XMC4104F64F64BAXQMA1 - 80MHz Cortex-M4 64KB MCU | Infineon
부품 번호: XMC4104F64F64BAXQMA1 ✓ 활성XMC4104F64F64BAXQMA1 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. In the product hierarchy, this XMC part is an ARM Cortex-M4 microcontroller, an embedded 32-bit RISC controller, and an industrial microcontroller IC. The Cortex-M4 architecture is designed for compact control systems, while the XMC4000 family adds Infineon's industrial-oriented peripheral and connectivity ecosystem.
The principal verified characteristics are an 80 MHz Cortex-M4 core, 64 KB of embedded flash, 32-bit processing, and a 64-pin PG-TQFP-19 package. These attributes make the device applicable where deterministic embedded control, compact software support, and a relatively high pin count are useful. The exact RAM size, operating-voltage range, analog functions, digital peripherals, temperature limits, and package dimensions were not included in the supplied verified data and therefore require confirmation from the manufacturer datasheet.
The XMC4000 family is described by available sources as an industrial Cortex-M4 platform intended to combine processing performance with embedded-system functionality. Its architecture supports the familiar ARM Cortex-M software ecosystem, while the exact peripheral mapping and register-level behavior depend on the selected XMC4100/XMC4200-series derivative. Firmware development should therefore use the documentation and device support associated with the exact orderable part number rather than relying on family-level assumptions.
Typical use cases include industrial automation, sensor acquisition and control, motor or machine control, industrial communications, embedded gateway equipment, and compact control modules. The 64-pin package provides more external interface options than lower-pin-count Cortex-M4 devices, although the verified snippets do not identify which peripheral signals appear on each package pin. Designers should review the pinout, alternate-function matrix, power requirements, and exposed-pad connection before layout release.
A key design consideration is that the supplied evidence establishes the core frequency, flash capacity, architecture, and package, but not a complete electrical characterization. Power rails, decoupling, clock tolerance, ADC performance, communication interfaces, and timing margins must be checked against the authoritative XMC4000 datasheet. Firmware bring-up should also include appropriate startup configuration, watchdog handling, brownout behavior, and peripheral pin assignment.
This page combines verified distributor specifications, sourcing information, same-package replacement analysis, comparison parameters, and practical engineering cautions. It separates confirmed facts from unavailable data so engineers can rapidly identify the XMC4104F64F64BAXQMA1's role while avoiding unsupported assumptions about electrical ratings, peripheral functions, or drop-in compatibility.
드롭인 대체품: XMC4104F64F64BAXQMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XMC4108F64K64ABXQMA1
✅ 드롭인가격 문의
데이터시트 보기 →XMC4104F64F64BAXQMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Family | XMC4000 industrial microcontroller family |
| Processor Core | ARM Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory Size | 64 KB |
| Flash Organization | 64K x 8 bits |
| 패키지 | 64-pin PG-TQFP-19 |
| 실장 유형 | Surface mount |
| Device Series | XMC4100/XMC4200 series |
XMC4104F64F64BAXQMA1 64-pin pg-tqfp-19 핀 구성 가이드
XMC4104F64F64BAXQMA1(64-pin pg-tqfp-19 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC4104F64F64BAXQMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC4104F64F64BAXQMA1 적합 용도: 6 애플리케이션s: Industrial Automation Control, Sensor Acquisition and Signal Conditioning, Machine and Motor Control, Industrial Communication Gateway, Embedded Condition Monitoring, Industrial Power-Supply Controller.
Industrial Automation Control
The XMC4104F64F64BAXQMA1 fits compact industrial automation controllers because its 80 MHz ARM Cortex-M4 core provides deterministic 32-bit processing while 64 KB of flash stores control firmware and configuration. The 64-pin PG-TQFP-19 package offers more connection options than low-pin-count MCUs. A typical design would place it between field-side sensors or actuators and factory-level communication equipment. The available evidence does not specify the exact peripheral assignments, so engineers should verify required ADC, timer, serial, and I/O functions against the device pin table before committing the layout.
추천
Sensor Acquisition and Signal Conditioning
The 80 MHz Cortex-M4 core of the XMC4104F64F64BAXQMA1 is appropriate for acquiring and processing sensor data before forwarding it to a supervisory controller. Its 64 KB flash capacity can hold firmware for sampling, filtering, calibration, and fault detection, while the 64-pin package provides access to a comparatively broad external interface set. The actual ADC resolution, conversion rate, analog inputs, and digital sensor interfaces were not supplied, so the MCU should be selected only after those functions and the shared analog ground strategy have been confirmed in the manufacturer documentation.
추천
Machine and Motor Control
The XMC4104F64F64BAXQMA1 can serve as the central controller in a compact machine-control module because its 80 MHz Cortex-M4 core is suited to frequent control-loop execution. The 64 KB flash stores control algorithms, while the 64-pin package can expose timing, communication, and digital I/O connections. PWM channels, encoder interfaces, analog feedback paths, and complementary-output functions are not quantified in the verified snippets, so motor-control suitability depends on confirming the exact XMC4100-series derivative pinout and electrical characteristics before schematic design.
추천
Industrial Communication Gateway
For a compact industrial gateway, the XMC4104F64F64BAXQMA1 combines an 80 MHz 32-bit Cortex-M4 core with 64 KB of embedded flash in a 64-pin package. These characteristics suit protocol conversion, data framing, status monitoring, and local configuration storage. The verified listing does not identify CAN, Ethernet, USB, or other communication peripherals, so it would be incorrect to assume interface support from the package alone. Engineers should select the exact suffix and family member only after matching the required transceiver interfaces, protocol support, and pin multiplexing to the manufacturer documentation.
추천
Embedded Condition Monitoring
The XMC4104F64F64BAXQMA1 is suitable for a condition-monitoring node that samples equipment signals, performs local calculations, and reports machine status. Its 80 MHz processing rate supports time-based filtering and diagnostics, while 64 KB flash can hold a bootloader, application firmware, and calibration tables. The 64-pin package is useful when the monitor needs multiple digital inputs or communications links. Because sensor-input ranges, ADC performance, temperature limits, and isolation requirements are absent from the supplied evidence, the final design must include signal-conditioning and protection beyond the MCU itself.
추천
Industrial Power-Supply Controller
The XMC4104F64F64BAXQMA1 can supervise a compact industrial power-conversion module by sequencing operations, monitoring fault signals, and communicating system status. Its 80 MHz Cortex-M4 core provides enough arithmetic capability for supervisory control loops, and the 64 KB flash stores control state machines and diagnostic logic. The verified data does not confirm dedicated PWM, high-speed ADC, or digital-power-controller functions, so this application should use standard GPIO, timers, and communications only after verifying those resources and the board's operating-voltage limits.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC4104F64F64BAXQMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC4108F64K64ABXQMA1 |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | PG-TQFP-64-19 | PG-TQFP-64-19 |
| Product Family | XMC4000 | XMC4000 series |
| Application Segment | Industrial microcontroller | Industrial microcontroller |
주요 차별점
- Verified 80 MHz Cortex-M4 configuration (vs XMC4108F64K64ABXQMA1)
- Explicit 64 KB flash organization (vs XMC4108F64K64ABXQMA1)
- Confirmed industrial XMC4000 positioning (vs XMC4108F64K64ABXQMA1)
- Same documented 64-pin package family (vs XMC4108F64K64ABXQMA1)
설계 노트
Treat the XMC4104F64F64BAXQMA1 as a 64-pin PG-TQFP-19 device and verify every signal against the exact package pin table before routing. The verified distributor data establishes package type and pin count but does not provide pin names or alternate functions. Reserve positions for decoupling and exposed-pad handling as specified by the manufacturer, keep sensitive analog returns away from switching nodes, and follow the reference land pattern dimensions from the official package drawing rather than estimating from a generic TQFP footprint.
Do not select power-regulator components or set current limits from the 80 MHz and 64 KB flash figures, because those parameters do not define average or peak current consumption. Use the authoritative XMC4000 electrical table to determine supply range, sequencing, and brownout behavior. As a design estimate only, the board's supply should be checked against processor activity and all attached peripherals. This estimate is not a datasheet specification and must be validated on hardware under worst-case clock, temperature, and I/O conditions.
Do not assume that every ARM Cortex-M4 MCU with a 64-pin package is software- or pin-compatible with the XMC4104F64F64BAXQMA1. Boot pins, interrupt routing, analog functions, timer channels, communication mappings, and peripheral addresses can differ even when the CPU core and package match. If replacing the XMC4108F64K64ABXQMA1 or another candidate, perform a systematic pin-by-pin and register-by-register review, then compile the replacement firmware with the support package for the exact orderable MPN.
Keep the MCU supply return path continuous and place high-frequency decoupling capacitors at the relevant power pins using the manufacturer layout guidance. The available evidence does not identify the pin numbers or recommended capacitance, so those values must come from the datasheet rather than general practice. Route clocks and high-speed communications away from noisy power stages, provide test points for reset and boot configuration, and separate analog inputs from digital return currents where the device supports mixed-signal operation.
규정 준수 정보
The supplied verified distributor excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown pending review of the manufacturer product page and current material declarations.
