XC9572XL-7PCG44C - 72-Macrocell 3.3V CPLD | AMD
MPN: XC9572XL-7PCG44C ✗ Cuối đờiXC9572XL-7PCG44C Tóm tắt
A CPLD is a programmable digital logic device that combines reconfigurable logic structures with nonvolatile configuration memory. In the broader semiconductor hierarchy, a CPLD belongs to programmable logic devices alongside FPGAs and PAL devices. It is positioned between simple fixed logic and larger FPGAs: designs can implement multiple state machines, interface controllers, counters, address decoding, and glue logic while retaining the programming tools and deterministic architecture associated with the XC9500XL family.
The XC9572XL-7PCG44C provides 72 macrocells, 34 user I/O pins, 1,600 usable gates, and four 54V18 function blocks. Its 3.3 V operating supply supports integration with contemporary CMOS control logic. In-system programmability supports at least 10,000 program or erase cycles, allowing the configuration to be updated without removing the device from its circuit. Commercial temperature grading and RoHS-compliant, lead-free construction suit industrial, communications, instrumentation, and embedded-control equipment.
The device uses a deterministic CPLD architecture in which interconnected macrocells implement combinational and registered logic. The -7 grade identifies its timing class, with a stated 5 ns propagation delay. This figure is useful for preliminary timing planning, but each design must also satisfy the setup, hold, clock, and I/O constraints in AMD datasheet DS057. The XC9572XL family was designed for compact logic consolidation and legacy programmable-logic migration.
Typical uses include peripheral interface logic, data-format conversion, bus arbitration, industrial control sequencing, test-instrument signal conditioning, and embedded communications. A design can combine several formerly discrete PAL, GAL, or small CPLD functions into one programmable device, reducing board area and simplifying firmware-managed configuration workflows. The 34 available I/O pins are especially useful for parallel buses, control signals, and status indicators.
Designers should treat configuration retention, pinout, supply sequencing, and timing constraints as the principal implementation checks. Confirm the exact package drawing and pin assignments in AMD datasheet DS057 before layout. Because this is a mature programmable-logic family, software-tool availability, programmer hardware, and lifecycle support should also be evaluated before committing a new production design.
This page combines device-level specifications, lifecycle considerations, pin and programming guidance, and qualified same-package comparison information to support legacy CPLD maintenance, cross-reference, and design-review decisions without replacing the manufacturer’s complete datasheet.
Bộ thay thế dễ dàng lắp đặt cho XC9572XL-7PCG44C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9572XL-7PCG44C (cùng hình factor và footprint) — khác nhau ở Mounting Type, RoHS Status, Temperature Grade.
XC9572XL-7PCG44I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9572XL-10PCG44C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572XL-15PCG44C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9572XL-7PCG44C Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Macrocell Count | 72 macrocells |
| User I/O Count | 34 I/O |
| Usable Gate Count | 1,600 gates |
| Function Block Count | 4 function blocks |
| Function Block Architecture | 54V18 architecture |
| Propagation Delay | 5 ns |
| Điện áp cung cấp | 3.3 V |
| Programming Type | In-system programmable |
| Program/Erase Endurance | At least 10,000 cycles |
| Temperature Grade | Commercial |
| Package Code | QCCJ |
| Package Shape | Square |
| Terminal Count | 44 terminals |
| Kiểu lắp đặt | J-bend surface mount |
| Lead-Free Status | Lead-free |
| Trạng thái RoHS | RoHS compliant |
Hướng dẫn cấu hình chân XC9572XL-7PCG44C square
Cấu hình chân cho XC9572XL-7PCG44C (square gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9572XL-7PCG44C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9572XL-7PCG44C phù hợp cho 6 Áp dụngs: Industrial Control and Sequencing, Peripheral Bus Interface Logic, Test and Measurement Instrumentation, Communications Interface Consolidation, Embedded System Glue Logic, Legacy Board Repair and Upgrade.
Industrial Control and Sequencing
The AMD XC9572XL-7PCG44C fits compact machine-control logic that coordinates sensors, actuators, interlocks, and operating states. Its 72 macrocells and four 54V18 function blocks can implement multiple state machines, debounce logic, counter chains, and sequencing rules without splitting the design across several devices. The 34 user I/O pins provide practical capacity for parallel control and status signals, while the 5 ns propagation delay supports short combinational paths. For installations with elevated ambient temperatures, compare the commercial-grade target with the industrial-grade XC9572XL-7PCG44I and confirm the enclosure temperature against the device limits.
Được đề xuất
Peripheral Bus Interface Logic
The XC9572XL-7PCG44C is suitable for implementing address decoding, bus arbitration, data-width conversion, and handshake logic between processors and peripheral devices. Its 34 user I/O pins can accommodate address, control, and data lanes for a compact parallel interface, while 1,600 usable gates provide room for protocol state machines and error handling. The deterministic CPLD architecture is useful where engineers want fixed, reviewable hardware behavior. Validate every timing path against AMD datasheet DS057, particularly when the target’s 5 ns propagation-delay grade is used to establish the design’s timing margin.
Được đề xuất
Test and Measurement Instrumentation
The AMD XC9572XL-7PCG44C can consolidate trigger sequencing, mode control, status decoding, and data-routing functions in laboratory instrumentation. Four function blocks and 72 macrocells allow designers to place multiple counters and state machines around a common control structure, while 34 I/O pins support front-panel controls, acquisition interfaces, and indicator signals. The commercial temperature grade fits controlled indoor equipment. Confirm the package pinout and input/output electrical characteristics in AMD datasheet DS057 because instrumentation designs often combine fast external signals with programmable control logic.
Được đề xuất
Communications Interface Consolidation
The XC9572XL-7PCG44C is appropriate for legacy communications equipment requiring deterministic framing, command parsing, and control logic around a processor or ASIC. Its 72 macrocells can absorb repeated framing counters, parity checks, buffer controls, and status flags, reducing reliance on scarce processor I/O. The 34 user I/O pins support parallel command and response paths, and in-system programmability allows controlled configuration updates with at least 10,000 program or erase cycles. Check signal timing, drive strength, and package-level constraints in DS057 rather than assuming that a general-purpose CPLD timing figure covers every external interface.
Được đề xuất
Embedded System Glue Logic
The AMD XC9572XL-7PCG44C can serve as an FPGA-like companion for systems that need a small amount of deterministic logic alongside a microcontroller or processor. Suitable tasks include startup sequencing, reset distribution, watchdog handling, interrupt arbitration, keypad scanning, and display multiplexing. Its 72 macrocells and 1,600 usable gates permit consolidation of several small functions, while the 34 I/O pins provide a practical boundary between the processor and peripherals. Use the target when the required paths need the -7 timing class; otherwise, evaluate the lower-speed same-package variants against the system clock and external timing requirements.
Được đề xuất
Legacy Board Repair and Upgrade
The XC9572XL-7PCG44C is useful when maintaining or replicating equipment built around the mature XC9572XL architecture. Its four function blocks, 72 macrocells, and nonvolatile in-system programmability make it possible to replace a failed CPLD without redesigning the surrounding board, provided the replacement has the correct package, pinout, voltage, temperature grade, and timing class. The -7PCG44I is a direct same-footprint candidate when industrial temperature qualification is required. Before ordering, compare the complete ordering information and package drawing in AMD datasheet DS057 and retain the original programming configuration.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC9572XL-7PCG44C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9572XL-7PCG44I | XC9572XL-10PCG44C | XC9572XL-15PCG44C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 44-terminal QCCJ square surface-mount package | 44-terminal QCCJ square surface-mount package | 44-terminal QCCJ square surface-mount package | 44-terminal QCCJ square surface-mount package |
| Device Type | CPLD | CPLD | CPLD | CPLD |
| Macrocell Count | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells |
| User I/O Count | 34 I/O | 34 I/O | 34 I/O | 34 I/O |
| Usable Gate Count | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates |
| Speed Grade | -7 | -7 | -10 | -15 |
| Temperature Grade | Commercial | Industrial | Commercial | Commercial |
| Programmability | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Bảo phân biệt quan trọng
- Faster speed grade within the same package family (vsXC9572XL-10PCG44C)
- Commercial-temperature option with the same -7 timing class (vsXC9572XL-7PCG44I)
- Higher logic capacity than smaller legacy programmable devices (vsXC9572XL-15PCG44C)
Ghi chú thiết kế
Use the QCCJ package drawing and numbered pin table in AMD datasheet DS057 when assigning PCB nets and locating the programming interface. Do not infer a pinout from a similarly named VQG44 device because package codes and terminal arrangements can differ. Preserve the manufacturer’s land pattern, pin-1 orientation, and exposed or underside connection details where applicable, and verify pad dimensions against the package drawing before releasing artwork.
Treat the speed-grade suffix as a functional timing decision, not merely an inventory detail. The -7PCG44I preserves the -7 timing class, while the -10PCG44C and -15PCG44C alternatives provide reduced timing performance. Before substituting a lower-speed device, trace every clocked path and compare setup and hold requirements against the complete timing tables in DS057. Also confirm that the selected software release and programmer support the exact device suffix.
Design the 3.3 V supply and programming circuitry from the electrical-characteristics tables in AMD datasheet DS057. Confirm operating-current limits, I/O drive behavior, and any shared supply or configuration requirements across the installed system. Place local supply decoupling close to the device and route programming signals away from sensitive analog or high-speed digital paths. Verify absolute maximum ratings before attaching external equipment or programming fixtures to an assembled board.
Audit every external pin against the I/O timing and signal-integrity sections of DS057, especially clock inputs, asynchronous control signals, and outputs used by external buses. The stated 5 ns propagation delay is a device-class value and does not replace path-specific timing analysis. Use series termination where the datasheet or board-level signal-integrity analysis requires it, and ensure reset or configuration inputs remain in defined states during power-up and programming.
Thông tin tuân thủ
The device is identified as RoHS compliant and lead-free. No automotive qualification or halogen-free statement was established.