XMC4500F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
부품 번호: XMC4500F100K768ACXQMA1 ✓ 활성XMC4500F100K768ACXQMA1 개요
An ARM Cortex-M4 microcontroller is a 32-bit embedded processor that combines a processor core with memory interfaces, interrupt control, timers, communication peripherals and other programmable hardware. In the product hierarchy, the XMC4500 belongs to the XMC4000 family of industrial microcontrollers and combines real-time control capability with extensive communications and peripheral integration. It is intended for equipment requiring deterministic control and multiple communication interfaces without a separate external microcontroller.
The XMC4500F100K768ACXQMA1 combines a 120 MHz Cortex-M4 core with 768 KB of Flash in an LQFP-100 package. Its configurable peripheral set allows an industrial design to tailor I/O resources to a specific control system. Ethernet support expands the application range to connected industrial equipment, while CAN and LIN connectivity supports communication with sensors, actuators, service tools and other nodes on industrial networks.
This integration can reduce the number of discrete interface devices required around the main controller. A Cortex-M4-based architecture supports efficient execution of control tasks, communications stacks and supervisory functions in one device. The 100-pin LQFP package also exposes more I/O than small leadless packages, simplifying assembly for industrial prototypes and production lines equipped for conventional leaded-package soldering.
Typical applications include industrial motor drives, motion-control equipment, factory automation controllers, building automation nodes, Ethernet-connected machinery and CAN or LIN network gateways. The combination of 120 MHz processing, 768 KB of Flash and multiple communications options is useful when the controller must manage several real-time loops while exchanging diagnostic or supervisory data.
Hardware design should begin with the manufacturer's XMC4500 pin-description table, power and decoupling recommendations, and exposed-pad thermal layout. Place input and bulk capacitors close to their supply pins, connect the exposed pad to the appropriate ground-plane copper, and verify signal levels for all 1.3 V and 3.3 V interfaces before releasing a PCB for production.
This product page consolidates the confirmed controller identity, memory capacity, package, voltage options, communications features, sourcing information and design considerations into an engineering-focused reference. The ordering code remains the controlling identifier for package, temperature, qualification and delivery configuration, so designers should compare the complete suffix when qualifying a substitute.
드롭인 대체품: XMC4500F100K768ACXQMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XMC4500F100F768ACXQMA1
✅ 드롭인가격 문의
데이터시트 보기 →XMC4500-F100K768-AC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4500-F100F768-AC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4500F100K768ACXQMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit industrial ARM Cortex-M4 microcontroller |
| Series | XMC4000 |
| Device Family | XMC4500 |
| Processor Core | ARM Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 768 KB |
| Flash Organization | 768 K x 8 bits |
| Supply Voltage Options | 1.3 V and 3.3 V |
| Ethernet Support | Yes |
| CAN Support | Yes |
| LIN Support | Yes |
| 패키지 | 100-pin LQFP with exposed pad |
| 실장 유형 | Surface Mount |
| Ordering Package Form | Tray |
| Application Classification | Industrial |
XMC4500F100K768ACXQMA1 tray 핀 구성 가이드
XMC4500F100K768ACXQMA1(tray 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC4500F100K768ACXQMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC4500F100K768ACXQMA1 적합 용도: 6 애플리케이션s: Industrial Motor Drives, Factory Automation Controllers, Industrial Ethernet Gateways, Motion-Control Equipment, Building Automation Nodes, CAN and LIN Network Equipment.
Industrial Motor Drives
The XMC4500F100K768ACXQMA1 fits industrial motor-drive controllers that need a fast control loop, substantial embedded code storage and network connectivity. Its 120 MHz Arm Cortex-M4 core can execute position, speed and current-control tasks, while 768 KB of Flash accommodates application code, configuration and diagnostic routines. The configurable peripheral set lets engineers allocate timers, capture channels and communications resources to the motor-control architecture. CAN and LIN support also enable connection to sensors, operator interfaces and supervisory equipment. The LQFP-100 package provides a generous pin count for control signals, while its exposed pad requires deliberate thermal design. Firmware, peripheral mapping and board-level signal integrity should be validated against the complete manufacturer documentation.
추천
Factory Automation Controllers
For factory automation, the XMC4500F100K768ACXQMA1 combines real-time processing with Ethernet, CAN and LIN interfaces in a single 100-pin LQFP device. The 120 MHz Cortex-M4 core is suitable for coordinating machine sequences, interpreting sensor inputs and supervising actuators, while 768 KB of Flash provides capacity for control firmware and field configuration. Ethernet supports connection to plant-level supervisory systems, and CAN or LIN can serve local sensor and actuator networks. Its configurable peripheral set reduces the need to add separate interface controllers for less complex machine nodes. Designers should allocate the pins and peripheral resources required by the final control architecture, and they should validate timing, electrical levels and watchdog behavior during fault-injection testing.
추천
Industrial Ethernet Gateways
The XMC4500F100K768ACXQMA1 is appropriate for industrial Ethernet gateways that must translate between higher-level network traffic and local real-time equipment. Its 120 MHz Cortex-M4 core handles protocol processing and supervisory logic, and 768 KB of Flash accommodates gateway firmware, configuration data and communication services. CAN and LIN connectivity allows the same controller to bridge Ethernet to lower-speed industrial networks without requiring a separate communications processor. The 100-pin LQFP outline supports accessible assembly and exposes a broad selection of general-purpose and peripheral signals. A production gateway should reserve attention to Ethernet magnetics, isolation, connector mechanics, firmware update strategy and deterministic task scheduling, since the MCU's integration does not eliminate those system-level requirements.
추천
Motion-Control Equipment
The XMC4500F100K768ACXQMA1 supports motion-control equipment that combines deterministic real-time processing with communications and configurable peripherals. At 120 MHz, the Cortex-M4 core can execute multi-axis control algorithms, position loops and diagnostic functions, while 768 KB of Flash is suitable for control code and parameter storage. CAN and LIN links enable coordination with drives, sensors and service equipment, and Ethernet can carry supervisory commands where higher bandwidth is required. The 100-pin LQFP package provides access to a broad set of timing and communication signals for industrial motion platforms. Implementation should prioritize correct timer configuration, interrupt latency, encoder inputs and safe-state behavior. The exposed-pad thermal design and supply-decoupling layout should be reviewed before environmental qualification.
추천
Building Automation Nodes
The XMC4500F100K768ACXQMA1 can serve as a connected building-automation node that manages lighting, HVAC, access or environmental-control equipment. Its 120 MHz Cortex-M4 core provides ample performance for real-time I/O handling and communication tasks, while 768 KB of Flash supports application logic, schedules and update mechanisms. Ethernet offers a direct route to building-management systems, and CAN or LIN supports lower-level equipment buses. The configurable peripheral set allows a design to adapt available timers, serial interfaces and I/O to the installed building subsystem. In this application, low-power behavior, brownout recovery, secure firmware update and long-term supply availability should be evaluated alongside communication performance. The package's exposed pad should be connected according to the manufacturer's layout guidance to maintain electrical and thermal integrity.
추천
CAN and LIN Network Equipment
The XMC4500F100K768ACXQMA1 fits network equipment that acts as a CAN or LIN node while also supporting Ethernet management. The Arm Cortex-M4 core provides deterministic processing for message handling, diagnostics and application logic, and the 768 KB Flash capacity accommodates protocol stacks, configuration and application firmware. Its industrial communications integration allows designers to avoid separate interface logic for common factory, vehicle-adjacent or building networks. The 100-pin LQFP package also leaves sufficient pins for status indicators, configuration interfaces and industrial digital I/O. Designers must still account for transceiver selection, bus termination, isolation requirements, protection levels and network timing. Firmware should implement safe behavior for bus-off, malformed frames and communication loss, then validate it against the intended network topology.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC4500F100K768ACXQMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC4500F100F768ACXQMA1 | XMC4500-F100K768-AC | XMC4500-F100F768-AC |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | LQFP-100 with exposed pad | LQFP-100 with exposed pad | LQFP-100 | LQFP-100 |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 768 KB | 768 KB | 768 KB | 768 KB |
| Ethernet Support | Yes | Yes | Yes | Yes |
| Ordering Code | XMC4500F100K768ACXQMA1 | XMC4500F100F768ACXQMA1 | XMC4500-F100K768-AC | XMC4500-F100F768-AC |
주요 차별점
- Same confirmed performance and memory ratings as the F-code ordering option (vs XMC4500F100F768ACXQMA1)
- Direct base-ordering reference for the same device family (vs XMC4500-F100K768-AC)
- Integrated industrial communications in the selected controller (vs XMC4500-F100F768-AC)
설계 노트
Treat the LQFP exposed pad as an essential thermal and electrical feature. Follow the Infineon package drawing and recommended land pattern, provide a continuous ground connection where the package documentation permits it, and use multiple thermal vias within the pad region to reduce spreading resistance. Junction temperature depends on internal dissipation, ambient temperature, copper area and board construction, so calculate the worst-case thermal path rather than judging suitability from package size alone.
Place the controller's decoupling capacitors adjacent to the associated supply pins and keep the supply and ground paths short. Separate sensitive analog or signal inputs from high-current switching returns, and route Ethernet and other communications interfaces away from noisy power paths where possible. Use the manufacturer's reference layout to confirm exposed-pad geometry, via arrangement, test points and pin mapping before releasing the PCB.
Do not substitute the full XMC4500 ordering code using only the processor frequency and Flash capacity. Check the complete ordering table for the K versus F code, package form, temperature range, qualification and exposed-pad requirements. Because this is a configurable peripheral MCU, firmware startup code, pin multiplexing, clock setup and peripheral-instance allocation must also be reviewed when changing ordering options or reusing an existing PCB.
Assign external communications protection and termination according to the target network rather than relying on the MCU pins alone. For Ethernet, follow the controller and transceiver reference layouts for clock, differential pairs and return paths; for CAN or LIN, account for transceiver placement, bus stubs, protection components and isolation. Validate timing and signal margins with the intended peripheral clocks and bus topology.
Plan the 1.3 V and 3.3 V rails independently, including startup order, load current, transient response and brownout behavior for the connected system. Confirm the exact operating conditions and pin-level limits in the manufacturer datasheet for the selected suffix. The integrated controller may create high-frequency activity on digital interfaces, so supply filtering should be evaluated alongside clock and peripheral configuration.
규정 준수 정보
The device is classified as industrial, but the cited product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals status.