, Package, Package Type, Speed Grade.
XC5VLX110-2FF676I
✅ 드롭인가격 문의
데이터시트 보기 →XC5VLX110-1FFG676I
✅ 드롭인가격 문의
데이터시트 보기 →XC5VLX110-1FF676C
✅ 드롭인가격 문의
데이터시트 보기 →XC5VLX110-3FF676C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC5VLX110-2FFG676I 최대 정격 & 전기적 특성
| Device Type | Virtex-5 LX field-programmable gate array (FPGA) |
| Logic Cells | 110,592 cells |
| User I/O | 440 I/O |
| Core Supply Voltage | 1 V |
| Process Technology | 65 nm CMOS |
| Speed Grade | -2 |
| Temperature Grade | Commercial |
| 패키지 | 676-pin FCBGA |
| Package Type | 676-BBGA, surface mount |
| 실장 유형 | Surface mount |
| Programmable Logic Type | SRAM-configured FPGA |
| Manufacturer | AMD |
| Original Product Family | Xilinx Virtex-5 LX |
| Number of Dedicated I/O | 440 I/O |
| Pinout Reference | AMD Virtex-5 package device pinout files |
XC5VLX110-2FFG676I 676-bbga, surface mount 핀 구성 가이드
XC5VLX110-2FFG676I(676-bbga, surface mount 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC5VLX110-2FFG676I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC5VLX110-2FFG676I 적합 용도: 6 애플리케이션s: Industrial Control and Automation, High-Speed Data Acquisition, Telecommunications Data Processing, Test and Measurement Systems, Network Packet Processing, Custom Accelerator Prototyping.
Industrial Control and Automation
The XC5VLX110-2FFG676I fits centralized industrial controllers that must combine machine sequencing, safety-adjacent monitoring, communications, and analog-interface conditioning. Its 110,592 logic cells allow multiple control domains and parallel datapaths to share one programmable device, while 440 I/O provide substantial connectivity to sensors, actuators, field buses, and operator panels. The -2 grade targets useful timing margin for demanding control logic, and the I suffix supports an industrial ordering configuration. A practical design should partition timing-critical control paths from communications, constrain each clock domain, and use the AMD timing analysis tools to verify every path against the production speed grade.
추천
High-Speed Data Acquisition
The XC5VLX110-2FFG676I is appropriate for parallel data-acquisition systems requiring many digital inputs, wide internal buses, and real-time processing. The 110,592 logic cells can support parallel ADC interface logic, digital filtering, packetization, and buffering without splitting the design across several devices. Its 440 user I/O help reduce routing pressure when multiple converters, clocks, triggers, and data-capture channels must connect directly. Designers should assign pins according to the official AMD package files, bank power requirements, and I/O standards rather than relying on a generic BGA symbol, then verify acquisition timing and channel skew through static timing analysis.
추천
Telecommunications Data Processing
The XC5VLX110-2FFG676I can support telecommunications equipment that requires parallel packet processing, protocol termination, buffering, and test instrumentation in a programmable logic device. Its large 110,592-cell resource count is useful for concurrent lanes and aggregation functions, while 440 I/O allow dense connectivity to lower-rate network interfaces and control processors. The -2 grade is suitable when the clocking plan requires more timing margin than the -1 option. Before layout release, engineers should calculate lane-specific input and output timing, confirm clock-capable pins, and reserve decoupling and power-distribution resources for the FPGA's multi-rail architecture.
추천
Test and Measurement Systems
The XC5VLX110-2FFG676I fits modular test and measurement instruments requiring extensive sequencing, timing control, data capture, and communication logic. The 110,592 logic cells allow acquisition, analysis, trigger, and interface functions to coexist, reducing inter-device synchronization compared with separate small FPGAs. With 440 user I/O, the device can connect instruments, memories, triggers, and processor buses through a configurable architecture. Designers should reserve deterministic clocking resources, apply synchronous design methods, and verify pin assignments and bus timing against the selected board schematic. AMD package and timing documentation should control all footprint and performance decisions.
추천
Network Packet Processing
The XC5VLX110-2FFG676I is suitable for network appliances that combine header parsing, classification, queue management, traffic statistics, and control-plane interfaces in parallel. Its 110,592 logic cells can support multiple concurrent packet paths while the 440 I/O provide access to external memories, management processors, status interfaces, and optional network ports. The -2 speed grade offers additional timing margin over the -1 option for constrained synchronous paths. A robust implementation should define clock-domain boundaries, apply appropriate I/O standards, account for package escape-routing delays, and run full static timing analysis under the expected operating conditions.
추천
Custom Accelerator Prototyping
The XC5VLX110-2FFG676I is useful for prototyping fixed-function accelerators because 110,592 logic cells can host parallel arithmetic pipelines, control state machines, data movement engines, and validation logic. The 440 I/O allow accelerator outputs to connect directly to DDR memory interfaces, DSP blocks, test equipment, or host processors during development. The programmable architecture makes timing and algorithm iteration possible without fabricating a custom ASIC. Engineers should use clock-enable gating, pipeline registers, and device utilization reports to keep timing closure practical, and should consult the Virtex-5 power documentation to estimate activity-dependent consumption before selecting regulators and cooling.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC5VLX110-2FFG676I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC5VLX110-2FF676I | XC5VLX110-1FFG676I | XC5VLX110-1FF676C | XC5VLX110-3FF676C |
|---|---|---|---|---|---|
| Package | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA | 676-BBGA, FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX |
| Logic Cells | 110,592 cells | 110,592 cells | 110,592 cells | 110,592 cells | 110,592 cells |
| User I/O | 440 I/O | 440 I/O | 440 I/O | 440 I/O | 440 I/O |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -2 | -2 | -1 | -1 | -3 |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Special Ordering Suffix | G676I | 676I without G | G676I with -1 speed grade | 676C without G | 676C without G |
주요 차별점
- Matches the required -2 performance class (vs XC5VLX110-1FF676C)
- Uses the industrial ordering suffix (vs XC5VLX110-3FF676C)
- Combines 110,592 logic cells with 440 I/O (vs XC4VLX60-11FFG668I)
설계 노트
Treat the XC5VLX110-2FFG676I power design as a multi-rail, high-current implementation. Use the Virtex-5 power-estimation and device documentation to determine worst-case demand for the 1 V core and auxiliary rails, including utilization, speed grade, and temperature effects. Place bulk and high-frequency decoupling close to the corresponding balls, provide low-impedance power planes, and validate regulator stability, sequencing, tolerance, and ripple before layout release.
The 676-pin FCBGA requires a multilayer PCB with a stack-up explicitly designed for escape routing, power integrity, and assembly. Use the exact AMD package drawing to define pad, solder-mask, paste, and via geometry; do not substitute a generic 676-BGA symbol. Consider via-in-pad or back-drilling techniques where return-path discontinuities or solder wicking could affect signal integrity or yield.
Estimate junction temperature from FPGA activity, speed grade, ambient conditions, and the PCB's effective thermal resistance rather than relying only on package dimensions. Preserve thermal-via access beneath the device where the package construction permits it, use an effective heat-spreader strategy when required, and verify the assembly process can maintain flatness and avoid package warpage. High-speed-grade substitutions require a new thermal assessment.
Do not approve a substitute solely because the MPN contains 110, 676, and the same family name. Confirm the exact package drawing, ball map, exposed connections, temperature classification, configuration interface, and timing grade. A -1, -2, or -3 grade change can alter timing and power, while commercial and industrial suffixes affect environmental requirements. Complete schematic, pinout, timing, power, and PCB review for every proposed substitution.
규정 준수 정보
Compliance declarations were not established for the exact MPN. The G package suffix must not be treated as proof of halogen-free status without the current AMD declaration of compliance. Automotive qualification is not indicated for this Virtex-5 device and is treated as not applicable.