XC7A200T-3FBG484E - 215,360 Logic Cell Artix-7 FPGA | AMD
부품 번호: XC7A200T-3FBG484E ✓ 활성XC7A200T-3FBG484E 개요
An FPGA is a semiconductor whose digital behavior is configured after manufacture. The XC7A200T belongs to the Artix-7 product family, which is positioned between low-cost programmable logic and larger devices requiring greater connectivity or processing performance. Its 215,360 logic cells provide substantial parallel processing capacity, while the 285 I/Os support interfaces to external memory, converters, sensors, displays, and communications equipment.
Key device characteristics include 33,650 adaptive logic modules, 12.83 Mbit of embedded memory, 285 I/Os, a 1,412 MHz maximum clock frequency, and 0.94 ns combinatorial delay. The FBG484 package provides 484 ball positions and is intended for compact, high-density PCB layouts. The device also supports integrated high-speed serial transceivers and clock-management resources for demanding communication and signal-processing designs.
The -3 suffix identifies the device's performance grade, while the E suffix identifies the commercial temperature option. This distinction matters when comparing it with faster -1 or -2 grade devices and lower-power Artix-7 variants. Because an FPGA design depends on timing closure, the selected speed grade, system clocking, I/O standards, power configuration, and PCB signal integrity must all be reviewed together.
Typical applications include industrial control and automation, high-throughput signal processing, network-interface equipment, instrumentation, embedded vision, communications infrastructure, and cost-sensitive designs requiring more parallelism than a microcontroller or fixed-function ASIC can provide. Parallel pipelines can process multiple data streams concurrently, while programmable logic allows product revisions without changing the PCB.
A successful implementation requires careful BGA layout, power-plane design, decoupling, clock routing, and I/O-standard planning. Use the AMD Artix-7 package pinout files and UG475 when assigning every ball, and validate the board-level power integrity and signal integrity for the selected interface standards before fabrication.
This product page consolidates the confirmed device identity, package and performance details, replacement options, comparison parameters, and practical implementation guidance into an engineering-oriented reference for evaluating an FPGA design before schematic capture and PCB layout.
드롭인 대체품: XC7A200T-3FBG484E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7A200T-3FBG484E (동일 폼 팩터 및 풋프린트) — 차이점: Package, Logic Cells, Operating Temperature, Process Technology, Speed Grade.
XC7A200T-L2FBV484E
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7A200T-2FBG484I
✅ 드롭인✓ 재고 있음
$89.15 / 개
데이터시트 보기 →XC7A200T-1FBG484C
✅ 드롭인가격 문의
데이터시트 보기 →XC7A200T-1FBG484I
✅ 드롭인✓ 재고 있음
$38.5 / 개
데이터시트 보기 →XC7A200T-2FBG484E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7A200T-3FBG484I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7A200T-3FBG484E 최대 정격 & 전기적 특성
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| Logic Cells | 215,360 logic cells |
| Adaptive Logic Modules | 33,650 ALMs |
| Embedded Memory | 12.83 Mbit |
| Input/Output Count | 285 I/Os |
| 최대 클록 주파수 | 1,412 MHz |
| Combinatorial Delay | 0.94 ns |
| 패키지 | 484-ball FCBGA, FBG484 |
| Ball Count | 484 balls |
| Process Technology | 28 nm |
| Performance Grade | -3 speed grade |
| Temperature Option | E commercial temperature option |
| Product Family | Artix-7 |
| Device Category | FPGA and CPLD |
| Integrated Transceivers | Artix-7 high-speed serial transceiver capability |
| Clock Management | Integrated MMCM and PLL resources |
| 실장 유형 | Surface mount |
XC7A200T-3FBG484E 484-ball fcbga, fbg484 핀 구성 가이드
XC7A200T-3FBG484E(484-ball fcbga, fbg484 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7A200T-3FBG484E.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7A200T-3FBG484E 적합 용도: 6 애플리케이션s: Industrial Control and Automation, High-Throughput Signal Processing, Communications and Network Interface Equipment, Precision Instrumentation and Test Equipment, Embedded Vision and Image Processing, Aerospace and Defense-Style Adaptive Systems.
Industrial Control and Automation
The XC7A200T-3FBG484E fits industrial controllers that combine deterministic parallel logic with numerous peripheral interfaces. Its 215,360 logic cells can implement multiple control loops, protocol engines, and diagnostic paths in parallel, while 285 I/Os provide connectivity for sensors, actuators, encoders, isolation components, and digital I/O. The listed 1,412 MHz clock capability supports demanding pipelines when timing closure is achieved. In a motor-control or factory-control design, programmable hardware can accelerate sampling, filtering, and communication while leaving supervisory functions to a companion processor.
추천
High-Throughput Signal Processing
The XC7A200T-3FBG484E is well suited to parallel filtering, FFT, correlation, and data-classification pipelines because its 215,360 logic cells and DSP resources can process multiple channels concurrently. The stated 1,412 MHz maximum clock frequency provides ample timing headroom for deeply pipelined implementations, while 12.83 Mbit of embedded memory supports buffering between acquisition and processing stages. A practical advantage over a sequential processor is deterministic dataflow: samples can be streamed through fixed-latency pipelines without allocating the entire capture to external memory.
추천
Communications and Network Interface Equipment
The XC7A200T-3FBG484E can serve as the programmable datapath in packet-processing, protocol-conversion, and line-card equipment. Its 285 I/Os support parallel interfaces and control signals, while the Artix-7 transceiver capability enables high-speed serial links when the required I/O resources are assigned correctly. The 215,360-cell fabric allows header parsing, classification, queueing, and traffic shaping to run concurrently. For new designs, reserve serial transceiver pins and clocking resources early, because their placement and power requirements can constrain the board architecture.
추천
Precision Instrumentation and Test Equipment
The XC7A200T-3FBG484E is appropriate for instrumentation requiring simultaneous acquisition, calibration, digital signal processing, and low-latency control. Its 12.83 Mbit of embedded memory can hold working sets and coefficient tables, while the programmable fabric can implement parallel measurement channels with repeatable timing. The 285 I/Os allow connection to ADCs, DACs, reference clocks, trigger systems, and status displays. For highest-resolution acquisition paths, use the device timing tools to establish input constraints and verify edge-to-edge relationships before hardware is fabricated.
추천
Embedded Vision and Image Processing
The XC7A200T-3FBG484E can accelerate image filtering, thresholding, feature extraction, and sensor-format conversion in embedded vision systems. A 215,360-cell fabric provides enough parallelism to operate several image pipelines, and the 12.83 Mbit of embedded memory can buffer lines or intermediate results close to the processing logic. Its 285 I/Os support camera sensors, FPGA-to-processor links, and external memory interfaces. Partition the design carefully between logic, block RAM, and DSP resources so high-bandwidth image paths do not become the bottleneck.
추천
Aerospace and Defense-Style Adaptive Systems
The XC7A200T-3FBG484E can support adaptive control, simulation, monitoring, and communication functions where field-programmable logic offers flexibility beyond a fixed ASIC. The Artix-7 architecture provides 215,360 logic cells, integrated MMCM and PLL resources, and programmable 285 I/Os for avionics buses, sensors, and data concentrators. The E suffix denotes a commercial temperature option, so it should not be assumed to satisfy an extended-temperature or radiation-qualified requirement. For flight or rugged deployments, select the appropriate device grade and perform environmental, reliability, and radiation assessments independently.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7A200T-3FBG484E — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7A200T-L2FBV484E | XC7A200T-2FBG484I | XC7A200T-1FBG484C | XC7A200T-1FBG484I | XC7A200T-2FBG484E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-ball FCBGA, FBG484 | 484-ball FCBGA, FBG484 | 484-ball FCBGA, FBG484 | 484-ball FCBGA, FBG484 | 484-ball FCBGA, FBG484 | 484-ball FCBGA, FBG484 |
| Product Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 215,360 logic cells | 215,360 logic cells | 215,360 logic cells | 215,360 logic cells | 215,360 logic cells | 215,360 logic cells |
| Performance and Temperature Suffix | -3FBG484E | -L2FBV484E | -2FBG484I | -1FBG484C | -1FBG484I | -2FBG484E |
주요 차별점
- Substantial parallel processing capacity in a single Artix-7 device (vs XC7A200T-L2FBV484E)
- Documented logic, memory, and ALM continuity across speed grades (vs XC7A200T-1FBG484I)
- Same-package migration path with two faster grade options (vs XC7A200T-2FBG484I)
- High I/O count relative to the package size (vs XC7A200T-1FBG484C)
설계 노트
Generate the FBG484 footprint and ball assignments from AMD's Artix-7 package pinout files rather than treating the device as a generic 484-ball BGA. Power, ground, configuration, clock, and user I/O balls must follow the device-specific pin descriptions. Use a multilayer PCB with short return paths, a solid ground reference plane, and an escape strategy suitable for the selected BGA pitch. Cross-check every schematic symbol pin against the manufacturer package file before fabrication.
Estimated power depends on utilized logic, I/O activity, clock rates, configuration state, voltage, and temperature, so it must be calculated for the actual design. Use Vivado power estimation and the Artix-7 power-and-thermal guidance, then size the power rails and decouplers for the estimated worst case. Place the required bulk and high-frequency capacitors close to their associated supply balls and preserve the ground reference under every BGA row. Validate the final rail tolerance and startup sequence on hardware.
The 1,412 MHz listed device clock does not imply that every design path can run at that rate; actual performance depends on placement, routing, I/O standards, clock quality, and timing constraints. Constrain input clocks and I/O timing in Vivado, use the clock-management resources correctly, and analyze high-speed serial and parallel interfaces with the target board stack-up. For 484-ball escape routing, minimize stubs and discontinuities and verify crosstalk, return loss, and lane skew after layout.
Estimated junction temperature is the sum of ambient temperature, package-related rise, and the rise caused by power dissipation; exact values depend on the device grade, airflow, PCB copper, and the populated area. Use the manufacturer's power estimator to identify hot logic, then distribute high-utilization regions across the device rather than concentrating them in one region. Provide thermal vias and copper spreading around the BGA, and verify the production enclosure under worst-case ambient temperature and airflow conditions.
Do not treat an Artix-7 FPGA as a pin-compatible replacement for another FPGA family merely because both use a 484-ball package. Configuration pins, power rails, memory interfaces, transceiver assignments, and I/O standards can differ even when the package ball count matches. For a same-family suffix change, verify the package pinout, regenerate the bitstream, repeat timing and power analysis, and perform a hardware configuration and interface test before releasing production hardware.
규정 준수 정보
The Artix-7 family is described as a 28 nm FPGA family, but the exact device's RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present. The E suffix is a temperature option and does not by itself establish AEC-Q100 qualification.