XC7A100T-2FGG676C - 28nm 101440-Cell Artix-7 FPGA | AMD
부품 번호: XC7A100T-2FGG676C ✓ 활성XC7A100T-2FGG676C 개요
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after manufacture. FPGAs occupy the FPGA and CPLD segment of the programmable-logic hierarchy. Unlike fixed-function application-specific integrated circuits, an FPGA supports design changes, parallel processing, custom interfaces, and hardware acceleration while retaining a reusable hardware platform. The Artix-7 family is positioned for compact, cost-conscious embedded systems, industrial equipment, communications, and signal-processing designs.
The XC7A100T-2FGG676C provides 101,440 programmable logic cells and 4,976,640 configuration bits in a 676-ball BGA package. Its 300 I/O provide extensive board-level connectivity, while the 28 nm process and -2 speed designation identify its performance grade. The ordering code also identifies the commercial temperature class through the final C suffix. These characteristics make the device suitable for designs requiring substantial parallel logic without moving to a larger FPGA family.
Artix-7 devices integrate programmable logic with dedicated hardware for memory-intensive and arithmetic workloads. Depending on the selected device and package resources, block RAM can support packet buffers, data acquisition, and display interfaces, while DSP resources accelerate filtering, transforms, and fixed-point signal processing. Integrated clock-management and high-speed serial capabilities support designs in which clocking, transceiver operation, and deterministic data movement must coexist within one compact device.
Typical uses include industrial control modules, sensor aggregation, network-interface equipment, video-data pipelines, laboratory instruments, and embedded communications systems. The large I/O count is especially useful when a design must bridge multiple buses, retain parallel interfaces, or connect directly to external memory. Compared with a smaller Artix-7 device in a 484-ball package, the 676-ball option provides more connectivity and board area for demanding systems.
Design the PCB with the package pinout, power rails, decoupling network, and configuration interface taken directly from the AMD Artix-7 documentation. A 676-ball BGA requires careful fanout, multilayer routing, assembly-process planning, and thorough continuity testing. Confirm that the selected configuration memory, clock source, transceiver support, and auxiliary-device connections match the resources assigned in the FPGA design.
This product page combines the exact XC7A100T-2FGG676C ordering data, package and resource information, compatible Artix-7 alternatives, and practical replacement-selection guidance. It is designed to help engineers distinguish speed-grade, temperature-grade, density, and package differences before committing to an FPGA for a new PCB revision.
드롭인 대체품: XC7A100T-2FGG676C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7A100T-2FGG676C (동일 폼 팩터 및 풋프린트) — 차이점: Package, Process Technology, Logic Cells, Device Type, Mounting Type.
XC7A100T-2FGG676CES9937
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7A100T-1FGG676C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7A100T-1FGG676I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7A200T-2FBG676C
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$550 / 개
데이터시트 보기 →XC7A75T-2FGG676C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC7A100T-2FGG676C 최대 정격 & 전기적 특성
| Device Family | Artix-7 |
| Device Type | Field-Programmable Gate Array (FPGA) |
| Logic Cell Count | 101,440 cells |
| Configuration Memory | 4,976,640 bits |
| I/O Count | 300 I/O |
| Process Technology | 28 nm |
| 공급 전압 | 1 V |
| 패키지 | 676-ball BGA |
| Package Designation | FGG676 |
| Speed Grade | -2 |
| Temperature Grade | Commercial grade (C suffix) |
| 실장 유형 | Surface mount |
XC7A100T-2FGG676C fgg676 핀 구성 가이드
XC7A100T-2FGG676C(fgg676 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7A100T-2FGG676C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7A100T-2FGG676C 적합 용도: 6 애플리케이션s: Industrial Control Systems, Sensor Aggregation and Data Acquisition, Communications and Network Interfaces, Video and Image Data Pipelines, Laboratory and Test Equipment, Embedded Signal Processing.
Industrial Control Systems
The AMD XC7A100T-2FGG676C fits industrial controllers that coordinate sensors, actuators, motion interfaces, and supervisory logic in a compact programmable platform. Its 101,440 logic cells allow parallel control tasks and diagnostic sequencing, while approximately 300 I/O provide substantial connectivity for encoder channels, digital I/O, communications, and status indicators. The -2 speed grade supports designs with demanding clock periods, and the commercial C suffix is appropriate when the controller's specified ambient and enclosure temperatures remain within commercial limits. Engineers should partition the design into deterministic control, communications, and fault-handling domains, then verify each path against the Artix-7 timing constraints before implementation.
추천
Sensor Aggregation and Data Acquisition
The XC7A100T-2FGG676C is useful for sensor hubs that must align, filter, count, and route data from many parallel channels. With 101,440 logic cells, 4,976,640 configuration bits, and approximately 300 I/O, the device can combine acquisition control, timestamp handling, digital filtering, and data formatting without external logic devices. The 676-ball BGA also exposes more interface options than smaller Artix-7 packages. A practical implementation should establish separate clock domains for sensor sampling and data transfer, use the package pinout to assign banks correctly, and confirm that the selected I/O standard, voltage, and timing requirements are supported in the chosen bank configuration.
추천
Communications and Network Interfaces
The AMD XC7A100T-2FGG676C can implement protocol conversion, packet processing, test instrumentation, and custom communication interfaces when a fixed-function device would be too restrictive. Its 101,440-cell Artix-7 architecture can support parallel packet processing, while approximately 300 I/O allow dedicated status, reference-clock, and serial-interface connections. The -2 grade is appropriate for higher clock-rate pipelines, although final throughput remains design-dependent. Engineers should review Artix-7 transceiver and I/O resources for the selected package, define clocking and reset architecture carefully, and re-run static timing analysis whenever the device speed grade or FPGA configuration changes.
추천
Video and Image Data Pipelines
The XC7A100T-2FGG676C supports parallel video pipelines, frame preprocessing, pixel-format conversion, test-pattern generation, and interface bridging where deterministic logic and high I/O availability are important. Approximately 300 I/O provide access to multiple data buses, while the 101,440-cell device supplies parallel processing resources for timing correction, color conversion, and overlay functions. Because the 676-ball BGA requires multilayer routing and careful escape paths, the PCB should use the AMD package files for every ball assignment. Validate video clocking, lane-to-bank mapping, and timing closure under the selected resolution and refresh rate rather than relying only on generic device capacity.
추천
Laboratory and Test Equipment
The AMD XC7A100T-2FGG676C is well suited to programmable test systems that combine pattern generation, timing control, data capture, and analysis logic in one device. Its 101,440 logic cells can host multiple concurrent channels, and approximately 300 I/O simplify connections to converters, memory, trigger logic, and host interfaces. The -2 speed grade can improve timing headroom in acquisition and sequencing paths. Designers should use synchronous design practices, define clock-domain-crossing behavior explicitly, and include built-in test access for board diagnostics. Before production, verify that the selected configuration meets timing and I/O constraints across the full commercial temperature range specified for the XC7A100T-2FGG676C.
추천
Embedded Signal Processing
The XC7A100T-2FGG676C can implement filtering, correlation, waveform analysis, and fixed-point arithmetic pipelines where parallel throughput is valuable. The Artix-7 architecture combines programmable logic with dedicated resources that can be assigned to memory-intensive or arithmetic-heavy functions after implementation. With approximately 300 I/O, the device can connect directly to high-rate converters and parallel memory interfaces while retaining control logic for calibration. The -2 grade offers additional timing margin relative to a -1 selection, but the actual sample rate must be established through constraint-based timing analysis. Confirm memory-interface capabilities and selected I/O standards in the package-specific AMD documentation before freezing the architecture.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7A100T-2FGG676C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7A100T-2FGG676I | XC7A100T-2FGG676CES9937 | XC7A100T-1FGG676C | XC7A100T-1FGG676I | XC7A200T-2FBG676C | XC7A75T-2FGG676C |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2 | -2 | -2 | -1 | -1 | -2 | -2 |
| Temperature Grade | Commercial (C) | Industrial (I) | Commercial (C) | Commercial (C) | Industrial (I) | Commercial (C) | Commercial (C) |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
주요 차별점
- Closest temperature-grade substitution (vs XC7A100T-2FGG676I)
- Same resource and speed grades with an extended ordering suffix (vs XC7A100T-2FGG676CES9937)
- Higher performance grade than the -1 alternatives (vs XC7A100T-1FGG676C)
- Lower density than the larger compatible Artix-7 option (vs XC7A200T-2FBG676C)
설계 노트
Use the AMD Artix-7 package-device pinout file as the board-layout authority for every FGG676 ball. A 676-ball BGA generally requires multilayer construction, short escape routes, and controlled impedance for high-speed signals. Separate power and ground planes, place decoupling according to the manufacturer power-guidance document, and reserve manufacturing access for X-ray or equivalent assembly inspection. Do not assign pins from an unrelated Artix-7 package because ball numbering and dedicated functions are package-specific.
Plan the complete power tree before placing the FPGA. The core operates from a nominal 1 V supply, while auxiliary and I/O rails must be generated and sequenced according to the device documentation. Keep high-current return paths within the BGA power-ball structure, place local bulk and high-frequency decoupling at the supply-entry points, and verify voltage tolerances against the selected I/O standards. Add test access for each rail so board bring-up can detect sequencing or decoupling faults without rework.
Do not substitute a different speed or temperature suffix without reviewing the engineering consequences. Moving from -2 to -1 can invalidate timing margins even when the package and logic density match, while moving from commercial C to industrial I changes environmental qualification. For any replacement, regenerate or confirm the bitstream, rerun static timing analysis, verify configuration behavior, and compare every power rail, I/O standard, and package assignment against the original design.
Assign clocks, high-speed serial interfaces, and sensitive parallel buses to appropriate I/O banks before PCB routing. Match trace lengths and impedances to the selected interface requirements, minimize stubs, and keep return paths continuous through the BGA escape region. Check source-synchronous and chip-to-chip timing against the selected speed grade. Because package density complicates probing, consider test points, boundary-scan access, and manufacturing scan coverage in the board plan.
규정 준수 정보
The comparison sources refer to RoHS and REACH status, but the verified excerpts do not state the actual compliance results. AEC-Q100 is not applicable to this general-purpose commercial FPGA ordering code.