AMD

XC7K355T-1FFG901C - 28nm Kintex-7 FPGA | AMD

부품 번호: XC7K355T-1FFG901C ✓ 활성
0.97 V to 1.03 V Vdss 900-ball FCBGA (FFG901) Package -1 Speed
MOQ: 1 |

XC7K355T-1FFG901C 개요

The AMD XC7K355T-1FFG901C is a Kintex-7 field-programmable gate array fabricated on a 28 nm process and supplied in a 900-ball FCBGA package. The device provides 356,160 logic cells, 300 user I/O, and a 1 V-class core supply with a documented configuration range of 0.97 V to 1.03 V. The -1 suffix identifies the device speed grade, while FFG901 denotes its 900-ball package and C identifies the commercial temperature option.

A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA and CPLD devices are reconfigurable digital semiconductors used to implement parallel processing, data acquisition, protocol bridging, signal processing, and control logic. Unlike fixed-function application-specific integrated circuits, an FPGA allows its interconnect, logic, memory, and digital signal processing resources to be configured after manufacture. This makes the XC7K355T suitable for designs requiring parallel channels, high throughput, deterministic interfaces, or field-updatable behavior.

The XC7K355T combines programmable logic with dedicated memory and DSP resources. The Kintex-7 family provides 25,740 Kb of block RAM for the 355T device and 300 I/O in the FFG901 configuration, while the 356,160-cell resource count supports substantial data-path and control parallelism. The -1 speed grade provides a defined balance between performance and power relative to the faster -2 grade, making it suitable for high-throughput processing where the absolute performance of -2 is unnecessary.

The device can implement multi-gigabit interfaces, digital signal-processing chains, high-speed memory or network interfaces, embedded control, and test-and-measurement logic. Its 900-ball package provides extensive connection capacity but demands careful PCB layout, power delivery, thermal management, and BGA assembly expertise. Configuration and programming must follow the Kintex-7 architecture and package-specific pinout resources rather than general-purpose assumptions.

Typical applications include high-speed network interfaces, test and measurement equipment, industrial imaging, radar and signal processing, communications infrastructure, and accelerator prototyping. In each case, designers should allocate logic, block RAM, DSP slices, clocking resources, and I/O according to the actual timing and utilization report rather than treating the total logic-cell count as directly usable application performance.

A key design consideration is the FCBGA power and escape-routing network. Follow the AMD package pinout files and the Kintex-7 PCB design guidance for ball assignment, decoupling, voltage sequencing, thermal vias, and high-speed routing. A 900-ball package also requires assembly processes capable of fine-pitch BGA inspection and reliable X-ray or equivalent quality verification.

This product summary combines the exact package and resource identifiers with practical guidance for FPGA selection, PCB implementation, thermal design, and drop-in sourcing. The comparison table and alternative list distinguish speed-grade and temperature-grade choices that preserve the FF901 footprint from options that require a different package or offer only general functional similarity.

드롭인 대체품: XC7K355T-1FFG901C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC7K355T-1FFG901C (동일 폼 팩터 및 풋프린트) — 차이점: Package, Mounting Type, Process Technology, Speed Grade.

AMD
Package: 901-pin FCBGA (FFG901)
Mounting Type: SMD
Process Technology: 28 nm CMOS
비교 대상: XC7K355T-1FFG901C →
AMD
Package: 900-BBGA, FCBGA
Mounting Type: SMD
비교 대상: XC7K355T-1FFG901C →

XC7K355T-2FFG901C

✅ 드롭인
AMD
📦 900-ball FCBGA (FFG901)
Kintex-7 field-programmable gate array (FPGA) · 356,160 cells · 27,825 CLBs · 55,650 ALMs · 26,357,760 bits · 300 I/O · 1,286 MHz · 28 nm CMOS

가격 문의

데이터시트 보기 →

XC7K355T-1FFG901I

✅ 드롭인
📦 900-ball FCBGA (FFG901)
호환 사양

가격 문의

XC7K355T-1FFG901E

✅ 드롭인 ⚠️ 사양 미검증
📦 900-ball FCBGA (FFG901)
Same Kintex-7 355T architecture, -1 speed grade, and 901-ball footprint; E denotes the extended-temperature ordering option.

📋 참조 대체품 (카탈로그에 없음)

XC7K355T-2FFG901I

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 900-ball FCBGA (FFG901)
Kintex-7 · 356160 · 27825 · 26357760 · 300 · 0.97 V ~ 1.03 V · -40°C ~ 100°C (TJ) · 900-BBGA, FCBGA

가격 문의

데이터시트 보기 →

XC7K355T-1FFG901I

✅ 드롭인 ⚠️ 사양 미검증
📦 900-ball FCBGA (FFG901)
호환 사양

가격 문의

XC7K355T-1FFG901C 최대 정격 & 전기적 특성

Device Type Kintex-7 field-programmable gate array (FPGA)
Manufacturer AMD / Xilinx
Logic Cell Count 356,160 cells
Block RAM 25,740 Kb
User I/O 300 I/O
Process Technology 28 nm
Core Voltage Range 0.97 V to 1.03 V
Speed Grade -1
Temperature Grade Commercial
패키지 900-ball FCBGA (FFG901)
Package Type FCBGA / BBGA
실장 유형 Surface mount
Minimum Operating Temperature -40 °C
Maximum Operating Temperature 100 °C
Programmability SRAM-configured programmable logic
Family Kintex-7

XC7K355T-1FFG901C fcbga / bbga 핀 구성 가이드

XC7K355T-1FFG901C(fcbga / bbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC7K355T-1FFG901C의 fcbga / bbga 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC7K355T-1FFG901C.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC7K355T-1FFG901C 적합 용도: 6 애플리케이션s: High-Speed Data Acquisition, Industrial Imaging and Vision, Radar and Digital Signal Processing, Network and Communications Equipment, Test and Measurement Systems, Communications and Industrial Control.

📺

High-Speed Data Acquisition

The XC7K355T-1FFG901C fits parallel acquisition systems that require deterministic sampling, wide data paths, and configurable real-time processing. Its 356,160 logic cells support channel control, trigger logic, and digital correction, while 25,740 Kb of block RAM supports buffering and parallel channel alignment. The 300 available user I/O can accommodate multiple data buses when the selected I/O standards and timing permit. Designers should use the -1 grade only after confirming timing closure, because sampling throughput can also depend on package escape delays, PCB channel skew, memory interfaces, and clock-jitter performance.

📷

Industrial Imaging and Vision

The XC7K355T-1FFG901C is appropriate for industrial imaging systems that combine parallel pixel capture, real-time image processing, and programmable control. Logic resources can implement parallel filters and pixel-format conversion, while block RAM provides line buffers and multi-pipeline storage. Its 300 I/O support camera interfaces, trigger signals, and external memory or processing links when electrical standards are compatible. For machine-vision deployments, use the commercial-temperature option only within its documented -40 °C to 100 °C range and verify that the camera interface timing, clocking architecture, and PCB signal integrity remain practical in the installed enclosure.

✈️

Radar and Digital Signal Processing

The XC7K355T-1FFG901C supports parallel radar and digital signal-processing functions where multiple independent channels must be filtered, transformed, or correlated in real time. Its large logic-cell count allows time-domain processing, while dedicated block RAM stores coefficients, intermediate vectors, and circular buffers. The -1 speed grade can provide a reasonable performance and power balance when the required clock rates and pipeline latency fit its timing limits. Exact DSP resources, transceiver availability, and timing constraints must be checked in the design tools because total logic cells alone do not establish radar-channel throughput or processing latency.

🌐

Network and Communications Equipment

The XC7K355T-1FFG901C is suitable for network interface, packet-processing, and protocol-conversion equipment requiring programmable throughput and high pin availability. Its 356,160 logic cells can host multiple packet paths, buffering control, and traffic-management functions, while 25,740 Kb of block RAM accommodates queues and payload processing. The FFG901 package provides ample connections for parallel data interfaces, control signals, clocks, and management ports. Designers should distinguish ordinary I/O resources from dedicated high-speed transceiver capabilities and verify each interface against the package-specific pinout, voltage standards, and timing constraints.

🔧

Test and Measurement Systems

The XC7K355T-1FFG901C can implement programmable test logic, parallel pattern generation, data comparison, and real-time analysis within a compact FPGA-based instrument. The large logic population supports multiple acquisition channels and concurrent measurement engines, while block RAM provides local storage for captured vectors and intermediate results. The 300 I/O can connect stimulus, response, trigger, and synchronization signals when timing permits. For precision instruments, validate clock jitter, input thresholds, output timing, and analog front-end compatibility; the FPGA should complement rather than obscure the accuracy and bandwidth of the external measurement circuitry.

🏭

Communications and Industrial Control

The XC7K355T-1FFG901C supports complex industrial controllers that must combine sequence logic, communication formatting, motion or equipment control, and diagnostics. Its programmable architecture permits protocol updates without changing the PCB, while the large I/O count provides access to sensors, actuators, memory, and field buses. Block RAM supports message queues, diagnostics, and motion profiles. For deployed equipment, the commercial-temperature version requires careful enclosure temperature control, while the XC7K355T-1FFG901I provides the same package family for industrial-temperature requirements. The chosen replacement should still pass functional safety, EMC, and environmental qualification for the complete system.

추천 제품 요약

XC7K355T-2FFG901C AMD 사용처: High-Speed Data Acquisition, Radar and Digital Signal Processing, Network and Communications Equipment XC7K355T-1FFG901I 사용처: High-Speed Data Acquisition, Industrial Imaging and Vision, Test and Measurement Systems, Communications and Industrial Control XC7K355T-1FFG901E Extended-temperature FFG901 alternative 사용처: Industrial Imaging and Vision, Test and Measurement Systems, Communications and Industrial Control XC7K355T-1FFG901 Same-architecture FFG901 ordering variant 사용처: Radar and Digital Signal Processing XC7K355T-2FFG901I AMD 사용처: Network and Communications Equipment
What is the AMD XC7K355T-1FFG901C?
The AMD XC7K355T-1FFG901C is a Kintex-7 FPGA built on a 28 nm process in a 900-ball FCBGA package. It provides 356,160 logic cells, 25,740 Kb of block RAM, and 300 user I/O. The -1 suffix denotes its speed grade, while the FFG901 package designation identifies the large 900-ball footprint used by the device.
How many logic cells and I/O does XC7K355T-1FFG901C have?
The XC7K355T-1FFG901C contains 356,160 logic cells and provides 300 user I/O in the FFG901 package. According to the manufacturer datasheet for the Kintex-7 family, these resources support parallel data paths, control logic, high-speed interfaces, and DSP-assisted processing. Actual usable capacity depends on the selected design, routing, timing closure, memory organization, and I/O standards.
What package does XC7K355T-1FFG901C use?
The XC7K355T-1FFG901C uses a 900-ball FCBGA package designated FFG901. This package is substantially larger and more complex than a conventional QFP, so a replacement must preserve both the 901-ball land pattern and the target device's voltage, configuration, and speed requirements. Use the AMD Kintex-7 package pinout files when assigning every ball.
Where can I download the XC7K355T-1FFG901C datasheet and pinout?
The XC7K355T-1FFG901C datasheet is available through the Kintex-7 documentation listed on this page, while exact package assignments are published in the AMD Kintex-7 package device pinout files. Use the package CSV or TXT files and the manufacturer's package drawing for PCB design because the 900-ball footprint includes power, ground, configuration, and user-I/O balls that cannot be inferred from a generic pinout diagram.
What is the operating temperature of XC7K355T-1FFG901C?
The XC7K355T-1FFG901C is identified as a commercial-temperature device, and the Kintex-7 documentation lists an operating range of -40 °C to 100 °C for the applicable device family. The C suffix denotes the commercial option. For a system exposed to greater temperature extremes, verify the exact ordering code and temperature qualification instead of assuming that every FF901 device has the same rating.
What is the difference between XC7K355T-1FFG901C and XC7K355T-2FFG901C?
Both devices use the Kintex-7 355T architecture and the 900-ball FFG901 package, but -1 and -2 identify different speed grades. The -2 grade provides higher performance than -1, while the -1 grade can offer a better power-performance balance for designs that do not require the fastest grade. Because FPGA timing, configuration, and power behavior are architecture-specific, replacing one with the other requires timing closure and resource verification.
Can XC7K355T-1FFG901I replace XC7K355T-1FFG901C?
The XC7K355T-1FFG901I retains the Kintex-7 355T device type, -1 speed grade, and 901-ball package family while changing the ordering temperature option to industrial. It is therefore a plausible same-package replacement when the target assembly requires industrial-temperature qualification. Review the exact package files, electrical limits, and qualification documentation before substituting it into production hardware.
What is the best drop-in replacement for XC7K355T-1FFG901C?
The closest same-footprint replacements are Kintex-7 355T variants in the FFG901 package, including XC7K355T-2FFG901C, XC7K355T-1FFG901I, XC7K355T-1FFG901E, XC7K355T-2FFG901I, and XC7K355T-1FFG901. Their speed and temperature options differ from the target, so each candidate must pass timing, power, qualification, and ordering-code checks before being considered a production drop-in replacement.
When should I choose XC7K355T-1FFG901C over a -2 speed-grade Kintex-7?
Choose the XC7K355T-1FFG901C when its timing performance satisfies the design and lower performance can reduce the design's power or cost objective. Choose the -2 FFG901C when the implementation fails -1 timing closure or requires the higher performance grade. The resources are the same, but speed-grade timing differences can affect pipeline depth, clock requirements, routing margins, and final power consumption.
Is XC7K355T-1FFG901C suitable for high-speed data acquisition?
Yes, the XC7K355T-1FFG901C is suitable for parallel high-speed data acquisition because it combines 356,160 logic cells, 25,740 Kb of block RAM, and 300 I/O in a Kintex-7 architecture. The practical sample rate and channel count depend on FPGA I/O standards, clocking, transceiver availability, PCB signal integrity, and timing closure. Interface implementation must be verified against the target pinout rather than inferred from I/O count alone.
How should a 900-ball FCBGA Kintex-7 FPGA be laid out on a PCB?
The XC7K355T-1FFG901C PCB should follow the AMD package drawing and Kintex-7 layout guidance for power-plane shape, decoupling, signal escaping, thermal vias, and ball-stack alignment. Place high-speed interfaces away from noisy power-conversion stages, keep return paths continuous, and provide multiple supply connections exactly where the package data specifies them. Validate the stack-up, via geometry, assembly profile, and X-ray inspection plan before fabrication.
What power and thermal considerations apply to XC7K355T-1FFG901C?
Power and thermal design must account for the device's configurable logic, I/O activity, operating speed, and the heat-transfer capability of the 900-ball FCBGA. A 1 V-class core supply alone does not determine total power because I/O and auxiliary rails also contribute. Use AMD's power-estimation methodology, follow recommended decoupling and plane construction, and conduct thermal simulation with the actual PCB stack-up and enclosure.
Is there an AMD alternative to XC7K355T-1FFG901C with a different package?
No different-package device qualifies as a true drop-in replacement for the XC7K355T-1FFG901C. Kintex-7 devices in packages such as FF676 or other ball counts cannot be soldered onto the FFG901 land pattern without PCB redesign. The alternatives listed here therefore retain the FFG901 package, while changes in speed grade or temperature grade must be checked against the original design requirements.
What can replace the XC7K355T-1FFG901C in an existing design?
An existing XC7K355T-1FFG901C design can be evaluated against the listed XC7K355T FFG901 speed- and temperature-grade variants. The most direct choices are XC7K355T-2FFG901C for a higher speed grade and XC7K355T-1FFG901I for an industrial-temperature option. Both preserve the package family, but the replacement still requires bitstream compatibility checks, timing analysis, power review, and verification against the target board schematic.
Where can I request a quote and current lead time for XC7K355T-1FFG901C?
The current price, stock position, and lead time for the XC7K355T-1FFG901C should be requested through the Request a Quote form on this page. Availability can vary by packaging configuration, production status, and order volume. For time-sensitive procurement, include the required delivery date, quantity, and acceptable alternative speed or temperature grades when submitting the request.

엔지니어링 참조 데이터: XC7K355T-1FFG901C — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Select the XC7K355T-1FFG901C when a design needs the Kintex-7 355T resource level, the -1 speed grade, and a commercial-temperature ordering option on the FFG901 footprint. Choose XC7K355T-2FFG901C when timing closure requires the higher -2 performance grade and its corresponding power characteristics are acceptable. Choose XC7K355T-1FFG901I when the same -1 performance is required in an industrial-temperature environment. XC7K355T-1FFG901E is appropriate when an extended-temperature ordering option is needed with the same package family, while XC7K355T-2FFG901I combines the faster grade with industrial-temperature qualification. The XC7K355T-1FFG901 is the closest ordering variant. All candidates preserve the FFG901 package family, but none should be fitted without confirming timing, bitstream, pinout, power, environmental, and qualification requirements.

대체품과의 비교

파라미터 이 제품 XC7K355T-2FFG901C XC7K355T-1FFG901I XC7K355T-1FFG901E XC7K355T-2FFG901I XC7K355T-1FFG901
Brand AMD AMD AMD AMD AMD AMD
Package 900-ball FCBGA (FFG901) 900-ball FCBGA (FFG901) 900-ball FCBGA (FFG901) 900-ball FCBGA (FFG901) 900-ball FCBGA (FFG901) 900-ball FCBGA (FFG901)
Device Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Logic Cells 356,160 cells 356,160 cells 356,160 cells 356,160 cells 356,160 cells 356,160 cells
Speed Grade -1 -2 -1 -1 -2 -1
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
Core Voltage Range 0.97 V to 1.03 V 0.97 V to 1.03 V 0.97 V to 1.03 V 0.97 V to 1.03 V 0.97 V to 1.03 V 0.97 V to 1.03 V

주요 차별점

  • Commercial -1 speed-grade option (vs XC7K355T-2FFG901C)
  • Direct industrial-temperature package-family option (vs XC7K355T-1FFG901I)
  • Same architecture and full 900-ball package retention (vs XC7K355T-1FFG901)

설계 노트

Use the AMD FFG901 package drawing and Kintex-7 PCB guidelines as the controlling references for ball assignment, power planes, decoupling, and escape routing. The 900-ball FCBGA requires a fine-pitch assembly process, matched pad and mask geometry, and careful layer-transition design. Confirm via-in-pad compatibility, solder-mask definition, assembly profile, and inspection access before releasing the PCB because errors in the escape network can affect many signals.

Treat core, I/O, and auxiliary rails as a coordinated power system rather than designing them independently. Place local decoupling exactly where the manufacturer package guidance recommends, preserve plane continuity beneath the device, and control return-current paths for high-speed nets. Estimated power depends on the configured design, clock rates, I/O activity, and speed grade, so use AMD's power estimator and verify worst-case rails with a prototype rather than relying on a single nominal value.

A 900-ball FCBGA can move substantial heat into an internal package plane, but PCB construction still governs heat removal from the assembled device. Include thermal vias and copper structures where specified, model the complete stack-up, and account for enclosure airflow and neighboring heat sources. The -1 speed grade may change both performance and dynamic power, so repeat the thermal analysis for the actual replacement grade rather than assuming thermal performance remains unchanged.

A same-package replacement is not automatically a functional replacement. Check speed-grade timing, temperature qualification, supported configuration bitstreams, pin multiplexing, I/O standards, power sequencing, and errata for each ordering code. For XC7K355T options, -1 and -2 grades can alter achievable clock rates, while commercial and industrial suffixes change environmental requirements. Complete synthesis, implementation, timing analysis, and board-level validation before substitution.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No product-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified in the product references. Confirm current compliance documentation with the manufacturer before procurement.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

xc7k355t 2ffg901i XC7K355T-1FFG901C datasheet XC7K355T-1FFG901C datasheet pdf XC7K355T-1FFG901C pinout XC7K355T-1FFG901C equivalent XC7K355T-1FFG901C replacement XC7K355T-1FFG901C cross reference XC7K355T-1FFG901C vs XC7K355T-2FFG901C XC7K355T-1FFG901C FFG901 package AMD XC7K355T-1FFG901C XC7K355T-1FFG901C price XC7K355T-1FFG901C stock XC7K355T-1FFG901C high speed acquisition XC7K355T FFG901 footprint

관련 부품 & 용어

AMD Xilinx XC7K355T-1FFG901C XC7K355T-2FFG901C XC7K355T-1FFG901I XC7K355T-1FFG901E XC7K355T-2FFG901I XC7K355T-1FFG901 Kintex-7 FPGA CPLD programmable logic field-programmable gate array logic cell block RAM user I/O Digital signal processing 28 nm process FFG901 900-ball FCBGA surface-mount semiconductor high-speed data acquisition industrial imaging radar signal processing network interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기