XC9572XL-7PCG44C - 72-Macrocell 3.3V CPLD | AMD
부품 번호: XC9572XL-7PCG44C ✗ 단종XC9572XL-7PCG44C 개요
A CPLD is a programmable digital logic device that combines reconfigurable logic structures with nonvolatile configuration memory. In the broader semiconductor hierarchy, a CPLD belongs to programmable logic devices alongside FPGAs and PAL devices. It is positioned between simple fixed logic and larger FPGAs: designs can implement multiple state machines, interface controllers, counters, address decoding, and glue logic while retaining the programming tools and deterministic architecture associated with the XC9500XL family.
The XC9572XL-7PCG44C provides 72 macrocells, 34 user I/O pins, 1,600 usable gates, and four 54V18 function blocks. Its 3.3 V operating supply supports integration with contemporary CMOS control logic. In-system programmability supports at least 10,000 program or erase cycles, allowing the configuration to be updated without removing the device from its circuit. Commercial temperature grading and RoHS-compliant, lead-free construction suit industrial, communications, instrumentation, and embedded-control equipment.
The device uses a deterministic CPLD architecture in which interconnected macrocells implement combinational and registered logic. The -7 grade identifies its timing class, with a stated 5 ns propagation delay. This figure is useful for preliminary timing planning, but each design must also satisfy the setup, hold, clock, and I/O constraints in AMD datasheet DS057. The XC9572XL family was designed for compact logic consolidation and legacy programmable-logic migration.
Typical uses include peripheral interface logic, data-format conversion, bus arbitration, industrial control sequencing, test-instrument signal conditioning, and embedded communications. A design can combine several formerly discrete PAL, GAL, or small CPLD functions into one programmable device, reducing board area and simplifying firmware-managed configuration workflows. The 34 available I/O pins are especially useful for parallel buses, control signals, and status indicators.
Designers should treat configuration retention, pinout, supply sequencing, and timing constraints as the principal implementation checks. Confirm the exact package drawing and pin assignments in AMD datasheet DS057 before layout. Because this is a mature programmable-logic family, software-tool availability, programmer hardware, and lifecycle support should also be evaluated before committing a new production design.
This page combines device-level specifications, lifecycle considerations, pin and programming guidance, and qualified same-package comparison information to support legacy CPLD maintenance, cross-reference, and design-review decisions without replacing the manufacturer’s complete datasheet.
드롭인 대체품: XC9572XL-7PCG44C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC9572XL-7PCG44C (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, RoHS Status, Temperature Grade.
XC9572XL-7PCG44I
✅ 드롭인가격 문의
데이터시트 보기 →XC9572XL-10PCG44C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC9572XL-15PCG44C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC9572XL-7PCG44C 최대 정격 & 전기적 특성
| Device Type | Complex Programmable Logic Device (CPLD) |
| Macrocell Count | 72 macrocells |
| User I/O Count | 34 I/O |
| Usable Gate Count | 1,600 gates |
| Function Block Count | 4 function blocks |
| Function Block Architecture | 54V18 architecture |
| Propagation Delay | 5 ns |
| 공급 전압 | 3.3 V |
| Programming Type | In-system programmable |
| Program/Erase Endurance | At least 10,000 cycles |
| Temperature Grade | Commercial |
| Package Code | QCCJ |
| Package Shape | Square |
| Terminal Count | 44 terminals |
| 실장 유형 | J-bend surface mount |
| Lead-Free Status | Lead-free |
| RoHS 상태 | RoHS compliant |
XC9572XL-7PCG44C square 핀 구성 가이드
XC9572XL-7PCG44C(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC9572XL-7PCG44C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC9572XL-7PCG44C 적합 용도: 6 애플리케이션s: Industrial Control and Sequencing, Peripheral Bus Interface Logic, Test and Measurement Instrumentation, Communications Interface Consolidation, Embedded System Glue Logic, Legacy Board Repair and Upgrade.
Industrial Control and Sequencing
The AMD XC9572XL-7PCG44C fits compact machine-control logic that coordinates sensors, actuators, interlocks, and operating states. Its 72 macrocells and four 54V18 function blocks can implement multiple state machines, debounce logic, counter chains, and sequencing rules without splitting the design across several devices. The 34 user I/O pins provide practical capacity for parallel control and status signals, while the 5 ns propagation delay supports short combinational paths. For installations with elevated ambient temperatures, compare the commercial-grade target with the industrial-grade XC9572XL-7PCG44I and confirm the enclosure temperature against the device limits.
추천
Peripheral Bus Interface Logic
The XC9572XL-7PCG44C is suitable for implementing address decoding, bus arbitration, data-width conversion, and handshake logic between processors and peripheral devices. Its 34 user I/O pins can accommodate address, control, and data lanes for a compact parallel interface, while 1,600 usable gates provide room for protocol state machines and error handling. The deterministic CPLD architecture is useful where engineers want fixed, reviewable hardware behavior. Validate every timing path against AMD datasheet DS057, particularly when the target’s 5 ns propagation-delay grade is used to establish the design’s timing margin.
추천
Test and Measurement Instrumentation
The AMD XC9572XL-7PCG44C can consolidate trigger sequencing, mode control, status decoding, and data-routing functions in laboratory instrumentation. Four function blocks and 72 macrocells allow designers to place multiple counters and state machines around a common control structure, while 34 I/O pins support front-panel controls, acquisition interfaces, and indicator signals. The commercial temperature grade fits controlled indoor equipment. Confirm the package pinout and input/output electrical characteristics in AMD datasheet DS057 because instrumentation designs often combine fast external signals with programmable control logic.
추천
Communications Interface Consolidation
The XC9572XL-7PCG44C is appropriate for legacy communications equipment requiring deterministic framing, command parsing, and control logic around a processor or ASIC. Its 72 macrocells can absorb repeated framing counters, parity checks, buffer controls, and status flags, reducing reliance on scarce processor I/O. The 34 user I/O pins support parallel command and response paths, and in-system programmability allows controlled configuration updates with at least 10,000 program or erase cycles. Check signal timing, drive strength, and package-level constraints in DS057 rather than assuming that a general-purpose CPLD timing figure covers every external interface.
추천
Embedded System Glue Logic
The AMD XC9572XL-7PCG44C can serve as an FPGA-like companion for systems that need a small amount of deterministic logic alongside a microcontroller or processor. Suitable tasks include startup sequencing, reset distribution, watchdog handling, interrupt arbitration, keypad scanning, and display multiplexing. Its 72 macrocells and 1,600 usable gates permit consolidation of several small functions, while the 34 I/O pins provide a practical boundary between the processor and peripherals. Use the target when the required paths need the -7 timing class; otherwise, evaluate the lower-speed same-package variants against the system clock and external timing requirements.
추천
Legacy Board Repair and Upgrade
The XC9572XL-7PCG44C is useful when maintaining or replicating equipment built around the mature XC9572XL architecture. Its four function blocks, 72 macrocells, and nonvolatile in-system programmability make it possible to replace a failed CPLD without redesigning the surrounding board, provided the replacement has the correct package, pinout, voltage, temperature grade, and timing class. The -7PCG44I is a direct same-footprint candidate when industrial temperature qualification is required. Before ordering, compare the complete ordering information and package drawing in AMD datasheet DS057 and retain the original programming configuration.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC9572XL-7PCG44C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC9572XL-7PCG44I | XC9572XL-10PCG44C | XC9572XL-15PCG44C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 44-terminal QCCJ square surface-mount package | 44-terminal QCCJ square surface-mount package | 44-terminal QCCJ square surface-mount package | 44-terminal QCCJ square surface-mount package |
| Device Type | CPLD | CPLD | CPLD | CPLD |
| Macrocell Count | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells |
| User I/O Count | 34 I/O | 34 I/O | 34 I/O | 34 I/O |
| Usable Gate Count | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates |
| Speed Grade | -7 | -7 | -10 | -15 |
| Temperature Grade | Commercial | Industrial | Commercial | Commercial |
| Programmability | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
주요 차별점
- Faster speed grade within the same package family (vs XC9572XL-10PCG44C)
- Commercial-temperature option with the same -7 timing class (vs XC9572XL-7PCG44I)
- Higher logic capacity than smaller legacy programmable devices (vs XC9572XL-15PCG44C)
설계 노트
Use the QCCJ package drawing and numbered pin table in AMD datasheet DS057 when assigning PCB nets and locating the programming interface. Do not infer a pinout from a similarly named VQG44 device because package codes and terminal arrangements can differ. Preserve the manufacturer’s land pattern, pin-1 orientation, and exposed or underside connection details where applicable, and verify pad dimensions against the package drawing before releasing artwork.
Treat the speed-grade suffix as a functional timing decision, not merely an inventory detail. The -7PCG44I preserves the -7 timing class, while the -10PCG44C and -15PCG44C alternatives provide reduced timing performance. Before substituting a lower-speed device, trace every clocked path and compare setup and hold requirements against the complete timing tables in DS057. Also confirm that the selected software release and programmer support the exact device suffix.
Design the 3.3 V supply and programming circuitry from the electrical-characteristics tables in AMD datasheet DS057. Confirm operating-current limits, I/O drive behavior, and any shared supply or configuration requirements across the installed system. Place local supply decoupling close to the device and route programming signals away from sensitive analog or high-speed digital paths. Verify absolute maximum ratings before attaching external equipment or programming fixtures to an assembled board.
Audit every external pin against the I/O timing and signal-integrity sections of DS057, especially clock inputs, asynchronous control signals, and outputs used by external buses. The stated 5 ns propagation delay is a device-class value and does not replace path-specific timing analysis. Use series termination where the datasheet or board-level signal-integrity analysis requires it, and ensure reset or configuration inputs remain in defined states during power-up and programming.
규정 준수 정보
The device is identified as RoHS compliant and lead-free. No automotive qualification or halogen-free statement was established.