AMD

XC7K355T-2FFG901C - 356K Logic Cell Kintex-7 FPGA | AMD

부품 번호: XC7K355T-2FFG901C ✓ 활성
1 V nominal Vdss 901-pin FCBGA (FFG901) Package 1,286 MHz Speed
MOQ: 1 |

XC7K355T-2FFG901C 개요

The AMD XC7K355T-2FFG901C is a Kintex-7 field-programmable gate array with 356,160 logic cells, 26,357,760 bits of block RAM, and 300 user I/O in a 901-pin FCBGA package. Built on a 28 nm process and specified as a -2 speed-grade device, it combines a large programmable-logic fabric with high-speed serial transceivers and hard DSP resources for demanding signal-processing, communications, industrial-control, and test-equipment designs.

A Kintex-7 FPGA is a programmable-logic device within the broader FPGA and semiconductor hierarchy. Unlike fixed-function ASICs, an FPGA allows designers to implement parallel algorithms, control logic, interfaces, and signal-processing pipelines in reconfigurable hardware. The Kintex-7 family occupies a middle position between lower-resource Spartan-7 devices and higher-end Virtex-7 devices, combining substantial logic capacity, dedicated hardware resources, and midrange transceivers.

The XC7K355T provides 356,160 logic cells organized into 27,825 configurable logic blocks and 55,650 adaptive logic modules. Its block-memory capacity totals 26,357,760 bits, supporting packet buffering, DSP working storage, and data acquisition. The 300 user I/Os provide external interfaces alongside the device's dedicated high-speed serial transceivers. These resources make the device suitable for parallel ADC and DAC pipelines, network interface equipment, radar and test systems, industrial automation, and embedded video processing.

The -2 suffix identifies the device's -2 performance grade. Vendor listings report a maximum operating figure of 1,286 MHz for this device, while the core supply is identified as a nominal 1 V supply. The FFG901 designation corresponds to the 901-pin flip-chip BGA package, and the C ordering suffix identifies the commercial-temperature product version. Exact operating-temperature limits, transceiver characteristics, bank voltage requirements, and configuration-pin details must be confirmed in the package-specific Kintex-7 documentation.

The 901-pin FCBGA package makes careful PCB design essential. High-speed differential pairs require controlled impedance, length matching, and continuous return paths, while power delivery must support substantial transient current during configuration and logic switching. Decoupling, via stitching, thermal management, and BGA escape-routing density can determine whether a design reaches its intended performance.

This page combines package-specific sourcing information with drop-in replacement analysis and engineering guidance for Kintex-7 migrations. It also identifies where speed-grade, temperature-grade, and package differences must be reviewed before any substitution is approved for production.

드롭인 대체품: XC7K355T-2FFG901C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC7K355T-2FFG901C (동일 폼 팩터 및 풋프린트) — 차이점: Package, Mounting Type, Process Technology, Speed Grade.

AMD
Package: 900-ball FCBGA (FFG901)
Mounting Type: Surface mount
Process Technology: 28 nm
비교 대상: XC7K355T-2FFG901C →

XC7K355T-2FFG901I

✅ 드롭인
AMD
📦 901-pin FCBGA (FFG901)
Kintex-7 · 356160 · 27825 · 26357760 · 300 · 0.97 V ~ 1.03 V · -40°C ~ 100°C (TJ) · 900-BBGA, FCBGA

가격 문의

데이터시트 보기 →

XCE7K355T-2FFG901C

✅ 드롭인
📦 901-pin FCBGA (FFG901)
Extended-temperature ordering variant with the same Kintex-7 XC7K355T device and package; temperature limits require confirmation

📋 참조 대체품 (카탈로그에 없음)

XC7K355T-1FF901I

✅ 드롭인
📦 901-pin FCBGA (FFG901)
-1 speed grade replaces -2, reducing timing performance by roughly one grade while retaining 356,160 logic cells and the 901-ball footprint

📋 참조 대체품 (카탈로그에 없음)

XC7K355T-L2FFG901E

✅ 드롭인
📦 901-pin FCBGA (FFG901)
Lower-power -2L speed grade replaces the standard -2 grade, targeting lower maximum static power and lower dynamic power

📋 참조 대체품 (카탈로그에 없음)

XC7K355T-2FFG901C 최대 정격 & 전기적 특성

Device Type Kintex-7 field-programmable gate array (FPGA)
Logic Cells 356,160 cells
Configurable Logic Blocks 27,825 CLBs
Adaptive Logic Modules 55,650 ALMs
Total Block RAM 26,357,760 bits
User I/O 300 I/O
최대 클록 주파수 1,286 MHz
Process Technology 28 nm CMOS
Core Supply Voltage 1 V nominal
Speed Grade -2
Device Series Kintex-7 (XC7K355T)
패키지 901-pin FCBGA (FFG901)
실장 유형 SMD
Shipping Format Tray
Product Temperature Grade Commercial (C suffix)

XC7K355T-2FFG901C 901-pin fcbga (ffg901) 핀 구성 가이드

XC7K355T-2FFG901C(901-pin fcbga (ffg901) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC7K355T-2FFG901C의 901-pin fcbga (ffg901) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC7K355T-2FFG901C.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC7K355T-2FFG901C 적합 용도: 6 애플리케이션s: High-Speed Data Acquisition, Communications and Network Interface Equipment, Industrial Control and Automation, Radar and Defense Test Systems, Digital Video and Image Processing, Test and Measurement Instrumentation.

⚡

High-Speed Data Acquisition

The XC7K355T-2FFG901C fits parallel ADC and DAC pipelines that require parallel logic, large capture buffers, and deterministic data movement. Its 356,160 logic cells and 55,650 ALMs can implement deserializers, digital filtering, trigger logic, and timing correction, while 26,357,760 bits of block RAM can buffer multiple acquisition frames. The 300 user I/O provide ample parallel data connections, and the listed 1,286 MHz device operating figure supports demanding clock domains. Final interface rates still depend on the selected I/O standard and timing implementation.

🌐

Communications and Network Interface Equipment

The XC7K355T-2FFG901C is suitable for line cards, protocol converters, and network test equipment that combine packet logic with high-speed serial connectivity. The large CLB count supports parallel framing, buffering, and protocol state machines, while the dedicated Kintex-7 transceiver resources can reduce the amount of general-purpose fabric required for high-speed links. Its 901-pin FCBGA package provides extensive power and ground connectivity, but high-speed routing must maintain controlled differential impedance and adequate return-path continuity.

🏭

Industrial Control and Automation

The XC7K355T-2FFG901C can consolidate complex machine control, motion sequencing, safety logic, and communications into one programmable device. Its 27,825 CLBs provide enough parallel capacity for multi-axis control loops, while 300 user I/O support digital and analog-interface companion circuitry. Block RAM supports protocol tables and event histories. The commercial C-grade ordering code should be used only where the complete ambient and junction-temperature envelope is acceptable; XC7K355T-2FFG901I is the industrial-grade migration option.

✈️

Radar and Defense Test Systems

The XC7K355T-2FFG901C offers enough programmable logic, memory, and I/O for radar signal processing, test orchestration, and real-time analysis. Parallel FFT, correlation, filtering, and data-conditioning pipelines can map efficiently into the Kintex-7 fabric, while block RAM supports multi-channel sample buffering. The -2 speed grade provides additional timing margin over lower grades, and dedicated hardware resources reduce fabric pressure. Actual system timing, power, and environmental suitability must be confirmed through implementation, simulation, and qualification testing.

📺

Digital Video and Image Processing

The XC7K355T-2FFG901C can support parallel pixel pipelines, image enhancement, scaling, synchronization, and frame buffering. Its 356,160 logic cells are well suited to multi-channel processing, and 26,357,760 bits of block RAM can hold multiple lines or frames for pipeline balancing. The 300 I/O allow wide parallel interfaces to image sensors and display or capture boards. For very high-resolution streaming, system-level bandwidth and the exact number and speed of dedicated resources must be verified against the selected video standard.

🔧

Test and Measurement Instrumentation

The XC7K355T-2FFG901C fits multi-channel pattern generation, real-time analysis, protocol monitoring, and automated test systems. Programmable logic can combine acquisition control, sequencing, and data reduction, while block RAM provides local storage for high-rate samples. The 901-pin package exposes a large I/O count for parallel DUT stimulus and response capture. Designers should use the official FFG901 pinout files to assign banks, and check that every external interface's voltage, slew, and timing requirements match the selected I/O standard.

What is the AMD XC7K355T-2FFG901C?
The AMD XC7K355T-2FFG901C is a -2 speed-grade Kintex-7 FPGA with 356,160 logic cells, 26,357,760 bits of block RAM, and 300 user I/O in a 901-pin FCBGA package. According to the XC7K355T product data, the device uses 28 nm CMOS technology and a nominal 1 V core supply. It is intended for designs requiring substantially more parallel processing resources than lower-density FPGAs while retaining programmable logic, block RAM, DSP, and serial transceiver resources in one package.
How many logic cells and block RAM does XC7K355T-2FFG901C have?
The XC7K355T-2FFG901C provides 356,160 logic cells and 26,357,760 bits of block RAM. Its logic is organized into 27,825 configurable logic blocks and 55,650 adaptive logic modules. The RAM total is useful for packet buffering, parallel data acquisition, and DSP working storage. These figures come from the XC7K355T family listings and distinguish this device from smaller Kintex-7 members with reduced CLB and memory resources.
What package does XC7K355T-2FFG901C use?
The XC7K355T-2FFG901C uses the FFG901 package, a 901-pin flip-chip ball grid array with surface-mount construction. The package designation is part of the ordering code: FFG identifies the 901-ball package and C identifies the commercial-temperature version. Use the AMD Kintex-7 package pinout files for ball assignments and the package-specific datasheet for power, differential-pair, and ground-ball connectivity before laying out the PCB.
Can XC7K355T-2FFG901I replace XC7K355T-2FFG901C?
XC7K355T-2FFG901I is a close drop-in candidate because it retains the -2 speed grade, 356,160 logic cells, 26,357,760 RAM bits, 300 user I/O, and 901-pin FCBGA package. Its distinguishing feature is the I suffix for the industrial-temperature option, with a listed junction range of -40°C to 100°C. The electrical pinout matches, but the operating-temperature grade and any program-specific qualification requirements must be reviewed before substitution.
What is the difference between XC7K355T-2FFG901C and XC7K355T-2FFG901I?
Both parts use the Kintex-7 XC7K355T device, the -2 speed grade, and the 901-pin FCBGA package with 356,160 logic cells and 300 I/O. The principal ordering difference is temperature grade: the I version is the industrial option, while the C version is the commercial option. DigiKey lists the I device with a -40°C to 100°C junction range. For industrial deployments, the I-grade part is normally the safer choice; the C-grade part requires temperature verification against the intended ambient.
Is XC7K355T-1FF901I a drop-in replacement for XC7K355T-2FFG901C?
XC7K355T-1FF901I is a pin-compatible migration candidate because both are Kintex-7 XC7K355T devices in the 901-ball FCBGA family. Its -1 speed grade is slower than the -2 grade of the XC7K355T-2FFG901C, and its package code uses FF rather than FFG. The XC7K355T comparison data reports 356,160 logic cells and 55,650 ALMs for both devices, but timing closure and any board-specific constraints must be revalidated at the lower speed grade.
What can replace XC7K355T-2FFG901C?
The closest drop-in alternatives include XC7K355T-2FFG901I, XCE7K355T-2FFG901C, XC7K355T-1FF901I, and XC7K355T-L2FFG901E. All retain the Kintex-7 XC7K355T logic resource level and the 901-ball package family, but they differ in temperature grade, speed grade, or power-optimization class. Because FPGA substitutions can change timing, power behavior, and configuration constraints, approve only the variant whose complete operating envelope matches the original design.
Is XCE7K355T-2FFG901C equivalent to XC7K355T-2FFG901C?
XCE7K355T-2FFG901C is a closely related extended-temperature ordering variant of the same Kintex-7 XC7K355T silicon and package family. It preserves the 356,160-cell device identity and 901-pin FCBGA construction, making it a potential pin-compatible migration path. The precise commercial-versus-extended-temperature limits must be confirmed against the current AMD ordering guide, and the original design should be rechecked for timing and qualification requirements.
When should I choose XC7K355T-2FFG901C over XC7K355T-1FF901I?
Choose XC7K355T-2FFG901C when the design requires the higher -2 speed grade and operates within the commercial-temperature envelope. Choose XC7K355T-1FF901I only when the slower speed grade still satisfies timing and the industrial-temperature option is beneficial. Since both devices expose the same large Kintex-7 logic and memory resources, the decision normally depends on performance margin, environmental requirements, qualification, and supply rather than raw capacity.
Is XC7K355T-2FFG901C suitable for high-speed signal processing?
The XC7K355T-2FFG901C is suitable for high-speed parallel signal processing because it combines 356,160 logic cells, 55,650 ALMs, and 26,357,760 bits of block RAM in a single 28 nm Kintex-7 device. It can support parallel filters, digital control, packet processing, and data-acquisition pipelines, while dedicated hardware resources reduce reliance on general-purpose logic. Exact DSP slice count and transceiver data rates require confirmation from the package-specific data sheet.
Where can I download the XC7K355T datasheet PDF?
The XC7K355T family datasheet is available through the AMD/Xilinx product documentation, with indexed copies accessible from the linked datasheet pages. The family document is identified as DS182 and covers Kintex-7 DC and AC switching characteristics. For a released design, also obtain the FFG901 package pinout files and UG475 package information, since the family datasheet does not by itself provide every board-level routing detail.
Where can I find the XC7K355T FFG901 pinout?
The official Kintex-7 package device pinout files are available from AMD's package-pinout resource page, with TXT and CSV formats described in UG475. Use the FFG901-specific file to identify ball locations, power rails, and dedicated transceiver pins. The 901-ball footprint is too dense to reproduce reliably as a textual list, so use the manufacturer file for board layout and library creation.
What is the maximum clock frequency listed for XC7K355T-2FFG901C?
The product listing for XC7K355T-2FFG901C states a maximum operating frequency of 1,286 MHz. This figure describes the device's advertised maximum operating point and should not be interpreted as the frequency achievable by every user clock in every design. Actual timing depends on the selected clock region, I/O standard, routing, speed grade, power conditions, and timing constraints, so complete implementation with Vivado is required.
How should the XC7K355T-2FFG901C power rails be decoupled?
Decouple each power rail with the capacitance and placement required by the Kintex-7 package-specific power guidance, using multiple local capacitors rather than a single bulk component. The FFG901 package contains numerous supply and ground balls, so via stitching must connect the board planes directly beneath the device. Estimated: supply droop scales with simultaneous switching current and rail impedance, so confirm every rail with power-integrity analysis and thermal simulation before fabrication.
Where can I buy XC7K355T-2FFG901C and what is its lead time?
XC7K355T-2FFG901C can be requested for quotation through the Request a Quote form on this page. Current inventory, volume pricing, and lead time should be confirmed with the supplier because they vary by quantity and market conditions. The device is listed in tray packaging, and procurement should preserve the exact XC7K355T-2FFG901C ordering code to avoid unintended changes to temperature grade, speed grade, or package.
What are the key specifications of XC7K355T-2FFG901C that engineers should know?
The key XC7K355T-2FFG901C specifications are 356,160 logic cells, 27,825 CLBs, 55,650 ALMs, 26,357,760 bits of block RAM, and 300 user I/O. The device is built on 28 nm CMOS, uses a nominal 1 V core supply, belongs to the -2 speed grade, and is packaged in the 901-pin FCBGA configuration. These resource figures position it for parallel processing, buffering, high-speed interfaces, and communication equipment.

엔지니어링 참조 데이터: XC7K355T-2FFG901C — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC7K355T-2FFG901C for commercial-temperature Kintex-7 designs that need the -2 speed grade and the full 356,160-cell, 26,357,760-bit-RAM configuration in FFG901. Select XC7K355T-2FFG901I when the same electrical performance is required in an industrial environment; it preserves the resource count, speed grade, and footprint. Use XCE7K355T-2FFG901C when an extended-temperature ordering variant matches the deployment profile and qualification plan. Consider XC7K355T-1FF901I only after confirming that the lower speed grade still closes timing, or XC7K355T-L2FFG901E when lower static and dynamic power are more important than maximum performance. In every case, verify configuration compatibility, operating-temperature limits, pinout, power rails, and system timing before releasing a substitute to production.

대체품과의 비교

파라미터 이 제품 XC7K355T-2FFG901I XCE7K355T-2FFG901C XC7K355T-1FF901I XC7K355T-L2FFG901E
Brand AMD AMD AMD AMD AMD
Package 901-pin FCBGA (FFG901) 901-pin FCBGA (FFG901) - same 901-pin FCBGA (FFG901) - same 901-pin FCBGA (FFG901) - same family 901-pin FCBGA (FFG901) - same family
Logic Cells 356,160 cells 356,160 cells 356,160 cells 356,160 cells 356,160 cells
Configurable Logic Blocks 27,825 CLBs 27,825 CLBs 27,825 CLBs 27,825 CLBs 27,825 CLBs
Total Block RAM 26,357,760 bits 26,357,760 bits 26,357,760 bits 26,357,760 bits 26,357,760 bits
User I/O 300 I/O 300 I/O 300 I/O 300 I/O 300 I/O
Speed Grade -2 -2 -2 -1 -2L lower-power grade
Temperature Class Commercial Industrial Extended-temperature variant Industrial Extended-temperature variant
Process Technology 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS 28 nm CMOS

주요 차별점

  • Standard -2 performance grade with a direct industrial-temperature migration path (vs XC7K355T-2FFG901I)
  • Lower-power -2L option for designs where power matters more than maximum speed (vs XC7K355T-L2FFG901E)
  • Higher performance headroom than the -1 migration grade (vs XC7K355T-1FF901I)

설계 노트

Treat the FFG901 supply network as a high-current, multi-rail design rather than a conventional logic load. Decouple each required rail at multiple locations near the BGA balls, stitch power and ground vias into the planes, and separate sensitive supply routing from high-current configuration paths. Estimated: rail droop increases as dynamic current rises and rail impedance falls; derive the actual droop from the switching profile and use power-integrity simulation to verify the termination and decoupling network.

Create the BGA footprint directly from the official AMD FFG901 package pinout files rather than transcribing a list of 901 connections. Maintain layer symmetry around the device, provide short via transitions for escape routing, and preserve continuous reference planes beneath high-speed pairs. Use the manufacturer ball-map data to identify supply, ground, configuration, clock, and dedicated transceiver balls before assigning bank voltages.

A 901-ball FCBGA requires an effective thermal path through the package and PCB stack. Use the recommended thermal via field beneath the device, retain layer symmetry, and evaluate both junction temperature and the local board gradient. Estimated: junction rise equals total dissipated power multiplied by the effective package-to-ambient thermal resistance; obtain the relevant thermal model and ambient conditions before relying on a generic resistance value.

Use package-aware placement for clock and high-speed differential interfaces. The -2 grade offers performance margin, but routing still determines practical timing margin. Match length within the constraints of the selected interface, avoid plane splits beneath pairs, control impedance with the actual stackup, and check both transmit and receive paths against the package-specific AC specifications. Do not treat the listed 1,286 MHz figure as a substitute for post-route timing analysis.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations are not confirmed in the retrieved product pages. The C ordering suffix denotes the commercial-temperature device class and is not evidence of RoHS, REACH, or halogen-free status.

관련 검색

xc7k355t 2ffg901i XC7K355T-2FFG901C datasheet XC7K355T-2FFG901C datasheet pdf XC7K355T-2FFG901C pinout XC7K355T-2FFG901C equivalent XC7K355T-2FFG901C replacement XC7K355T-2FFG901C cross reference XC7K355T-2FFG901C vs XC7K355T-1FF901I XC7K355T-2FFG901C FFG901 footprint XC7K355T-2FFG901C price XC7K355T-2FFG901C stock AMD XC7K355T-2FFG901C XC7K355T FFG901 pinout files Kintex-7 356160 cell FPGA

관련 부품 & 용어

AMD Xilinx XC7K355T-2FFG901C XC7K355T-2FFG901I XCE7K355T-2FFG901C XC7K355T-1FF901I XC7K355T-L2FFG901E Kintex-7 FPGA field-programmable gate array programmable logic logic cell configurable logic block adaptive logic module block RAM 28 nm CMOS FFG901 FCBGA surface-mount package digital signal processing high-speed transceiver industrial automation communications equipment data acquisition
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기