XC7Z045-2FFG676I - 350K Logic Cell ARM Cortex-A9 SoC | AMD
MPN: XC7Z045-2FFG676I ✓ Hoạt độngXC7Z045-2FFG676I Tóm tắt
A programmable system on chip combines a programmable logic fabric with a hard processor subsystem in one semiconductor package. Within the FPGA and CPLD product hierarchy, the Zynq-7000 family combines Kintex-7000 FPGA logic, an ARM Cortex-A9 processor subsystem, memory interfaces, programmable I/O, and system peripherals. This integration can reduce component count and board area while allowing hardware acceleration and software-controlled functions to share one board.
The principal feature set includes 350K programmable logic cells, two ARM Cortex-A9 processor cores, an 800 MHz processor operating frequency, CoreSight technology, and a 676-pin FCBGA package. The listed on-chip RAM size is 256 KB. These resources allow designers to implement parallel datapaths, control logic, communication interfaces, and processor-based supervisory functions within one FPGA SoC.
The device belongs to the Zynq-7000 product line, whose architecture separates application execution in the ARM Cortex-A9 subsystem from real-time or parallel processing in the FPGA fabric. Processor software can configure the programmable logic and coordinate system-level functions. The exact processor memory interfaces, programmable I/O counts, voltage ratings, temperature limits, and package thermal characteristics are not stated in the available product information and should be confirmed in the AMD Zynq-7000 SoC datasheet before design release.
Typical applications include industrial machine control, factory automation, network equipment, high-speed data acquisition, embedded vision, communications infrastructure, and test and measurement systems. In each case, the FPGA fabric can accelerate deterministic parallel operations while the Cortex-A9 subsystem runs control software, operating-system support, or supervisory code. The same 676-pin package is particularly useful when an existing Zynq-7000 PCB must support a different speed, temperature, or qualification grade without changing its land pattern.
PCB design should begin with the AMD package pinout files and UG865 package definitions for the selected 676-ball device. Decoupling, power-plane segmentation, high-speed memory routing, clocking, and exposed-package thermal management must follow the manufacturer’s reference design and layout guidance. Firmware, boot media, memory interfaces, and programmable logic compatibility also need verification before selecting a different Zynq-7000 device as a hardware replacement.
This product record combines the exact Zynq-7000 device identity, package information, same-package replacement analysis, comparison guidance, and practical PCB considerations in a form useful for hardware and procurement reviews. It is intended to support design decisions rather than replace the complete AMD datasheet, package files, silicon documentation, or hardware-design guides.
Bộ thay thế dễ dàng lắp đặt cho XC7Z045-2FFG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC7Z045-2FFG676I (cùng hình factor và footprint) — khác nhau ở Architecture, Device Type, Package, Supply Voltage, Package Type.
XC7Z045-1FFG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z045-1FBG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z045-1FFG676C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC7Z045-2FFG676C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z045-3FFG676I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC7Z045-2FFG676I Tỷ lệ tối đa & tính chất điện
| Product Type | Zynq-7000 Kintex-7000 FPGA system on chip |
| Processor Cores | 2 ARM Cortex-A9 MPCore cores |
| Processor Frequency | 800 MHz |
| Programmable Logic Cells | 350K logic cells |
| On-Chip RAM | 256 KB |
| Debug Technology | CoreSight |
| FPGA Family | Kintex-7000 |
| Product Series | Zynq-7000 |
| Package Type | 676-FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Total Pin Count | 676 pins |
| Kiểu lắp đặt | Surface mount |
| Packaging Type | Tray |
| Trạng thái RoHS | RoHS compliant |
| Core Architecture | ARM Cortex-A9 |
| Device Classification | System on Chip (SoC) |
Hướng dẫn cấu hình chân XC7Z045-2FFG676I 27 mm x 27 mm
Cấu hình chân cho XC7Z045-2FFG676I (27 mm x 27 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC7Z045-2FFG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC7Z045-2FFG676I phù hợp cho 6 Áp dụngs: Industrial Machine Control, Network Data Processing, High-Speed Data Acquisition, Embedded Vision Processing, Test and Measurement, Communications Infrastructure.
Industrial Machine Control
The XC7Z045-2FFG676I fits machine-control systems that divide real-time I/O processing between programmable logic and higher-level software. Its dual ARM Cortex-A9 cores at 800 MHz can coordinate motion profiles, diagnostics, and communications, while 350K logic cells support deterministic pulse generation, encoder processing, interlocks, and parallel interface logic. The 676-FCBGA package permits a single-board architecture with substantial SoC and memory-interface resources. For industrial use, confirm the exact temperature grade, power limits, and qualification requirements in the AMD device documentation before approving the ordering code.
Được đề xuất
Network Data Processing
The XC7Z045-2FFG676I is suitable for network equipment requiring a programmable packet-processing path alongside a conventional processor. The 350K-cell FPGA fabric can implement parallel framing, classification, filtering, or compression functions, while the 800 MHz dual Cortex-A9 subsystem handles control-plane software and board management. A system can partition time-critical traffic work from general-purpose tasks without separating them into unrelated processors. Exact DDR memory interfaces, supported I/O standards, clock requirements, and power sequencing must be selected from the manufacturer data sheet before schematic capture.
Được đề xuất
High-Speed Data Acquisition
The XC7Z045-2FFG676I can serve as the central device in acquisition systems that need flexible sampling logic and embedded control. FPGA fabric resources can implement parallel ADC interfaces, digital filtering, decimation, or trigger logic, while the dual 800 MHz Cortex-A9 cores run configuration algorithms, timestamp handling, and data-transfer software. The combination permits a configurable signal chain that is easier to update than fixed logic. Signal integrity, supported memory data rates, and analog-interface timing depend on the selected external components and must be validated with AMD interface guidance.
Được đề xuất
Embedded Vision Processing
The XC7Z045-2FFG676I is suitable for embedded vision controllers because its FPGA fabric can accelerate pixel pipelines and its dual Cortex-A9 subsystem can run higher-level control or analytics. Potential parallel tasks include image pre-processing, thresholding, frame synchronization, and sensor-interface adaptation, while processor software manages configuration and system communication. Its 350K logic-cell capacity and 800 MHz processor frequency provide a useful balance for compact industrial camera equipment. Camera-interface timing, memory bandwidth, thermal performance, and the applicable operating-temperature grade must be verified for the complete design.
Được đề xuất
Test and Measurement
The XC7Z045-2FFG676I fits programmable instrumentation in which acquisition, timing, and control functions must be updated in the field. FPGA logic can execute deterministic state machines, counters, trigger paths, and fast local processing, while the dual Cortex-A9 cores provide a platform for control software, calibration data, and user interfaces. The 676-FCBGA package integrates these functions without requiring a separate processor and FPGA pair. Instrumentation designers should confirm supported memory configurations, clocking resources, I/O standards, power sequencing, and thermal margins against the relevant AMD reference designs.
Được đề xuất
Communications Infrastructure
The XC7Z045-2FFG676I is appropriate for communication equipment requiring programmable throughput and a processor-based management plane. FPGA logic can handle time-critical framing, scrambling, channelization, or interface adaptation, while the 800 MHz dual Cortex-A9 subsystem executes configuration, diagnostics, and protocol control. This heterogeneous arrangement is useful in gateways, baseband modules, and adaptable radio equipment where requirements evolve faster than fixed logic. Designers must select the exact transceiver interfaces, memory topology, clocking architecture, and power rails from the AMD documentation before finalizing the PCB.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC7Z045-2FFG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC7Z045-1FFG676I | XC7Z045-1FBG676I | XC7Z045-1FFG676C | XC7Z045-2FFG676C | XC7Z045-3FFG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) |
| Product Family | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 | Zynq-7000 |
| FPGA Family | Kintex-7000 | Kintex-7000 | Kintex-7000 | Kintex-7000 | Kintex-7000 | Kintex-7000 |
| Processor Architecture | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Logic Cells | 350K | 350K | 350K | 350K | 350K | 350K |
| Device Grade | -2, I suffix | -1, I suffix | -1, FBG suffix | -1, C suffix | -2, C suffix | -3, I suffix |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Bảo phân biệt quan trọng
- Combines processor and programmable logic in one device (vsXC7Z045-1FFG676I)
- Uses the -2 device grade with the 676-ball footprint (vsXC7Z045-3FFG676I)
- Keeps the smaller 676-ball land pattern (vsXC7Z045-L2FFG676I)
Ghi chú thiết kế
Use the AMD Zynq-7000 676-ball package files and UG865 definitions for every escape route. Place the prescribed decoupling capacitors at their assigned power balls, preserve the recommended plane geometry, and avoid routing high-speed processor or memory signals across plane splits. Because this is a 676-ball FCBGA, escape routing, via-in-pad construction, solder-mask design, and assembly process selection must be coordinated with the fabricator before layout release.
Implement the AMD reference power topology rather than inferring rails from the distributor summary. Separate the processor, FPGA core, and I/O supplies as directed, connect the required power-good, reset, and configuration signals to their documented pins, and validate sequencing against the selected XC7Z045 grade. Use the manufacturer’s recommended voltage regulators, ferrite impedances, and bulk-capacitor placement to prevent startup droop or rail instability.
The 676-FCBGA package requires a deliberate thermal path, and actual junction temperature depends on processor activity, FPGA utilization, board copper, airflow, and the enclosure. Estimate worst-case dissipation using the selected grade’s datasheet limits, then model the PCB and heat-spreader stack-up. Provide thermal vias or copper structures where the package guidance calls for them, and avoid placing heat-sensitive components directly beneath the device without verifying the thermal profile.
Do not treat a matching ball count as proof of an acceptable replacement. Compare the speed suffix, temperature suffix, production grade, voltage limits, power limits, configuration behavior, and product status. The XC7Z045-L2FFG676I is a clear package mismatch because it uses 900 balls, while 676-ball options can still differ in operational grade. Require bitstream, firmware, and system validation before approving any substitution.
Thông tin tuân thủ
RoHS compliance is stated for the exact ordering code. The product is an FPGA SoC rather than an automotive-qualified device, so AEC-Q100 status is recorded as not applicable.