XMC4700F144F2048AAXQMA1 - 144MHz ARM MCU | Infineon
부품 번호: XMC4700F144F2048AAXQMA1 ✓ 활성XMC4700F144F2048AAXQMA1 개요
An ARM Cortex-M4 microcontroller is a 32-bit embedded processor that combines general-purpose control processing with single-precision floating-point arithmetic and digital signal processing instructions. Within the product hierarchy, this device belongs to the XMC4000 family of Arm Cortex-M4 microcontrollers, a series designed for industrial communications, motor-control platforms, factory automation, and connected embedded equipment. The Cortex-M4 architecture provides a conventional memory-mapped peripheral model while retaining deterministic interrupt-driven operation.
Three principal characteristics define the XMC4700F144F2048AAXQMA1: its 144 MHz Cortex-M4 core, 2 MB of embedded Flash for firmware and constants, and 352 KB of SRAM for working data. The Ethernet MAC adds hardware support for Ethernet-connected control systems without requiring those functions to be implemented entirely in software. The 144-pin LQFP package exposes substantially more I/O than small-outline packages, making the device appropriate for boards combining digital control, analog interfaces, communications, and external memory.
The XMC4700 architecture extends the Cortex-M4 core with an Ethernet MAC, high-speed USB, CAN, and additional industrial peripherals. According to the Infineon XMC4700/XMC4800 datasheet and reference manual, the family is intended for energy-efficient embedded-control applications requiring higher processing performance and DSP/FPU capability. Firmware can use the Cortex-M4 hardware floating-point unit for control loops and signal calculations instead of implementing those operations in integer-only software.
Typical uses include industrial Ethernet controllers, factory automation nodes, motor-control and power-conversion equipment, communications infrastructure, and embedded gateways. In an Ethernet application, the MCU can manage control tasks while the MAC handles packet processing. Its large Flash capacity supports network stacks, boot code, application firmware, and configuration data, while the 352 KB SRAM provides space for protocol buffers and real-time working sets.
Board design must account for the exposed thermal pad, analog supply requirements, high-speed communication impedance control, and the numerous power and ground pins. Place decoupling capacitors close to their associated supply pins, provide continuous ground-plane coverage beneath the device, and follow the manufacturer’s reference-layout and pin-multiplexing guidance. The exposed pad should be connected according to the package drawing and thermal requirements rather than treated as an unused lead.
This product page combines manufacturer specifications, verified ordering information, practical interface-planning guidance, and a qualified comparison with the closest identified Infineon ordering variant. It also highlights the Ethernet MAC, Cortex-M4 DSP/FPU capability, memory capacity, package constraints, and the engineering checks that matter most when replacing or redesigning around the XMC4700F144F2048AAXQMA1.
드롭인 대체품: XMC4700F144F2048AAXQMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XMC4700F144K2048AAXQMA1
✅ 드롭인가격 문의
데이터시트 보기 →XMC4700F144F2048AAXQMA1 최대 정격 & 전기적 특성
| Device Type | Industrial 32-bit microcontroller |
| Processor Core | ARM Cortex-M4 |
| CPU Bit Width | 32 bit |
| Maximum CPU Frequency | 144 MHz |
| Embedded Flash Memory | 2 MB (2M x 8) |
| Static RAM | 352 KB |
| Ethernet Interface | Ethernet MAC |
| 동작 공급 전압 | 3.3 V |
| 패키지 | PG-LQFP-144-24 |
| Package Pin Count | 144 pins |
| Thermal Pad | Exposed pad |
| 실장 유형 | Surface mount |
| Architecture | ARM Cortex-M4 with DSP and FPU capability |
| Product Family | XMC4000 |
| Application Class | Industrial embedded control |
XMC4700F144F2048AAXQMA1 144 pins 핀 구성 가이드
XMC4700F144F2048AAXQMA1(144 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC4700F144F2048AAXQMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC4700F144F2048AAXQMA1 적합 용도: 6 애플리케이션s: Industrial Ethernet Control Nodes, Factory Automation Equipment, Motor Control and Power Conversion, Building and Energy Gateways, Communications Infrastructure, Test and Measurement Instruments.
Industrial Ethernet Control Nodes
The XMC4700F144F2048AAXQMA1 fits industrial Ethernet controllers that require both deterministic embedded control and network communication. Its 144 MHz ARM Cortex-M4 core handles protocols and supervisory logic, while the integrated Ethernet MAC supports connected equipment. The 2 MB of Flash accommodates a boot loader, Ethernet stack, diagnostics, and application firmware, and 352 KB of RAM supports packet buffers and real-time control variables. Use a 3.3 V regulated rail with local decoupling at every supply connection and preserve the manufacturer’s exposed-pad and high-speed layout guidance.
추천
Factory Automation Equipment
The XMC4700F144F2048AAXQMA1 is suitable for factory automation modules that coordinate sensors, actuators, machine communications, and local diagnostics. Its 144 MHz Cortex-M4 processor provides deterministic real-time control alongside DSP and floating-point execution, while the large PG-LQFP-144 package offers extensive I/O for discrete machine interfaces. The 2 MB Flash budget supports layered control software and configuration, and the Ethernet MAC enables supervisory communication. Validate industrial temperature requirements and signal isolation at the board level before deployment.
추천
Motor Control and Power Conversion
The XMC4700F144F2048AAXQMA1 can serve as the supervisory controller in a digital motor-control or power-conversion platform. The Cortex-M4 DSP instructions and floating-point unit improve control-algorithm efficiency at a 144 MHz clock, while Ethernet MAC support enables remote parameter management and monitoring. Two megabytes of Flash can retain control tables, calibration data, fault logs, and communication firmware, and 352 KB of RAM can hold control-loop and communications working sets. External power stages require separate protection, sensing, and thermal design beyond the MCU package.
추천
Building and Energy Gateways
The XMC4700F144F2048AAXQMA1 fits energy gateways that collect equipment status, coordinate local control functions, and forward information over an Ethernet network. Its Cortex-M4 performance supports protocol processing and real-time supervision, while 2 MB of Flash provides room for networking stacks and application logic. The Ethernet MAC simplifies connected gateway designs, and the 144-pin LQFP package exposes the I/O required for metering inputs, status indicators, and service interfaces. Apply appropriate galvanic isolation, surge protection, and safety partitioning at the system boundary.
추천
Communications Infrastructure
The XMC4700F144F2048AAXQMA1 is applicable to communications infrastructure controllers that combine network termination, board diagnostics, configuration management, and real-time monitoring. Its 144 MHz 32-bit Cortex-M4 core can manage control-plane tasks, and 2 MB of Flash supports firmware, protocol tables, and bootloader redundancy. The Ethernet MAC provides a hardware communications foundation, while 352 KB of RAM accommodates packet and control buffers. Maintain controlled-impedance routing for Ethernet interfaces and comply with the manufacturer’s clock, decoupling, and exposed-pad requirements.
추천
Test and Measurement Instruments
The XMC4700F144F2048AAXQMA1 can form the control core of a test or measurement instrument requiring responsive user-interface logic, data acquisition supervision, and Ethernet-based remote control. The 144 MHz Cortex-M4 core supports DSP and floating-point operations, while the 2 MB Flash capacity accommodates firmware, lookup data, and instrument configuration. Its Ethernet MAC enables results reporting and remote diagnostics, and the extensive 144-pin package provides access to high-speed and mixed-signal-adjacent functions. Sensitive analog sections should remain partitioned and properly referenced according to the manufacturer guidance.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC4700F144F2048AAXQMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC4700F144K2048AAXQMA1 |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-144-24 | PG-LQFP-144-24 |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 144 MHz | 144 MHz |
| CPU Bit Width | 32 bit | 32 bit |
| Embedded Flash Memory | 2048 KB | 2048 KB |
| Ethernet Interface | Ethernet MAC | Ethernet MAC |
| Operating Supply Voltage | 3.3 V | 3.3 V |
| Product Family | XMC4000 | XMC4000 |
주요 차별점
- Matches the closest identified Infineon variant on core performance (vs XMC4700F144K2048AAXQMA1)
- Provides the same XMC4000 communication foundation (vs XMC4700F144K2048AAXQMA1)
- Uses the same high-pin-count exposed-pad land pattern (vs XMC4700F144K2048AAXQMA1)
설계 노트
Build the 3.3 V supply network around the Infineon recommended decoupling and pin-connection requirements. Place the required local capacitors directly beside their associated supply pins, use short and wide return paths, and provide multiple ground-plane connections around the exposed pad. Avoid sharing narrow supply traces between high-speed peripherals and the Cortex-M4 core because transient current can create local voltage disturbance even when the laboratory supply remains within range.
Treat the PG-LQFP-144-24 exposed pad as a thermal and electrical feature rather than an optional mechanical detail. Connect it to the ground plane using the manufacturer’s land pattern and provide thermal vias where the package drawing permits them. Validate the final junction temperature with the actual PCB copper area, enclosure, ambient temperature, and processor duty cycle. Although the device is specified for 3.3 V operation, continuous control-loop workload can produce more heat than a low-duty monitoring workload.
Use the manufacturer pin-description table to assign the many multiplexed XMC4700 signals because the numerical port designation does not by itself identify the final peripheral function. Keep high-speed communication and clock routes short, avoid routing them beneath noisy switching nodes, and maintain the recommended spacing to analog and power circuitry. The 144-pin footprint provides extensive I/O, so a logical grouping of pins during schematic capture and a disciplined review against the package drawing can prevent costly board respins.
Apply the Infineon reference-layout rules for Ethernet and other high-speed interfaces, including controlled-impedance routing, continuous reference planes, and avoidance of split-plane crossings. Place interface protection close to external connectors, and keep its return current within the same reference plane. Although the XMC4700 includes an Ethernet MAC, the external PHY, magnetics, isolation network, and board-level signal conditioning remain separate design elements that require their own impedance and EMC validation.
Do not substitute an ordering-code variant solely because its catalog description matches the CPU frequency, Flash size, and package. Confirm the decoded F-versus-K attributes, temperature range, qualification class, pin multiplexing, and exposed-pad requirements for the exact suffix. Also verify the 3.3 V supply tolerance and peripheral-specific clock requirements in the manufacturer datasheet before schematic release.
규정 준수 정보
The Infineon ordering information identifies the device as an industrial microcontroller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Confirm current compliance documentation with Infineon before procurement.