XC7Z045-2FFG676I - 350K Logic Cell ARM Cortex-A9 SoC | AMD
부품 번호: XC7Z045-2FFG676I ✓ 활성XC7Z045-2FFG676I 개요
A programmable system on chip combines a programmable logic fabric with a hard processor subsystem in one semiconductor package. Within the FPGA and CPLD product hierarchy, the Zynq-7000 family combines Kintex-7000 FPGA logic, an ARM Cortex-A9 processor subsystem, memory interfaces, programmable I/O, and system peripherals. This integration can reduce component count and board area while allowing hardware acceleration and software-controlled functions to share one board.
The principal feature set includes 350K programmable logic cells, two ARM Cortex-A9 processor cores, an 800 MHz processor operating frequency, CoreSight technology, and a 676-pin FCBGA package. The listed on-chip RAM size is 256 KB. These resources allow designers to implement parallel datapaths, control logic, communication interfaces, and processor-based supervisory functions within one FPGA SoC.
The device belongs to the Zynq-7000 product line, whose architecture separates application execution in the ARM Cortex-A9 subsystem from real-time or parallel processing in the FPGA fabric. Processor software can configure the programmable logic and coordinate system-level functions. The exact processor memory interfaces, programmable I/O counts, voltage ratings, temperature limits, and package thermal characteristics are not stated in the available product information and should be confirmed in the AMD Zynq-7000 SoC datasheet before design release.
Typical applications include industrial machine control, factory automation, network equipment, high-speed data acquisition, embedded vision, communications infrastructure, and test and measurement systems. In each case, the FPGA fabric can accelerate deterministic parallel operations while the Cortex-A9 subsystem runs control software, operating-system support, or supervisory code. The same 676-pin package is particularly useful when an existing Zynq-7000 PCB must support a different speed, temperature, or qualification grade without changing its land pattern.
PCB design should begin with the AMD package pinout files and UG865 package definitions for the selected 676-ball device. Decoupling, power-plane segmentation, high-speed memory routing, clocking, and exposed-package thermal management must follow the manufacturer’s reference design and layout guidance. Firmware, boot media, memory interfaces, and programmable logic compatibility also need verification before selecting a different Zynq-7000 device as a hardware replacement.
This product record combines the exact Zynq-7000 device identity, package information, same-package replacement analysis, comparison guidance, and practical PCB considerations in a form useful for hardware and procurement reviews. It is intended to support design decisions rather than replace the complete AMD datasheet, package files, silicon documentation, or hardware-design guides.
드롭인 대체품: XC7Z045-2FFG676I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7Z045-2FFG676I (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Device Type, Package, Supply Voltage, Package Type.
XC7Z045-1FFG676I
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z045-1FBG676I
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z045-1FFG676C
✅ 드롭인가격 문의
데이터시트 보기 →XC7Z045-2FFG676C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z045-3FFG676I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7Z045-2FFG676I 최대 정격 & 전기적 특성
| Product Type | Zynq-7000 Kintex-7000 FPGA system on chip |
| Processor Cores | 2 ARM Cortex-A9 MPCore cores |
| Processor Frequency | 800 MHz |
| Programmable Logic Cells | 350K logic cells |
| On-Chip RAM | 256 KB |
| Debug Technology | CoreSight |
| FPGA Family | Kintex-7000 |
| Product Series | Zynq-7000 |
| Package Type | 676-FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Total Pin Count | 676 pins |
| 실장 유형 | Surface mount |
| Packaging Type | Tray |
| RoHS 상태 | RoHS compliant |
| Core Architecture | ARM Cortex-A9 |
| Device Classification | System on Chip (SoC) |
XC7Z045-2FFG676I 27 mm x 27 mm 핀 구성 가이드
XC7Z045-2FFG676I(27 mm x 27 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7Z045-2FFG676I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7Z045-2FFG676I 적합 용도: 6 애플리케이션s: Industrial Machine Control, Network Data Processing, High-Speed Data Acquisition, Embedded Vision Processing, Test and Measurement, Communications Infrastructure.
Industrial Machine Control
The XC7Z045-2FFG676I fits machine-control systems that divide real-time I/O processing between programmable logic and higher-level software. Its dual ARM Cortex-A9 cores at 800 MHz can coordinate motion profiles, diagnostics, and communications, while 350K logic cells support deterministic pulse generation, encoder processing, interlocks, and parallel interface logic. The 676-FCBGA package permits a single-board architecture with substantial SoC and memory-interface resources. For industrial use, confirm the exact temperature grade, power limits, and qualification requirements in the AMD device documentation before approving the ordering code.
추천
Network Data Processing
The XC7Z045-2FFG676I is suitable for network equipment requiring a programmable packet-processing path alongside a conventional processor. The 350K-cell FPGA fabric can implement parallel framing, classification, filtering, or compression functions, while the 800 MHz dual Cortex-A9 subsystem handles control-plane software and board management. A system can partition time-critical traffic work from general-purpose tasks without separating them into unrelated processors. Exact DDR memory interfaces, supported I/O standards, clock requirements, and power sequencing must be selected from the manufacturer data sheet before schematic capture.
추천
High-Speed Data Acquisition
The XC7Z045-2FFG676I can serve as the central device in acquisition systems that need flexible sampling logic and embedded control. FPGA fabric resources can implement parallel ADC interfaces, digital filtering, decimation, or trigger logic, while the dual 800 MHz Cortex-A9 cores run configuration algorithms, timestamp handling, and data-transfer software. The combination permits a configurable signal chain that is easier to update than fixed logic. Signal integrity, supported memory data rates, and analog-interface timing depend on the selected external components and must be validated with AMD interface guidance.
추천
Embedded Vision Processing
The XC7Z045-2FFG676I is suitable for embedded vision controllers because its FPGA fabric can accelerate pixel pipelines and its dual Cortex-A9 subsystem can run higher-level control or analytics. Potential parallel tasks include image pre-processing, thresholding, frame synchronization, and sensor-interface adaptation, while processor software manages configuration and system communication. Its 350K logic-cell capacity and 800 MHz processor frequency provide a useful balance for compact industrial camera equipment. Camera-interface timing, memory bandwidth, thermal performance, and the applicable operating-temperature grade must be verified for the complete design.
추천
Test and Measurement
The XC7Z045-2FFG676I fits programmable instrumentation in which acquisition, timing, and control functions must be updated in the field. FPGA logic can execute deterministic state machines, counters, trigger paths, and fast local processing, while the dual Cortex-A9 cores provide a platform for control software, calibration data, and user interfaces. The 676-FCBGA package integrates these functions without requiring a separate processor and FPGA pair. Instrumentation designers should confirm supported memory configurations, clocking resources, I/O standards, power sequencing, and thermal margins against the relevant AMD reference designs.
추천
Communications Infrastructure
The XC7Z045-2FFG676I is appropriate for communication equipment requiring programmable throughput and a processor-based management plane. FPGA logic can handle time-critical framing, scrambling, channelization, or interface adaptation, while the 800 MHz dual Cortex-A9 subsystem executes configuration, diagnostics, and protocol control. This heterogeneous arrangement is useful in gateways, baseband modules, and adaptable radio equipment where requirements evolve faster than fixed logic. Designers must select the exact transceiver interfaces, memory topology, clocking architecture, and power rails from the AMD documentation before finalizing the PCB.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7Z045-2FFG676I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7Z045-1FFG676I | XC7Z045-1FBG676I | XC7Z045-1FFG676C | XC7Z045-2FFG676C | XC7Z045-3FFG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) |
| Product Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| FPGA Family | Kintex-7000 | Kintex-7000 | Kintex-7000 | Kintex-7000 | Kintex-7000 | Kintex-7000 |
| Processor Architecture | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Logic Cells | 350K | 350K | 350K | 350K | 350K | 350K |
| Device Grade | -2, I suffix | -1, I suffix | -1, FBG suffix | -1, C suffix | -2, C suffix | -3, I suffix |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
주요 차별점
- Combines processor and programmable logic in one device (vs XC7Z045-1FFG676I)
- Uses the -2 device grade with the 676-ball footprint (vs XC7Z045-3FFG676I)
- Keeps the smaller 676-ball land pattern (vs XC7Z045-L2FFG676I)
설계 노트
Use the AMD Zynq-7000 676-ball package files and UG865 definitions for every escape route. Place the prescribed decoupling capacitors at their assigned power balls, preserve the recommended plane geometry, and avoid routing high-speed processor or memory signals across plane splits. Because this is a 676-ball FCBGA, escape routing, via-in-pad construction, solder-mask design, and assembly process selection must be coordinated with the fabricator before layout release.
Implement the AMD reference power topology rather than inferring rails from the distributor summary. Separate the processor, FPGA core, and I/O supplies as directed, connect the required power-good, reset, and configuration signals to their documented pins, and validate sequencing against the selected XC7Z045 grade. Use the manufacturer’s recommended voltage regulators, ferrite impedances, and bulk-capacitor placement to prevent startup droop or rail instability.
The 676-FCBGA package requires a deliberate thermal path, and actual junction temperature depends on processor activity, FPGA utilization, board copper, airflow, and the enclosure. Estimate worst-case dissipation using the selected grade’s datasheet limits, then model the PCB and heat-spreader stack-up. Provide thermal vias or copper structures where the package guidance calls for them, and avoid placing heat-sensitive components directly beneath the device without verifying the thermal profile.
Do not treat a matching ball count as proof of an acceptable replacement. Compare the speed suffix, temperature suffix, production grade, voltage limits, power limits, configuration behavior, and product status. The XC7Z045-L2FFG676I is a clear package mismatch because it uses 900 balls, while 676-ball options can still differ in operational grade. Require bitstream, firmware, and system validation before approving any substitution.
규정 준수 정보
RoHS compliance is stated for the exact ordering code. The product is an FPGA SoC rather than an automotive-qualified device, so AEC-Q100 status is recorded as not applicable.