XCKU025-1FFVA1156I - 20nm Kintex UltraScale FPGA | AMD
부품 번호: XCKU025-1FFVA1156I ✓ 활성XCKU025-1FFVA1156I 개요
An FPGA is a programmable digital integrated circuit whose logic fabric, programmable input/output blocks, block RAM, DSP slices, transceivers, and clocking resources can be configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic family, sits above fixed-function programmable logic devices, and provides a higher level of integration than discrete glue logic or application-specific standard ICs. This device gives engineers parallel hardware capability for parallel data acquisition, protocol handling, DSP, control logic, and high-speed interface aggregation.
The XCKU025 combines 318,150 logic cells with 312 user I/O in a 1.0 mm-ball-pitch FCBGA-1156 package. The device carries a 20 nm process designation and a 0.922 V minimum supply requirement. Its 312 I/O are suitable for parallel buses, sensor interfaces, memory interfaces, and custom high-speed logic, while the Kintex UltraScale architecture can implement pipelines, filters, transforms, and control functions in hardware.
The large 1156-ball package exposes substantially more device I/O and power-distribution connections than a smaller FPGA. It therefore requires a carefully engineered PCB with dense escape routing, controlled-impedance traces, multiple power rails, thorough decoupling, and thermal analysis. Package height is listed as 3.42 mm, and the industrial operating range is -40°C to 100°C. These package and environmental characteristics make board-level signal integrity and power planning as important as the RTL design itself.
Typical uses include high-speed data acquisition, radar and signal processing, wireless communication equipment, video image processing, industrial control, instrumentation, and digital signal processing accelerators. The device is particularly appropriate when deterministic parallel throughput is more valuable than minimizing board area or power. Designs using very high logic-cell counts should confirm utilization, timing closure, tool licensing, memory bandwidth, and power budget before layout release.
A key practical consideration is that the 1156-ball footprint is not a simple drop-in land pattern for a smaller FPGA. Existing designs must follow the AMD package pinout files and UG575 package guidance when assigning balls, power planes, and PCB escape paths. This page consolidates the core device specifications, package characteristics, comparison information, and engineering guidance needed for initial feasibility and board-planning work.
드롭인 대체품: XCKU025-1FFVA1156I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XCKU025-1FFVA1156I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Device Type, Speed Grade, Temperature Grade, Logic Cells.
XCKU025-1FFVA1156E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XCKU025-2FFVA1156E
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XCKU025-2FFVA1156I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XCKU025-1FFVA1156C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XCKU040-1FFVA1156I
✅ 드롭인가격 문의
데이터시트 보기 →XCKU025-1FFVA1156I 최대 정격 & 전기적 특성
| Device Type | Kintex UltraScale Field Programmable Gate Array (FPGA) |
| Logic Cells | 318,150 |
| User I/O Count | 312 pins |
| Programmable Gate Count | 13,004,800 |
| Process Technology | 20 nm |
| Minimum Supply Voltage | 0.922 V |
| Package Type | FCBGA-1156 |
| Ball Pitch | 1.0 mm |
| Package Height | 3.42 mm |
| 동작 온도 | -40°C to 100°C |
| Industrial Grade | Yes |
| Speed Grade | -1 |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
XCKU025-1FFVA1156I 3.42 mm 핀 구성 가이드
XCKU025-1FFVA1156I(3.42 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XCKU025-1FFVA1156I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XCKU025-1FFVA1156I 적합 용도: 6 애플리케이션s: High-Speed Data Acquisition, Radar and Signal Processing, Industrial Control and Automation, Wireless Communication Equipment, Video Image Processing, Instrumentation and Test Systems.
High-Speed Data Acquisition
The XCKU025-1FFVA1156I fits parallel data-acquisition systems that must capture, timestamp, filter, and route many sensor channels in hardware. Its 312 I/O provide substantial pin availability, while 318,150 logic cells can implement parallel-to-serial aggregation, trigger logic, digital filtering, and buffer management. A typical design uses the programmable logic fabric beside dedicated RAM and DSP resources rather than relying on the fabric for every operation. The 1156-ball footprint requires a multi-layer PCB with short escape routes and carefully separated clock and data regions. Use the AMD package pinout files for every ball assignment and verify that acquisition timing closes at the selected clock rate.
추천
Radar and Signal Processing
The XCKU025-1FFVA1156I is appropriate for radar and electronic-warfare signal-processing front ends that require parallel arithmetic, filtering, and decision logic. Its 318,150 logic cells can support parallel FFT, correlation, threshold-detection, and beamforming control pipelines, although designers should allocate DSP slices and block RAM rather than implement every operation in generic logic. The 312 I/O permit direct interface with converters, clocking devices, and parallel data fabric. High-speed designs require short package escape paths, controlled-impedance routing, and isolation between noisy converters and sensitive clock networks. Validate the full interface timing in the selected Vivado design flow.
추천
Industrial Control and Automation
The XCKU025-1FFVA1156I can consolidate machine-control sequencing, sensor conditioning, encoder handling, and communications gateways into one programmable platform. Its 312 I/O offer more interface flexibility than a small logic device, and 318,150 logic cells allow deterministic parallel control without offloading critical timing to a microcontroller. The -40°C to 100°C range supports many industrial environments when the enclosure thermal design is adequate. Keep high-current machine I/O away from sensitive FPGA supplies and use isolation or protection components where required. A design review should confirm timing margins, watchdog behavior, safe-state outputs, and thermal rise across the expected ambient range.
추천
Wireless Communication Equipment
The XCKU025-1FFVA1156I suits wireless infrastructure equipment requiring parallel baseband processing, packet handling, and multiple low-speed interfaces. Its large logic-cell count allows parallel filtering, symbol detection, scheduling, and protocol processing to be implemented in programmable logic, while 312 I/O support converters, memories, and management interfaces. The device is especially useful when deterministic latency and independent data paths matter more than minimum energy consumption. For radio designs, separate high-speed transceiver paths from sensitive clocking and keep supply-return currents controlled through the power plane. Confirm the specific transceiver resources, supported interfaces, and licensing requirements in the device documentation before architecture freeze.
추천
Video Image Processing
The XCKU025-1FFVA1156I can implement real-time image pipelines that perform sensor correction, color conversion, filtering, and data reduction before transmission to a host processor. Its 318,150 logic cells provide parallel capacity for line and pixel processing, while 312 I/O can accommodate video data, synchronization, configuration, and control paths. Resource allocation should favor DSP slices for multiply-accumulate operations and block RAM for line buffers. At video rates, PCB trace lengths, package-exit skew, and clock jitter become critical, so the routing plan must be developed with the pinout rather than after schematic completion. Validate timing and video timing margins with representative image resolution and frame-rate assumptions.
추천
Instrumentation and Test Systems
The XCKU025-1FFVA1156I supports laboratory and production-test instruments that combine pattern generation, timing control, acquisition, and analysis. Its 312 I/O and 318,150 logic cells allow multiple instrument channels to be time-aligned through one programmable fabric, reducing reliance on separate controllers for deterministic sequencing. Block RAM and DSP resources can support capture buffers, digital filters, and modulation or demodulation functions. Because instrument front ends often combine large analog swings with high-speed digital signals, keep return paths short and allocate separate routing regions for clocks, analog-adjacent interfaces, and digital outputs. Confirm calibration paths, trigger latency, and worst-case timing across every operating mode.
추천
추천 제품 요약
엔지니어링 참조 데이터: XCKU025-1FFVA1156I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XCKU025-1FFVA1156E | XCKU025-2FFVA1156E | XCKU025-2FFVA1156I | XCKU025-1FFVA1156C | XCKU040-1FFVA1156I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-1156 | FCBGA-1156 - same | FCBGA-1156 - same | FCBGA-1156 - same | FCBGA-1156 - same | FCBGA-1156 - same |
| Logic Cells | 318,150 | 318,150 | 318,150 | 318,150 | 318,150 | 530,250 |
| I/O Pins | 312 | 312 | 312 | 312 | 312 | 520 |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
| Speed Grade | -1 | -1 | -2 | -2 | -1 | -1 |
| Operating Temperature | -40°C to 100°C | 0°C to 100°C | 0°C to 100°C | -40°C to 100°C | 0°C to 100°C | -40°C to 100°C |
| Ball Pitch | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm | 1.0 mm |
주요 차별점
- Right-sized 312-I/O resource configuration (vs XCKU040-1FFVA1156I)
- Industrial-temperature option in the same family (vs XCKU025-1FFVA1156E)
- Lower speed grade with comparable resources (vs XCKU025-2FFVA1156I)
설계 노트
Plan the FCBGA-1156 escape routing from the AMD package pinout before placing external circuitry. At a 1.0 mm ball pitch, power, ground, configuration, clock, and high-speed signal balls must be routed to suitable via fields without violating current-density or manufacturing rules. Use the package-specific stack-up, escape examples, and UG575 guidance rather than extrapolating the board pattern from another BGA device.
Implement the complete multi-rail power architecture defined in the manufacturer power guidance, including correct sequencing, tolerances, decoupling, and supply-return paths. The listed 0.922 V value identifies only a minimum supply condition and does not describe every rail. Keep high-current switching supplies physically separated from sensitive reference and clock distribution, and verify voltage droop during maximum I/O activity.
Estimate junction temperature from total device power, package thermal characteristics, board copper, airflow, and the maximum ambient temperature. A 1156-ball package provides substantial electrical connectivity, but its thermal performance depends strongly on the PCB stack-up, inner planes, via arrays, and enclosure heat path. Test worst-case utilization and I/O activity because clock power and I/O activity can raise temperature beyond static logic estimates.
Do not treat a shared 1156-ball package as proof of automatic interchangeability. Compare ball assignments, dedicated power pins, configuration pins, clock pins, transceiver pins, and speed or temperature grades between devices. For an XCKU040 substitution, the larger I/O and logic-cell counts can change placement, power, thermal load, and design timing even when the physical package family remains the same.
규정 준수 정보
The LCSC product listing identifies the device as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or automotive-qualification statement appears in the available product records.